Linux version 2.6.24.02-fd13-amd64 (root@gentoo64) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 SMP Mon Feb 18 20:54:15 UTC 2008 Command line: initrd=initram.igz video=ofonly vga=0 BOOT_IMAGE=rescue64 setkmap=de BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 851888) 1 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used end_pfn_map = 1245184 DMI present. ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT 97) ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL 20051117) ACPI: FACS CFFC0000, 0040 ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT 97) ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT 97) ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT 97) ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT 97) ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD 1) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 851888) 1 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used No mptable found. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1245184 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 851888 0: 1048576 -> 1245184 On node 0 totalpages: 1048399 DMA zone: 56 pages used for memmap DMA zone: 2588 pages reserved DMA zone: 1355 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833512 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 38072 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028787 Kernel command line: initrd=initram.igz video=ofonly vga=0 BOOT_IMAGE=rescue64 setkmap=de Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) hpet clockevent registered TSC calibrated against HPET Marking TSC unstable due to TSCs unsynchronized time.c: Detected 3013.888 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ 8000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 8000000 Memory: 4036864k/4980736k available (5710k kernel code, 156184k reserved, 3445k data, 272k init) SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Calibrating delay using timer specific routine.. 6032.11 BogoMIPS (lpj=3016058) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12557875 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 6027.45 BogoMIPS (lpj=3013726) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 Brought up 2 CPUs sizeof(vma)=168 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=224 bytes sizeof(task_struct)=2176 bytes CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 khelper used greatest stack depth: 6808 bytes left net_namespace: 120 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 khelper used greatest stack depth: 6536 bytes left ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:08.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 8000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0x800-0x80f has been reserved system 00:05: ioport range 0x2000-0x207f has been reserved system 00:05: ioport range 0x2080-0x20ff has been reserved system 00:05: ioport range 0x2400-0x247f has been reserved system 00:05: ioport range 0x2480-0x24ff has been reserved system 00:05: ioport range 0x2800-0x287f has been reserved system 00:05: ioport range 0x2880-0x28ff has been reserved system 00:05: ioport range 0x2c00-0x2c7f has been reserved system 00:05: ioport range 0x2c80-0x2cff has been reserved system 00:05: iomem range 0x0-0x0 could not be reserved system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0a: ioport range 0x290-0x29f has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved PCI: Bridge: 0000:00:08.0 IO window: d000-dfff MEM window: f9f00000-f9ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: c000-cfff MEM window: f9e00000-f9efffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: e000-efff MEM window: fa000000-febfffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:08.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5461k freed audit: initializing netlink socket (disabled) audit(1205937134.550:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Loading Reiser4. See www.namesys.com for a description of Reiser4. squashfs: version 3.3 (2007/10/31) Phillip Lougher squashfs: LZMA suppport for slax.org by jro NTFS driver 2.1.29 [Flags: R/O]. fuse init (API version 7.9) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:04:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize loop: AES key scrubbing enabled loop: loaded (max 8 devices) Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.14) Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.1.18 ixgbe: Copyright (c) 1999-2007 Intel Corporation. Intel(R) PRO/10GbE Network Driver - version 1.0.126-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. Atheros(R) L2 Ethernet Driver - version 2.0.4 Copyright (c) 2007 Atheros Corporation. tehuti: Tehuti Networks(R) Network Driver, 7.29.3 tehuti: Options: hw_csum pcnet32.c:v1.34-NAPI 14.Aug.2007 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ns83820.c: National Semiconductor DP83820 10/100/1000 driver. Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:01:00.0 to 64 eth0: RTL8168b/8111b at 0xffffc20000028000, 00:19:66:47:f3:cb, XID 38000000 IRQ 1275 myri10ge: Version 1.3.2-1.287 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) input: Macintosh mouse button emulation as /class/input/input0 Loading iSCSI transport class v2.0-724. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs Adaptec aacraid driver 1.1-5[2449]-ms PCI: Unable to reserve mem region #2:1000@f9fff000 for device 0000:02:08.0 aic7xxx: at PCI 2/8/0 aic7xxx: I/O ports already in use, ignoring. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded scsi: Detection failed (no card) QLogic Fibre Channel HBA Driver iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.2.2 Copyright(c) 2004-2007 Emulex. All rights reserved. DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. RocketRAID 3xxx SATA Controller driver v1.2 (070830) stex: Promise SuperTrak EX Driver version: 3.6.0000.1 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:0a.0: version 3.0 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio PCI: Setting latency timer of device 0000:00:0a.0 to 64 scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 1274 ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 1274 ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 1274 ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 1274 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 00(40) scsi_scan_0 used greatest stack depth: 6296 bytes left ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 40(40) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2: failed to recover some devices, retrying in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:09.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:09.0 to 64 scsi5 : pata_amd scsi6 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata6: port disabled. ignoring. Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 Fusion MPT FC Host driver 3.04.06 Fusion MPT SAS Host driver 3.04.06 Fusion MPT misc device (ioctl) driver 3.04.06 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) Fusion MPT LAN driver 3.04.06 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 21, io mem 0xf9dff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usb 1-3: new high speed USB device using ehci_hcd and address 2 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected usb 1-3.1: new low speed USB device using ehci_hcd and address 3 usb 1-3.1: configuration #1 chosen from 1 choice usb 1-3.4: new high speed USB device using ehci_hcd and address 4 usb 1-3.4: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1 input: Logitech USB Receiver as /class/input/input3 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 registered taskstats version 1 Freeing unused kernel memory: 272k freed Write protecting the kernel read-only data: 2320k mount used greatest stack depth: 6112 bytes left device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 xor: automatically using best checksumming function: generic_sse generic_sse: 9264.000 MB/sec xor: using function: generic_sse (9264.000 MB/sec) async_tx: api initialized (sync-only) raid6: int64x1 2746 MB/s raid6: int64x2 3542 MB/s raid6: int64x4 3410 MB/s raid6: int64x8 2457 MB/s raid6: sse2x1 4222 MB/s raid6: sse2x2 5554 MB/s raid6: sse2x4 5664 MB/s raid6: using algorithm sse2x4 (5664 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 JFS: nTxBlock = 8192, nTxLock = 65536 RPC: Registered udp transport module. RPC: Registered tcp transport module. SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem usb-storage: device scan complete scsi 7:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.19 PQ: 0 ANSI: 0 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 7:0:0:0: Attached scsi CD-ROM sr0 sr 7:0:0:0: Attached scsi generic sg0 type 5 mount used greatest stack depth: 4408 bytes left ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A mount used greatest stack depth: 4376 bytes left input: PC Speaker as /class/input/input4 input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input6 ACPI: Power Button (CM) [PWRB] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 r8169: eth0: link up r8169: eth0: link up nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17 ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period NET: Registered protocol family 10 lo: Disabled Privacy Extensions usb 1-3.2: new high speed USB device using ehci_hcd and address 5 usb 1-3.2: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 8:0:0:0: Direct-Access Generic IC1210 CF 1.9C PQ: 0 ANSI: 0 CCS scsi 8:0:0:1: Direct-Access Generic IC1210 MS 1.9C PQ: 0 ANSI: 0 CCS scsi 8:0:0:2: Direct-Access Generic IC1210 MMC/SD 1.9C PQ: 0 ANSI: 0 CCS scsi 8:0:0:3: Direct-Access Generic IC1210 SM 1.9C PQ: 0 ANSI: 0 CCS sd 8:0:0:0: [sda] Attached SCSI removable disk sd 8:0:0:0: Attached scsi generic sg1 type 0 sd 8:0:0:1: [sdb] Attached SCSI removable disk sd 8:0:0:1: Attached scsi generic sg2 type 0 sd 8:0:0:2: [sdc] 122624 512-byte hardware sectors (63 MB) sd 8:0:0:2: [sdc] Write Protect is off sd 8:0:0:2: [sdc] Mode Sense: 4b 00 00 08 sd 8:0:0:2: [sdc] Assuming drive cache: write through sd 8:0:0:2: [sdc] 122624 512-byte hardware sectors (63 MB) sd 8:0:0:2: [sdc] Write Protect is off sd 8:0:0:2: [sdc] Mode Sense: 4b 00 00 08 sd 8:0:0:2: [sdc] Assuming drive cache: write through sdc: sdc1 sd 8:0:0:2: [sdc] Attached SCSI removable disk sd 8:0:0:2: Attached scsi generic sg3 type 0 sd 8:0:0:3: [sdd] Attached SCSI removable disk sd 8:0:0:3: Attached scsi generic sg4 type 0