0000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000001] time.c: Detected 2194.499 MHz processor. [ 0.000022] Console: colour dummy device 80x25 [ 0.000025] console [tty0] enabled [ 0.000047] Checking aperture... [ 0.000059] Calgary: detecting Calgary via BIOS EBDA area [ 0.000060] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 2046156k/2087424k available (2205k kernel code, 40880k reserved, 1027k data, 372k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.080007] Calibrating delay using timer specific routine.. 4394.05 BogoMIPS (lpj=8788102) [ 0.080051] Security Framework initialized [ 0.080056] SELinux: Disabled at boot. [ 0.080060] Capability LSM initialized [ 0.080268] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.081480] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.082099] Mount-cache hash table entries: 256 [ 0.082249] Initializing cgroup subsys ns [ 0.082253] Initializing cgroup subsys cpuacct [ 0.082273] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.082274] CPU: L2 cache: 4096K [ 0.082277] CPU 0/0 -> Node 0 [ 0.082278] CPU: Physical Processor ID: 0 [ 0.082279] CPU: Processor Core ID: 0 [ 0.082286] CPU0: Thermal monitoring enabled (TM2) [ 0.082288] using mwait in idle threads. [ 0.083121] ACPI: Core revision 20070126 [ 0.134667] Using local APIC timer interrupts. [ 0.136009] APIC timer calibration result 12468744 [ 0.136011] Detected 12.468 MHz APIC timer. [ 0.136165] Booting processor 1/2 APIC 0x1 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4388.98 BogoMIPS (lpj=8777965) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a [ 0.224619] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.228045] Brought up 2 CPUs [ 0.228133] CPU0 attaching sched-domain: [ 0.228135] domain 0: span 00000003 [ 0.228137] groups: 00000001 00000002 [ 0.228140] domain 1: span 00000003 [ 0.228141] groups: 00000003 [ 0.228143] CPU1 attaching sched-domain: [ 0.228145] domain 0: span 00000003 [ 0.228146] groups: 00000002 00000001 [ 0.228148] domain 1: span 00000003 [ 0.228150] groups: 00000003 [ 0.228407] net_namespace: 1016 bytes [ 0.228411] Booting paravirtualized kernel on bare hardware [ 0.228588] NET: Registered protocol family 16 [ 0.228765] ACPI: bus type pci registered [ 0.232540] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.232542] PCI: Using configuration type 1 [ 0.240278] ACPI: EC: Look up EC in DSDT [ 0.262055] ACPI: SSDT 7F690C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 0.262228] ACPI: Interpreter enabled [ 0.262231] ACPI: (supports S0 S3 S4 S5) [ 0.262244] ACPI: Using IOAPIC for interrupt routing [ 0.321140] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.322090] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.322094] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.323117] PCI: Transparent bridge - 0000:00:1e.0 [ 0.323179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.323792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.323999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.324153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.324298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.342911] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.343040] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.343151] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 0.343277] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 0.343404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.343531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.343658] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.343771] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.343921] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.343947] pnp: PnP ACPI init [ 0.343953] ACPI: bus type pnp registered [ 0.363269] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.363347] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.363422] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.363495] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.363574] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.363616] 00:05: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173() [ 0.363660] pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.363735] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.363811] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.363928] 00:08: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173() [ 0.363971] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.372994] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.381375] 00:0a: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173() [ 0.381418] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.385228] 00:0b: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173() [ 0.385277] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.385320] 00:0c: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173() [ 0.385367] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.408235] 00:0d: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173() [ 0.408291] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.408411] pnp: PnP ACPI: found 14 devices [ 0.408413] ACPI: ACPI bus type pnp unregistered [ 0.408565] usbcore: registered new interface driver usbfs [ 0.408614] usbcore: registered new interface driver hub [ 0.408648] usbcore: registered new device driver usb [ 0.408775] PCI: Using ACPI for IRQ routing [ 0.408777] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.424048] NET: Registered protocol family 8 [ 0.424049] NET: Registered protocol family 20 [ 0.424082] PCI-GART: No AMD northbridge found. [ 0.424089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11 [ 0.424093] hpet0: 3 64-bit timers, 14318180 Hz [ 0.425127] ACPI: RTC can wake from S4 [ 0.440044] pnp: the driver 'system' has been registered [ 0.440053] system 00:05: ioport range 0xc80-0xcaf has been reserved [ 0.440056] system 00:05: ioport range 0xcc0-0xcff could not be reserved [ 0.440057] system 00:05: driver attached [ 0.440063] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.440065] system 00:08: driver attached [ 0.440070] system 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 0.440073] system 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved [ 0.440074] system 00:0a: driver attached [ 0.440079] system 00:0b: ioport range 0x900-0x97f has been reserved [ 0.440081] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.440084] system 00:0b: ioport range 0x1000-0x1005 has been reserved [ 0.440086] system 00:0b: ioport range 0x1008-0x100f has been reserved [ 0.440087] system 00:0b: driver attached [ 0.440092] system 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 0.440094] system 00:0c: ioport range 0x1006-0x1007 has been reserved [ 0.440097] system 00:0c: ioport range 0x100a-0x1059 could not be reserved [ 0.440099] system 00:0c: ioport range 0x1060-0x107f has been reserved [ 0.440101] system 00:0c: ioport range 0x1080-0x10bf has been reserved [ 0.440103] system 00:0c: ioport range 0x10c0-0x10df has been reserved [ 0.440105] system 00:0c: ioport range 0x1010-0x102f has been reserved [ 0.440107] system 00:0c: ioport range 0x809-0x809 has been reserved [ 0.440109] system 00:0c: driver attached [ 0.440114] system 00:0d: iomem range 0x0-0x9efff could not be reserved [ 0.440116] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved [ 0.440118] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.440122] system 00:0d: iomem range 0xe0000-0xfffff has been reserved [ 0.440124] system 00:0d: iomem range 0x100000-0x7f6803ff could not be reserved [ 0.440127] system 00:0d: iomem range 0x7f680400-0x7f6fffff could not be reserved [ 0.440129] system 00:0d: iomem range 0x7f700000-0x7f7fffff could not be reserved [ 0.440131] system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved [ 0.440134] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved [ 0.440136] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.440139] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.440141] system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 0.440143] system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.440146] system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.440148] system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved [ 0.440150] system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved [ 0.440153] system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved [ 0.440155] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.440157] system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved [ 0.440160] system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved [ 0.440161] system 00:0d: driver attached [ 0.440517] PCI: Bridge: 0000:00:1c.0 [ 0.440518] IO window: disabled. [ 0.440524] MEM window: disabled. [ 0.440528] PREFETCH window: disabled. [ 0.440535] PCI: Bridge: 0000:00:1c.1 [ 0.440536] IO window: disabled. [ 0.440541] MEM window: 0xfe800000-0xfe8fffff [ 0.440545] PREFETCH window: disabled. [ 0.440552] PCI: Bridge: 0000:00:1c.5 [ 0.440553] IO window: disabled. [ 0.440559] MEM window: 0xfe700000-0xfe7fffff [ 0.440563] PREFETCH window: disabled. [ 0.440575] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 0.440577] IO window: 0x00002000-0x000020ff [ 0.440581] IO window: 0x00002400-0x000024ff [ 0.440586] PREFETCH window: 0x88000000-0x8bffffff [ 0.440591] MEM window: 0x8c000000-0x8fffffff [ 0.440596] PCI: Bridge: 0000:00:1e.0 [ 0.440599] IO window: 2000-2fff [ 0.440604] MEM window: 0xfe600000-0xfe6fffff [ 0.440608] PREFETCH window: 0x0000000088000000-0x000000008bffffff [ 0.440639] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.440645] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.440668] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.440673] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.440695] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.440700] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 0.440713] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.440729] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 0.440733] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.440761] NET: Registered protocol family 2 [ 0.476137] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.476791] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.478355] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.478885] TCP: Hash tables configured (established 262144 bind 65536) [ 0.478888] TCP reno registered [ 0.488226] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.504044] Switched to high resolution mode on CPU 0 [ 0.758664] it is [ 1.046924] Freeing initrd memory: 7523k freed [ 0.826122] audit: initializing netlink socket (disabled) [ 0.826141] type=2000 audit(1206978198.048:1): initialized [ 0.826364] Total HugeTLB memory allocated, 0 [ 0.826457] VFS: Disk quotas dquot_6.5.1 [ 0.826481] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.826563] io scheduler noop registered [ 0.826564] io scheduler anticipatory registered [ 0.826566] io scheduler deadline registered [ 0.826577] io scheduler cfq registered (default) [ 0.826587] pci 0000:00:02.0: Boot video device [ 0.826811] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.826857] assign_interrupt_mode Found MSI capability [ 0.826906] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.826940] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.826971] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.827070] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.827116] assign_interrupt_mode Found MSI capability [ 0.827160] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.827194] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.827224] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.827323] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 0.827368] assign_interrupt_mode Found MSI capability [ 0.827412] Allocate Port Service[0000:00:1c.5:pcie00] [ 0.827448] Allocate Port Service[0000:00:1c.5:pcie02] [ 0.827479] Allocate Port Service[0000:00:1c.5:pcie03] [ 0.828010] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004980000, using 6144k, total 7616k [ 0.828012] vesafb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.828014] vesafb: scrolling: redraw [ 0.828016] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.854933] Console: switching to colour frame buffer device 128x48 [ 0.879970] fb0: VESA VGA frame buffer device [ 0.881953] Real Time Clock Driver v1.12ac [ 0.882048] hpet_resources: 0xfed00000 is busy [ 0.882119] Linux agpgart interface v0.103 [ 0.882122] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.882271] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.882457] pnp: the driver 'serial' has been registered [ 0.882680] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.882714] serial 00:09: driver attached [ 0.882806] isa bounce pool size: 16 pages [ 0.883436] brd: module loaded [ 0.883492] input: Macintosh mouse button emulation as /class/input/input0 [ 0.883573] pnp: the driver 'i8042 kbd' has been registered [ 0.883582] i8042 kbd 00:02: driver attached [ 0.883609] pnp: the driver 'i8042 aux' has been registered [ 0.883618] i8042 aux 00:01: driver attached [ 0.883648] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.886866] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.886871] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.916129] mice: PS/2 mouse device common for all mice [ 0.916166] cpuidle: using governor ladder [ 0.916168] cpuidle: using governor menu [ 0.916475] TCP bic registered [ 0.916483] NET: Registered protocol family 1 [ 0.916492] NET: Registered protocol family 17 [ 0.916597] registered taskstats version 1 [ 0.916703] Freeing unused kernel memory: 372k freed [ 0.920167] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.285700] ACPI: SSDT 7F6810F6, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 1.286034] ACPI: SSDT 7F680BBB, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 1.286571] Monitor-Mwait will be used to enter C-1 state [ 1.286574] Monitor-Mwait will be used to enter C-2 state [ 1.286576] Monitor-Mwait will be used to enter C-3 state [ 1.286701] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.286739] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.286742] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.287052] ACPI: SSDT 7F68137C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 1.287278] ACPI: SSDT 7F681071, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 1.288091] Marking TSC unstable due to TSC halts in idle [ 1.063100] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.063138] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.063141] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.066103] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.067974] ACPI: Thermal Zone [THM] (55 C) [ 1.534970] ACPI: ACPI Dock Station Driver [ 1.554558] USB Universal Host Controller Interface driver v3.0 [ 1.554598] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 1.554609] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 1.554612] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.554760] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.554793] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.554898] usb usb1: configuration #1 chosen from 1 choice [ 1.554917] hub 1-0:1.0: USB hub found [ 1.554922] hub 1-0:1.0: 2 ports detected [ 1.624663] SCSI subsystem initialized [ 1.635956] libata version 3.00 loaded. [ 1.656474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.656477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656479] usb usb1: Product: UHCI Host Controller [ 1.656480] usb usb1: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 1.656482] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.656520] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 1.656530] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 1.656534] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.656579] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 1.656612] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.656705] usb usb2: configuration #1 chosen from 1 choice [ 1.656724] hub 2-0:1.0: USB hub found [ 1.656731] hub 2-0:1.0: 2 ports detected [ 1.760455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.760460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.760464] usb usb2: Product: UHCI Host Controller [ 1.760466] usb usb2: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 1.760469] usb usb2: SerialNumber: 0000:00:1a.1 [ 1.760516] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 1.760528] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.760533] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.760591] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.760619] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.760704] usb usb3: configuration #1 chosen from 1 choice [ 1.760723] hub 3-0:1.0: USB hub found [ 1.760728] hub 3-0:1.0: 2 ports detected [ 1.864045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.864050] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.864053] usb usb3: Product: UHCI Host Controller [ 1.864056] usb usb3: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 1.864059] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.864091] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 1.864101] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.864106] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.864168] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 1.864202] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.864283] usb usb4: configuration #1 chosen from 1 choice [ 1.864304] hub 4-0:1.0: USB hub found [ 1.864308] hub 4-0:1.0: 2 ports detected [ 1.895933] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 1.967695] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.967699] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.967702] usb usb4: Product: UHCI Host Controller [ 1.967705] usb usb4: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 1.967708] usb usb4: SerialNumber: 0000:00:1d.1 [ 1.967743] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 1.967754] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.967758] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.967824] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 1.967853] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.967937] usb usb5: configuration #1 chosen from 1 choice [ 1.967955] hub 5-0:1.0: USB hub found [ 1.967960] hub 5-0:1.0: 2 ports detected [ 1.995578] Clocksource tsc unstable (delta = -297745226 ns) [ 2.071101] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.071105] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.071108] usb usb5: Product: UHCI Host Controller [ 2.071111] usb usb5: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 2.071114] usb usb5: SerialNumber: 0000:00:1d.2 [ 1.845553] tg3.c:v3.88 (March 20, 2008) [ 1.845582] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 1.845592] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 2.076029] usb 1-2: configuration #1 chosen from 1 choice [ 2.079623] usb 1-2: New USB device found, idVendor=413c, idProduct=8140 [ 2.079626] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.866102] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:d6:63:72 [ 1.866105] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 1.866107] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.866943] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19 [ 1.867015] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 1.867024] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 1.867027] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.867077] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 1.870975] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.870982] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 1.870987] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 2.107141] Uniform Multi-Platform E-IDE driver [ 2.107144] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.890334] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.890439] usb usb6: configuration #1 chosen from 1 choice [ 1.890460] hub 6-0:1.0: USB hub found [ 1.890466] hub 6-0:1.0: 4 ports detected [ 1.937266] firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10 [ 1.992418] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.992423] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.992427] usb usb6: Product: EHCI Host Controller [ 1.992429] usb usb6: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd [ 1.992432] usb usb6: SerialNumber: 0000:00:1a.7 [ 1.992494] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 1.992509] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.992512] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.992559] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 1.999690] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.999696] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 1.999702] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 2.318693] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 2.107797] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.107941] usb usb7: configuration #1 chosen from 1 choice [ 2.107979] hub 7-0:1.0: USB hub found [ 2.107987] hub 7-0:1.0: 6 ports detected [ 2.210448] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.210453] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.210456] usb usb7: Product: EHCI Host Controller [ 2.210459] usb usb7: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd [ 2.210462] usb usb7: SerialNumber: 0000:00:1d.7 [ 2.434060] ahci 0000:00:1f.2: version 3.0 [ 2.434060] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 2.293455] usb 1-2: USB disconnect, address 2 [ 2.655810] firewire_core: created device fw0: GUID 384fc0003b237850, S400 [ 3.428972] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 3.428977] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 3.428985] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.429259] scsi0 : ahci [ 3.429348] scsi1 : ahci [ 3.429506] scsi2 : ahci [ 3.429757] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 1276 [ 3.429759] ata2: DUMMY [ 3.429761] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 1276 [ 3.379275] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 3.776981] usb 1-2: configuration #1 chosen from 1 choice [ 3.780532] usb 1-2: New USB device found, idVendor=413c, idProduct=8140 [ 3.780534] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.692953] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.693897] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC74P, max UDMA/100 [ 3.693901] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 3.903744] ata1.00: configured for UDMA/100 [ 4.017233] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 4.165472] usb 5-1: configuration #1 chosen from 1 choice [ 4.167866] hub 5-1:1.0: USB hub found [ 4.169814] hub 5-1:1.0: 4 ports detected [ 4.006623] ata3: SATA link down (SStatus 0 SControl 300) [ 4.212439] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 [ 4.212440] ICH8M: IDE controller (0x8086:0x2850 rev 0x02) at PCI slot 0000:00:1f.1 [ 4.212440] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.212440] ICH8M: not 100% native mode: will probe irqs later [ 4.212440] ICH8M: IDE port disabled [ 4.212440] ide0: BM-DMA at 0x6fa0-0x6fa7, BIOS settings: hda:DMA, hdb:PIO [ 4.212440] Probing IDE interface ide0... [ 4.221329] Driver 'sd' needs updating - please use bus_type methods [ 4.225666] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 4.225689] sd 0:0:0:0: [sda] Write Protect is off [ 4.225693] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.225727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.225807] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 4.225819] sd 0:0:0:0: [sda] Write Protect is off [ 4.225821] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.225841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.225844] sda:<6>usb 5-1: New USB device found, idVendor=0b97, idProduct=7761 [ 4.276613] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.515768] usb 5-2: new full speed USB device using uhci_hcd and address 4 [ 4.640443] sda1 sda2 < sda5 > [ 4.440493] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.481112] usb 5-2: configuration #1 chosen from 1 choice [ 4.484051] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 4.484053] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.484055] usb 5-2: Product: Biometric Coprocessor [ 4.484057] usb 5-2: Manufacturer: STMicroelectronics [ 4.690077] usb 5-1.2: new full speed USB device using uhci_hcd and address 5 [ 4.805479] usb 5-1.2: configuration #1 chosen from 1 choice [ 4.806852] usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772 [ 4.806852] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.806852] usb 5-1.2: Product: O2Micro CCID SC Reader [ 4.806852] usb 5-1.2: Manufacturer: O2 [ 5.277571] hda: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive [ 5.277599] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.278679] hda: UDMA/33 mode selected [ 5.279227] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.294953] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 5.294962] Uniform CD-ROM driver Revision: 3.20 [ 5.282807] device-mapper: uevent: version 1.0.3 [ 5.283144] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 19.479478] PM: Starting manual resume from disk [ 19.342472] kjournald starting. Commit interval 5 seconds [ 19.342489] EXT3-fs: mounted filesystem with ordered data mode. [ 22.361219] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 22.302608] agpgart: Detected an Intel 965GM Chipset. [ 22.303537] agpgart: Detected 7676K stolen memory. [ 22.315734] agpgart: AGP aperture is 256M @ 0xe0000000 [ 22.504624] ACPI: WMI: Mapper loaded [ 22.530613] ACPI: AC Adapter [AC] (on-line) [ 22.778371] input: Lid Switch as /class/input/input2 [ 22.812273] ACPI: Lid Switch [LID] [ 22.812328] input: Power Button (CM) as /class/input/input3 [ 22.646073] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 22.646077] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 22.646108] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 22.646120] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay [ 22.646124] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler [ 22.646142] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added [ 22.875604] ACPI: Power Button (CM) [PBTN] [ 22.875659] input: Sleep Button (CM) as /class/input/input4 [ 22.937320] ACPI: Sleep Button (CM) [SBTN] [ 22.775800] ACPI: Battery Slot [BAT0] (battery present) [ 22.775847] ACPI: Battery Slot [BAT1] (battery absent) [ 22.795661] input: Video Bus as /class/input/input5 [ 22.851422] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 22.852013] input: Video Bus as /class/input/input6 [ 22.914306] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 22.914452] input: Video Bus as /class/input/input7 [ 22.972002] Bluetooth: Core ver 2.11 [ 22.978303] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 22.987341] NET: Registered protocol family 31 [ 22.987343] Bluetooth: HCI device and connection manager initialized [ 22.987347] Bluetooth: HCI socket layer initialized [ 23.017969] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 23.018040] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 23.018077] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.202386] Bluetooth: HCI USB driver ver 2.9 [ 23.208339] usbcore: registered new interface driver hci_usb [ 23.311310] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9] [ 23.311333] Yenta O2: res at 0x94/0xD4: 00/ea [ 23.311335] Yenta O2: enabling read prefetch/write burst [ 23.439955] Yenta: ISA IRQ mask 0x04b8, PCI irq 19 [ 23.439959] Socket status: 30000006 [ 23.439961] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 23.439966] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 23.439968] pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff [ 23.439970] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 23.632922] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 23.613341] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks [ 23.613344] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 23.613467] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 23.613481] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 23.613500] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 23.676200] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 23.676667] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 23.816874] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 24.261624] input: PS/2 Mouse as /class/input/input8 [ 24.297096] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 24.297116] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 24.109311] input: AlpsPS/2 ALPS GlidePoint as /class/input/input9 [ 25.413291] EXT3 FS on dm-6, internal journal [ 25.763186] loop: module loaded [ 28.738265] kjournald starting. Commit interval 5 seconds [ 28.748592] EXT3 FS on sda1, internal journal [ 28.748592] EXT3-fs: mounted filesystem with ordered data mode. [ 28.827097] kjournald starting. Commit interval 5 seconds [ 28.829843] EXT3 FS on dm-4, internal journal [ 28.829846] EXT3-fs: mounted filesystem with ordered data mode. [ 28.874167] kjournald starting. Commit interval 5 seconds [ 28.877006] EXT3 FS on dm-5, internal journal [ 28.877010] EXT3-fs: mounted filesystem with ordered data mode. [ 28.921456] kjournald starting. Commit interval 5 seconds [ 28.924202] EXT3 FS on dm-3, internal journal [ 28.924204] EXT3-fs: mounted filesystem with ordered data mode. [ 28.954809] kjournald starting. Commit interval 5 seconds [ 28.958698] EXT3 FS on dm-2, internal journal [ 28.958704] EXT3-fs: mounted filesystem with ordered data mode. [ 28.981242] Adding 6152184k swap on /dev/mapper/Tamino-swap_1. Priority:-1 extents:1 across:6152184k [ 30.514873] fuse init (API version 7.9) [ 32.435232] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 32.435378] PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100102, writing 100106) [ 33.972769] NET: Registered protocol family 10 [ 33.973216] lo: Disabled Privacy Extensions [ 33.973588] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.974038] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.410939] wlan0: Initial auth_alg=0 [ 36.410945] wlan0: authenticate with AP 00:18:84:21:ef:2b [ 36.412647] wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0) [ 36.412650] wlan0: authenticated [ 36.412654] wlan0: associate with AP 00:18:84:21:ef:2b [ 36.283355] wlan0: RX AssocResp from 00:18:84:21:ef:2b (capab=0x431 status=0 aid=1) [ 36.283359] wlan0: associated [ 36.283407] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20 [ 36.283411] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 36.283415] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 36.283419] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 36.283791] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.378878] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20 [ 36.512003] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 36.379028] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 36.512193] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 38.070490] Bluetooth: L2CAP ver 2.9 [ 38.070494] Bluetooth: L2CAP socket layer initialized [ 37.981386] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 38.329811] Bluetooth: RFCOMM socket layer initialized [ 38.329820] Bluetooth: RFCOMM TTY layer initialized [ 38.329822] Bluetooth: RFCOMM ver 1.8 [ 43.102835] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 46.278610] pnp: the driver 'parport_pc' has been registered [ 46.278946] lp: driver loaded but no devices found [ 46.392346] ppdev: user-space parallel port driver [ 46.698214] wlan0: no IPv6 routers present [ 50.457312] [drm] Initialized drm 1.1.0 20060810 [ 50.494946] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.494953] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 50.495044] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 104.258195] CPU0 attaching NULL sched-domain. [ 104.258208] CPU1 attaching NULL sched-domain. [ 104.273951] CPU0 attaching sched-domain: [ 104.273964] domain 0: span 00000003 [ 104.273969] groups: 00000001 00000002 [ 104.273977] domain 1: span 00000003 [ 104.273981] groups: 00000003 [ 104.273987] CPU1 attaching sched-domain: [ 104.273991] domain 0: span 00000003 [ 104.273995] groups: 00000002 00000001 [ 104.274002] domain 1: span 00000003 [ 104.274005] groups: 00000003 [ 121.494863] Syncing filesystems ... done. [ 121.494915] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 121.495516] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 121.495614] PM: Shrinking memory... -done (0 pages freed) [ 121.514672] PM: Freed 0 kbytes in 0.04 seconds (0.00 MB/s) [ 121.516965] ACPI: Preparing to enter system sleep state S4 [ 121.518827] Suspending console(s) [ 121.518831] drm_sysfs_suspend [ 121.521511] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 122.128192] serial 00:09: disabled [ 122.128250] ACPI handle has no context! [ 122.201724] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 122.246086] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 122.246121] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 122.246155] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 122.246189] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 122.262067] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 122.277875] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [ 122.277918] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [ 122.277961] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [ 122.278058] Disabling non-boot CPUs ... [ 122.278072] CPU0 attaching NULL sched-domain. [ 122.278074] CPU1 attaching NULL sched-domain. [ 122.012363] CPU 1 is now offline [ 122.012366] SMP alternatives: switching to UP code [ 122.013615] CPU0 attaching sched-domain: [ 122.013618] domain 0: span 00000001 [ 122.013619] groups: 00000001 [ 122.013793] CPU1 is down [ 122.013916] Extended CMOS year: 2000 [ 122.014012] PM: Creating hibernation image: [ 122.016358] PM: Need to copy 160268 pages [ 122.016358] Extended CMOS year: 2000 [ 122.016358] Enabling non-boot CPUs ... [ 122.016358] CPU0 attaching NULL sched-domain. [ 122.024471] SMP alternatives: switching to SMP code [ 122.025385] Booting processor 1/2 APIC 0x1 [ 122.292156] Initializing CPU#1 [ 122.293794] Calibrating delay using timer specific routine.. 4386.86 BogoMIPS (lpj=8773722) [ 122.293794] CPU: L1 I cache: 32K, L1 D cache: 32K [ 122.293794] CPU: L2 cache: 4096K [ 122.293794] CPU 1/1 -> Node 0 [ 122.293794] CPU: Physical Processor ID: 0 [ 122.293794] CPU: Processor Core ID: 1 [ 122.293794] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a [ 122.116979] CPU0 attaching sched-domain: [ 122.116981] domain 0: span 00000003 [ 122.116983] groups: 00000001 00000002 [ 122.116985] domain 1: span 00000003 [ 122.116987] groups: 00000003 [ 122.116989] CPU1 attaching sched-domain: [ 122.116990] domain 0: span 00000003 [ 122.116991] groups: 00000002 00000001 [ 122.116993] domain 1: span 00000003 [ 122.116995] groups: 00000003 [ 122.293794] CPU1 is up [ 122.293800] Switched to high resolution mode on CPU 1 [ 122.166900] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Bay event [ 122.355095] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 122.355100] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 122.355120] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 122.355125] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 122.355177] usb usb1: root hub lost power or was reset [ 122.355199] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 122.355204] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 122.355272] usb usb2: root hub lost power or was reset [ 122.355294] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 122.355299] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 122.355351] usb usb6: root hub lost power or was reset [ 122.359236] ehci_hcd 0000:00:1a.7: debug port 1 [ 122.359242] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 122.372946] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 122.372976] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 122.372985] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 122.497784] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 122.497860] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 122.497940] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 122.497948] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 122.497953] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 122.498004] usb usb3: root hub lost power or was reset [ 122.498022] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 122.498027] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 122.498078] usb usb4: root hub lost power or was reset [ 122.498096] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 122.498101] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 122.498152] usb usb5: root hub lost power or was reset [ 122.498174] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 122.498183] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 122.498250] usb usb7: root hub lost power or was reset [ 122.502131] ehci_hcd 0000:00:1d.7: debug port 1 [ 122.502137] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 122.502162] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20040300, writing 20070300) [ 122.502190] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 122.502270] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 122.502315] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407) [ 122.502360] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 122.516838] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 122.529126] PM: Writing back config space on device 0000:09:00.0 at offset c (was 0, writing dfad0000) [ 122.529154] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100106, writing 100506) [ 122.590977] PM: Writing back config space on device 0000:03:01.0 at offset f (was 14001ff, writing 5c001ff) [ 122.591004] PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 824000, writing 82a800) [ 122.591011] PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 4100007, writing 4100087) [ 122.591036] Yenta O2: res at 0x94/0xD4: 00/ea [ 122.591037] Yenta O2: enabling read prefetch/write burst [ 122.745779] PM: Writing back config space on device 0000:03:01.4 at offset f (was 100, writing 103) [ 122.745803] PM: Writing back config space on device 0000:03:01.4 at offset 5 (was 0, writing fe6fe800) [ 122.745810] PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing fe6ff000) [ 122.745817] PM: Writing back config space on device 0000:03:01.4 at offset 3 (was 0, writing 4010) [ 122.745825] PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100080, writing 2180117) [ 122.619021] ata3: SATA link down (SStatus 0 SControl 300) [ 122.830640] pnp: Res cnt 2 [ 122.838113] pnp: res cnt 2 [ 122.838114] pnp: Encode irq [ 122.838115] pnp: Encode io [ 122.845289] serial 00:09: activated [ 122.782508] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 122.784550] ata1.00: configured for UDMA/100 [ 122.798554] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 122.798576] sd 0:0:0:0: [sda] Write Protect is off [ 122.798579] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 122.798612] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.442501] sd 0:0:0:0: [sda] Starting disk [ 124.467524] do_drive_get_GTF: Run _GTF error: status = 0x5 [ 124.467524] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 124.468158] hda: UDMA/33 mode selected [ 124.510014] Restarting tasks ... <6>usb 1-2: USB disconnect, address 3 [ 124.524315] done. [ 124.651641] usb 5-1: USB disconnect, address 3 [ 124.651646] usb 5-1.2: USB disconnect, address 5 [ 124.779585] usb 5-2: USB disconnect, address 4 [ 125.862319] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 126.050633] usb 1-2: configuration #1 chosen from 1 choice [ 126.311979] usb 1-2: New USB device found, idVendor=413c, idProduct=8140 [ 126.311984] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 126.549536] usb 5-1: new full speed USB device using uhci_hcd and address 6 [ 126.455994] usb 5-1: configuration #1 chosen from 1 choice [ 126.458016] hub 5-1:1.0: USB hub found [ 126.459912] hub 5-1:1.0: 4 ports detected [ 126.569858] usb 5-1: New USB device found, idVendor=0b97, idProduct=7761 [ 126.569868] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 126.808228] usb 5-2: new full speed USB device using uhci_hcd and address 7 [ 126.982550] usb 5-2: configuration #1 chosen from 1 choice [ 126.982728] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 126.982728] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 126.982728] usb 5-2: Product: Biometric Coprocessor [ 126.982728] usb 5-2: Manufacturer: STMicroelectronics [ 127.188237] usb 5-1.2: new full speed USB device using uhci_hcd and address 8 [ 127.301244] usb 5-1.2: configuration #1 chosen from 1 choice [ 127.301449] usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772 [ 127.301449] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 127.301449] usb 5-1.2: Product: O2Micro CCID SC Reader [ 127.301449] usb 5-1.2: Manufacturer: O2 [ 131.137161] wlan0: Initial auth_alg=0 [ 131.137179] wlan0: authenticate with AP 00:0c:41:9d:64:c2 [ 131.414772] wlan0: Initial auth_alg=0 [ 131.414786] wlan0: authenticate with AP 00:0c:41:9d:64:c2 [ 131.414821] wlan0: RX authentication from 00:0c:41:9d:64:c2 (alg=0 transaction=2 status=0) [ 131.414827] wlan0: authenticated [ 131.414833] wlan0: associate with AP 00:0c:41:9d:64:c2 [ 131.416313] wlan0: authentication frame received from 00:0c:41:9d:64:c2, but not in authenticate state - ignored [ 131.418260] wlan0: authentication frame received from 00:0c:41:9d:64:c2, but not in authenticate state - ignored [ 131.145365] wlan0: RX ReassocResp from 00:0c:41:9d:64:c2 (capab=0x411 status=0 aid=2) [ 131.145374] wlan0: associated [ 214.688933] Syncing filesystems ... done. [ 214.688933] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 214.700037] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 214.700128] PM: Shrinking memory... -done (0 pages freed) [ 214.719065] PM: Freed 0 kbytes in 0.04 seconds (0.00 MB/s) [ 214.721413] ACPI: Preparing to enter system sleep state S4 [ 214.723227] Suspending console(s) [ 214.724834] drm_sysfs_suspend [ 214.724935] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 214.872565] serial 00:09: disabled [ 214.872622] ACPI handle has no context! [ 214.943325] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 214.987782] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 214.987817] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 214.987851] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 214.987885] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 215.003591] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 215.019405] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [ 215.019449] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [ 215.019492] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [ 215.019603] Disabling non-boot CPUs ... [ 215.019612] CPU0 attaching NULL sched-domain. [ 215.019614] CPU1 attaching NULL sched-domain. [ 215.047340] CPU 1 is now offline [ 215.047342] SMP alternatives: switching to UP code [ 215.048557] CPU0 attaching sched-domain: [ 215.048559] domain 0: span 00000001 [ 215.048561] groups: 00000001 [ 215.048741] CPU1 is down [ 215.048865] Extended CMOS year: 2000 [ 215.048961] PM: Creating hibernation image: [ 215.051329] PM: Need to copy 160501 pages [ 215.051329] Extended CMOS year: 2000 [ 215.051329] Enabling non-boot CPUs ... [ 215.051329] CPU0 attaching NULL sched-domain. [ 215.059443] SMP alternatives: switching to SMP code [ 215.060356] Booting processor 1/2 APIC 0x1 [ 216.467233] Initializing CPU#1 [ 216.467233] Calibrating delay using timer specific routine.. 4389.04 BogoMIPS (lpj=8778096) [ 216.467233] CPU: L1 I cache: 32K, L1 D cache: 32K [ 216.467233] CPU: L2 cache: 4096K [ 216.467233] CPU 1/1 -> Node 0 [ 216.467233] CPU: Physical Processor ID: 0 [ 216.467233] CPU: Processor Core ID: 1 [ 216.467233] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a [ 215.152000] CPU0 attaching sched-domain: [ 215.152003] domain 0: span 00000003 [ 215.152004] groups: 00000001 00000002 [ 215.152007] domain 1: span 00000003 [ 215.152008] groups: 00000003 [ 215.152010] CPU1 attaching sched-domain: [ 215.152011] domain 0: span 00000003 [ 215.152013] groups: 00000002 00000001 [ 215.152015] domain 1: span 00000003 [ 215.152016] groups: 00000003 [ 216.467233] CPU1 is up [ 216.467239] Switched to high resolution mode on CPU 1 [ 215.168991] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Bay event [ 216.529391] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 216.529396] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 216.529416] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 216.529420] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 216.529472] usb usb1: root hub lost power or was reset [ 216.529493] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 216.529498] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 216.529567] usb usb2: root hub lost power or was reset [ 216.529588] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 216.529593] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 216.529646] usb usb6: root hub lost power or was reset [ 216.533523] ehci_hcd 0000:00:1a.7: debug port 1 [ 216.533529] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 216.546428] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 216.546457] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 216.546467] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 216.671014] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 216.671090] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 216.671165] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 216.671173] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 216.671179] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 216.671230] usb usb3: root hub lost power or was reset [ 216.671248] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 216.671253] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 216.671305] usb usb4: root hub lost power or was reset [ 216.671322] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 216.671328] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 216.671379] usb usb5: root hub lost power or was reset [ 216.671410] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 216.671418] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 216.671472] usb usb7: root hub lost power or was reset [ 216.675344] ehci_hcd 0000:00:1d.7: debug port 1 [ 216.675350] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 216.675375] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20040300, writing 20070300) [ 216.675404] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 216.675484] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 216.675529] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407) [ 216.675573] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 216.690100] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 216.702399] PM: Writing back config space on device 0000:09:00.0 at offset c (was 0, writing dbad0000) [ 216.702427] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100106, writing 100506) [ 216.764196] PM: Writing back config space on device 0000:03:01.0 at offset f (was 14001ff, writing 5c001ff) [ 216.764223] PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 824000, writing 82a800) [ 216.764230] PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 4100007, writing 4100087) [ 216.764254] Yenta O2: res at 0x94/0xD4: 00/ea [ 216.764255] Yenta O2: enabling read prefetch/write burst [ 216.920027] PM: Writing back config space on device 0000:03:01.4 at offset f (was 100, writing 103) [ 216.920051] PM: Writing back config space on device 0000:03:01.4 at offset 5 (was 0, writing fe6fe800) [ 216.920058] PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing fe6ff000) [ 216.920065] PM: Writing back config space on device 0000:03:01.4 at offset 3 (was 0, writing 4010) [ 216.920073] PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100080, writing 2180117) [ 215.653740] ata3: SATA link down (SStatus 0 SControl 300) [ 217.003977] pnp: Res cnt 2 [ 217.011383] pnp: res cnt 2 [ 217.011384] pnp: Encode irq [ 217.011385] pnp: Encode io [ 217.018625] serial 00:09: activated [ 215.816401] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 215.818443] ata1.00: configured for UDMA/100 [ 215.832446] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 215.832468] sd 0:0:0:0: [sda] Write Protect is off [ 215.832471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 215.832504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 217.480507] sd 0:0:0:0: [sda] Starting disk [ 218.212824] do_drive_get_GTF: Run _GTF error: status = 0x5 [ 218.213712] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 218.214529] hda: UDMA/33 mode selected [ 218.256455] Restarting tasks ... <6>usb 1-2: USB disconnect, address 4 [ 218.269961] done. [ 218.397075] usb 5-1: USB disconnect, address 6 [ 218.397079] usb 5-1.2: USB disconnect, address 8 [ 218.525014] usb 5-2: USB disconnect, address 7 [ 219.615552] usb 5-1: new full speed USB device using uhci_hcd and address 9 [ 219.767000] usb 5-1: configuration #1 chosen from 1 choice [ 219.767173] hub 5-1:1.0: USB hub found [ 219.768617] hub 5-1:1.0: 4 ports detected [ 219.875599] usb 5-1: New USB device found, idVendor=0b97, idProduct=7761 [ 219.875610] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 220.114410] usb 5-2: new full speed USB device using uhci_hcd and address 10 [ 220.283517] usb 5-2: configuration #1 chosen from 1 choice [ 220.283784] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 220.283784] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 220.283784] usb 5-2: Product: Biometric Coprocessor [ 220.283784] usb 5-2: Manufacturer: STMicroelectronics [ 220.519549] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 220.702401] usb 1-2: configuration #1 chosen from 1 choice [ 220.706157] usb 1-2: New USB device found, idVendor=413c, idProduct=8140 [ 220.706169] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 220.911570] usb 5-1.2: new full speed USB device using uhci_hcd and address 11 [ 221.028870] usb 5-1.2: configuration #1 chosen from 1 choice [ 221.029102] usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772 [ 221.029102] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 221.029102] usb 5-1.2: Product: O2Micro CCID SC Reader [ 221.029102] usb 5-1.2: Manufacturer: O2 [ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183245] wlan0: deauthenticated [ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7) [ 224.183246] wlan0: authenticate with AP 00:0c:41:9d:64:c2 [ 224.187164] wlan0: RX authentication from 00:0c:41:9d:64:c2 (alg=0 transaction=2 status=0) [ 224.187173] wlan0: authenticated [ 224.187179] wlan0: associate with AP 00:0c:41:9d:64:c2 [ 224.191265] wlan0: RX ReassocResp from 00:0c:41:9d:64:c2 (capab=0x411 status=0 aid=2) [ 224.191273] wlan0: associated [ 225.648612] wlan0: Initial auth_alg=0 [ 225.648627] wlan0: authenticate with AP 00:18:84:21:ef:2b [ 225.651138] wlan0: Initial auth_alg=0 [ 225.651152] wlan0: authenticate with AP 00:18:84:21:ef:2b [ 225.651186] wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0) [ 225.651191] wlan0: authenticated [ 225.651197] wlan0: associate with AP 00:18:84:21:ef:2b [ 225.653431] wlan0: authentication frame received from 00:18:84:21:ef:2b, but not in authenticate state - ignored [ 225.657286] wlan0: Initial auth_alg=0 [ 225.657298] wlan0: authenticate with AP 00:18:84:21:ef:2b [ 225.657328] wlan0: association frame received from 00:18:84:21:ef:2b, but not in associate state - ignored [ 225.659210] wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0) [ 225.659219] wlan0: authenticated [ 225.659225] wlan0: associate with AP 00:18:84:21:ef:2b [ 225.664308] wlan0: RX ReassocResp from 00:18:84:21:ef:2b (capab=0x431 status=0 aid=1) [ 225.664320] wlan0: associated [ 225.664400] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20 [ 225.664407] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 225.664414] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 225.664420] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 225.687616] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20 [ 225.687616] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 225.687616] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 225.687616] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 224.807692] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 226.484082] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 226.484260] PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100102, writing 100106) [ 226.547091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 234.300158] wlan0: disassociate(reason=3) [ 238.546500] wlan0: Initial auth_alg=0 [ 238.546514] wlan0: authenticate with AP 00:0f:cc:b4:4e:14 [ 236.844757] wlan0: Initial auth_alg=0 [ 236.844757] wlan0: authenticate with AP 00:0f:cc:b4:4e:14 [ 238.549303] wlan0: RX authentication from 00:0f:cc:b4:4e:14 (alg=0 transaction=2 status=0) [ 238.549313] wlan0: authenticated [ 238.549319] wlan0: associate with AP 00:0f:cc:b4:4e:14 [ 238.554791] wlan0: RX AssocResp from 00:0f:cc:b4:4e:14 (capab=0x451 status=0 aid=1) [ 238.554803] wlan0: associated [ 238.554813] wlan0: switched to long barker preamble (BSSID=00:0f:cc:b4:4e:14) [ 238.555608] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready