[ 0.000000] Linux version 2.6.24.3reiser4 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Sun Mar 16 20:32:58 CET 2008 [ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] end_pfn_map = 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 853 pages reserved [ 0.000000] DMA zone: 3090 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffc0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 00000000cfff0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff380000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 31408 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030522 [ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 27.321929] Marking TSC unstable due to TSCs unsynchronized [ 27.321931] time.c: Detected 3013.888 MHz processor. [ 27.325755] Console: colour VGA+ 80x25 [ 27.325757] console [tty6] enabled [ 27.330363] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 27.332590] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 27.333357] Checking aperture... [ 27.333395] CPU 0: aperture @ ecc8000000 size 32 MB [ 27.333433] Aperture too small (32 MB) [ 27.339291] No AGP bridge found [ 27.339327] Your BIOS doesn't leave a aperture memory hole [ 27.339365] Please enable the IOMMU option in the BIOS setup [ 27.339403] This costs you 64 MB of RAM [ 27.364634] Mapping aperture over 65536 KB of RAM @ 8000000 [ 27.388765] Memory: 4049948k/4980736k available (2192k kernel code, 143428k reserved, 681k data, 176k init) [ 27.388833] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 27.471580] Calibrating delay using timer specific routine.. 6034.70 BogoMIPS (lpj=10053931) [ 27.471673] Mount-cache hash table entries: 256 [ 27.471780] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.471819] CPU: L2 Cache: 1024K (64 bytes/line) [ 27.471857] CPU: Physical Processor ID: 0 [ 27.471894] CPU: Processor Core ID: 0 [ 27.471947] SMP alternatives: switching to UP code [ 27.472310] ACPI: Core revision 20070126 [ 27.507485] Using local APIC timer interrupts. [ 27.540630] APIC timer calibration result 12557876 [ 27.540631] Detected 12.557 MHz APIC timer. [ 27.540716] SMP alternatives: switching to SMP code [ 27.540945] Booting processor 1/2 APIC 0x1 [ 27.551054] Initializing CPU#1 [ 27.633818] Calibrating delay using timer specific routine.. 6030.92 BogoMIPS (lpj=10046282) [ 27.633822] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.633824] CPU: L2 Cache: 1024K (64 bytes/line) [ 27.633826] CPU: Physical Processor ID: 0 [ 27.633827] CPU: Processor Core ID: 1 [ 27.633908] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 27.633973] Brought up 2 CPUs [ 27.634431] net_namespace: 120 bytes [ 27.634663] NET: Registered protocol family 16 [ 27.634775] ACPI: bus type pci registered [ 27.634857] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 27.634896] PCI: Not using MMCONFIG. [ 27.634932] PCI: Using configuration type 1 [ 27.637173] ACPI: EC: Look up EC in DSDT [ 27.640624] ACPI: Interpreter enabled [ 27.640662] ACPI: (supports S0 S1 S3 S4 S5) [ 27.640832] ACPI: Using IOAPIC for interrupt routing [ 27.641040] Error attaching device data [ 27.641080] Error attaching device data [ 27.641118] Error attaching device data [ 27.641157] Error attaching device data [ 27.646070] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.646594] PCI: Transparent bridge - 0000:00:08.0 [ 27.646888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.647020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 27.647117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 27.647173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 27.647227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 27.647283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 27.651219] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 27.651555] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 27.651889] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 27.652249] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 27.652609] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 27.652968] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 27.653301] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 27.653661] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 27.653997] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 27.654331] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 27.654690] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 27.655024] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 27.655383] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 27.655744] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 27.656077] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 27.656437] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 27.656772] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 27.657169] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 27.657528] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 27.657889] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 27.658207] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.658260] pnp: PnP ACPI init [ 27.658299] ACPI: bus type pnp registered [ 27.660838] pnp: PnP ACPI: found 13 devices [ 27.660875] ACPI: ACPI bus type pnp unregistered [ 27.660998] SCSI subsystem initialized [ 27.661055] libata version 3.00 loaded. [ 27.661105] usbcore: registered new interface driver usbfs [ 27.661161] usbcore: registered new interface driver hub [ 27.661218] usbcore: registered new device driver usb [ 27.661301] PCI: Using ACPI for IRQ routing [ 27.661339] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.670423] PCI-DMA: Disabling AGP. [ 27.671160] PCI-DMA: aperture base @ 8000000 size 65536 KB [ 27.671202] PCI-DMA: using GART IOMMU. [ 27.671241] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 27.671400] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 27.671539] hpet0: 3 32-bit timers, 25000000 Hz [ 27.673708] Time: hpet clocksource has been installed. [ 27.673757] Switched to high resolution mode on CPU 0 [ 27.673837] Switched to high resolution mode on CPU 1 [ 27.680440] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 27.680480] system 00:05: ioport range 0x800-0x80f has been reserved [ 27.680519] system 00:05: ioport range 0x2000-0x207f has been reserved [ 27.680559] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 27.683951] system 00:05: ioport range 0x2400-0x247f has been reserved [ 27.683990] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 27.684030] system 00:05: ioport range 0x2800-0x287f has been reserved [ 27.684069] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 27.684108] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 27.684148] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 27.684187] system 00:05: iomem range 0x0-0x0 could not be reserved [ 27.684227] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 27.684271] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 27.684318] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved [ 27.684369] system 00:0a: ioport range 0x290-0x29f has been reserved [ 27.684411] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 27.684457] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 27.684496] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 27.684535] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 27.684579] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [ 27.684626] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved [ 27.684908] PCI: Bridge: 0000:00:08.0 [ 27.684945] IO window: d000-dfff [ 27.684982] MEM window: f9f00000-f9ffffff [ 27.685020] PREFETCH window: disabled. [ 27.685057] PCI: Bridge: 0000:00:0b.0 [ 27.685094] IO window: c000-cfff [ 27.685130] MEM window: f9e00000-f9efffff [ 27.685167] PREFETCH window: disabled. [ 27.685204] PCI: Bridge: 0000:00:0c.0 [ 27.685240] IO window: disabled. [ 27.685277] MEM window: disabled. [ 27.685313] PREFETCH window: disabled. [ 27.685350] PCI: Bridge: 0000:00:0d.0 [ 27.685386] IO window: e000-efff [ 27.685423] MEM window: fa000000-febfffff [ 27.685460] PREFETCH window: d0000000-dfffffff [ 27.685497] PCI: Bridge: 0000:00:0e.0 [ 27.685534] IO window: disabled. [ 27.685570] MEM window: disabled. [ 27.685606] PREFETCH window: disabled. [ 27.685649] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 27.685657] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 27.685662] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 27.685667] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 27.685672] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 27.685678] NET: Registered protocol family 2 [ 27.717007] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.717603] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 27.719026] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 27.719509] TCP: Hash tables configured (established 262144 bind 65536) [ 27.719549] TCP reno registered [ 27.727790] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 27.727894] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 27.727942] io scheduler noop registered [ 27.727980] io scheduler cfq registered (default) [ 27.728676] Boot video device is 0000:04:00.0 [ 27.728779] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 27.728796] assign_interrupt_mode Found MSI capability [ 27.728849] Allocate Port Service[0000:00:0b.0:pcie00] [ 27.728891] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 27.728907] assign_interrupt_mode Found MSI capability [ 27.728955] Allocate Port Service[0000:00:0c.0:pcie00] [ 27.728992] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 27.729008] assign_interrupt_mode Found MSI capability [ 27.729056] Allocate Port Service[0000:00:0d.0:pcie00] [ 27.729094] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 27.729110] assign_interrupt_mode Found MSI capability [ 27.729158] Allocate Port Service[0000:00:0e.0:pcie00] [ 27.729331] input: Power Button (FF) as /class/input/input0 [ 27.729369] ACPI: Power Button (FF) [PWRF] [ 27.729455] input: Power Button (CM) as /class/input/input1 [ 27.729493] ACPI: Power Button (CM) [PWRB] [ 27.729627] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 27.729732] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 27.753629] Real Time Clock Driver v1.12ac [ 27.753749] hpet_resources: 0xfed00000 is busy [ 27.753766] Linux agpgart interface v0.102 [ 27.753851] Driver 'sd' needs updating - please use bus_type methods [ 27.753925] ahci 0000:00:0a.0: version 3.0 [ 27.754100] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 27.754143] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 28.754676] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 28.754728] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 28.754767] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 28.754969] scsi0 : ahci [ 28.755064] scsi1 : ahci [ 28.755130] scsi2 : ahci [ 28.755196] scsi3 : ahci [ 28.755284] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315 [ 28.755332] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315 [ 28.755379] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315 [ 28.755426] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315 [ 29.386629] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 29.387240] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 29.387283] ata1.00: 312581808 sectors, multi 16: LBA48 [ 29.387918] ata1.00: configured for UDMA/133 [ 30.018591] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 30.039146] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 30.039186] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 30.041191] ata2.00: configured for UDMA/133 [ 30.357854] ata3: SATA link down (SStatus 0 SControl 300) [ 30.677160] ata4: SATA link down (SStatus 0 SControl 300) [ 30.677249] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5 [ 30.677359] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 30.677404] sd 0:0:0:0: [sda] Write Protect is off [ 30.677442] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.677450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.677520] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 30.677563] sd 0:0:0:0: [sda] Write Protect is off [ 30.677601] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.677608] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.677657] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 30.713124] sd 0:0:0:0: [sda] Attached SCSI disk [ 30.713259] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 30.713368] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 30.713412] sd 1:0:0:0: [sdb] Write Protect is off [ 30.713450] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 30.713459] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.713529] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 30.713572] sd 1:0:0:0: [sdb] Write Protect is off [ 30.713610] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 30.713617] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.713666] sdb: sdb1 sdb2 [ 30.720847] sd 1:0:0:0: [sdb] Attached SCSI disk [ 30.720984] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 30.723565] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.723604] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 30.757909] usbcore: registered new interface driver usbhid [ 30.757947] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 30.757991] TCP cubic registered [ 30.758030] NET: Registered protocol family 1 [ 30.758087] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 30.758143] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 30.758183] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 30.758221] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 30.758259] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 30.758297] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 30.758335] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 30.758373] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 30.758411] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 30.785840] input: AT Translated Set 2 keyboard as /class/input/input2 [ 30.884040] ReiserFS: sda3: found reiserfs format "3.6" with standard journal [ 30.884083] ReiserFS: sda3: using ordered data mode [ 30.893590] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 30.894500] ReiserFS: sda3: checking transaction log (sda3) [ 30.937895] ReiserFS: sda3: Using r5 hash to sort names [ 30.937946] VFS: Mounted root (reiserfs filesystem) readonly. [ 30.937996] Freeing unused kernel memory: 176k freed [ 31.240623] Clocksource tsc unstable (delta = -101952042 ns) [ 32.785186] ReiserFS: sda3: switching to journaled data mode [ 33.851423] r8169 Gigabit Ethernet driver 2.2LK loaded [ 33.851628] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 33.851633] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 33.851642] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 33.851789] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314 [ 33.855223] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 33.855229] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 33.855374] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 33.855377] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 33.855458] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 33.855480] ehci_hcd 0000:00:02.1: debug port 1 [ 33.855483] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 33.855489] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 33.858684] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.858754] usb usb1: configuration #1 chosen from 1 choice [ 33.858768] hub 1-0:1.0: USB hub found [ 33.858773] hub 1-0:1.0: 10 ports detected [ 33.969146] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 33.994089] reiser4: sdb2: found disk format 4.0.0. [ 34.009535] usb 1-3: configuration #1 chosen from 1 choice [ 34.009727] hub 1-3:1.0: USB hub found [ 34.010451] hub 1-3:1.0: 4 ports detected [ 34.106728] usb 1-3.1: new low speed USB device using ehci_hcd and address 3 [ 34.141157] usb 1-3.1: configuration #1 chosen from 1 choice [ 34.144754] input: Logitech USB Receiver as /class/input/input3 [ 34.153515] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 34.155582] input: Logitech USB Receiver as /class/input/input4 [ 34.160990] mice: PS/2 mouse device common for all mice [ 34.175696] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 42.876614] reiser4: sda6: found disk format 4.0.0. [ 43.324415] reiser4: sdb1: found disk format 4.0.0. [ 43.741998] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [ 45.013198] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 45.013203] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 [ 45.014300] Audigy2 value: Special config. [ 46.597359] w83627ehf: Found W83627EHG chip at 0x290 [ 47.883333] r8169: eth0: link up [ 47.883342] r8169: eth0: link up [ 48.563063] NET: Registered protocol family 17 [ 51.559910] nvidia: module license 'NVIDIA' taints kernel. [ 51.731619] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17 [ 51.731627] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 (level, low) -> IRQ 17 [ 51.731632] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 51.731723] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 171.06 Wed Feb 20 09:02:26 PST 2008