linux-kernel - Re: linux-2.6.25-rc8, an oddity

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <200804022027.11942.gene.heskett@verizon.net>
Date:	Wed, 2 Apr 2008 20:27:11 -0400
From:	Gene Heskett <gene.heskett@...il.com>
To:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Linux Kernel Mailing List 
	<linux-kernel-owner@...r.kernel.org>,
	Linux Kernel Mailing List <postmaster@...r.kernel.org>
Subject: Re: linux-2.6.25-rc8, an oddity

This will be the third time I've sent this message in about 10 hours, with it 
never making it to the list, but I've picked up around 400 messages since 
because I am subscribed.  Please check as to why I cannot post?

Greetings;

I've switched to an ati based R610 chipset video card, and the radeonhd 
driver, so I can rejoin the canaries that test this stuff.  All brought about 
by my 200GB boot drive giving itself an appendectomy as it was dying of 
whatever they die of when the logs show an incessant attempt to reset the 
drive.  There is now a 500GB on the end of that cable.

3 observations, but I believe only the first is related to this kernel.

1. I note when I logged in (always to runlevel 3, no x at that point) that it 
gave me tty1, instead of the usual tty0.

Is there a reason why the non-x login screen wasn't /dev/tty0?  It does 
exist..

2. Also, if I exit x, expecting to see my original screen, its not there, no 
drive at all to the monitor so it shuts down.  I think I can blindly startx 
again, or type reboot, or give it the vulcan nerve pinch but I don't get 
video back until the reboots post finds it.  This is regardless of the kernel 
running apparently I've tried fedora's latest, 2.6.24.4, and now 2.6.25-rc8.

3. Can I modprobe a vesa related module to fix this somehow?  There are 
several in the /lib/modules/`uname -r`/drivers/video subdir tree but they do 
not show in an lsmod as being loaded.  This card is shown in dmesg only as a 
single entry:

0.526924] pci 0000:02:00.0: Boot video device

and shows as this in lspci -nv now:

02:00.0 0300: 1002:94c4 (prog-if 00 [VGA controller])
        Subsystem: 1545:0028
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 5
        Memory at d0000000 (32-bit, prefetchable) [size=256M]
        I/O ports at c000 [size=256]
        Memory at e1000000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] AGP version 3.0

Thanks for any help/info here.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Success is getting what you want; happiness is wanting what you get.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/