| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080407231050.GA27510@elf.ucw.cz>
Date: Tue, 8 Apr 2008 01:10:50 +0200
From: Pavel Machek <pavel@....cz>
To: kernel list <linux-kernel@...r.kernel.org>, kaszak@...il.com,
lcostantino@...il.com
Subject: w35und: we don't need windows code in linux driver
One more patch... but this one is untested (have to get some sleep).
diff --git a/drivers/net/wireless/winbond/winbondport/wbhal.c b/drivers/net/wireless/winbond/winbondport/wbhal.c
index 596bf0b..663f615 100644
--- a/drivers/net/wireless/winbond/winbondport/wbhal.c
+++ b/drivers/net/wireless/winbond/winbondport/wbhal.c
@@ -1,10 +1,11 @@
#include "os_common.h"
-//-----------------------------------------------------------------------------------
+
void hal_start_tx0( phw_data_t pHwData )
{
- if( !pHwData->SurpriseRemove ) Wb35Tx_start( pHwData );
+ if (!pHwData->SurpriseRemove)
+ Wb35Tx_start( pHwData );
}
//-----------------------------------------------------------------------------------
@@ -18,15 +19,14 @@ void hal_remove_mapping_key( phw_data_t
WBDEBUG(("hal_remove_mapping_key\n"));
#endif
- for( i=MAPPING_KEY_START_INDEX; i<MAX_KEY_TABLE; i++ )
- {
+ for (i=MAPPING_KEY_START_INDEX; i<MAX_KEY_TABLE; i++) {
if( OS_MEMORY_COMPARE( pmac_addr, pHwData->Key_slot[i], MAC_ADDR_LENGTH ) )
break;
}
if( i != MAX_KEY_TABLE ) //Find the same index
{
// Clear the mac address
- OS_MEMORY_CLEAR( pHwData->Key_slot[i], MAC_ADDR_LENGTH );
+ memset(pHwData->Key_slot[i], 0, MAC_ADDR_LENGTH);
//Writing into register to clear the valid bit
Wb35Reg_Write( pHwData, 0x0820, 0x0 );//Value
@@ -771,12 +771,13 @@ void hal_set_ssid( phw_data_t pHwData,
pWb35Reg->M4C_MacStatus |= tmp;
Wb35Reg_Write( pHwData, 0x084c, pWb35Reg->M4C_MacStatus );
}
-//---------------------------------------------------------------------------------------------------
+
void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel )
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
- if( pHwData->SurpriseRemove ) return;
+ if( pHwData->SurpriseRemove )
+ return;
RFSynthesizer_SwitchingChannel( pHwData, channel );// Switch channel
pHwData->Channel = channel.ChanNo;
@@ -786,9 +787,8 @@ void hal_set_current_channel_ex( phw_da
#endif
pWb35Reg->M28_MacControl &= ~0xff; // Clean channel information field
pWb35Reg->M28_MacControl |= channel.ChanNo;
- //Wb35Reg_Write( pHwData, 0x0828, pWb35Reg->M28_MacControl );// Writing Channel information
Wb35Reg_WriteWithCallbackValue( pHwData, 0x0828, pWb35Reg->M28_MacControl,
- (PCHAR)&channel, sizeof(ChanInfo));
+ (PCHAR)&channel, sizeof(ChanInfo));
}
//---------------------------------------------------------------------------------------------------
void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel )
@@ -816,8 +816,8 @@ void hal_set_accept_broadcast( phw_data
pWb35Reg->M00_MacControl &= ~0x02000000;//The HW value
- if( enable ) pWb35Reg->M00_MacControl |= 0x02000000;//The HW value
-
+ if (enable)
+ pWb35Reg->M00_MacControl |= 0x02000000;//The HW value
Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
}
@@ -827,14 +827,11 @@ void hal_set_accept_promiscuous( phw_dat
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
- if( pHwData->SurpriseRemove ) return;
- if(enable)
- {
+ if (pHwData->SurpriseRemove) return;
+ if (enable) {
pWb35Reg->M00_MacControl |= 0x00400000;
Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
- }
- else
- {
+ } else {
pWb35Reg->M00_MacControl&=~0x00400000;
Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
}
@@ -847,7 +844,7 @@ void hal_set_accept_multicast( phw_data
if( pHwData->SurpriseRemove ) return;
pWb35Reg->M00_MacControl &= ~0x01000000;//The HW value
- if( enable ) pWb35Reg->M00_MacControl |= 0x01000000;//The HW value
+ if (enable) pWb35Reg->M00_MacControl |= 0x01000000;//The HW value
Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
}
//---------------------------------------------------------------------------------------------------
diff --git a/drivers/net/wireless/winbond/winbondport/wbhal_f.h b/drivers/net/wireless/winbond/winbondport/wbhal_f.h
index 090ee2b..a6e2f52 100644
--- a/drivers/net/wireless/winbond/winbondport/wbhal_f.h
+++ b/drivers/net/wireless/winbond/winbondport/wbhal_f.h
@@ -16,69 +16,69 @@ #endif
//====================================================================================
// Function declaration
//====================================================================================
-void hal_remove_mapping_key ( phw_data_t pHwData, PUCHAR pmac_addr );
-void hal_remove_default_key ( phw_data_t pHwData, u32 index );
-unsigned char hal_set_mapping_key ( phw_data_t Adapter, PUCHAR pmac_addr, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data );
-unsigned char hal_set_default_key ( phw_data_t Adapter, u8 index, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data );
-void hal_clear_all_default_key ( phw_data_t pHwData );
-void hal_clear_all_group_key ( phw_data_t pHwData );
-void hal_clear_all_mapping_key ( phw_data_t pHwData );
-void hal_clear_all_key ( phw_data_t pHwData );
-void hal_get_ethernet_address ( phw_data_t pHwData, PUCHAR current_address );
-void hal_set_ethernet_address ( phw_data_t pHwData, PUCHAR current_address );
-void hal_get_permanent_address ( phw_data_t pHwData, PUCHAR pethernet_address );
-unsigned char hal_init_hardware ( phw_data_t pHwData, PADAPTER Adapter );
-void hal_set_power_save_mode ( phw_data_t pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim );
-void hal_get_power_save_mode ( phw_data_t pHwData, PBOOLEAN pin_pwr_save );
-void hal_set_slot_time ( phw_data_t pHwData, u8 type );
+void hal_remove_mapping_key( phw_data_t pHwData, PUCHAR pmac_addr );
+void hal_remove_default_key( phw_data_t pHwData, u32 index );
+unsigned char hal_set_mapping_key( phw_data_t Adapter, PUCHAR pmac_addr, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data );
+unsigned char hal_set_default_key( phw_data_t Adapter, u8 index, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data );
+void hal_clear_all_default_key( phw_data_t pHwData );
+void hal_clear_all_group_key( phw_data_t pHwData );
+void hal_clear_all_mapping_key( phw_data_t pHwData );
+void hal_clear_all_key( phw_data_t pHwData );
+void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address );
+void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address );
+void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address );
+unsigned char hal_init_hardware( phw_data_t pHwData, PADAPTER Adapter );
+void hal_set_power_save_mode( phw_data_t pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim );
+void hal_get_power_save_mode( phw_data_t pHwData, PBOOLEAN pin_pwr_save );
+void hal_set_slot_time( phw_data_t pHwData, u8 type );
#define hal_set_atim_window( _A, _ATM )
-void hal_set_rates ( phw_data_t pHwData, PUCHAR pbss_rates, u8 length, unsigned char basic_rate_set );
+void hal_set_rates( phw_data_t pHwData, PUCHAR pbss_rates, u8 length, unsigned char basic_rate_set );
#define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE )
#define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE )
-void hal_start_bss ( phw_data_t pHwData, u8 mac_op_mode );
-void hal_join_request ( phw_data_t pHwData, u8 bss_type ); // 0:BSS STA 1:IBSS STA//
-void hal_stop_sync_bss ( phw_data_t pHwData );
-void hal_resume_sync_bss ( phw_data_t pHwData);
-void hal_set_aid ( phw_data_t pHwData, u16 aid );
-void hal_set_bssid ( phw_data_t pHwData, PUCHAR pbssid );
-void hal_get_bssid ( phw_data_t pHwData, PUCHAR pbssid );
-void hal_set_beacon_period ( phw_data_t pHwData, u16 beacon_period );
-void hal_set_listen_interval ( phw_data_t pHwData, u16 listen_interval );
-void hal_set_cap_info ( phw_data_t pHwData, u16 capability_info );
-void hal_set_ssid ( phw_data_t pHwData, PUCHAR pssid, u8 ssid_len );
-void hal_set_current_channel ( phw_data_t pHwData, ChanInfo channel );
-void hal_set_current_channel_ex ( phw_data_t pHwData, ChanInfo channel );
-void hal_get_current_channel ( phw_data_t pHwData, ChanInfo *channel );
-void hal_set_accept_broadcast ( phw_data_t pHwData, u8 enable );
-void hal_set_accept_multicast ( phw_data_t pHwData, u8 enable );
-void hal_set_accept_beacon ( phw_data_t pHwData, u8 enable );
-void hal_set_multicast_address ( phw_data_t pHwData, PUCHAR address, u8 number );
-u8 hal_get_accept_beacon ( phw_data_t pHwData );
-void hal_stop ( phw_data_t pHwData );
-void hal_halt ( phw_data_t pHwData, void *ppa_data );
-void hal_start_tx0 ( phw_data_t pHwData );
-void hal_set_phy_type ( phw_data_t pHwData, u8 PhyType );
-void hal_get_phy_type ( phw_data_t pHwData, u8 *PhyType );
-unsigned char hal_reset_hardware ( phw_data_t pHwData, void* ppa );
-void hal_set_cwmin ( phw_data_t pHwData, u8 cwin_min );
-#define hal_get_cwmin( _A ) ( (_A)->cwmin )
-void hal_set_cwmax ( phw_data_t pHwData, u16 cwin_max );
-#define hal_get_cwmax( _A ) ( (_A)->cwmax )
-void hal_set_rsn_wpa ( phw_data_t pHwData, u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode);
+void hal_start_bss( phw_data_t pHwData, u8 mac_op_mode );
+void hal_join_request( phw_data_t pHwData, u8 bss_type ); // 0:BSS STA 1:IBSS STA//
+void hal_stop_sync_bss( phw_data_t pHwData );
+void hal_resume_sync_bss( phw_data_t pHwData);
+void hal_set_aid( phw_data_t pHwData, u16 aid );
+void hal_set_bssid( phw_data_t pHwData, PUCHAR pbssid );
+void hal_get_bssid( phw_data_t pHwData, PUCHAR pbssid );
+void hal_set_beacon_period( phw_data_t pHwData, u16 beacon_period );
+void hal_set_listen_interval( phw_data_t pHwData, u16 listen_interval );
+void hal_set_cap_info( phw_data_t pHwData, u16 capability_info );
+void hal_set_ssid( phw_data_t pHwData, PUCHAR pssid, u8 ssid_len );
+void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel );
+void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel );
+void hal_get_current_channel( phw_data_t pHwData, ChanInfo *channel );
+void hal_set_accept_broadcast( phw_data_t pHwData, u8 enable );
+void hal_set_accept_multicast( phw_data_t pHwData, u8 enable );
+void hal_set_accept_beacon( phw_data_t pHwData, u8 enable );
+void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number );
+u8 hal_get_accept_beacon( phw_data_t pHwData );
+void hal_stop( phw_data_t pHwData );
+void hal_halt( phw_data_t pHwData, void *ppa_data );
+void hal_start_tx0( phw_data_t pHwData );
+void hal_set_phy_type( phw_data_t pHwData, u8 PhyType );
+void hal_get_phy_type( phw_data_t pHwData, u8 *PhyType );
+unsigned char hal_reset_hardware( phw_data_t pHwData, void* ppa );
+void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min );
+#define hal_get_cwmin( _A ) ( (_A)->cwmin )
+void hal_set_cwmax( phw_data_t pHwData, u16 cwin_max );
+#define hal_get_cwmax( _A ) ( (_A)->cwmax )
+void hal_set_rsn_wpa( phw_data_t pHwData, u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode);
//s32 hal_get_rssi( phw_data_t pHwData, u32 HalRssi );
-s32 hal_get_rssi ( phw_data_t pHwData, u32 *HalRssiArry, u8 Count );
+s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count );
s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count );
-void hal_set_connect_info ( phw_data_t pHwData, unsigned char boConnect );
-u8 hal_get_est_sq3 ( phw_data_t pHwData, u8 Count );
-void hal_led_control_1a ( phw_data_t pHwData );
-void hal_led_control ( void* S1, phw_data_t pHwData, void* S3, void* S4 );
-void hal_set_rf_power ( phw_data_t pHwData, u8 PowerIndex ); // 20060621 Modify
-void hal_reset_counter ( phw_data_t pHwData );
-void hal_set_radio_mode ( phw_data_t pHwData, unsigned char boValue);
-void hal_descriptor_indicate ( phw_data_t pHwData, PDESCRIPTOR pDes );
-u8 hal_get_antenna_number ( phw_data_t pHwData );
-void hal_set_antenna_number ( phw_data_t pHwData, u8 number );
-u32 hal_get_bss_pk_cnt ( phw_data_t pHwData );
+void hal_set_connect_info( phw_data_t pHwData, unsigned char boConnect );
+u8 hal_get_est_sq3( phw_data_t pHwData, u8 Count );
+void hal_led_control_1a( phw_data_t pHwData );
+void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 );
+void hal_set_rf_power( phw_data_t pHwData, u8 PowerIndex ); // 20060621 Modify
+void hal_reset_counter( phw_data_t pHwData );
+void hal_set_radio_mode( phw_data_t pHwData, unsigned char boValue);
+void hal_descriptor_indicate( phw_data_t pHwData, PDESCRIPTOR pDes );
+u8 hal_get_antenna_number( phw_data_t pHwData );
+void hal_set_antenna_number( phw_data_t pHwData, u8 number );
+u32 hal_get_bss_pk_cnt( phw_data_t pHwData );
#define hal_get_region_from_EEPROM( _A ) ( (_A)->Wb35Reg.EEPROMRegion )
void hal_set_accept_promiscuous ( phw_data_t pHwData, u8 enable);
#define hal_get_tx_buffer( _A, _B ) Wb35Tx_get_tx_buffer( _A, _B )
@@ -88,9 +88,9 @@ #define hal_driver_init_OK( _A ) (_A->Is
#define hal_rssi_boundary_high( _A ) (_A->RSSI_high)
#define hal_rssi_boundary_low( _A ) (_A->RSSI_low)
#define hal_scan_interval( _A ) (_A->Scan_Interval)
-void hal_scan_status_indicate ( phw_data_t pHwData, u8 status); // 0: complete, 1: in progress
-void hal_system_power_change ( phw_data_t pHwData, u32 PowerState ); // 20051230 -=D0 1=D1 ..
-void hal_surprise_remove ( phw_data_t pHwData );
+void hal_scan_status_indicate( phw_data_t pHwData, u8 status); // 0: complete, 1: in progress
+void hal_system_power_change( phw_data_t pHwData, u32 PowerState ); // 20051230 -=D0 1=D1 ..
+void hal_surprise_remove( phw_data_t pHwData );
#define PHY_DEBUG( msg, args... )
@@ -106,7 +106,6 @@ unsigned char hal_set_LED( phw_data_t p
//-------------------------------------------------------------------------
// The follow function is unused for IS89C35
//-------------------------------------------------------------------------
-//#define hal_reset_counter(_A)
#define hal_disable_interrupt(_A)
#define hal_enable_interrupt(_A)
#define hal_get_interrupt_type( _A)
diff --git a/drivers/net/wireless/winbond/winbondport/wblinux.c b/drivers/net/wireless/winbond/winbondport/wblinux.c
index 9220e80..27dcca0 100644
--- a/drivers/net/wireless/winbond/winbondport/wblinux.c
+++ b/drivers/net/wireless/winbond/winbondport/wblinux.c
@@ -386,180 +386,161 @@ #endif
}
unsigned char
- WbWLanInitialize( PADAPTER Adapter )
+WbWLanInitialize(PADAPTER Adapter)
{
- phw_data_t pHwData;
- PUCHAR pMacAddr, pMacAddr2;
- u32 InitStep = 0;
- u8 EEPROM_region;
- u8 HwRadioOff;
-
- do
- {
- //
- // Setting default value for Linux
- //
- Adapter->sLocalPara.region_INF = REGION_AUTO;
- Adapter->sLocalPara.TxRateMode = RATE_AUTO;
- psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode
- Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
- Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
- hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 );
- Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
- psLOCAL->bPreambleMode = AUTO_MODE;
- Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
- psSME->bDesiredPowerSave = FALSE;
- psSCAN->BScanEnable = TRUE;
- pHwData = &Adapter->sHwData;
- hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
-
- //
- // Initial each module and variable
- //
- if( !WBLINUX_Initial( Adapter ) )
- {
+ phw_data_t pHwData;
+ PUCHAR pMacAddr, pMacAddr2;
+ u32 InitStep = 0;
+ u8 EEPROM_region;
+ u8 HwRadioOff;
+
+ do {
+ //
+ // Setting default value for Linux
+ //
+ Adapter->sLocalPara.region_INF = REGION_AUTO;
+ Adapter->sLocalPara.TxRateMode = RATE_AUTO;
+ psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode
+ Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
+ Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
+ hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 );
+ Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
+ psLOCAL->bPreambleMode = AUTO_MODE;
+ Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
+ psSME->bDesiredPowerSave = FALSE;
+ psSCAN->BScanEnable = TRUE;
+ pHwData = &Adapter->sHwData;
+ hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
+
+ //
+ // Initial each module and variable
+ //
+ if (!WBLINUX_Initial(Adapter)) {
#ifdef _PE_USB_INI_DUMP_
- WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
+ WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
#endif
- break;
- }
-
- // Initial Software variable
- Adapter->sLocalPara.ShutDowned = FALSE;
-
- //added by ws for wep key error detection
- Adapter->sLocalPara.bWepKeyError= FALSE;//added by ws 02/02/04
- Adapter->sLocalPara.bToSelfPacketReceived = FALSE;
- Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
-
- // Initial USB hal
- InitStep = 1;
- pHwData = &Adapter->sHwData;
- if( !hal_init_hardware( pHwData, Adapter ) )
- break;
-
- EEPROM_region = hal_get_region_from_EEPROM( pHwData );
- if (EEPROM_region != REGION_AUTO)
- psLOCAL->region = EEPROM_region;
- else
- {
- if (psLOCAL->region_INF != REGION_AUTO)
- psLOCAL->region = psLOCAL->region_INF;
- else
- psLOCAL->region = REGION_USA; //default setting
- }
+ break;
+ }
- // Get Software setting flag from hal
- Adapter->sLocalPara.boAntennaDiversity = FALSE;
- if( hal_software_set( pHwData ) & 0x00000001 )
- Adapter->sLocalPara.boAntennaDiversity = TRUE;
+ // Initial Software variable
+ Adapter->sLocalPara.ShutDowned = FALSE;
+
+ //added by ws for wep key error detection
+ Adapter->sLocalPara.bWepKeyError= FALSE;//added by ws 02/02/04
+ Adapter->sLocalPara.bToSelfPacketReceived = FALSE;
+ Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
+
+ // Initial USB hal
+ InitStep = 1;
+ pHwData = &Adapter->sHwData;
+ if (!hal_init_hardware(pHwData, Adapter))
+ break;
+
+ EEPROM_region = hal_get_region_from_EEPROM( pHwData );
+ if (EEPROM_region != REGION_AUTO)
+ psLOCAL->region = EEPROM_region;
+ else {
+ if (psLOCAL->region_INF != REGION_AUTO)
+ psLOCAL->region = psLOCAL->region_INF;
+ else
+ psLOCAL->region = REGION_USA; //default setting
+ }
- //
- // For TS module
- //
- InitStep = 2;
- if( !TS_initial( Adapter ) )
- break;
-
- // For MDS module
- InitStep = 3;
- Mds_initial( Adapter );
-
- //=======================================
- // Initialize the SME, SCAN, MLME, ROAM
- //=======================================
- // #ifdef NDIS51_MINIPORT
- // //For WinXP required
- // vNetDisconnectInd(Adapter);
- // #endif
- InitStep = 4;
- SME_Init(Adapter);
- Scan_Init(Adapter);
- if( !MLME_Init(Adapter) )
- break;
-
- MLMESetExcludeUnencrypted(Adapter, FALSE);
- MLMESetMaxReceiveLifeTime(Adapter, DEFAULT_MAX_RECEIVE_TIME);
-
- InitStep = 5;
- Roam_Init(Adapter);
-
- InitStep = 6;
- // WbNdis51_initial( Adapter );
-
- // If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
- pMacAddr = Adapter->sLocalPara.ThisMacAddress;
- pMacAddr2 = Adapter->sLocalPara.PermanentAddress;
- hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
- if( OS_MEMORY_COMPARE( pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH ) ) // Is equal
- {
- memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH );
- }
- else
- {
- // Set the user define MAC address
- hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress );
- }
+ // Get Software setting flag from hal
+ Adapter->sLocalPara.boAntennaDiversity = FALSE;
+ if (hal_software_set(pHwData) & 0x00000001)
+ Adapter->sLocalPara.boAntennaDiversity = TRUE;
+
+ //
+ // For TS module
+ //
+ InitStep = 2;
+ if (!TS_initial(Adapter))
+ break;
+
+ // For MDS module
+ InitStep = 3;
+ Mds_initial(Adapter);
+
+ //=======================================
+ // Initialize the SME, SCAN, MLME, ROAM
+ //=======================================
+ InitStep = 4;
+ SME_Init(Adapter);
+ Scan_Init(Adapter);
+ if (!MLME_Init(Adapter))
+ break;
+
+ MLMESetExcludeUnencrypted(Adapter, FALSE);
+ MLMESetMaxReceiveLifeTime(Adapter, DEFAULT_MAX_RECEIVE_TIME);
+
+ InitStep = 5;
+ Roam_Init(Adapter);
+
+ InitStep = 6;
+
+ // If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
+ pMacAddr = Adapter->sLocalPara.ThisMacAddress;
+ pMacAddr2 = Adapter->sLocalPara.PermanentAddress;
+ hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
+ if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal
+ {
+ memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH );
+ } else {
+ // Set the user define MAC address
+ hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress );
+ }
- //get current antenna
- psLOCAL->bAntennaNo = hal_get_antenna_number( pHwData );
+ //get current antenna
+ psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+ WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
#endif
- hal_get_hw_radio_off( pHwData );
-
- // Disable the antenna diversity.
- //PLMESetAntennaDiversity( Adapter, 0 );
-
- // Waiting for HAL setting OK
- while( !hal_idle( pHwData ) )
- OS_SLEEP(10000);
-
- MTO_Init(Adapter);
+ hal_get_hw_radio_off( pHwData );
- HwRadioOff = hal_get_hw_radio_off( pHwData );
- if (HwRadioOff)
- psLOCAL->RadioOffStatus.boHwRadioOff = TRUE;
- else
- psLOCAL->RadioOffStatus.boHwRadioOff = FALSE;
+ // Waiting for HAL setting OK
+ while (!hal_idle(pHwData))
+ OS_SLEEP(10000);
- hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) );
+ MTO_Init(Adapter);
- if( TS_RUNNING_IN_TESTSTA_MODE )
- { TS_STARTUP( Adapter ); }
- else
- {
- K_MSG sSmeMsg;
- sSmeMsg.wMsgType = SMEMSG_SCAN_REQ;
- sSmeMsg.pMsgPtr = NULL;
- SME_Entry(Adapter, &sSmeMsg);
+ HwRadioOff = hal_get_hw_radio_off( pHwData );
+ psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff;
- OS_SLEEP(1000000); //1 sec
- }
+ hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) );
- hal_driver_init_OK( pHwData ) = 1; // Notify hal that the driver is ready now.
- //set a tx power for reference.....
- sme_set_tx_power_level(Adapter, 12);
- return TRUE;
+ if (TS_RUNNING_IN_TESTSTA_MODE) {
+ TS_STARTUP( Adapter );
+ } else {
+ K_MSG sSmeMsg;
+ sSmeMsg.wMsgType = SMEMSG_SCAN_REQ;
+ sSmeMsg.pMsgPtr = NULL;
+ SME_Entry(Adapter, &sSmeMsg);
- }
- while(FALSE);
+ OS_SLEEP(1000000); //1 sec
+ }
- switch( InitStep )
- {
- // case 6: WbNdis51_destroy( Adapter );
- case 5: Roam_Halt( Adapter );
- case 4: MLME_Halt( Adapter );
- SCAN_Halt( Adapter );
- SME_Halt( Adapter );
- case 3: Mds_Destroy( Adapter );
- case 2:
- case 1: WBLINUX_Destroy( Adapter );
- hal_halt( pHwData, NULL );
- case 0: break;
- }
+ hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
+ //set a tx power for reference.....
+ sme_set_tx_power_level(Adapter, 12);
+ return TRUE;
+ }
+ while(FALSE);
+
+ switch( InitStep )
+ {
+ case 5: Roam_Halt( Adapter );
+ case 4: MLME_Halt( Adapter );
+ SCAN_Halt( Adapter );
+ SME_Halt( Adapter );
+ case 3: Mds_Destroy( Adapter );
+ case 2:
+ case 1: WBLINUX_Destroy( Adapter );
+ hal_halt( pHwData, NULL );
+ case 0: break;
+ }
- return FALSE;
+ return FALSE;
}
// 20060802
diff --git a/drivers/net/wireless/winbond/winbondport/wbndis_entry.c b/drivers/net/wireless/winbond/winbondport/wbndis_entry.c
index eb761d5..7cae451 100644
--- a/drivers/net/wireless/winbond/winbondport/wbndis_entry.c
+++ b/drivers/net/wireless/winbond/winbondport/wbndis_entry.c
@@ -1,1337 +1 @@
-//============================================================================
-// Copyright (c) 1996-2004 Winbond Electronic Corporation
-//
-// Module Name:
-// WB32.C
-//
-// Abstract:
-// NDIS driver.
-//
-// Author:
-// yyli0
-//============================================================================
-#include "os_common.h"
-
-//Debug information
-void DbgPrintfOID(NDIS_OID Oid);
-
-#ifdef NDIS50_MINIPORT
-ANSI_STRING g_String;
-char g_NicName[100];
-#endif
-//
-// List of supported OID for this driver.
-//
-static u32 WbWLanSupportedOids[] = {
- OID_GEN_SUPPORTED_LIST,
- OID_GEN_HARDWARE_STATUS,
- OID_GEN_MEDIA_SUPPORTED,
- OID_GEN_MEDIA_IN_USE,
- OID_GEN_MAXIMUM_LOOKAHEAD,
- OID_GEN_MAXIMUM_FRAME_SIZE,
- OID_GEN_MAXIMUM_TOTAL_SIZE,
- OID_GEN_MAC_OPTIONS,
- OID_GEN_MEDIA_CONNECT_STATUS,
- OID_GEN_MAXIMUM_SEND_PACKETS,
- OID_GEN_VENDOR_DRIVER_VERSION,
- OID_GEN_PROTOCOL_OPTIONS,
- OID_GEN_LINK_SPEED,
- OID_GEN_TRANSMIT_BUFFER_SPACE,
- OID_GEN_RECEIVE_BUFFER_SPACE,
- OID_GEN_TRANSMIT_BLOCK_SIZE,
- OID_GEN_RECEIVE_BLOCK_SIZE,
- OID_GEN_VENDOR_DESCRIPTION,
- OID_GEN_VENDOR_ID,
- OID_GEN_DRIVER_VERSION,
- OID_GEN_CURRENT_PACKET_FILTER,
- OID_GEN_CURRENT_LOOKAHEAD,
- OID_GEN_XMIT_OK,
- OID_GEN_RCV_OK,
- OID_GEN_XMIT_ERROR,
- OID_GEN_RCV_ERROR,
- OID_GEN_RCV_NO_BUFFER,
- OID_802_3_PERMANENT_ADDRESS,
- OID_802_3_CURRENT_ADDRESS,
- OID_802_3_MULTICAST_LIST,
- OID_802_3_MAXIMUM_LIST_SIZE,
- OID_802_3_XMIT_ONE_COLLISION,
- OID_802_3_XMIT_MORE_COLLISIONS,
- OID_802_11_BSSID,
- OID_802_11_SSID,
- OID_802_11_NETWORK_TYPES_SUPPORTED,
- OID_802_11_NETWORK_TYPE_IN_USE,
- OID_802_11_RSSI,
- OID_802_11_INFRASTRUCTURE_MODE,
- OID_802_11_FRAGMENTATION_THRESHOLD,
- OID_802_11_RTS_THRESHOLD,
- OID_802_11_SUPPORTED_RATES,
- OID_802_11_CONFIGURATION,
- OID_802_11_BSSID_LIST,
- OID_802_11_AUTHENTICATION_MODE,
- OID_802_11_ASSOCIATION_INFORMATION,
- OID_802_11_ENCRYPTION_STATUS,
- OID_802_11_ADD_WEP,
- OID_802_11_REMOVE_WEP,
- OID_802_11_DISASSOCIATE,
- OID_802_11_BSSID_LIST_SCAN,
- OID_802_11_RELOAD_DEFAULTS,
- OID_802_11_ADD_KEY,
- OID_802_11_REMOVE_KEY,
- OID_802_11_TEST,
- OID_802_11_DESIRED_RATES,//added by ws 09/01/04
- OID_802_11_POWER_MODE,
-#ifdef _WPA2_
- OID_802_11_CAPABILITY,
- OID_802_11_PMKID,
-#endif
- OID_802_11_CUST_LINK_QUALITY,
- OID_802_11_CUST_HW_VERSION,
- OID_802_11_CUST_DRV_VERSION,
- OID_802_11_CUST_PREAMBLE_TYPE, //added by ws 09/01/0
- OID_802_11_CUST_DRV_NAME, //define an OID which wwu should query
- OID_802_11_CUST_ENCRYPTION_STATUS,//added by ws 02/15/04
-#ifdef WB_CE // 20051230.4 add for power event
- OID_PNP_CAPABILITIES,
- OID_PNP_QUERY_POWER,
- OID_PNP_SET_POWER,
-#endif
- OID_GEN_PHYSICAL_MEDIUM // For PLT Product Line Test
- };
-
-//============= The following global variable ========================
-// Handle for referring to the wrapper for the NDIS
-NDIS_HANDLE NdisWrapperHandle = NULL;
-NDIS_HANDLE NdisDeviceHandle[MAX_ADAPTER_COUNT] = { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL };
-void* pAdapterContext[MAX_ADAPTER_COUNT] = { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL };
-s32 AdapterCounter = 0; // 20060703 Add
-s32 DriverInitializing = 0;
-
-
-//============================================================================
-// DriverEntry
-//
-// Routine Description:
-//
-// This is the primary initialization routine for the NIC miniport driver.
-// It is simply responsible for the intializing the wrapper and registering
-// the Miniport driver. It then calls a system and architecture specific
-// routine that will initialize and register each adapter.
-//
-// Arguments:
-// DriverObject - Pointer to driver object created by the system.
-// RegistryPath - Path to the parameters for this driver in the registry.
-//
-// Return Value:
-// STATUS_SUCCESS
-// STATUS_UNSUCCESSFUL
-//============================================================================
-NTSTATUS
-DriverEntry( PDRIVER_OBJECT DriverObject,
- PUNICODE_STRING RegistryPath)
-{
- NDIS_MINIPORT_CHARACTERISTICS WBWLan; // Miniport characteristics struc.
- NDIS_STATUS Status; // Receives the status of the
- // NdisMRegisterMiniport operation.
-
-#ifdef NDIS50_MINIPORT
- {
-
- ANSI_STRING * GLOBAL_String=&g_String;
- NTSTATUS status;
- RTL_QUERY_REGISTRY_TABLE paramTable[2];
- UNICODE_STRING ParameterValue;
- PUNICODE_STRING pNicName;
- WCHAR temp[200];
-
- NdisZeroMemory(&g_String,sizeof(ANSI_STRING));
- NdisZeroMemory(g_NicName,100);
- g_String.Buffer = g_NicName;
- g_String.Length = 0;
- g_String.MaximumLength = 100;
- NdisZeroMemory((char*)temp,400);
- NdisMoveMemory(temp,L"\\REGISTRY\\MACHINE\\",36);
- NdisMoveMemory((char*)temp+36,RegistryPath->Buffer,RegistryPath->Length*2);
- temp[18+RegistryPath->Length] = UNICODE_NULL;
-
- RtlZeroMemory(paramTable, sizeof(paramTable));
- NdisInitUnicodeString(&ParameterValue, L"1111111111222222222233333333334444444444455555555556666666666");
-
- paramTable[0].Flags = RTL_QUERY_REGISTRY_DIRECT;
- paramTable[0].Name = L"DriverDesc";
- paramTable[0].EntryContext = &ParameterValue;
- paramTable[0].DefaultType = REG_SZ;
- paramTable[0].DefaultData = L"";
- paramTable[0].DefaultLength = 0;
- status =RtlQueryRegistryValues(RTL_REGISTRY_ABSOLUTE ,
- temp,
-// L"\\REGISTRY\\MACHINE\\SYSTEM\\CURRENTCONTROLSET\\SERVICES\\CLASS\\NET\\0001",
- ¶mTable[0],
- NULL,
- NULL);
- if(status != STATUS_SUCCESS)
- {
- DbgPrint("RtlQueryRegistryValues FAILED status=%x /n",status);
- }
-
- if((STATUS_SUCCESS == status) && (ParameterValue.Buffer != NULL))
- {
- if(ParameterValue.MaximumLength >= (ParameterValue.Length + sizeof(WCHAR)))
- {
- (ParameterValue.Buffer)[ParameterValue.Length / sizeof(WCHAR)] = UNICODE_NULL;
-// RtlUnicodeStringToAnsiString(&g_String,&ParameterValue,FALSE);
- g_String.Length = (ParameterValue.Length+1);
- NdisMoveMemory(g_NicName,(char*)(ParameterValue.Buffer),(ParameterValue.Length+1));
- DbgPrint("g_NicName%s/n",g_NicName);
- }
- else
- {
- ExFreePool(ParameterValue.Buffer);
- ParameterValue.Length = 0;
- ParameterValue.MaximumLength = 0;
- ParameterValue.Buffer = 0;
- status = STATUS_UNSUCCESSFUL;
- }
- }
-
- }
-#endif
-
- //===========================
- // Initialize the wrapper.
- //===========================
- NdisMInitializeWrapper(
- &NdisWrapperHandle,
- DriverObject,
- RegistryPath,
- NULL
- );
-
- NdisZeroMemory(&WBWLan, sizeof(WBWLan));
-
- //========================================================
- // Initialize the Miniport characteristics for the call to
- // NdisMRegisterMiniport.
- //========================================================
- WBWLan.MajorNdisVersion = WB32_NDIS_MAJOR_VERSION;
- WBWLan.MinorNdisVersion = WB32_NDIS_MINOR_VERSION;
- WBWLan.InitializeHandler = WbWLanInitialize;
- WBWLan.HaltHandler = WbWLanHalt;
- WBWLan.ResetHandler = WbWLanReset;
- WBWLan.SetInformationHandler = WbWLanSetInformation;
- WBWLan.QueryInformationHandler = WbWLanQueryInformation;
- WBWLan.SendPacketsHandler = WBNDIS_SendPackets;
-
-#ifdef NDIS51_MINIPORT
-// WBWLan.CancelSendPacketsHandler =
- WBWLan.PnPEventNotifyHandler = WBNDIS_PnPNotify;
-#endif
-
- Status = NdisMRegisterMiniport( NdisWrapperHandle, &WBWLan, sizeof(WBWLan) );
- if( Status == NDIS_STATUS_SUCCESS )
- return STATUS_SUCCESS;
-
- NdisTerminateWrapper( NdisWrapperHandle, NULL );
- return STATUS_UNSUCCESSFUL;
-}
-
-//==========================================================================
-// Wb32ResetCounter
-//==========================================================================
-void Wb32ResetCounter(PWB32_ADAPTER Adapter)
-{
- Adapter->sLocalPara._NumTxMSDU = 0;
- Adapter->sLocalPara._NumRxMSDU = 0;
- Adapter->sLocalPara._dot11WEPExcludedCount = 0;
- Adapter->sLocalPara._dot11WEPUndecryptableCount = 0;
- Adapter->sLocalPara._dot11FrameDuplicateCount = 0;
-
- hal_reset_counter(&Adapter->sHwData);
-}
-
-//=========================================================================
-//
-// WbWLanInitialize --
-//
-// Routine Description:
-// WbWLanInitialize starts an adapter and registers resources with the
-// wrapper.
-//
-// Arguments:
-// OpenErrorStatus - Extra status bytes for opening token ring
-// adapters.
-// SelectedMediumIndex - Index of the media type chosen by the driver.
-// MediumArray - Array of media types for the driver to chose
-// from.
-// MediumArraySize - Number of entries in the array.
-// MiniportAdapterHandle - Handle for passing to the wrapper when
-// referring to this adapter.
-// ConfigurationHandle - A handle to pass to NdisOpenConfiguration.
-//
-// Return Value:
-// NDIS_STATUS_SUCCESS
-// NDIS_STATUS_PENDING ???
-//=========================================================================
-extern
-NDIS_STATUS WbWLanInitialize( PNDIS_STATUS OpenErrorStatus,
- PUINT SelectedMediumIndex,
- PNDIS_MEDIUM MediumArray,
- u32 MediumArraySize,
- NDIS_HANDLE MiniportAdapterHandle,
- NDIS_HANDLE ConfigurationHandle)
-{
- u32 i, IndexTmp;
- NDIS_STATUS Status = NDIS_STATUS_FAILURE;
- PWB32_ADAPTER Adapter = NULL; // Pointer to the newly allocated adapter.
- phw_data_t pHwData;
- PUCHAR pMacAddr, pMacAddr2;
- u32 InitStep = 0, ltime;
- u8 EEPROM_region;
- u8 HwRadioOff;
-
- do
- {
- DriverInitializing = 1;
-
- // 20060703.2 Add for multipole Adapter IO control
- if( NdisInterlockedIncrement( &AdapterCounter ) > MAX_ADAPTER_COUNT )
- {
- Status = NDIS_STATUS_FAILURE;
- NdisInterlockedDecrement( &AdapterCounter );
- break;
- }
- IndexTmp = 0;
- for( i=0; i<MAX_ADAPTER_COUNT; i++ )
- {
- if( pAdapterContext[i] == NULL )
- {
- IndexTmp = i;
- break;
- }
- }
- if( i == MAX_ADAPTER_COUNT )
- break;// Somthing wrong
-
- //=======================================================
- // Search for the medium type (802.3) in the given array.
- //=======================================================
- for ( i = 0; i < MediumArraySize; i++)
- {
- if ( MediumArray[i] == NdisMedium802_3)
- break;
- }
- if ( i == MediumArraySize)
- {
- Status = NDIS_STATUS_UNSUPPORTED_MEDIA;// Unsupport media
- break;
- }
- *SelectedMediumIndex = i;
-
- //============================================================
- // Allocate memory for the adapter block now. and Tag = 'W32"
- //============================================================
- Status = NdisAllocateMemoryWithTag( (void* *)&Adapter, sizeof(WB32_ADAPTER), '53W' );
- if( Status != NDIS_STATUS_SUCCESS )
- break;
-
- // Clear out the adapter block, which sets all default values to FALSE, or NULL.
- NdisZeroMemory( Adapter, sizeof(WB32_ADAPTER) );
-
- // Setting NDIS Driver attribution
- NdisMSetAttributesEx( MiniportAdapterHandle,
- (NDIS_HANDLE) Adapter,
- 0,
- #ifdef NDIS51_MINIPORT
- NDIS_ATTRIBUTE_SURPRISE_REMOVE_OK |
- #endif
- NDIS_ATTRIBUTE_DESERIALIZE,
- NdisInterfaceInternal );//For USB device
-
- // Open the configuration space and Reading
- pHwData = &Adapter->sHwData;
- Status = WbReadNdisConfigration( Adapter, ConfigurationHandle );
- if( Status != NDIS_STATUS_SUCCESS )
- break;
-
-#ifdef WB_WIN
- // Register the device for the NDIS.
- if( NdisDeviceHandle[IndexTmp] == NULL )
- {
- Adapter->AdapterIndex = IndexTmp; // 20060703.2
- Status = WBRegisterMiniportDevice( Adapter );
- if( Status != NDIS_STATUS_SUCCESS )
- break;
- }
-#endif
-
- //
- // Initial each module and variable
- //
- if( !WBNDIS_Initial( Adapter, MiniportAdapterHandle ) )
- {
- Status = NDIS_STATUS_FAILURE;
- break;
- }
-
- // Initial Software variable
- Adapter->sLocalPara.ShutDowned = FALSE;
-// Adapter->sNdis.Wb32HardwareStatus = NdisHardwareStatusReady; // Hardware Ready to use
- //Adapter->sLocalPara.boAntennaDiversity = TRUE;
- //Adapter->sSmePara.Pmkid_Available_index=0;
-
- //added by ws for wep key error detection
- Adapter->sLocalPara.bWepKeyError= FALSE;//added by ws 02/02/04
- Adapter->sLocalPara.bToSelfPacketReceived = FALSE;
- Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
-
- // Initial USB hal
- InitStep = 1;
- if( !hal_init_hardware( pHwData, Adapter ) )
- {
- Status = NDIS_STATUS_FAILURE;
- break;
- }
-
- EEPROM_region = hal_get_region_from_EEPROM(&Adapter->sHwData);
- if (EEPROM_region != REGION_AUTO)
- psLOCAL->region = EEPROM_region;
- else
- {
- if (psLOCAL->region_INF != REGION_AUTO)
- psLOCAL->region = psLOCAL->region_INF;
- else
- psLOCAL->region = REGION_USA; //default setting
- }
-
- // Get Software setting flag from hal
- Adapter->sLocalPara.boAntennaDiversity = FALSE;
- if( hal_software_set( pHwData ) &0x00000001 )
- Adapter->sLocalPara.boAntennaDiversity = TRUE;
-
- //
- // For TS module
- //
- InitStep = 2;
- if( !TS_initial( Adapter ) )
- {
- Status = NDIS_STATUS_FAILURE;
- break;
- }
-
- // For MDS module
- InitStep = 3;
- Mds_initial( Adapter );
-
- //=======================================
- // Initialize the SME, SCAN, MLME, ROAM
- //=======================================
-// #ifdef NDIS51_MINIPORT
-// //For WinXP required
-// //vNetDisconnectInd(Adapter); should not be performed here according to the DDK 5048 help
-// #endif
- InitStep = 4;
- SME_Init(Adapter);
- Scan_Init(Adapter);
- if( !MLME_Init(Adapter) )
- {
- Status = NDIS_STATUS_FAILURE;
- break;
- }
-
- MLMESetExcludeUnencrypted(Adapter, FALSE);
- MLMESetMaxReceiveLifeTime(Adapter, DEFAULT_MAX_RECEIVE_TIME);
-
- InitStep = 5;
- Roam_Init(Adapter);
-
- InitStep = 6;
- WbNdis51_initial( Adapter );
-
- // If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
- pMacAddr = Adapter->sLocalPara.ThisMacAddress;
- pMacAddr2 = Adapter->sLocalPara.PermanentAddress;
- hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
-
- if( OS_MEMORY_COMPARE( pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH ) ) // Does register set value?
- {
- if( OS_MEMORY_COMPARE( pMacAddr2, "\xff\xff\xff\xff", 4 ) ) // Is EEPROM empty?
- {
- pMacAddr2[0] = 0x00;
- pMacAddr2[1] = 0x10;
- pMacAddr2[2] = 0x1d;
- pMacAddr2[3] = 0x35;
-
- OS_TIMER_GET_SYS_TIME( <ime );
- memcpy( pMacAddr2 + 4, <ime, 2 );
-
- // Set the virtual MAC address
- hal_set_ethernet_address( pHwData, pMacAddr2 );
- }
-
- memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH );
- }
- else
- // Set the user define MAC address
- hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress );
-
- //get current antenna
- psLOCAL->bAntennaNo = hal_get_antenna_number( pHwData );
- #ifdef _PE_STATE_DUMP_
- WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
- #endif
- hal_get_hw_radio_off( pHwData );
-
- // Disable the antenna diversity.
- //PLMESetAntennaDiversity( Adapter, 0 );
-
- // Waiting for HAL setting OK
- while( !hal_idle( pHwData ) )
- OS_SLEEP(10000);
-
- MTO_Init(Adapter);
-
- HwRadioOff = hal_get_hw_radio_off( pHwData );
- if (HwRadioOff)
- psLOCAL->RadioOffStatus.boHwRadioOff = TRUE;
- else
- psLOCAL->RadioOffStatus.boHwRadioOff = FALSE;
-
- hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) );
-
- // 20060703.4 Recording Adapter point. It must be here to represent the Adapter is initialized.
- pAdapterContext[IndexTmp] = Adapter;
-
- DriverInitializing = 0;
- hal_driver_init_OK( pHwData ) = 1; // Notify hal that the driver is ready now.
-
-// 20060717.3 Move here due to SCAN must after hal_driver_init_OK
-#ifdef WB_WIN
- if( TS_RUNNING_IN_TESTSTA_MODE )
- { TS_STARTUP( Adapter ); }
- else
- {
- K_MSG sSmeMsg;
- SCAN_REQ_PARA ScanReqPara;
-
- if( !psSCAN->BScanEnable )
- {
- sSmeMsg.wMsgType = SMEMSG_SCAN_REQ;
- sSmeMsg.pMsgPtr = NULL;
- SME_Entry(Adapter, &sSmeMsg);
- OS_SLEEP(2000000); //2 sec 20060620.4 increase to 2
- }
- else //scan only one channel to reduce the time of going to SCAN_READY state
- {
- memcpy(&ScanReqPara, psSCANREQ, sizeof(SCAN_REQ_PARA));
- ScanReqPara.sChannelList.Count=1; //only scan the first one channel
- sme_set_bssid_list_scan(Adapter, &ScanReqPara);
- OS_SLEEP(psSCAN->MaxChannelTime + 50000);
- //Must guarantee the scan is completed and restore the normal scan channels
- Scan_SetScanChanRange(Adapter, psSCANREQ);
- }
- }
-#endif
-
- #ifdef _PE_STATE_DUMP_
- WBDEBUG(("WbWlanInitialize OK\n"));
- #endif
-
- return NDIS_STATUS_SUCCESS;
-
- } while (FALSE);
-
- switch( InitStep )
- {
- case 6: WbNdis51_destroy( Adapter );
- case 5: Roam_Halt( Adapter );
- case 4: MLME_Halt( Adapter );
- SCAN_Halt( Adapter );
- SME_Halt( Adapter );
- case 3: Mds_Destroy( Adapter );
- case 2:
- case 1: WBNDIS_Destroy( Adapter );
- hal_halt( pHwData, NULL );
- case 0: break;
- }
-
-#ifdef WB_WIN
- // Deregister the device
- if( NdisDeviceHandle[IndexTmp] )
- NdisMDeregisterDevice( NdisDeviceHandle[IndexTmp] );
- NdisDeviceHandle[IndexTmp] = NULL;
-
- WbFreeString( Adapter->WbNdis.DeviceName );
- WbFreeString( Adapter->WbNdis.DeviceLinkUnicodeString );
-#endif
-
- // Free Adapter memory if necessary
- if( Adapter ) NdisFreeMemory( Adapter, sizeof(WB32_ADAPTER), 0 );
- pAdapterContext[IndexTmp] = NULL;
- DriverInitializing = 0;
- return Status;
-}
-
-//==========================================================================
-// WbReadNdisConfigration --
-//
-// Routine Description:
-// Reading the configration from registry. Some variable in structure
-// Adapter will be set if there are some setting in registry.
-// If not, the default value will be set.
-//
-// Arguments:
-// Adapter - The adapter structure.
-// ConfigurationHandle - Configuration handle
-//
-// Return Value:
-//
-//===========================================================================
-NDIS_STATUS WbReadNdisConfigration( PADAPTER Adapter, NDIS_HANDLE ConfigurationHandle )
-{
- NDIS_STATUS Status;
- NDIS_HANDLE ConfigHandle; // The handle for reading from the registry
- u32 Length; // The length of networkaddress
- void* NetAddress; // The network address the adapter should use instead of the default address in the serial EERPOM.
- PNDIS_CONFIGURATION_PARAMETER ReturnedValue; // The value read from the registry.
- u8 i;
-
- //
- // String names of all the parameters that will be read.
- //
- NDIS_STRING PLTStr = NDIS_STRING_CONST("PLT");
- NDIS_STRING RatePolicyStr = NDIS_STRING_CONST("RatePolicy");
- NDIS_STRING RegionStr = NDIS_STRING_CONST("Region");
- NDIS_STRING RTSThresholdStr = NDIS_STRING_CONST("RTSThreshold");
- NDIS_STRING TxFragThresholdStr = NDIS_STRING_CONST("TxFragThreshold");
- NDIS_STRING MTUsizeStr = NDIS_STRING_CONST("MTUsize");
- NDIS_STRING ChannelStr = NDIS_STRING_CONST("Channel");
- NDIS_STRING MaxTxRateStr = NDIS_STRING_CONST("MaxTxRate");
- NDIS_STRING PreambleStr = NDIS_STRING_CONST("Preamble");
- NDIS_STRING PHYStr = NDIS_STRING_CONST("PHY");
- NDIS_STRING ModulationTypeStr = NDIS_STRING_CONST("ModulationType");
- NDIS_STRING RadioModeStr = NDIS_STRING_CONST("Radio");
- NDIS_STRING PwrSaveModeStr = NDIS_STRING_CONST("PowerSave");
- NDIS_STRING BScanStr = NDIS_STRING_CONST("BScan");
-
- //=================================================
- // Open the configuration space and Reading
- //=================================================
- NdisOpenConfiguration( &Status, &ConfigHandle, ConfigurationHandle);
- if( Status != NDIS_STATUS_SUCCESS )
- {
- Status = NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION;
- return Status;
- }
-
- // Read the software-configurable network address that was stored in the
- // registry for a NIC when it was installed in the machine.
- NdisReadNetworkAddress( &Status, &NetAddress, &Length, ConfigHandle);
- if( (Length == ETH_LENGTH_OF_ADDRESS) && (Status == NDIS_STATUS_SUCCESS) )
- // Save the address that should be used.
- NdisMoveMemory( Adapter->sLocalPara.ThisMacAddress, NetAddress, ETH_LENGTH_OF_ADDRESS );
-
- // Read Product Line Test setting
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &PLTStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- TS_RUNNING_IN_TESTSTA_MODE = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read Rate Policy setting. reading fail means that decides from eeprom
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &RatePolicyStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- Adapter->sMtoPara.RatePolicy = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read Region setting
- Adapter->sLocalPara.region_INF = REGION_AUTO;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &RegionStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- Adapter->sLocalPara.region_INF = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read MaxTxRate
- Adapter->sLocalPara.TxRateMode = RATE_AUTO;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &MaxTxRateStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- Adapter->sLocalPara.TxRateMode = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read Operating mode setting
- psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &ModulationTypeStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- psLOCAL->bMacOperationMode = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read IBSS Channel setting
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &ChannelStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- {
- if (ReturnedValue->ParameterData.IntegerData == 0) //AUTO
- {
- Adapter->sLocalPara.IbssChanSetting.band = 0;
- Adapter->sLocalPara.IbssChanSetting.ChanNo = 0;
- }
- else
- {
- if (ReturnedValue->ParameterData.IntegerData >= 3000)
- Adapter->sLocalPara.IbssChanSetting.band = BAND_TYPE_OFDM_5;
- else
- Adapter->sLocalPara.IbssChanSetting.band = BAND_TYPE_OFDM_24;
- FreqToChannelNum(Adapter->sLocalPara.IbssChanSetting.band,
- &Adapter->sLocalPara.IbssChanSetting.ChanNo,
- ReturnedValue->ParameterData.IntegerData);
- }
- }
-
- // Read RTSThreshold setting
- Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &RTSThresholdStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- Adapter->Mds.TxRTSThreshold = (u16)ReturnedValue->ParameterData.IntegerData;
-
- // Read Tx Fragmentation Threshold setting
- Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &TxFragThresholdStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- Adapter->Mds.TxFragmentThreshold = (u16)ReturnedValue->ParameterData.IntegerData;
-
- // Read PHY type setting
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &PHYStr, NdisParameterInteger );
- i = (Status == NDIS_STATUS_SUCCESS) ? (u8)ReturnedValue->ParameterData.IntegerData : RF_WB_242_1;
- hal_set_phy_type( &Adapter->sHwData, i );
-
- // support the MTU size reading
- Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &MTUsizeStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- Adapter->sLocalPara.MTUsize = ReturnedValue->ParameterData.IntegerData;
-
- // Read Preamble mode setting
- psLOCAL->bPreambleMode = AUTO_MODE;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &PreambleStr, NdisParameterInteger );
- if( Status == NDIS_STATUS_SUCCESS )
- psLOCAL->bPreambleMode = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read Radio On/Off setting
- Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &RadioModeStr, NdisParameterInteger );
- ////Radio on : 0, Radio off : 1
- if( Status == NDIS_STATUS_SUCCESS )
- Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read power save mode setting
- psSME->bDesiredPowerSave = FALSE;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &PwrSaveModeStr, NdisParameterInteger );
- //0: PWR_ACTIVE, 1: PWR_SAVE
- if( Status == NDIS_STATUS_SUCCESS )
- psSME->bDesiredPowerSave = (u8)ReturnedValue->ParameterData.IntegerData;
-
- // Read Background scan setting
- psSCAN->BScanEnable = TRUE;
- NdisReadConfiguration( &Status, &ReturnedValue, ConfigHandle, &BScanStr, NdisParameterInteger );
- //0: Disable for HCT testing, 1: Enable
- if( Status == NDIS_STATUS_SUCCESS )
- psSCAN->BScanEnable = (u32)ReturnedValue->ParameterData.IntegerData;
-
- //=================================================
- // Close the configuration space. Reading Completed
- //=================================================
- NdisCloseConfiguration( ConfigHandle );
-
- return NDIS_STATUS_SUCCESS;
-}
-
-
-//=========================================================================
-// WbWLanHalt --
-//
-// Description:
-// Called when the NIC is removed and halts the NIC to deallocate the
-// resources.
-// In effect, MiniportHalt undoes everything that was done
-// by MiniportInitialize for a particular NIC.
-// MiniportHalt function should call reciprocal NdisXxx functions
-// in inverse order to the calls the driver made from MiniportInitialize
-//
-// Arguments:
-// MiniportAdapterContext - Context registered with the wrapper, really
-// a pointer to the adapter.
-//
-// Return:
-// None.
-//=========================================================================
-extern
-void WbWLanHalt( NDIS_HANDLE MiniportAdapterContext)
-{
- PWB32_ADAPTER Adapter = (PWB32_ADAPTER) MiniportAdapterContext;
- phw_data_t pHwData = &Adapter->sHwData;
- u32 IndexTmp = Adapter->AdapterIndex;
-
- #ifdef _PE_STATE_DUMP_
- WBDEBUG(("[%d]WbWlanHalt\n",IndexTmp));
- #endif
-
- // 20060712.6 move here is better for disable Dispatch operation
- #ifdef WB_WIN
- if( NdisDeviceHandle[IndexTmp] )
- NdisMDeregisterDevice( NdisDeviceHandle[IndexTmp] );
- NdisDeviceHandle[IndexTmp] = NULL;
-
- WbFreeString( Adapter->WbNdis.DeviceName );
- WbFreeString( Adapter->WbNdis.DeviceLinkUnicodeString );
- #endif
-
- // 20060712.1 Add
- pHwData->SurpriseRemove = 1;
- OS_SET_SHUTDOWN( Adapter ); // 20060421.1 Add
- OS_SLEEP(100000); // Wait for awhile. Must great than delay in callback_scheduler
- while( hal_detect_error( pHwData ) )
- OS_SLEEP(50000);
-
- // Halt procedure start..
- hal_surprise_remove( pHwData );
- Adapter->sLocalPara.ShutDowned = TRUE;
- WbNdis51_destroy( Adapter );
-
- Mds_Destroy( Adapter );
-
- // Halt
- Roam_Halt(Adapter);
- SCAN_Halt(Adapter);
- MLME_Halt(Adapter);
- SME_Halt(Adapter);
-
- // For Ts module unload
- TS_destroy( Adapter );
- // Turn off Rx and Tx hardware ability
- hal_stop( pHwData );
-
- // Destroy the NDIS module
- WBNDIS_Destroy( Adapter );
- // Halt the HAL
- hal_halt( pHwData, NULL );
-
- // Free up the device context
- NdisFreeMemory(Adapter, sizeof(WB32_ADAPTER), 0);
- pAdapterContext[IndexTmp] = NULL; // 20051228 move here
- NdisInterlockedDecrement( &AdapterCounter );
-}
-
-//===========================================================================
-// WbWLanReset --
-//
-// Routine Description:
-// The WBWLanReset request instructs the miniport to issue a hardware reset
-// to the network adapter. The driver also resets its software state. See
-// the description of miniportMReset for a detailed description.
-//
-// Arguments:
-// AddressingReset - Does the adapter need reload to the address.
-// MiniportAdapterContext - Pointer to the adapter structure.
-//
-// Return Value:
-// The function value is the status of the operation.
-//============================================================================
-NDIS_STATUS
-WbWLanReset( PBOOLEAN AddressingReset, NDIS_HANDLE MiniportAdapterContext )
-{
- return NDIS_STATUS_SUCCESS;
-}
-
-//==========================================================================
-// WbWLanQueryInformation --
-//
-// Routine Description:
-// The WBWLanQueryInformation process a Query request for NDIS_OIDs that
-// are specific about the Driver.
-//
-// Arguments:
-// MiniportAdapterContext - The pointer to the adapter.
-// Oid - The NDIS_OID to process.
-// InformationBuffer - Points to a buffer in which MiniportQuery-
-// Information should return the OID-specific
-// information.
-// InformationBufferLength - Specifies the number of bytes at Information-
-// Buffer.
-// BytesWritten - Points to a variable that MiniportQuery-
-// Information sets to the number of bytes it is
-// returning at InformationBuffer.
-// BytesNeeded - If there is not enough room in the information
-// buffer then this will contain the number of
-// bytes needed to complete the request.
-//
-// Return Value:
-// The function value is the status of the operation.
-//===========================================================================
-NDIS_STATUS
-WbWLanQueryInformation( NDIS_HANDLE MiniportAdapterContext,
- NDIS_OID Oid,
- void* InformationBuffer,
- u32 InformationBufferLength,
- PULONG BytesWritten,
- PULONG BytesNeeded)
-{
-
- PWB32_ADAPTER Adapter = (PWB32_ADAPTER) MiniportAdapterContext;
- PUCHAR InfoBuffer = (PUCHAR) InformationBuffer;
- NDIS_STATUS StatusToReturn = NDIS_STATUS_SUCCESS;
- NDIS_HARDWARE_STATUS HardwareStatus;
- NDIS_MEDIUM Medium = NdisMedium802_3;
- u64 GenericULong64;//901018
- u32 GenericULong;
- u16 GenericUShort;
- u8 GenericArray[6];
- u32 MoveBytes = sizeof(u32);
- void* MoveSource = (void*)(&GenericULong);
-#ifdef WB_CE
- NDIS_PNP_CAPABILITIES ndis_pnp_capablities;
-#endif
-
-// 20060706.1 Remove for safety
- if( Oid & 0x800000 )
- {
- Oid &= ~0x800000;
- return WbWLanSetInformation( MiniportAdapterContext,
- Oid,
- InformationBuffer,
- InformationBufferLength,
- BytesWritten,
- BytesNeeded );
- }
-
- //-------------------------------------------------------------------------------------
- // Make sure that int is 4 bytes. Else GenericULong must change to something of size 4.
- //-------------------------------------------------------------------------------------
- *BytesWritten = 0;
- *BytesNeeded = 0;
-
- #ifdef _PE_OID_DUMP_
- WBDEBUG(("Query "));
- DbgPrintfOID(Oid);
- #endif
-
- //============================================
- // Switch on request type
- //============================================
- switch (Oid) {
-#ifdef WB_CE //20051230.4 add
- case OID_PNP_QUERY_POWER:
- break;
- case OID_PNP_CAPABILITIES:
- ndis_pnp_capablities.WakeUpCapabilities.MinMagicPacketWakeUp = NdisDeviceStateD0;
- ndis_pnp_capablities.WakeUpCapabilities.MinPatternWakeUp = NdisDeviceStateD0;
- ndis_pnp_capablities.WakeUpCapabilities.MinLinkChangeWakeUp = NdisDeviceStateD0;
- MoveSource = (void*)&ndis_pnp_capablities;
- MoveBytes = sizeof(ndis_pnp_capablities);
- break;
-#endif
- case OID_GEN_CURRENT_PACKET_FILTER:
- GenericULong = Adapter->Mds.PacketFilter;
- break;
- case OID_GEN_MAC_OPTIONS:
- GenericULong = (u32)(NDIS_MAC_OPTION_TRANSFERS_NOT_PEND |
- NDIS_MAC_OPTION_COPY_LOOKAHEAD_DATA |
- NDIS_MAC_OPTION_NO_LOOPBACK);
- break;
- case OID_GEN_SUPPORTED_LIST:
- MoveSource = (void*)WbWLanSupportedOids;
- MoveBytes = sizeof(WbWLanSupportedOids);
- break;
- case OID_GEN_HARDWARE_STATUS:
- HardwareStatus = NdisHardwareStatusReady;
- MoveSource = (void*)(&HardwareStatus);
- MoveBytes = sizeof(NDIS_HARDWARE_STATUS);
- break;
- case OID_GEN_MEDIA_SUPPORTED:
- case OID_GEN_MEDIA_IN_USE:
- MoveSource = (void*)&Medium;
- MoveBytes = sizeof(NDIS_MEDIUM);
- break;
- case OID_GEN_MEDIA_CONNECT_STATUS:
- GenericULong = NdisMediaStateConnected;
- if( Adapter->WbNdis.connect_status == NDIS_STATUS_MEDIA_DISCONNECT )
- GenericULong = NdisMediaStateDisconnected;
- break;
- case OID_GEN_MAXIMUM_SEND_PACKETS:
- GenericULong = 1;
- break;
- case OID_GEN_VENDOR_DRIVER_VERSION:
- GenericULong = ( (u32)WB32_DRIVER_MAJOR_VERSION << 16) | WB32_DRIVER_MINOR_VERSION;
- if( Adapter->WbNdis.DisconnectIndicate == 0 )
- {
- OS_CONNECT_STATUS_INDICATE( Adapter, OS_DISCONNECTED );
- Adapter->WbNdis.DisconnectIndicate = 1;
- }
- break;
- case OID_GEN_MAXIMUM_LOOKAHEAD:
- case OID_GEN_CURRENT_LOOKAHEAD:
- GenericULong = Adapter->sLocalPara.MTUsize - ETHERNET_HEADER_SIZE;
- break;
- case OID_GEN_MAXIMUM_FRAME_SIZE:
- GenericULong = Adapter->sLocalPara.MTUsize - ETHERNET_HEADER_SIZE;
- break;
- case OID_GEN_LINK_SPEED:
- GenericULong = Adapter->WbNdis.TxRateShowResult * 5000;
- break;
- case OID_GEN_TRANSMIT_BUFFER_SPACE:
- GenericULong = ETHERNET_TX_DESCRIPTORS * MAX_USB_TX_BUFFER;
- break;
- case OID_GEN_RECEIVE_BUFFER_SPACE:
- GenericULong = ETHERNET_RX_DESCRIPTORS * MAX_USB_RX_BUFFER;
- break;
- case OID_GEN_MAXIMUM_TOTAL_SIZE:
- case OID_GEN_TRANSMIT_BLOCK_SIZE:
- case OID_GEN_RECEIVE_BLOCK_SIZE:
- GenericULong = Adapter->sLocalPara.MTUsize;
- break;
- case OID_GEN_VENDOR_ID:
- NdisMoveMemory( (void*)&GenericULong, (PUCHAR)(&Adapter->sLocalPara.PermanentAddress), 3 );
- GenericULong &= 0x00FFFFFF;
- break;
- case OID_GEN_VENDOR_DESCRIPTION:
- MoveSource = (void*)"IS89C35 USB20 802.11bg Wireless LAN Adapter Driver";
- MoveBytes = 52;
- break;
- case OID_GEN_DRIVER_VERSION:
- GenericUShort = ((u16)WB32_NDIS_MAJOR_VERSION << 8) | WB32_NDIS_MINOR_VERSION;
- MoveSource = (void*)&GenericUShort;
- MoveBytes = sizeof(GenericUShort);
- break;
- case OID_802_3_PERMANENT_ADDRESS:
- NdisMoveMemory( (PCHAR)GenericArray, Adapter->sLocalPara.PermanentAddress, ETH_LENGTH_OF_ADDRESS );
- MoveSource = (void*)GenericArray;
- MoveBytes = ETH_LENGTH_OF_ADDRESS;
- break;
- case OID_802_3_CURRENT_ADDRESS:
- NdisMoveMemory( (PCHAR)GenericArray, Adapter->sLocalPara.ThisMacAddress, ETH_LENGTH_OF_ADDRESS );
- MoveSource = (void*)GenericArray;
- MoveBytes = ETH_LENGTH_OF_ADDRESS;
- break;
- case OID_802_3_MAXIMUM_LIST_SIZE:
- GenericULong = 32;
- break;
- case OID_GEN_XMIT_OK:
- GenericULong64 = Adapter->sLocalPara.GS_XMIT_OK;
- MoveSource = (void*) &GenericULong64;
- *BytesNeeded = sizeof(u64);
- if( (InformationBufferLength == 0) || InformationBufferLength >= sizeof(u64) )
- {
- MoveBytes = sizeof(u64);
- break;
- }
- break;
- case OID_GEN_RCV_OK:
- GenericULong64 = Adapter->sLocalPara.GS_RCV_OK;
- MoveSource = (void*) &GenericULong64;
- *BytesNeeded = sizeof(u64);
- if ((InformationBufferLength == 0) || InformationBufferLength >= sizeof(u64)) {
- MoveBytes = sizeof(u64);
- break;
- }
- break;
- case OID_GEN_RCV_ERROR:
- GenericULong = Adapter->sLocalPara.GS_RCV_ERROR;
- break;
- case OID_GEN_XMIT_ERROR:
- GenericULong = Adapter->sLocalPara.GS_XMIT_ERROR;
- break;
- case OID_GEN_RCV_NO_BUFFER:
- GenericULong = Adapter->sLocalPara.GS_RCV_NO_BUFFER;
- break;
- case OID_802_3_XMIT_ONE_COLLISION:
- GenericULong = Adapter->sLocalPara.GS_XMIT_ONE_COLLISION;
- break;
- case OID_802_3_XMIT_MORE_COLLISIONS:
- GenericULong = Adapter->sLocalPara.GS_XMIT_MORE_COLLISIONS;
- break;
- default:
- StatusToReturn = WB_NDIS_STATUS_NOT_SUPPORTED;
- break;
- }
-
- if( StatusToReturn == WB_NDIS_STATUS_NOT_SUPPORTED )
- {
- MoveSource = InfoBuffer;
- StatusToReturn = Ndis51QueryInformation( Adapter,
- Oid,
- InformationBuffer,
- InformationBufferLength,
- &MoveBytes);
- }
-
- if( StatusToReturn == NDIS_STATUS_SUCCESS )
- {
- if( MoveBytes > InformationBufferLength )
- {
- //------- Not enough room in InformationBuffer. Punt
- *BytesNeeded = MoveBytes;
- StatusToReturn = NDIS_STATUS_INVALID_LENGTH;
- }
- else
- {
- //----------- Store result.
- NdisMoveMemory(InfoBuffer, MoveSource, MoveBytes);
- *BytesWritten = MoveBytes;
- }
- }
-
- return StatusToReturn;
-}
-
-//==========================================================================
-// WbWLanSetInformation --
-//
-// Routine Description:
-// Handles a set operation for a single OID.
-//
-// Arguments:
-// MiniportAdapterContext - Context registered with the wrapper, really
-// a pointer to the adapter.
-// Oid - The OID of the set operation.
-// InformationBuffer - Holds the data to be set.
-// InformationBufferLength - The number of bytes at InformationBuffer.
-// BytesRead - If the call is successful, returns the number
-// of bytes read from InformationBuffer.
-// BytesNeeded - If there is not enough data in InformationBuffer
-// to satisfy the OID, returns the amount of
-// storage needed.
-//
-// Return Value:
-// NDIS_STATUS_SUCCESS
-// NDIS_STATUS_PENDING
-// NDIS_STATUS_INVALID_LENGTH
-// NDIS_STATUS_INVALID_OID
-//==========================================================================
-
-NDIS_STATUS
-WbWLanSetInformation( NDIS_HANDLE MiniportAdapterContext,
- NDIS_OID Oid,
- void* InformationBuffer,
- u32 InformationBufferLength,
- PULONG BytesRead,
- PULONG BytesNeeded)
-{
- PWB32_ADAPTER Adapter = (PWB32_ADAPTER) MiniportAdapterContext;
- u32 BytesLeft = InformationBufferLength;
- PUCHAR InfoBuffer = (PUCHAR)(InformationBuffer);
- NDIS_STATUS StatusToReturn;
- u32 ltmp;
- u8 ctmp;
-
-
- //--------------------------------------------
- // Get Oid and Length of request
- //--------------------------------------------
-
- #ifdef _PE_OID_DUMP_
- WBDEBUG(("Setting "));
- DbgPrintfOID(Oid);
- #endif
-
-
- StatusToReturn = NDIS_STATUS_SUCCESS;
- *BytesRead = InformationBufferLength;
- *BytesNeeded = 0;
-
-
- switch (Oid)
- {
-#ifdef WB_CE
- case OID_PNP_SET_POWER:
- hal_system_power_change( &Adapter->sHwData, *(PULONG)InfoBuffer ); // 20051230.4 0=D0 1=D1 ..
- break;
-#endif
- case OID_802_3_MULTICAST_LIST:
-
- // Verify length
- if( (InformationBufferLength % ETH_LENGTH_OF_ADDRESS) != 0 )
- {
- StatusToReturn = NDIS_STATUS_INVALID_LENGTH;
- break;
- }
-
- // Get the number of the list
- Adapter->Mds.MulticastListNo = InformationBufferLength / ETH_LENGTH_OF_ADDRESS;
-
- // Set the new list on the adapter.
- NdisMoveMemory( (PUCHAR)(Adapter->Mds.MulticastAddressesArray), InfoBuffer, InformationBufferLength );
-
- hal_set_multicast_address( &Adapter->sHwData,
- (PUCHAR)Adapter->Mds.MulticastAddressesArray,
- (u8)Adapter->Mds.MulticastListNo );
- break;
-
- case OID_GEN_CURRENT_PACKET_FILTER:
-
- // Verify length
- if( InformationBufferLength != 4 )
- {
- StatusToReturn = NDIS_STATUS_INVALID_LENGTH;
- break;
- }
-
- NdisMoveMemory( <mp, InfoBuffer, 4 );
-
- // Verify bits
- if( ltmp & ~( NDIS_PACKET_TYPE_DIRECTED |
- NDIS_PACKET_TYPE_MULTICAST |
- NDIS_PACKET_TYPE_PROMISCUOUS |
- NDIS_PACKET_TYPE_BROADCAST ) )
- {
- StatusToReturn = WB_NDIS_STATUS_NOT_SUPPORTED;
- break;
- }
-
- ctmp = (ltmp & NDIS_PACKET_TYPE_BROADCAST) ? 1 : 0;
- hal_set_accept_broadcast( &Adapter->sHwData, ctmp );
-
- ctmp = (ltmp & NDIS_PACKET_TYPE_MULTICAST) ? 1 : 0;
- hal_set_accept_multicast( &Adapter->sHwData, ctmp );
-
- // Set the new value to the adapter.
- Adapter->Mds.PacketFilter = ltmp;
-
- break;
-
- case OID_GEN_CURRENT_LOOKAHEAD:
-
- // Verify length
- NdisMoveMemory( <mp, InfoBuffer, 4 );
- if( InformationBufferLength!=4 || ltmp>Adapter->sLocalPara.MTUsize )
- StatusToReturn = NDIS_STATUS_INVALID_LENGTH;
-
- break;
-
- default:
-
- StatusToReturn = WB_NDIS_STATUS_NOT_SUPPORTED;
- }
-
- if( StatusToReturn == WB_NDIS_STATUS_NOT_SUPPORTED )
- {
- StatusToReturn = Ndis51SetInformation( Adapter,
- Oid,
- InformationBuffer,
- InformationBufferLength,
- BytesNeeded);
-
- if( *BytesNeeded )
- StatusToReturn = NDIS_STATUS_INVALID_LENGTH;
- }
-
- if( StatusToReturn != NDIS_STATUS_SUCCESS && StatusToReturn != NDIS_STATUS_PENDING )
- *BytesRead = 0;
-
- return StatusToReturn;
-}
-
-
-// *************************************************************************************************************************
-#ifdef _PE_OID_DUMP_
-void DbgPrintfOID(NDIS_OID Oid)
-{
- //=======================
- // Print information
- //=======================
- switch (Oid) {
- //----------------- NDIS information ----------------
- case OID_GEN_MAC_OPTIONS:
- WBDEBUG(("OID_GEN_MAC_OPTIONS\n"));
- break;
- case OID_GEN_SUPPORTED_LIST:
- WBDEBUG(("OID_GEN_SUPPORTED_LIST\n"));
- break;
- case OID_GEN_MEDIA_SUPPORTED:
- WBDEBUG(("OID_GEN_MEDIA_SUPPORTED\n"));
- break;
- case OID_GEN_MEDIA_IN_USE:
- WBDEBUG(("OID_GEN_MEDIA_IN_USE\n"));
- break;
- case OID_GEN_MAXIMUM_SEND_PACKETS:
- WBDEBUG(("OID_GEN_MAXIMUM_SEND_PACKETS\n"));
- break;
- case OID_GEN_VENDOR_DRIVER_VERSION: // from version.h
- WBDEBUG(("OID_GEN_VENDOR_DRIVER_VERSION\n"));
- break;
- case OID_GEN_MAXIMUM_TOTAL_SIZE:
- WBDEBUG(("OID_GEN_MAXIMUM_TOTAL_SIZE\n"));
- break;
- case OID_GEN_TRANSMIT_BLOCK_SIZE:
- WBDEBUG(("OID_GEN_TRANSMIT_BLOCK_SIZE\n"));
- break;
- case OID_GEN_RECEIVE_BLOCK_SIZE:
- WBDEBUG(("OID_GEN_RECEIVE_BLOCK_SIZE\n"));
- break;
- case OID_GEN_MAXIMUM_LOOKAHEAD:
- WBDEBUG(("OID_GEN_MAXIMUM_LOOKAHEAD\n"));
- break;
- case OID_GEN_CURRENT_LOOKAHEAD:
- WBDEBUG(("OID_GEN_CURRENT_LOOKAHEAD\n"));
- break;
- case OID_GEN_MAXIMUM_FRAME_SIZE:
- WBDEBUG(("OID_GEN_MAXIMUM_FRAME_SIZE\n"));
- break;
- case OID_GEN_TRANSMIT_BUFFER_SPACE:
- WBDEBUG(("OID_GEN_TRANSMIT_BUFFER_SPACE\n"));
- break;
- case OID_GEN_RECEIVE_BUFFER_SPACE:
- WBDEBUG(("OID_GEN_RECEIVE_BUFFER_SPACE\n"));
- break;
- case OID_GEN_VENDOR_ID:
- WBDEBUG(("OID_GEN_VENDOR_ID\n"));
- break;
- case OID_GEN_VENDOR_DESCRIPTION:
- WBDEBUG(("OID_GEN_VENDOR_DESCRIPTION\n"));
- break;
- case OID_GEN_DRIVER_VERSION:
- WBDEBUG(("OID_GEN_DRIVER_VERSION\n"));
- break;
- // Hardware status --------------------------------------------------------------------//
- case OID_GEN_HARDWARE_STATUS:
- WBDEBUG(("OID_GEN_HARDWARE_STATUS\n"));
- break;
- case OID_GEN_LINK_SPEED:
- //WBDEBUG(("OID_GEN_LINK_SPEED\n"));
- break;
- case OID_GEN_MEDIA_CONNECT_STATUS:
- WBDEBUG(("OID_GEN_MEDIA_CONNECT_STATUS\n"));
- break;
- case OID_802_3_PERMANENT_ADDRESS:
- WBDEBUG(("OID_802_3_PERMANENT_ADDRESS\n"));
- break;
- case OID_802_3_CURRENT_ADDRESS:
- WBDEBUG(("OID_802_3_CURRENT_ADDRESS\n"));
- break;
- case OID_802_3_MAXIMUM_LIST_SIZE:
- WBDEBUG(("OID_802_3_MAXIMUM_LIST_SIZE\n"));
- break;
-
- // General Statistics ------------------------------------------------------------//
- case OID_GEN_XMIT_OK:
- //WBDEBUG(("OID_GEN_XMIT_OK\n"));
- break;
- case OID_GEN_RCV_OK:
- //WBDEBUG(("OID_GEN_RCV_OK\n"));
- break;
- case OID_GEN_RCV_ERROR:
- //WBDEBUG(("OID_GEN_RCV_ERROR\n"));
- break;
- case OID_GEN_XMIT_ERROR:
- //WBDEBUG(("OID_GEN_XMIT_ERROR\n"));
- break;
- case OID_GEN_RCV_NO_BUFFER:
- WBDEBUG(("OID_GEN_RCV_NO_BUFFER\n"));
- break;
- case OID_802_3_RCV_ERROR_ALIGNMENT:
- WBDEBUG(("OID_802_3_RCV_ERROR_ALIGNMENT\n"));
- break;
- case OID_802_3_XMIT_ONE_COLLISION:
- WBDEBUG(("OID_802_3_XMIT_ONE_COLLISION\n"));
- break;
- case OID_802_3_XMIT_MORE_COLLISIONS:
- WBDEBUG(("OID_802_3_XMIT_MORE_COLLISIONS\n"));
- break;
- default:
- //WBDEBUG(("NONE\n"));
- break;
- }
-}
-#endif // _PE_OID_DUMP_
-
-
-
+/* No windows code needed...? */
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists