lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <a44c031b8520b271479b.1207158844@localhost>
Date:	Wed, 02 Apr 2008 10:54:04 -0700
From:	Jeremy Fitzhardinge <jeremy@...p.org>
To:	Ingo Molnar <mingo@...e.hu>
Cc:	LKML <linux-kernel@...r.kernel.org>,
	Isaku Yamahata <yamahata@...inux.co.jp>
Subject: [PATCH 15 of 24] xen blkfront: Delay wait for block devices until
	after the disk is added

From: Christian Limpach <Christian.Limpach@...source.com>

When the xen block frontend driver is built as a module the module load
is only synchronous up to the point where the frontend and the backend
become connected rather than when the disk is added.

This means that there can be a race on boot between loading the module and
loading the dm-* modules and doing the scan for LVM physical volumes (all
in the initrd). In the failure case the disk is not present until after the
scan for physical volumes is complete.

Taken from:

  http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/11483a00c017

Signed-off-by: Christian Limpach <Christian.Limpach@...source.com>
Signed-off-by: Mark McLoughlin <markmc@...hat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@...rix.com>
---
 drivers/block/xen-blkfront.c      |   11 +++++++++++
 drivers/xen/xenbus/xenbus_probe.c |    5 ++++-
 include/xen/xenbus.h              |    2 +-
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -88,6 +88,7 @@
 	struct blk_shadow shadow[BLK_RING_SIZE];
 	unsigned long shadow_free;
 	int feature_barrier;
+	int is_ready;
 
 	/**
 	 * The number of people holding this device open.  We won't allow a
@@ -839,6 +840,8 @@
 	spin_unlock_irq(&blkif_io_lock);
 
 	add_disk(info->gd);
+
+	info->is_ready = 1;
 }
 
 /**
@@ -931,6 +934,13 @@
 	return 0;
 }
 
+static int blkfront_is_ready(struct xenbus_device *dev)
+{
+	struct blkfront_info *info = dev->dev.driver_data;
+
+	return info->is_ready;
+}
+
 static int blkif_open(struct inode *inode, struct file *filep)
 {
 	struct blkfront_info *info = inode->i_bdev->bd_disk->private_data;
@@ -977,6 +987,7 @@
 	.remove = blkfront_remove,
 	.resume = blkfront_resume,
 	.otherend_changed = backend_changed,
+	.is_ready = blkfront_is_ready,
 };
 
 static int __init xlblk_init(void)
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -846,6 +846,7 @@
 {
 	struct xenbus_device *xendev = to_xenbus_device(dev);
 	struct device_driver *drv = data;
+	struct xenbus_driver *xendrv;
 
 	/*
 	 * A device with no driver will never connect. We care only about
@@ -858,7 +859,9 @@
 	if (drv && (dev->driver != drv))
 		return 0;
 
-	return (xendev->state != XenbusStateConnected);
+	xendrv = to_xenbus_driver(dev->driver);
+	return (xendev->state != XenbusStateConnected ||
+		(xendrv->is_ready && !xendrv->is_ready(xendev)));
 }
 
 static int exists_disconnected_device(struct device_driver *drv)
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -97,6 +97,7 @@
 	int (*uevent)(struct xenbus_device *, char **, int, char *, int);
 	struct device_driver driver;
 	int (*read_otherend_details)(struct xenbus_device *dev);
+	int (*is_ready)(struct xenbus_device *dev);
 };
 
 static inline struct xenbus_driver *to_xenbus_driver(struct device_driver *drv)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ