| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 14 Mar 2008 13:30:59 -0700
From: john stultz <johnstul@...ibm.com>
To: zippel@...ux-m68k.org
Cc: linux-kernel@...r.kernel.org, akpm@...ux-foundation.org,
Ingo Molnar <mingo@...e.hu>
Subject: Re: [PATCH 1/8] cleanup ntp.c
On Fri, 2008-03-14 at 19:40 +0100, zippel@...ux-m68k.org wrote:
> plain text document attachment (update_offset)
> This is mostly a style cleanup of ntp.c and extracts part of do_adjtimex
> as ntp_update_offset(). Otherwise the functionality is still the same as
> before.
>
> Signed-off-by: Roman Zippel <zippel@...ux-m68k.org>
Ah crud. Ingo sent very similar changes to me a few weeks ago, and I've
been too pinched for time to test and send them out.
I'll spend some time today to layer his fixes as well as my own cleanups
on top.
Minor nits below:
Otherwise looks good (although I've not tested it).
-john
> ---
> kernel/time/ntp.c | 171 ++++++++++++++++++++++++++++--------------------------
> 1 file changed, 90 insertions(+), 81 deletions(-)
>
> Index: linux-2.6-mm/kernel/time/ntp.c
> ===================================================================
> --- linux-2.6-mm.orig/kernel/time/ntp.c
> +++ linux-2.6-mm/kernel/time/ntp.c
> @@ -35,7 +35,7 @@ static u64 tick_length, tick_length_base
> /* TIME_ERROR prevents overwriting the CMOS clock */
> static int time_state = TIME_OK; /* clock synchronization status */
> int time_status = STA_UNSYNC; /* clock status bits */
> -static s64 time_offset; /* time adjustment (ns) */
> +static s64 time_offset; /* time adjustment (ns) */
> static long time_constant = 2; /* pll time constant */
> long time_maxerror = NTP_PHASE_LIMIT; /* maximum error (us) */
> long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */
> @@ -57,6 +57,44 @@ static void ntp_update_frequency(void)
> tick_length_base = div_u64(tick_length_base, NTP_INTERVAL_FREQ);
> }
>
> +static void ntp_update_offset(long offset)
> +{
> + long mtemp;
Could we change this to a more descriptive name?
Maybe last_update_interval?
> + s64 freq_adj;
> +
> + if (!(time_status & STA_PLL))
> + return;
> +
> + time_offset = offset * NSEC_PER_USEC;
> +
> + /*
> + * Scale the phase adjustment and
> + * clamp to the operating range.
> + */
> + time_offset = min(time_offset, (s64)MAXPHASE * NSEC_PER_USEC);
> + time_offset = max(time_offset, (s64)-MAXPHASE * NSEC_PER_USEC);
> +
> + /*
> + * Select how the frequency is to be controlled
> + * and in which mode (PLL or FLL).
> + */
> + if (time_status & STA_FREQHOLD || time_reftime == 0)
> + time_reftime = xtime.tv_sec;
> + mtemp = xtime.tv_sec - time_reftime;
> + time_reftime = xtime.tv_sec;
> +
> + freq_adj = time_offset * mtemp;
> + freq_adj = shift_right(freq_adj, time_constant * 2 +
> + (SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
> + if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC))
> + freq_adj += div_s64(time_offset << (SHIFT_NSEC - SHIFT_FLL), mtemp);
> + freq_adj += time_freq;
> + freq_adj = min(freq_adj, (s64)MAXFREQ_NSEC);
> + time_freq = max(freq_adj, (s64)-MAXFREQ_NSEC);
> + time_offset = div_s64(time_offset, NTP_INTERVAL_FREQ);
> + time_offset <<= SHIFT_UPDATE;
> +}
> +
> /**
> * ntp_clear - Clears the NTP state variables
> *
> @@ -131,7 +169,7 @@ void second_overflow(void)
> break;
> case TIME_WAIT:
> if (!(time_status & (STA_INS | STA_DEL)))
> - time_state = TIME_OK;
> + time_state = TIME_OK;
> }
>
> /*
> @@ -234,8 +272,7 @@ static inline void notify_cmos_timer(voi
> */
> int do_adjtimex(struct timex *txc)
> {
> - long mtemp, save_adjust;
> - s64 freq_adj;
> + long save_adjust;
> int result;
>
> /* In order to modify anything, you gotta be super-user! */
> @@ -272,94 +309,63 @@ int do_adjtimex(struct timex *txc)
> time_status &= ~STA_CLOCKERR; /* reset STA_CLOCKERR */
> #endif
> /* If there are input parameters, then process them */
> - if (txc->modes)
> - {
> - if (txc->modes & ADJ_STATUS) /* only set allowed bits */
> - time_status = (txc->status & ~STA_RONLY) |
> - (time_status & STA_RONLY);
> -
> - if (txc->modes & ADJ_FREQUENCY) { /* p. 22 */
> - if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
> - result = -EINVAL;
> - goto leave;
> + if (txc->modes) {
> + if (txc->modes & ADJ_STATUS) /* only set allowed bits */
> + time_status = (txc->status & ~STA_RONLY) |
> + (time_status & STA_RONLY);
> +
> + if (txc->modes & ADJ_FREQUENCY) {
> + if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
> + result = -EINVAL;
> + goto leave;
> + }
> + time_freq = ((s64)txc->freq * NSEC_PER_USEC)
> + >> (SHIFT_USEC - SHIFT_NSEC);
> }
> - time_freq = ((s64)txc->freq * NSEC_PER_USEC)
> - >> (SHIFT_USEC - SHIFT_NSEC);
> - }
> -
> - if (txc->modes & ADJ_MAXERROR) {
> - if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
> - result = -EINVAL;
> - goto leave;
> +
> + if (txc->modes & ADJ_MAXERROR) {
> + if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
> + result = -EINVAL;
> + goto leave;
> + }
> + time_maxerror = txc->maxerror;
> }
> - time_maxerror = txc->maxerror;
> - }
>
> - if (txc->modes & ADJ_ESTERROR) {
> - if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
> - result = -EINVAL;
> - goto leave;
> + if (txc->modes & ADJ_ESTERROR) {
> + if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
> + result = -EINVAL;
> + goto leave;
> + }
> + time_esterror = txc->esterror;
> }
> - time_esterror = txc->esterror;
> - }
>
> - if (txc->modes & ADJ_TIMECONST) { /* p. 24 */
> - if (txc->constant < 0) { /* NTP v4 uses values > 6 */
> - result = -EINVAL;
> - goto leave;
> + if (txc->modes & ADJ_TIMECONST) {
> + if (txc->constant < 0) { /* NTP v4 uses values > 6 */
> + result = -EINVAL;
> + goto leave;
> + }
> + time_constant = min(txc->constant + 4, (long)MAXTC);
> }
> - time_constant = min(txc->constant + 4, (long)MAXTC);
> - }
>
> - if (txc->modes & ADJ_OFFSET) { /* values checked earlier */
> - if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
> - /* adjtime() is independent from ntp_adjtime() */
> - time_adjust = txc->offset;
> + if (txc->modes & ADJ_OFFSET) {
> + if (txc->modes == ADJ_OFFSET_SINGLESHOT)
> + /* adjtime() is independent from ntp_adjtime() */
> + time_adjust = txc->offset;
> + else
> + ntp_update_offset(txc->offset);
> }
> - else if (time_status & STA_PLL) {
> - time_offset = txc->offset * NSEC_PER_USEC;
> + if (txc->modes & ADJ_TICK)
> + tick_usec = txc->tick;
>
> - /*
> - * Scale the phase adjustment and
> - * clamp to the operating range.
> - */
> - time_offset = min(time_offset, (s64)MAXPHASE * NSEC_PER_USEC);
> - time_offset = max(time_offset, (s64)-MAXPHASE * NSEC_PER_USEC);
> -
> - /*
> - * Select whether the frequency is to be controlled
> - * and in which mode (PLL or FLL). Clamp to the operating
> - * range. Ugly multiply/divide should be replaced someday.
> - */
> -
> - if (time_status & STA_FREQHOLD || time_reftime == 0)
> - time_reftime = xtime.tv_sec;
> - mtemp = xtime.tv_sec - time_reftime;
> - time_reftime = xtime.tv_sec;
> -
> - freq_adj = time_offset * mtemp;
> - freq_adj = shift_right(freq_adj, time_constant * 2 +
> - (SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
> - if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC))
> - freq_adj += div_s64(time_offset << (SHIFT_NSEC - SHIFT_FLL), mtemp);
> - freq_adj += time_freq;
> - freq_adj = min(freq_adj, (s64)MAXFREQ_NSEC);
> - time_freq = max(freq_adj, (s64)-MAXFREQ_NSEC);
> - time_offset = div_s64(time_offset, NTP_INTERVAL_FREQ);
> - time_offset <<= SHIFT_UPDATE;
> - } /* STA_PLL */
> - } /* txc->modes & ADJ_OFFSET */
> - if (txc->modes & ADJ_TICK)
> - tick_usec = txc->tick;
> -
> - if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
> - ntp_update_frequency();
> - } /* txc->modes */
> -leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
> + if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
> + ntp_update_frequency();
> + }
> +leave:
> + if (time_status & (STA_UNSYNC|STA_CLOCKERR))
> result = TIME_ERROR;
>
> if ((txc->modes == ADJ_OFFSET_SINGLESHOT) ||
> - (txc->modes == ADJ_OFFSET_SS_READ))
> + (txc->modes == ADJ_OFFSET_SS_READ))
> txc->offset = save_adjust;
> else
> txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
> @@ -384,9 +390,12 @@ leave: if ((time_status & (STA_UNSYNC|ST
> txc->errcnt = 0;
> txc->stbcnt = 0;
> write_sequnlock_irq(&xtime_lock);
> +
> do_gettimeofday(&txc->time);
> +
> notify_cmos_timer();
> - return(result);
> +
> + return result;
> }
>
> static int __init ntp_tick_adj_setup(char *str)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists