| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080330224017.GE28445@cs181133002.pp.htv.fi>
Date: Mon, 31 Mar 2008 01:40:17 +0300
From: Adrian Bunk <bunk@...nel.org>
To: lethal@...ux-sh.org
Cc: linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC: 2.6 patch] sh: remove the broken SH_MPC1211 support
SH_MPC1211 has been marked as BROKEN for some time.
Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.
Signed-off-by: Adrian Bunk <bunk@...nel.org>
---
arch/sh/Kconfig | 13 -
arch/sh/Makefile | 1
arch/sh/boards/mpc1211/Makefile | 8
arch/sh/boards/mpc1211/pci.c | 295 ----------------------
arch/sh/boards/mpc1211/rtc.c | 136 ----------
arch/sh/boards/mpc1211/setup.c | 347 ---------------------------
arch/sh/tools/mach-types | 1
drivers/ide/Kconfig | 2
drivers/mtd/maps/Kconfig | 7
drivers/mtd/maps/Makefile | 1
drivers/mtd/maps/mpc1211.c | 80 ------
include/asm-sh/keyboard.h | 13 -
include/asm-sh/mpc1211/dma.h | 303 -----------------------
include/asm-sh/mpc1211/io.h | 22 -
include/asm-sh/mpc1211/keyboard.h | 60 ----
include/asm-sh/mpc1211/m1543c.h | 200 ---------------
include/asm-sh/mpc1211/mc146818rtc.h | 6
include/asm-sh/mpc1211/mpc1211.h | 18 -
include/asm-sh/mpc1211/pci.h | 40 ---
19 files changed, 3 insertions(+), 1550 deletions(-)
e9d259fed328fe9198b20d4090b2e474ab790173 diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1272048..1eeff2e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -428,14 +428,6 @@ config SH_DREAMCAST
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
-config SH_MPC1211
- bool "Interface MPC1211"
- depends on CPU_SUBTYPE_SH7751 && BROKEN
- help
- CTP/PCI-SH02 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
@@ -636,8 +628,7 @@ source "arch/sh/drivers/Kconfig"
endmenu
config ISA_DMA_API
- def_bool y
- depends on SH_MPC1211
+ bool
menu "Kernel features"
@@ -742,7 +733,7 @@ menu "Boot options"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
- default "0x00004000" if SH_MPC1211 || SH_SH03
+ default "0x00004000" if SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index cffc92b..312847a 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -109,7 +109,6 @@ machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
machdir-$(CONFIG_SH_HP6XX) += hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
-machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile
deleted file mode 100644
index 8cd31b5..0000000
--- a/arch/sh/boards/mpc1211/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
-#
-
-obj-y := setup.o rtc.o
-
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c
deleted file mode 100644
index 23849f7..0000000
--- a/arch/sh/boards/mpc1211/pci.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
- *
- * (c) 2002-2003 Saito.K & Jeanne
- *
- * Dustin McIntire (dustin@...soria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@....cz>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/mpc1211/pci.h>
-
-static struct resource mpcpci_io_resource = {
- "MPCPCI IO",
- 0x00000000,
- 0xffffffff,
- IORESOURCE_IO
-};
-
-static struct resource mpcpci_mem_resource = {
- "MPCPCI mem",
- 0x00000000,
- 0xffffffff,
- IORESOURCE_MEM
-};
-
-static struct pci_ops pci_direct_conf1;
-struct pci_channel board_pci_channels[] = {
- {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
- {NULL, NULL, NULL, 0, 0},
-};
-
-/*
- * Direct access to PCI hardware...
- */
-
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
- u32 word;
- unsigned long flags;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
-
- switch (size) {
- case 1:
- switch (where & 0x3) {
- case 3:
- *value = (u8)(word >> 24);
- break;
- case 2:
- *value = (u8)(word >> 16);
- break;
- case 1:
- *value = (u8)(word >> 8);
- break;
- default:
- *value = (u8)word;
- break;
- }
- break;
- case 2:
- switch (where & 0x3) {
- case 3:
- *value = (u16)(word >> 24);
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
- *value |= ((word & 0xff) << 8);
- break;
- case 2:
- *value = (u16)(word >> 16);
- break;
- case 1:
- *value = (u16)(word >> 8);
- break;
- default:
- *value = (u16)word;
- break;
- }
- break;
- case 4:
- *value = word;
- break;
- }
- PCIDBG(4,"pci_conf1_read@...08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */
-static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
- u32 word,mask = 0;
- unsigned long flags;
- u32 shift = (where & 3) * 8;
-
- if(size == 1) {
- mask = ((1 << 8) - 1) << shift; // create the byte mask
- } else if(size == 2){
- if(shift == 24)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- mask = ((1 << 16) - 1) << shift; // create the word mask
- }
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
- if(size == 4){
- writel(value, PCIPDR);
- local_irq_restore(flags);
- PCIDBG(4,"pci_conf1_write@...08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
- return PCIBIOS_SUCCESSFUL;
- }
- word = readl(PCIPDR);
- word &= ~mask;
- word |= ((value << shift) & mask);
- writel(word, PCIPDR);
- local_irq_restore(flags);
- PCIDBG(4,"pci_conf1_write@...08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
- return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-static struct pci_ops pci_direct_conf1 = {
- .read = pci_conf1_read,
- .write = pci_conf1_write,
-};
-
-static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
-{
- dev->resource[0].start = 0x1f0;
- dev->resource[0].end = 0x1f7;
- dev->resource[0].flags = IORESOURCE_IO;
- dev->resource[1].start = 0x3f6;
- dev->resource[1].end = 0x3f6;
- dev->resource[1].flags = IORESOURCE_IO;
- dev->resource[2].start = 0x170;
- dev->resource[2].end = 0x177;
- dev->resource[2].flags = IORESOURCE_IO;
- dev->resource[3].start = 0x376;
- dev->resource[3].end = 0x376;
- dev->resource[3].flags = IORESOURCE_IO;
- dev->resource[4].start = 0xf000;
- dev->resource[4].end = 0xf00f;
- dev->resource[4].flags = IORESOURCE_IO;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
-
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
-/*
- * Called after each bus is probed, but before its children
- * are examined.
- */
-
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
-{
- pci_read_bridge_bases(b);
-}
-
-/*
- * IRQ functions
- */
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
- return (((pin-1) + slot) % 4) + 1;
-}
-
-static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
-{
- return (((pin-1) - slot) & 3) + 1;
-}
-
-static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- unsigned long flags;
- u8 pin = *pinp;
- u32 word;
-
- for ( ; dev->bus->self; dev = dev->bus->self) {
- if (!pin)
- continue;
-
- if (dev->bus->number == 1) {
- local_irq_save(flags);
- writel(0x80000000 | 0x2c, PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
- word >>= 16;
-
- if (word == 0x0001)
- pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
- else
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- } else
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- }
-
- *pinp = pin;
-
- return PCI_SLOT(dev->devfn);
-}
-
-static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
- if (dev->bus->number == 0) {
- switch (slot) {
- case 13: irq = 9; break; /* USB */
- case 22: irq = 10; break; /* LAN */
- default: irq = 0; break;
- }
- } else {
- switch (pin) {
- case 0: irq = 0; break;
- case 1: irq = 7; break;
- case 2: irq = 9; break;
- case 3: irq = 10; break;
- case 4: irq = 11; break;
- }
- }
-
- if( irq < 0 ) {
- PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
- return irq;
- }
-
- PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
- return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
- pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
-}
-
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- if (start >= 0x10000UL) {
- if ((start & 0xffffUL) < 0x4000UL) {
- start = (start & 0xffff0000UL) + 0x4000UL;
- } else if ((start & 0xffffUL) >= 0xf000UL) {
- start = (start & 0xffff0000UL) + 0x10000UL;
- }
- res->start = start;
- } else {
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
- }
-}
-
diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c
deleted file mode 100644
index 03b123a..0000000
--- a/arch/sh/boards/mpc1211/rtc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support
- *
- * Copyright (C) 2002 Saito.K & Jeanne
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-unsigned long get_cmos_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- spin_lock(&rtc_lock);
-
- do {
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
-
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- }
-
- spin_unlock(&rtc_lock);
-
- year += 1900;
- if (year < 1970)
- year += 100;
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-void mpc1211_rtc_gettimeofday(struct timeval *tv)
-{
-
- tv->tv_sec = get_cmos_time();
- tv->tv_usec = 0;
-}
-
-/* arc/i386/kernel/time.c */
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char save_control, save_freq_select;
-
- /* gets recalled with irq locally disabled */
- spin_lock(&rtc_lock);
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- }
- CMOS_WRITE(real_seconds,RTC_SECONDS);
- CMOS_WRITE(real_minutes,RTC_MINUTES);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- spin_unlock(&rtc_lock);
-
- return retval;
-}
-
-int mpc1211_rtc_settimeofday(const struct timeval *tv)
-{
- unsigned long nowtime = tv->tv_sec;
-
- return set_rtc_mmss(nowtime);
-}
-
-void mpc1211_time_init(void)
-{
- rtc_sh_get_time = mpc1211_rtc_gettimeofday;
- rtc_sh_set_time = mpc1211_rtc_settimeofday;
-}
-
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
deleted file mode 100644
index fede363..0000000
--- a/arch/sh/boards/mpc1211/setup.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * linux/arch/sh/boards/mpc1211/setup.c
- *
- * Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mpc1211/mpc1211.h>
-#include <asm/mpc1211/pci.h>
-#include <asm/mpc1211/m1543c.h>
-
-/* ALI15X3 SMBus address offsets */
-#define SMBHSTSTS (0 + 0x3100)
-#define SMBHSTCNT (1 + 0x3100)
-#define SMBHSTSTART (2 + 0x3100)
-#define SMBHSTCMD (7 + 0x3100)
-#define SMBHSTADD (3 + 0x3100)
-#define SMBHSTDAT0 (4 + 0x3100)
-#define SMBHSTDAT1 (5 + 0x3100)
-#define SMBBLKDAT (6 + 0x3100)
-
-/* Other settings */
-#define MAX_TIMEOUT 500 /* times 1/100 sec */
-
-/* ALI15X3 command constants */
-#define ALI15X3_ABORT 0x04
-#define ALI15X3_T_OUT 0x08
-#define ALI15X3_QUICK 0x00
-#define ALI15X3_BYTE 0x10
-#define ALI15X3_BYTE_DATA 0x20
-#define ALI15X3_WORD_DATA 0x30
-#define ALI15X3_BLOCK_DATA 0x40
-#define ALI15X3_BLOCK_CLR 0x80
-
-/* ALI15X3 status register bits */
-#define ALI15X3_STS_IDLE 0x04
-#define ALI15X3_STS_BUSY 0x08
-#define ALI15X3_STS_DONE 0x10
-#define ALI15X3_STS_DEV 0x20 /* device error */
-#define ALI15X3_STS_COLL 0x40 /* collision or no response */
-#define ALI15X3_STS_TERM 0x80 /* terminated by abort */
-#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */
-
-static void __init pci_write_config(unsigned long busNo,
- unsigned long devNo,
- unsigned long fncNo,
- unsigned long cnfAdd,
- unsigned long cnfData)
-{
- ctrl_outl((0x80000000
- + ((busNo & 0xff) << 16)
- + ((devNo & 0x1f) << 11)
- + ((fncNo & 0x07) << 8)
- + (cnfAdd & 0xfc)), PCIPAR);
-
- ctrl_outl(cnfData, PCIPDR);
-}
-
-/*
- Initialize IRQ setting
-*/
-
-static unsigned char m_irq_mask = 0xfb;
-static unsigned char s_irq_mask = 0xff;
-
-static void disable_mpc1211_irq(unsigned int irq)
-{
- if( irq < 8) {
- m_irq_mask |= (1 << irq);
- outb(m_irq_mask,I8259_M_MR);
- } else {
- s_irq_mask |= (1 << (irq - 8));
- outb(s_irq_mask,I8259_S_MR);
- }
-
-}
-
-static void enable_mpc1211_irq(unsigned int irq)
-{
- if( irq < 8) {
- m_irq_mask &= ~(1 << irq);
- outb(m_irq_mask,I8259_M_MR);
- } else {
- s_irq_mask &= ~(1 << (irq - 8));
- outb(s_irq_mask,I8259_S_MR);
- }
-}
-
-static inline int mpc1211_irq_real(unsigned int irq)
-{
- int value;
- int irqmask;
-
- if ( irq < 8) {
- irqmask = 1<<irq;
- outb(0x0b,I8259_M_CR); /* ISR register */
- value = inb(I8259_M_CR) & irqmask;
- outb(0x0a,I8259_M_CR); /* back ro the IPR reg */
- return value;
- }
- irqmask = 1<<(irq - 8);
- outb(0x0b,I8259_S_CR); /* ISR register */
- value = inb(I8259_S_CR) & irqmask;
- outb(0x0a,I8259_S_CR); /* back ro the IPR reg */
- return value;
-}
-
-static void mask_and_ack_mpc1211(unsigned int irq)
-{
- if(irq < 8) {
- if(m_irq_mask & (1<<irq)){
- if(!mpc1211_irq_real(irq)){
- atomic_inc(&irq_err_count)
- printk("spurious 8259A interrupt: IRQ %x\n",irq);
- }
- } else {
- m_irq_mask |= (1<<irq);
- }
- inb(I8259_M_MR); /* DUMMY */
- outb(m_irq_mask,I8259_M_MR); /* disable */
- outb(0x60+irq,I8259_M_CR); /* EOI */
-
- } else {
- if(s_irq_mask & (1<<(irq - 8))){
- if(!mpc1211_irq_real(irq)){
- atomic_inc(&irq_err_count);
- printk("spurious 8259A interrupt: IRQ %x\n",irq);
- }
- } else {
- s_irq_mask |= (1<<(irq - 8));
- }
- inb(I8259_S_MR); /* DUMMY */
- outb(s_irq_mask,I8259_S_MR); /* disable */
- outb(0x60+(irq-8),I8259_S_CR); /* EOI */
- outb(0x60+2,I8259_M_CR);
- }
-}
-
-static void end_mpc1211_irq(unsigned int irq)
-{
- enable_mpc1211_irq(irq);
-}
-
-static unsigned int startup_mpc1211_irq(unsigned int irq)
-{
- enable_mpc1211_irq(irq);
- return 0;
-}
-
-static void shutdown_mpc1211_irq(unsigned int irq)
-{
- disable_mpc1211_irq(irq);
-}
-
-static struct hw_interrupt_type mpc1211_irq_type = {
- .typename = "MPC1211-IRQ",
- .startup = startup_mpc1211_irq,
- .shutdown = shutdown_mpc1211_irq,
- .enable = enable_mpc1211_irq,
- .disable = disable_mpc1211_irq,
- .ack = mask_and_ack_mpc1211,
- .end = end_mpc1211_irq
-};
-
-static void make_mpc1211_irq(unsigned int irq)
-{
- irq_desc[irq].chip = &mpc1211_irq_type;
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = 0;
- irq_desc[irq].depth = 1;
- disable_mpc1211_irq(irq);
-}
-
-int mpc1211_irq_demux(int irq)
-{
- unsigned int poll;
-
- if( irq == 2 ) {
- outb(0x0c,I8259_M_CR);
- poll = inb(I8259_M_CR);
- if(poll & 0x80) {
- irq = (poll & 0x07);
- }
- if( irq == 2) {
- outb(0x0c,I8259_S_CR);
- poll = inb(I8259_S_CR);
- irq = (poll & 0x07) + 8;
- }
- }
- return irq;
-}
-
-static void __init init_mpc1211_IRQ(void)
-{
- int i;
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 1
- * 4: serial 0
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 10: lan
- * 12: mouse
- * 14: ide0
- * 15: ide1
- */
-
- pci_write_config(0,0,0,0x54, 0xb0b0002d);
- outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */
- outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */
- outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */
- outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */
- outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */
- outb(0x02, I8259_S_MR); /* s icw3 slave id */
- outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/
- outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/
- outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */
- outb(0xff, I8259_S_MR); /* disable irq8--irq15 */
-
- for ( i=0; i < 16; i++) {
- if(i != 2) {
- make_mpc1211_irq(i);
- }
- }
-}
-
-static void delay1000(void)
-{
- int i;
-
- for (i=0; i<1000; i++)
- ctrl_delay();
-}
-
-static int put_smb_blk(unsigned char *p, int address, int command, int no)
-{
- int temp;
- int timeout;
- int i;
-
- outb(0xff, SMBHSTSTS);
- temp = inb(SMBHSTSTS);
- for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) {
- delay1000();
- temp = inb(SMBHSTSTS);
- }
- if (timeout >= MAX_TIMEOUT){
- return -1;
- }
-
- outb(((address & 0x7f) << 1), SMBHSTADD);
- outb(0xc0, SMBHSTCNT);
- outb(command & 0xff, SMBHSTCMD);
- outb(no & 0x1f, SMBHSTDAT0);
-
- for(i = 1; i <= no; i++) {
- outb(*p++, SMBBLKDAT);
- }
- outb(0xff, SMBHSTSTART);
-
- temp = inb(SMBHSTSTS);
- for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) {
- delay1000();
- temp = inb(SMBHSTSTS);
- }
- if (timeout >= MAX_TIMEOUT) {
- return -2;
- }
- if ( temp & ALI15X3_STS_ERR ){
- return -3;
- }
- return 0;
-}
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xa2000000,
- .end = 0xa2000000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *mpc1211_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init mpc1211_devices_setup(void)
-{
- return platform_add_devices(mpc1211_devices,
- ARRAY_SIZE(mpc1211_devices));
-}
-__initcall(mpc1211_devices_setup);
-
-/* arch/sh/boards/mpc1211/rtc.c */
-void mpc1211_time_init(void);
-
-static void __init mpc1211_setup(char **cmdline_p)
-{
- unsigned char spd_buf[128];
-
- __set_io_port_base(PA_PCI_IO);
-
- pci_write_config(0,0,0,0x54, 0xb0b00000);
-
- do {
- outb(ALI15X3_ABORT, SMBHSTCNT);
- spd_buf[0] = 0x0c;
- spd_buf[1] = 0x43;
- spd_buf[2] = 0x7f;
- spd_buf[3] = 0x03;
- spd_buf[4] = 0x00;
- spd_buf[5] = 0x03;
- spd_buf[6] = 0x00;
- } while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0);
-
- board_time_init = mpc1211_time_init;
-
- return 0;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_mpc1211 __initmv = {
- .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
- .mv_setup = mpc1211_setup,
- .mv_nr_irqs = 48,
- .mv_irq_demux = mpc1211_irq_demux,
- .mv_init_irq = init_mpc1211_IRQ,
-};
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index d63b93d..d473274 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -27,7 +27,6 @@ HD64465 HD64465
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
-MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index eed6d8e..833a0c6 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -124,7 +124,7 @@ config BLK_DEV_IDE_SATA
config BLK_DEV_HD_IDE
bool "Use old disk-only driver on primary interface"
- depends on (X86 || SH_MPC1211)
+ depends on X86
---help---
There are two drivers for MFM/RLL/IDE disks. Most people use just
the new enhanced driver by itself. This option however installs the
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 12c2536..95f3478 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -477,13 +477,6 @@ config MTD_H720X
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
-config MTD_MPC1211
- tristate "CFI Flash device mapped on Interface MPC-1211"
- depends on SH_MPC1211 && MTD_CFI
- help
- This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
- If you have such a board, say 'Y'.
-
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index a9cbe80..957fb5f 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,7 +58,6 @@ obj-$(CONFIG_MTD_WALNUT) += walnut.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o
-obj-$(CONFIG_MTD_MPC1211) += mpc1211.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/mpc1211.c b/drivers/mtd/maps/mpc1211.c
deleted file mode 100644
index 45a00fa..0000000
--- a/drivers/mtd/maps/mpc1211.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Flash on MPC-1211
- *
- * $Id: mpc1211.c,v 1.4 2004/09/16 23:27:13 gleixner Exp $
- *
- * (C) 2002 Interface, Saito.K & Jeanne
- *
- * GPL'd
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-static struct mtd_info *flash_mtd;
-static struct mtd_partition *parsed_parts;
-
-struct map_info mpc1211_flash_map = {
- .name = "MPC-1211 FLASH",
- .size = 0x80000,
- .bankwidth = 1,
-};
-
-static struct mtd_partition mpc1211_partitions[] = {
- {
- .name = "IPL & ETH-BOOT",
- .offset = 0x00000000,
- .size = 0x10000,
- },
- {
- .name = "Flash FS",
- .offset = 0x00010000,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static int __init init_mpc1211_maps(void)
-{
- int nr_parts;
-
- mpc1211_flash_map.phys = 0;
- mpc1211_flash_map.virt = (void __iomem *)P2SEGADDR(0);
-
- simple_map_init(&mpc1211_flash_map);
-
- printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
- flash_mtd = do_map_probe("jedec_probe", &mpc1211_flash_map);
- if (!flash_mtd) {
- printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
- return -ENXIO;
- }
- printk(KERN_NOTICE "MPC-1211: Flash at 0x%08lx\n", mpc1211_flash_map.virt & 0x1fffffff);
- flash_mtd->module = THIS_MODULE;
-
- parsed_parts = mpc1211_partitions;
- nr_parts = ARRAY_SIZE(mpc1211_partitions);
-
- add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
- return 0;
-}
-
-static void __exit cleanup_mpc1211_maps(void)
-{
- if (parsed_parts)
- del_mtd_partitions(flash_mtd);
- else
- del_mtd_device(flash_mtd);
- map_destroy(flash_mtd);
-}
-
-module_init(init_mpc1211_maps);
-module_exit(cleanup_mpc1211_maps);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Saito.K & Jeanne <ksaito@...erface.co.jp>");
-MODULE_DESCRIPTION("MTD map driver for MPC-1211 boards. Interface");
diff --git a/include/asm-sh/keyboard.h b/include/asm-sh/keyboard.h
deleted file mode 100644
index 31dcc4f..0000000
--- a/include/asm-sh/keyboard.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_SH_KEYBOARD_H
-#define __ASM_SH_KEYBOARD_H
-/*
- * $Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
- */
-
-#include <linux/kd.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_SH_MPC1211
-#include <asm/mpc1211/keyboard-mpc1211.h>
-#endif
-#endif
diff --git a/include/asm-sh/mpc1211/dma.h b/include/asm-sh/mpc1211/dma.h
deleted file mode 100644
index e506d1a..0000000
--- a/include/asm-sh/mpc1211/dma.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_MPC1211_DMA_H
-#define _ASM_MPC1211_DMA_H
-
-#include <linux/spinlock.h> /* And spinlocks */
-#include <asm/io.h> /* need byte IO */
-#include <linux/delay.h>
-
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb outb_p
-#else
-#define dma_outb outb
-#endif
-
-#define dma_inb inb
-
-/*
- * NOTES about DMA transfers:
- *
- * controller 1: channels 0-3, byte operations, ports 00-1F
- * controller 2: channels 4-7, word operations, ports C0-DF
- *
- * - ALL registers are 8 bits only, regardless of transfer size
- * - channel 4 is not used - cascades 1 into 2.
- * - channels 0-3 are byte - addresses/counts are for physical bytes
- * - channels 5-7 are word - addresses/counts are for physical words
- * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- * - transfer count loaded to registers is 1 less than actual count
- * - controller 2 offsets are all even (2x offsets for controller 1)
- * - page registers for 5-7 don't use data bit 0, represent 128K pages
- * - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- * Address mapping for channels 0-3:
- *
- * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * P7 ... P0 A7 ... A0 A7 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Address mapping for channels 5-7:
- *
- * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
- * | ... | \ \ ... \ \ \ ... \ \
- * | ... | \ \ ... \ \ \ ... \ (not used)
- * | ... | \ \ ... \ \ \ ... \
- * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS 8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG 0x08 /* command register (w) */
-#define DMA1_STAT_REG 0x08 /* status register (r) */
-#define DMA1_REQ_REG 0x09 /* request register (w) */
-#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
-#define DMA1_MODE_REG 0x0B /* mode register (w) */
-#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
-#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
-#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
-
-#define DMA2_CMD_REG 0xD0 /* command register (w) */
-#define DMA2_STAT_REG 0xD0 /* status register (r) */
-#define DMA2_REQ_REG 0xD2 /* request register (w) */
-#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
-#define DMA2_MODE_REG 0xD6 /* mode register (w) */
-#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
-#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
-#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
-
-#define DMA_ADDR_0 0x00 /* DMA address registers */
-#define DMA_ADDR_1 0x02
-#define DMA_ADDR_2 0x04
-#define DMA_ADDR_3 0x06
-#define DMA_ADDR_4 0xC0
-#define DMA_ADDR_5 0xC4
-#define DMA_ADDR_6 0xC8
-#define DMA_ADDR_7 0xCC
-
-#define DMA_CNT_0 0x01 /* DMA count registers */
-#define DMA_CNT_1 0x03
-#define DMA_CNT_2 0x05
-#define DMA_CNT_3 0x07
-#define DMA_CNT_4 0xC2
-#define DMA_CNT_5 0xC6
-#define DMA_CNT_6 0xCA
-#define DMA_CNT_7 0xCE
-
-#define DMA_PAGE_0 0x87 /* DMA page registers */
-#define DMA_PAGE_1 0x83
-#define DMA_PAGE_2 0x81
-#define DMA_PAGE_3 0x82
-#define DMA_PAGE_5 0x8B
-#define DMA_PAGE_6 0x89
-#define DMA_PAGE_7 0x8A
-
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr, DMA1_MASK_REG);
- else
- dma_outb(dmanr & 3, DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr | 4, DMA1_MASK_REG);
- else
- dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(0, DMA1_CLEAR_FF_REG);
- else
- dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
- if (dmanr<=3)
- dma_outb(mode | dmanr, DMA1_MODE_REG);
- else
- dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
-{
- switch(dmanr) {
- case 0:
- dma_outb( pagenr & 0xff, DMA_PAGE_0);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400);
- break;
- case 1:
- dma_outb( pagenr & 0xff, DMA_PAGE_1);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400);
- break;
- case 2:
- dma_outb( pagenr & 0xff, DMA_PAGE_2);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400);
- break;
- case 3:
- dma_outb( pagenr & 0xff, DMA_PAGE_3);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400);
- break;
- case 5:
- dma_outb( pagenr & 0xfe, DMA_PAGE_5);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400);
- break;
- case 6:
- dma_outb( pagenr & 0xfe, DMA_PAGE_6);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400);
- break;
- case 7:
- dma_outb( pagenr & 0xfe, DMA_PAGE_7);
- dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400);
- break;
- }
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- set_dma_page(dmanr, a>>16);
- if (dmanr <= 3) {
- dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- } else {
- dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- }
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--;
- if (dmanr <= 3) {
- dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- } else {
- dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
- : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
- /* using short to get 16-bit wrap around */
- unsigned short count;
-
- count = 1 + dma_inb(io_port);
- count += dma_inb(io_port) << 8;
- return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* _ASM_MPC1211_DMA_H */
diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h
deleted file mode 100644
index 6298370..0000000
--- a/include/asm-sh/mpc1211/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-sh/mpc1211/io.h
- *
- * Copyright 2001 Saito.K & Jeanne
- *
- * IO functions for an Interface MPC-1211
- */
-
-#ifndef _ASM_SH_IO_MPC1211_H
-#define _ASM_SH_IO_MPC1211_H
-
-#include <linux/time.h>
-
-extern int mpc1211_irq_demux(int irq);
-
-extern void init_mpc1211_IRQ(void);
-extern void heartbeat_mpc1211(void);
-
-extern void mpc1211_rtc_gettimeofday(struct timeval *tv);
-extern int mpc1211_rtc_settimeofday(const struct timeval *tv);
-
-#endif /* _ASM_SH_IO_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h
deleted file mode 100644
index 9020fee..0000000
--- a/include/asm-sh/mpc1211/keyboard.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * MPC1211 specific keybord definitions
- * Taken from the old asm-i386/keybord.h for PC/AT-style definitions
- * created 3 Nov 1996 by Geert Uytterhoeven.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/kd.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-
-#define KEYBOARD_IRQ 1
-#define DISABLE_KBD_DURING_INTERRUPTS 0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
- char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
-extern pm_callback pm_kbd_request_override;
-
-#define kbd_setkeycode pckbd_setkeycode
-#define kbd_getkeycode pckbd_getkeycode
-#define kbd_translate pckbd_translate
-#define kbd_unexpected_up pckbd_unexpected_up
-#define kbd_leds pckbd_leds
-#define kbd_init_hw pckbd_init_hw
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
- "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform. */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations. */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#define AUX_IRQ 12
-
-#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h
deleted file mode 100644
index c95d132..0000000
--- a/include/asm-sh/mpc1211/m1543c.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __ASM_SH_M1543C_H
-#define __ASM_SH_M1543C_H
-
-/*
- * linux/include/asm-sh/m1543c.h
- * Copyright (C) 2001 Nobuhiro Sakawa
- * M1543C:PCI-ISA Bus Bridge with Super IO Chip support
- *
- * from
- *
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE 0x3f0
-#define IDE1_PRIMARY_BASE 0x1f0
-#define IDE1_SECONDARY_BASE 0x170
-#define PARPORT_PRIMARY_BASE 0x378
-#define COM1_PRIMARY_BASE 0x2f8
-#define COM2_PRIMARY_BASE 0x3f8
-#define COM3_PRIMARY_BASE 0x3e8
-#define RTC_PRIMARY_BASE 0x070
-#define KBC_PRIMARY_BASE 0x060
-#define AUXIO_PRIMARY_BASE 0x000 /* XXX */
-#define I8259_M_CR 0x20
-#define I8259_M_MR 0x21
-#define I8259_S_CR 0xa0
-#define I8259_S_MR 0xa1
-
-/* Logical device number */
-#define LDN_FDC 0
-#define LDN_IDE1 1
-#define LDN_IDE2 2
-#define LDN_PARPORT 3
-#define LDN_COM1 4
-#define LDN_COM2 5
-#define LDN_COM3 11
-#define LDN_RTC 6
-#define LDN_KBC 7
-
-/* Configuration port and key */
-#define CONFIG_PORT 0x3f0
-#define INDEX_PORT CONFIG_PORT
-#define DATA_PORT 0x3f1
-#define CONFIG_ENTER1 0x51
-#define CONFIG_ENTER2 0x23
-#define CONFIG_EXIT 0xbb
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX 0x07
-#define POWER_CONTROL_INDEX 0x22
-#define ACTIVATE_INDEX 0x30
-#define IO_BASE_HI_INDEX 0x60
-#define IO_BASE_LO_INDEX 0x61
-#define IRQ_SELECT_INDEX 0x70
-#define PS2_IRQ_INDEX 0x72
-#define DMA_SELECT_INDEX 0x74
-
-/* UART stuff. Only for debugging. */
-/* UART Register */
-
-#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */
-#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */
-#define UART_IER 0x2 /* Interrupt Enable Register */
-#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */
-#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */
-#define UART_LCR 0x6 /* Line Control Register */
-#define UART_MCR 0x8 /* MODEM Control Register */
-#define UART_LSR 0xa /* Line Status Register */
-#define UART_MSR 0xc /* MODEM Status Register */
-#define UART_SCR 0xe /* Scratch Register */
-#define UART_DLL 0x0 /* Divisor Latch (LS) */
-#define UART_DLM 0x2 /* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
- volatile __u16 rbr;
- volatile __u16 ier;
- volatile __u16 iir;
- volatile __u16 lcr;
- volatile __u16 mcr;
- volatile __u16 lsr;
- volatile __u16 msr;
- volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr rbr
-#define tcr iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll rbr
-#define dlm ier
-#define fcr iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */
-#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */
-#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP 0x0100 /* "0" if Interrupt Pending */
-#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */
-#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */
-#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */
-#define IIR_FIFO 0xc000 /* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN 0x0100 /* FIFO enable */
-#define FCR_RFRES 0x0200 /* Receiver FIFO reset */
-#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */
-#define FCR_DMA 0x0800 /* DMA mode select */
-#define FCR_RTL 0x4000 /* Receiver triger (LSB) */
-#define FCR_RTM 0x8000 /* Receiver triger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */
-#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */
-#define LCR_STB 0x0400 /* Number of Stop Bits */
-#define LCR_PEN 0x0800 /* Parity Enable */
-#define LCR_EPS 0x1000 /* Even Parity Select */
-#define LCR_SP 0x2000 /* Stick Parity */
-#define LCR_SB 0x4000 /* Set Break */
-#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR 0x0100 /* Data Terminal Ready */
-#define MCR_RTS 0x0200 /* Request to Send */
-#define MCR_OUT1 0x0400 /* Out 1 */
-#define MCR_IRQEN 0x0800 /* IRQ Enable */
-#define MCR_LOOP 0x1000 /* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR 0x0100 /* Data Ready */
-#define LSR_OE 0x0200 /* Overrun Error */
-#define LSR_PE 0x0400 /* Parity Error */
-#define LSR_FE 0x0800 /* Framing Error */
-#define LSR_BI 0x1000 /* Break Interrupt */
-#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */
-#define LSR_TEMT 0x4000 /* Transmitter Empty */
-#define LSR_FIFOE 0x8000 /* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS 0x0100 /* Delta Clear to Send */
-#define MSR_DDSR 0x0200 /* Delta Data Set Ready */
-#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */
-#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */
-#define MSR_CTS 0x1000 /* Clear to Send */
-#define MSR_DSR 0x2000 /* Data Set Ready */
-#define MSR_RI 0x4000 /* Ring Indicator */
-#define MSR_DCD 0x8000 /* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK (1843200) /* 1.8432 MHz */
-#define UART_BAUD(x) (UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS 0
-#define RTC_SECONDS_ALARM 1
-#define RTC_MINUTES 2
-#define RTC_MINUTES_ALARM 3
-#define RTC_HOURS 4
-#define RTC_HOURS_ALARM 5
-#define RTC_DAY_OF_WEEK 6
-#define RTC_DAY_OF_MONTH 7
-#define RTC_MONTH 8
-#define RTC_YEAR 9
-#define RTC_FREQ_SELECT 10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only. */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL 11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif /* __ASM_SH_M1543C_H */
diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h
deleted file mode 100644
index e245f2a..0000000
--- a/include/asm-sh/mpc1211/mc146818rtc.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * MPC1211 uses PC/AT style RTC definitions.
- */
-#include <asm-x86/mc146818rtc_32.h>
-
-
diff --git a/include/asm-sh/mpc1211/mpc1211.h b/include/asm-sh/mpc1211/mpc1211.h
deleted file mode 100644
index fa456c3..0000000
--- a/include/asm-sh/mpc1211/mpc1211.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_SH_MPC1211_H
-#define __ASM_SH_MPC1211_H
-
-/*
- * linux/include/asm-sh/mpc1211.h
- *
- * Copyright (C) 2001 Saito.K & Jeanne
- *
- * Interface MPC-1211 support
- */
-
-#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
-#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
-
-#define PCIPAR (0xa4000cf8) /* PCI Config address */
-#define PCIPDR (0xa4000cfc) /* PCI Config data */
-
-#endif /* __ASM_SH_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h
deleted file mode 100644
index 5d3712c..0000000
--- a/include/asm-sh/mpc1211/pci.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Low-Level PCI Support for MPC-1211
- *
- * (c) 2002 Saito.K & Jeanne
- *
- */
-
-#ifndef _PCI_MPC1211_H_
-#define _PCI_MPC1211_H_
-
-#include <linux/pci.h>
-
-/* set debug level 4=verbose...1=terse */
-//#define DEBUG_PCI 3
-#undef DEBUG_PCI
-
-#ifdef DEBUG_PCI
-#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
-#else
-#define PCIDBG(n, x...)
-#endif
-
-/* startup values */
-#define PCI_PROBE_BIOS 1
-#define PCI_PROBE_CONF1 2
-#define PCI_PROBE_CONF2 4
-#define PCI_NO_SORT 0x100
-#define PCI_BIOS_SORT 0x200
-#define PCI_NO_CHECKS 0x400
-#define PCI_ASSIGN_ROMS 0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-
-/* MPC-1211 Specific Values */
-#define PCIPAR (0xa4000cf8) /* PCI Config address */
-#define PCIPDR (0xa4000cfc) /* PCI Config data */
-
-#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
-#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
-
-#endif /* _PCI_MPC1211_H_ */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists