| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 31 Mar 2008 09:30:49 +0530
From: "Sanjeev Aditya Naga" <sanjeev.kernel@...il.com>
To: linux-kernel@...r.kernel.org
Subject: Re: [>=2.6.23][BUG] Oops on power disconnection
Hi,
Please find the dmesg below:
BTW, I tried basically with kernels after 2.6.21 and I get the
same result.
Kind Regards,
Sanjeev
Initializing cgroup subsys cpuset
Linux version 2.6.24.3 (root@...ksha.cultuzz.in) (gcc version 4.3.0
20080222 (Red Hat 4.3.0-0.11) (GCC) ) #5 SMP Tue Apr 1 00:04:55 IST
2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000057e80000 (usable)
BIOS-e820: 0000000057e80000 - 0000000057e96000 (ACPI data)
BIOS-e820: 0000000057e96000 - 0000000057f00000 (ACPI NVS)
BIOS-e820: 0000000057f00000 - 0000000058000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
510MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7130
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 360064) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 360064
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 360064
On node 0 totalpages: 360064
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1021 pages used for memmap
HighMem zone: 129667 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F7070, 0014 (r0 TOSQCI)
ACPI: RSDT 57E8F4EF, 0038 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: FACP 57E95D7C, 0074 (r1 ATI Bonefish 6040000 ATI F4240)
ACPI: DSDT 57E8FF4C, 5E30 (r1 TOSQCI L10 6040000 MSFT 2000002)
ACPI: FACS 57E96FC0, 0040
ACPI: APIC 57E95DF0, 005E (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 57E95E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: SLIC 57E95E8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: SSDT 57E8F527, 0535 (r1 PmRef CpuPm 3000 INTL 20050228)
ACPI: DMI detected: Toshiba
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 58000000:88000000)
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357251
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07bd000 soft=c079d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1600.026 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1419592k/1440256k available (2263k kernel code, 19312k
reserved, 1109k data, 292k init, 522752k highmem)
virtual kernel memory layout:
fixmap : 0xffc52000 - 0xfffff000 (3764 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0751000 - 0xc079a000 ( 292 kB)
.data : 0xc0635db8 - 0xc074b56c (1109 kB)
.text : 0xc0400000 - 0xc0635db8 (2263 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3202.37 BogoMIPS (lpj=1601186)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000
0000c189 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940
0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... successfully read 21669 bytes
from /DSDT.aml.
ACPI: Table DSDT replaced by host OS
ACPI: DSDT 00000000, 54A5 (r1 TOSQCI L10 6040000 INTL 20061109)
ACPI: DSDT override uses original SSDTs unless
"acpi_no_auto_ssdt"CPU0: Intel Genuine Intel(R) CPU T2060 @
1.60GHz stepping 0c
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07be000 soft=c079e000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3199.52 BogoMIPS (lpj=1599764)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000
0000c189 00000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940
0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c
Total of 2 processors activated (6401.90 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1680 bytes
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
Time: 2:11:42 Date: 04/02/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd494, last bus=14
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (dswload-0664): [\___] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception (psloop-0225): AE_NOT_FOUND, During name lookup/catalog
[20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._INI] (Node f781a6c0), AE_NOT_FOUND
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x200-0x20f has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x530-0x537 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f could not be reserved
system 00:08: ioport range 0x8210-0x821f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x280-0x293 has been reserved
system 00:08: ioport range 0x87f-0x87f has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:09: iomem range 0xc0004800-0xc00057ff has been reserved
system 00:09: iomem range 0x0-0xfff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: c0000000-c00fffff
PREFETCH window: d0000000-dfffffff
PCI: Bus 10, cardbus bridge: 0000:09:01.0
IO window: 0000a400-0000a4ff
IO window: 0000a800-0000a8ff
PREFETCH window: 64000000-67ffffff
MEM window: 68000000-6bffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: c0100000-c01fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:09:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 20 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2639k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1207102301.744:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:05.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 57E8FCDD, 01E8 (r1 PmRef Cpu0Ist 3000 INTL 20050228)
ACPI: SSDT 57E8FA5C, 01FC (r1 PmRef Cpu0Cst 3001 INTL 20050228)
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 57E8FEC5, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
ACPI: SSDT 57E8FC58, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (60 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0100000 - 0xc01fffff
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 4:959:155
Freeing unused kernel memory: 292k freed
Write protecting the kernel read-only data: 880k
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0406000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0404000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0405000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite L35 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /class/input/input2
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
sata_sil 0000:00:12.0: version 2.3
PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@...0407000 tf 0xc0407080 irq 18
ata2: SATA max UDMA/100 mmio m512@...0407000 tf 0xc04070c0 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:14.1 to 64
ACPI: PCI interrupt for device 0000:00:14.1 disabled
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
scsi2 : pata_atiixp
scsi3 : pata_atiixp
ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
ata3: port disabled. ignoring.
ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1207102314.976:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
input: PC Speaker as /class/input/input3
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
input: Video Bus as /class/input/input4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xf8918000, 00:1b:24:1e:9a:57, IRQ 21
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input7
ACPI: Power Button (CM) [PWRB]
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0xb
ALSA sound/pci/hda/hda_codec.c:2137: hda_codec: model '3stack' is selected
ALSA sound/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000
ALSA sound/pci/hda/patch_si3054.c:250: Link Frame Detect(FDT) is not
ready (line status: 0000)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@...hat.com
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on sda4, internal journal
fuse init (API version 7.9)
Adding 3116600k swap on /dev/sda3. Priority:-1 extents:1 across:3116600k
IA-32 Microcode Update Driver: v1.14a <tigran@...azian.fsnet.co.uk>
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
openser[1699]: segfault at 00000009 eip 0045a625 esp bf9347fc error 4
Bridge firewalling registered
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
virbr0: starting userspace STP failed, starting kernel STP
virbr0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hda-intel: Invalid position buffer, using LPIB read method instead.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
WARNING: at lib/kref.c:33 kref_get() (Not tainted)
Pid: 69, comm: kacpi_notify Not tainted 2.6.24.3 #5
[<c04ff274>] kref_get+0x3d/0x45
[<c04fe65d>] kobject_get+0xf/0x13
[<c04fe84d>] kobject_add+0x82/0x176
[<c04fe9eb>] kobject_register+0x19/0x2d
[<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c05b03fd>] cpuidle_enable_device+0x31/0x9b
[<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
[<c0543ae2>] acpi_processor_notify+0x8b/0xf4
[<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
[<c0526630>] acpi_os_execute_notify+0x22/0x2b
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c043c212>] run_workqueue+0x7d/0x107
[<c043fa5b>] prepare_to_wait+0x28/0x45
[<c043c35a>] worker_thread+0xbe/0xca
[<c043f8ff>] autoremove_wake_function+0x0/0x35
[<c043c29c>] worker_thread+0x0/0xca
[<c043f679>] kthread+0x38/0x5d
[<c043f641>] kthread+0x0/0x5d
[<c0406477>] kernel_thread_helper+0x7/0x10
=======================
BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000020
printing eip: c04c4716 *pde = 578c2067
Oops: 0000 [#1] SMP
Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
ehci_hcd(U)
Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
EIP is at sysfs_addrm_start+0x21/0x81
EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
Call Trace:
[<c04c4b45>] create_dir+0x33/0x6c
[<c04c4bab>] sysfs_create_dir+0x2d/0x40
[<c04fe65d>] kobject_get+0xf/0x13
[<c04fe8a8>] kobject_add+0xdd/0x176
[<c04fe9eb>] kobject_register+0x19/0x2d
[<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c05b03fd>] cpuidle_enable_device+0x31/0x9b
[<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
[<c0543ae2>] acpi_processor_notify+0x8b/0xf4
[<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
[<c0526630>] acpi_os_execute_notify+0x22/0x2b
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c043c212>] run_workqueue+0x7d/0x107
[<c043fa5b>] prepare_to_wait+0x28/0x45
[<c043c35a>] worker_thread+0xbe/0xca
[<c043f8ff>] autoremove_wake_function+0x0/0x35
[<c043c29c>] worker_thread+0x0/0xca
[<c043f679>] kthread+0x38/0x5d
[<c043f641>] kthread+0x0/0x5d
[<c0406477>] kernel_thread_helper+0x7/0x10
=======================
Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
c6 83 ec 04 89 d3 31 c0 f3 ab b8 90 3f 72 c0 89 16 e8 6a cf 16 00 <8b>
53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
---[ end trace 863306c7f7bb36f7 ]---
atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists