lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1207829872.1514.3.camel@localhost>
Date:	Thu, 10 Apr 2008 14:17:52 +0200
From:	Kasper Sandberg <lkml@...anurb.dk>
To:	Francois Romieu <romieu@...zoreil.com>
Cc:	Andrew Morton <akpm@...ux-foundation.org>,
	LKML Mailinglist <linux-kernel@...r.kernel.org>,
	linux-acpi@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: Realtek 8111c weirdness problems, apic/msi, and normal bug

On Mon, 2008-04-07 at 06:09 +0200, Kasper Sandberg wrote:
> Hello.
> 
> I apologize, but it will have to wait a few days, as the fan on the
> graphics card just broke, and it overheats almost instantly.
> 
> I will post as soon as possible, sorry for the inconvenience.
> 
> On Sun, 2008-04-06 at 16:06 +0200, Francois Romieu wrote:
> > Andrew Morton <akpm@...ux-foundation.org> :
> > [...]
> > > > /proc/interrupts, dmesg, ethtool on .25 apic/nomsi?
> > 
> > Complete dmesg and lspci -vvxn for a start.

Okay, the box is up again, sorry for the delay..

hmm, is this dmesg cut off? (its right after booting, but maybe the
buffer isnt big enough?)

000 - 0xc0318df8   (2147 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3201.59 BogoMIPS
(lpj=1600795)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Celeron(R) CPU          420  @ 1.60GHz stepping 01
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
net_namespace: 152 bytes
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfb6c0, last bus=7
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/2916] at 0000:00:1f.0
hpet clockevent registered
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: 0xe4000000-0xe6ffffff
  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:06.0
  IO window: 9000-9fff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: a000-afff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
  IO window: b000-bfff
  MEM window: 0xe9100000-0xe91fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: c000-cfff
  MEM window: 0xe7000000-0xe7ffffff
  PREFETCH window: 0x00000000e9000000-0x00000000e90fffff
PCI: Bridge: 0000:00:1c.5
  IO window: d000-dfff
  MEM window: 0xe8000000-0xe8ffffff
  PREFETCH window: 0x00000000e9200000-0x00000000e92fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: 0xe9300000-0xe93fffff
  PREFETCH window: disabled.
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:01.0
PCI: Sharing IRQ 10 with 0000:00:06.0
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:00:1c.4
PCI: Sharing IRQ 10 with 0000:05:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Found IRQ 10 for device 0000:00:06.0
PCI: Sharing IRQ 10 with 0000:00:01.0
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:00:1c.4
PCI: Sharing IRQ 10 with 0000:05:00.0
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Found IRQ 10 for device 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:00:01.0
PCI: Sharing IRQ 10 with 0000:00:06.0
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1c.4
PCI: Sharing IRQ 10 with 0000:05:00.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: setting IRQ 15 as level-triggered
PCI: Found IRQ 15 for device 0000:00:1c.3
PCI: Sharing IRQ 15 with 0000:00:1d.1
PCI: Sharing IRQ 15 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Found IRQ 10 for device 0000:00:1c.4
PCI: Sharing IRQ 10 with 0000:00:01.0
PCI: Sharing IRQ 10 with 0000:00:06.0
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:05:00.0
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:1c.5
PCI: Sharing IRQ 11 with 0000:06:00.0
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
SGI XFS with ACLs, no debug enabled
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Driver 'sd' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
PCI: Found IRQ 15 for device 0000:00:1f.2
PCI: Sharing IRQ 15 with 0000:00:1d.1
Switched to high resolution mode on CPU 0
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA
mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum
part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@...9406000 port 0xe9406100 irq 217
ata2: SATA max UDMA/133 abar m2048@...9406000 port 0xe9406180 irq 217
ata3: SATA max UDMA/133 abar m2048@...9406000 port 0xe9406200 irq 217
ata4: SATA max UDMA/133 abar m2048@...9406000 port 0xe9406280 irq 217
ata5: SATA max UDMA/133 abar m2048@...9406000 port 0xe9406300 irq 217
ata6: SATA max UDMA/133 abar m2048@...9406000 port 0xe9406380 irq 217
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST3500320NS      SN04 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access     ATA      ST3500320NS      SN04 PQ: 0
ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:1a.7
PCI: Sharing IRQ 5 with 0000:00:1a.2
PCI: Sharing IRQ 5 with 0000:00:1d.2
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:07:06.0
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 5, io mem 0xe9405000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
PCI: setting IRQ 7 as level-triggered
PCI: Found IRQ 7 for device 0000:00:1d.7
PCI: Sharing IRQ 7 with 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xe9404000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 10 for device 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:05:00.0
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 10, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: setting IRQ 3 as level-triggered
PCI: Found IRQ 3 for device 0000:00:1a.1
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000e100
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 5 for device 0000:00:1a.2
PCI: Sharing IRQ 5 with 0000:00:1a.7
PCI: Sharing IRQ 5 with 0000:00:1d.2
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:07:06.0
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 5, io base 0x0000e200
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PCI: Found IRQ 7 for device 0000:00:1d.0
PCI: Sharing IRQ 7 with 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000e300
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PCI: Found IRQ 15 for device 0000:00:1d.1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 15, io base 0x0000e400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PCI: Found IRQ 5 for device 0000:00:1d.2
PCI: Sharing IRQ 5 with 0000:00:1a.2
PCI: Sharing IRQ 5 with 0000:00:1a.7
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:07:06.0
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e500
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
usb 8-2: new low speed USB device using uhci_hcd and address 2
usb 8-2: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on
usb-0000:00:1d.2-2
input: Logitech Logitech USB Keyboard as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on
usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
md: Autodetecting RAID arrays.
md: Scanned 6 and added 6 devices.
md: autorun ...
md: considering sdb3 ...
md:  adding sdb3 ...
md: sdb2 has different UUID to sdb3
md: sdb1 has different UUID to sdb3
md:  adding sda3 ...
md: sda2 has different UUID to sdb3
md: sda1 has different UUID to sdb3
md: created md2
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering sdb2 ...
md:  adding sdb2 ...
md: sdb1 has different UUID to sdb2
md:  adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md1
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
Filesystem "md1": Disabling barriers, not supported by the underlying
device
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 180k freed
PCI: setting IRQ 14 as level-triggered
PCI: Found IRQ 14 for device 0000:00:1b.0
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
r8169 Gigabit Ethernet driver 2.2LK loaded
PCI: Found IRQ 10 for device 0000:05:00.0
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Setting latency timer of device 0000:05:00.0 to 64
eth0: RTL8168c/8111c at 0xf887a000, 00:1d:7d:06:7b:39, XID 3c2000c0 IRQ
216
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
r8169 Gigabit Ethernet driver 2.2LK loaded
PCI: Found IRQ 11 for device 0000:06:00.0
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth1: RTL8168c/8111c at 0xf887c000, 00:1d:7d:06:75:d8, XID 3c2000c0 IRQ
215
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07
PST 2008
Filesystem "md1": Disabling barriers, not supported by the underlying
device
r8169: eth1: link down
r8169: eth0: link up
r8169: eth1: link down
r8169: eth0: link up
r8169: eth1: link up
r8169: eth1: link up
Filesystem "md0": Disabling barriers, not supported by the underlying
device
XFS mounting filesystem md0
Ending clean XFS mount for filesystem: md0


quadstation ~ # cat /proc/cmdline
root=/dev/md1 noapic


00:00.0 0600: 8086:29e0 (rev 01)
        Subsystem: 1458:5000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
00: 86 80 e0 29 06 00 90 20 01 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 50
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

00:01.0 0604: 8086:29e1 (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: e4000000-e6ffffff
        Prefetchable memory behind bridge:
00000000d0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: 1458:5000
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0100c  Data: 4139
        Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s,
Latency L0 <512ns, L1 <64us
                        ClockPM- Suprise- LLActRep- BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
                        Slot # 20, PowerLimit 75.000000; Interlock-
NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet
+ Interlock-
                        Changed: MRL- PresDet+ LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Kernel driver in use: pcieport-driver
00: 86 80 e1 29 07 04 10 00 01 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: 00 e4 f0 e6 01 d0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 08 00

00:06.0 0604: 8086:29e9 (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: 1458:5000
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0100c  Data: 4141
        Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #3, Speed 5GT/s, Width x16, ASPM L0s L1,
Latency L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep- BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
                        Slot #  0, PowerLimit 0.000000; Interlock-
NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Kernel driver in use: pcieport-driver
00: 86 80 e9 29 07 04 10 00 01 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 90 90 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 00 00

00:1a.0 0c03: 8086:2937 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 4: I/O ports at e000 [size=32]
        Capabilities: [50] PCIe advanced features <?>
        Kernel driver in use: uhci_hcd
00: 86 80 37 29 05 00 90 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00

00:1a.1 0c03: 8086:2938 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 3
        Region 4: I/O ports at e100 [size=32]
        Capabilities: [50] PCIe advanced features <?>
        Kernel driver in use: uhci_hcd
00: 86 80 38 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e1 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 02 00 00

00:1a.2 0c03: 8086:2939 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 5
        Region 4: I/O ports at e200 [size=32]
        Capabilities: [50] PCIe advanced features <?>
        Kernel driver in use: uhci_hcd
00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e2 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 03 00 00

00:1a.7 0c03: 8086:293c (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1458:5006
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 5
        Region 0: Memory at e9405000 (32-bit, non-prefetchable)
[size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ehci_hcd
00: 86 80 3c 29 06 00 90 02 02 20 03 0c 00 00 00 00
10: 00 50 40 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 06 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 03 00 00

00:1b.0 0403: 8086:293e (rev 02)
        Subsystem: 1458:a022
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 14
        Region 0: Memory at e9400000 (64-bit, non-prefetchable)
[size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated
Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel
00: 86 80 3e 29 06 00 10 00 02 00 03 04 08 00 00 00
10: 04 00 40 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 22 a0
30: 00 00 00 00 50 00 00 00 00 00 00 00 0e 01 00 00

00:1c.0 0604: 8086:2940 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000a000-0000afff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s,
Latency L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surpise+
                        Slot # 10, PowerLimit 10.000000; Interlock-
NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0100c  Data: 4149
        Capabilities: [90] Subsystem: 1458:5001
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport-driver
00: 86 80 40 29 07 04 10 00 02 00 04 06 08 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 a0 a0 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00

00:1c.3 0604: 8086:2946 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: e9100000-e91fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
                LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s,
Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surpise+
                        Slot # 13, PowerLimit 10.000000; Interlock-
NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet
+ Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0100c  Data: 4151
        Capabilities: [90] Subsystem: 1458:5001
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport-driver
00: 86 80 46 29 07 04 10 00 02 00 04 06 08 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 b0 b0 00 00
20: 10 e9 10 e9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0f 04 00 00

00:1c.4 0604: 8086:2948 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: e7000000-e7ffffff
        Prefetchable memory behind bridge:
00000000e9000000-00000000e90fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
                LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s,
Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surpise+
                        Slot # 14, PowerLimit 10.000000; Interlock-
NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet
+ Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0100c  Data: 4159
        Capabilities: [90] Subsystem: 1458:5001
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport-driver
00: 86 80 48 29 07 04 10 00 02 00 04 06 08 00 81 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 c0 c0 00 20
20: 00 e7 f0 e7 01 e9 01 e9 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00

00:1c.5 0604: 8086:294a (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: e8000000-e8ffffff
        Prefetchable memory behind bridge:
00000000e9200000-00000000e92fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
                LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s,
Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surpise+
                        Slot # 15, PowerLimit 10.000000; Interlock-
NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet
+ Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0100c  Data: 4161
        Capabilities: [90] Subsystem: 1458:5001
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport-driver
00: 86 80 4a 29 07 04 10 00 02 00 04 06 08 00 81 00
10: 00 00 00 00 00 00 00 00 00 06 06 00 d0 d0 00 00
20: 00 e8 f0 e8 21 e9 21 e9 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 00 00

00:1d.0 0c03: 8086:2934 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 7
        Region 4: I/O ports at e300 [size=32]
        Capabilities: [50] PCIe advanced features <?>
        Kernel driver in use: uhci_hcd
00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e3 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 00

00:1d.1 0c03: 8086:2935 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 15
        Region 4: I/O ports at e400 [size=32]
        Capabilities: [50] PCIe advanced features <?>
        Kernel driver in use: uhci_hcd
00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 02 00 00

00:1d.2 0c03: 8086:2936 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 5
        Region 4: I/O ports at e500 [size=32]
        Capabilities: [50] PCIe advanced features <?>
        Kernel driver in use: uhci_hcd
00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e5 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 03 00 00

00:1d.7 0c03: 8086:293a (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1458:5006
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 7
        Region 0: Memory at e9404000 (32-bit, non-prefetchable)
[size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ehci_hcd
00: 86 80 3a 29 06 00 90 02 02 20 03 0c 00 00 00 00
10: 00 40 40 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 06 50
30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 00

00:1e.0 0604: 8086:244e (rev 92) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: e9300000-e93fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: 1458:5000
00: 86 80 4e 24 07 00 10 00 92 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 07 07 20 f0 00 80 22
20: 30 e9 30 e9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00

00:1f.0 0601: 8086:2916 (rev 02)
        Subsystem: 1458:5001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
00: 86 80 16 29 07 01 10 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 01 50
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

00:1f.2 0106: 8086:2922 (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: 1458:b005
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 217
        Region 0: I/O ports at e600 [size=8]
        Region 1: I/O ports at e700 [size=4]
        Region 2: I/O ports at e800 [size=8]
        Region 3: I/O ports at e900 [size=4]
        Region 4: I/O ports at ea00 [size=32]
        Region 5: Memory at e9406000 (32-bit, non-prefetchable)
[size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/4 Enable+
                Address: fee0100c  Data: 4169
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA <?>
        Capabilities: [b0] PCIe advanced features <?>
        Kernel driver in use: ahci
00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00
10: 01 e6 00 00 01 e7 00 00 01 e8 00 00 01 e9 00 00
20: 01 ea 00 00 00 60 40 e9 00 00 00 00 58 14 05 b0
30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00

00:1f.3 0c05: 8086:2930 (rev 02)
        Subsystem: 1458:5001
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 5
        Region 0: Memory at e9407000 (64-bit, non-prefetchable)
[size=256]
        Region 4: I/O ports at 0500 [size=32]
00: 86 80 30 29 03 00 80 02 02 00 05 0c 00 00 00 00
10: 04 70 40 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 05 00 00 00 00 00 00 00 00 00 00 58 14 01 50
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00

01:00.0 0300: 10de:00f8 (rev a2) (prog-if 00 [VGA controller])
        Subsystem: 10de:01ff
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at e4000000 (32-bit, non-prefetchable)
[size=16M]
        Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 2: Memory at e5000000 (32-bit, non-prefetchable)
[size=16M]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <4us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s,
Latency L0 <2us, L1 <16us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: nvidia
        Kernel modules: nvidia
00: de 10 f8 00 07 00 10 00 a2 00 00 03 08 00 00 00
10: 00 00 00 e4 08 00 00 d0 00 00 00 e5 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 ff 01
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00

05:00.0 0200: 10ec:8168 (rev ff) (prog-if ff)
        !!! Unknown header type 7f
        Kernel driver in use: r8169
        Kernel modules: r8169
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

06:00.0 0200: 10ec:8168 (rev 02)
        Subsystem: 1458:e000
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 215
        Region 0: I/O ports at d000 [size=256]
        Region 2: Memory at e9210000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at e9200000 (64-bit, prefetchable) [size=64K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1
+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable+
                Address: 00000000fee0100c  Data: 4179
        Capabilities: [70] Express (v1) Endpoint, MSI 01
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <8us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
                        ClockPM+ Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data <?>
        Kernel driver in use: r8169
        Kernel modules: r8169
00: ec 10 68 81 07 04 10 00 02 00 00 02 08 00 00 00
10: 01 d0 00 00 00 00 00 00 0c 00 21 e9 00 00 00 00
20: 0c 00 20 e9 00 00 00 00 00 00 00 00 58 14 00 e0
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00

07:06.0 0c00: 104c:8024 (prog-if 10 [OHCI])
        Subsystem: 1458:1000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at e9304000 (32-bit, non-prefetchable)
[size=2K]
        Region 1: Memory at e9300000 (32-bit, non-prefetchable)
[size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1
+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 4c 10 24 80 06 00 10 02 00 10 00 0c 08 20 00 00
10: 00 40 30 e9 00 00 30 e9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 02 04


quadstation ~ # cat /proc/interrupts
           CPU0
  0:        273    XT-PIC-XT        timer
  1:          2    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  3:          0    XT-PIC-XT        uhci_hcd:usb4
  5:        680    XT-PIC-XT        ehci_hcd:usb1, uhci_hcd:usb5,
uhci_hcd:usb8
  7:          2    XT-PIC-XT        ehci_hcd:usb2, uhci_hcd:usb6
 10:          0    XT-PIC-XT        uhci_hcd:usb3
 12:        114    XT-PIC-XT        i8042
 14:        185    XT-PIC-XT        HDA Intel
 15:          0    XT-PIC-XT        uhci_hcd:usb7
215:        662   PCI-MSI-edge      eth1
217:       2453   PCI-MSI-edge      ahci
NMI:          0   Non-maskable interrupts
LOC:     557133   Local timer interrupts
TRM:          0   Thermal event interrupts
SPU:          0   Spurious interrupts
ERR:          0
MIS:          0



Yes, the kernel is tainted (for some reason gentoo/udev autoloads it..),
but not to worry, i have tested without it (before i even got it), and
its the exact same result, however, if you do not believe that, i shall
happily delete the module in question, and repost.

anything else you need?



> > 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ