Linux version 2.6.25-rc8-x86-latest.git (rafael@chimera) (gcc version 4.2.1 (SUSE Linux)) #24 SMP Sun Apr 13 18:27:52 CEST 2008 Command line: root=/dev/md1 vga=0x31a resume=/dev/sda2 debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 158) 0 entries of 256 used Entering add_active_range(0, 256, 524208) 1 entries of 256 used max_pfn_mapped = 1048576 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping DMI 2.3 present. ACPI: RSDP 000F9B60, 0014 (r0 ACPIAM) ACPI: RSDT 7FFB0000, 0030 (r1 A M I OEMRSDT 8000526 MSFT 97) ACPI: FACP 7FFB0200, 0084 (r2 A M I OEMFACP 8000526 MSFT 97) ACPI: DSDT 7FFB0400, 45A7 (r1 939M2 939M2120 120 INTL 2002026) ACPI: FACS 7FFC0000, 0040 ACPI: APIC 7FFB0390, 0068 (r1 A M I OEMAPIC 8000526 MSFT 97) ACPI: OEMB 7FFC0040, 0056 (r1 A M I AMI_OEM 8000526 MSFT 97) Entering add_active_range(0, 0, 158) 0 entries of 256 used Entering add_active_range(0, 256, 524208) 1 entries of 256 used early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-b36c6f] TEXT DATA BSS early res: 3 [378e2000-37fefaa5] RAMDISK early res: 4 [9ec00-fffff] BIOS reserved early res: 5 [8000-bfff] PGTABLE Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 158 0: 256 -> 524208 On node 0 totalpages: 524110 DMA zone: 56 pages used for memmap DMA zone: 2464 pages reserved DMA zone: 1478 pages, LIFO batch:0 DMA32 zone: 7110 pages used for memmap DMA32 zone: 513002 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 0, address 0xfec10000, GSI 24-39 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7f7c0000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 31152 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514480 Kernel command line: root=/dev/md1 vga=0x31a resume=/dev/sda2 debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2200.069 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 2688 bytes Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Node 0: aperture @ de000000 size 32 MB Aperture too small (32 MB) AGP bridge at 00:04:00 Aperture from AGP @ de000000 size 4096 MB (APSIZE 0) Aperture too small (0 MB) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 PM: Registered nosave memory: 0000000004000000 - 0000000008000000 Memory: 1981536k/2096832k available (2987k kernel code, 114252k reserved, 1658k data, 288k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 4404.13 BogoMIPS (lpj=8808269) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 Using local APIC timer interrupts. APIC timer calibration result 12500394 Detected 12.500 MHz APIC timer. lockdep: fixing up alternatives. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4400.17 BogoMIPS (lpj=8800358) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 Brought up 2 CPUs Total of 2 processors activated (8804.31 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 khelper used greatest stack depth: 5752 bytes left net_namespace: 1112 bytes Time: 16:29:53 Date: 04/13/08 NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [1000, ffffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, ffffffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [80000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access Overlap at 0x7ffc0000-0x7ffc1000 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:04.0 reg 10 32bit mmio: [de000000, dfffffff] pci 0000:00:07.1: quirk: region 0800-083f claimed by ali7101 ACPI PCI: 0000:00:08.0 reg 10 io port: [e800, e8ff] PCI: 0000:00:08.0 reg 14 32bit mmio: [ff6ff000, ff6fffff] PCI: 0000:00:11.0 reg 10 io port: [e400, e4ff] PCI: 0000:00:11.0 reg 14 32bit mmio: [ff6fec00, ff6fecff] PCI: 0000:00:12.0 reg 20 io port: [ff00, ff0f] PCI: 0000:00:12.1 reg 10 io port: [ec00, ec07] PCI: 0000:00:12.1 reg 14 io port: [e080, e083] PCI: 0000:00:12.1 reg 18 io port: [e000, e007] PCI: 0000:00:12.1 reg 1c io port: [dc00, dc03] PCI: 0000:00:12.1 reg 20 io port: [d880, d88f] PCI: 0000:00:13.0 reg 10 32bit mmio: [ff6fd000, ff6fdfff] PCI: 0000:00:13.1 reg 10 32bit mmio: [ff6fc000, ff6fcfff] PCI: 0000:00:13.2 reg 10 32bit mmio: [ff6fb000, ff6fbfff] PCI: 0000:00:13.3 reg 10 32bit mmio: [ff6fe800, ff6fe8ff] PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff] PCI: 0000:01:00.0 reg 14 io port: [b000, b0ff] PCI: 0000:01:00.0 reg 18 32bit mmio: [ff2f0000, ff2fffff] PCI: 0000:01:00.1 reg 10 32bit mmio: [ff2e0000, ff2effff] PCI: bridge 0000:00:01.0 io port: [9000, bfff] PCI: bridge 0000:00:01.0 32bit mmio: [ff200000, ff2fffff] PCI: bridge 0000:00:01.0 32bit mmio pref: [cbf00000, dbefffff] PCI: bridge 0000:00:02.0 32bit mmio: [ff300000, ff3fffff] PCI: bridge 0000:00:05.0 32bit mmio: [ff400000, ff4fffff] PCI: 0000:04:06.0 reg 10 io port: [c800, c8ff] PCI: 0000:04:06.0 reg 14 32bit mmio: [ff5ffc00, ff5ffcff] PCI: Transparent bridge - 0000:00:06.0 PCI: bridge 0000:00:06.0 io port: [c000, cfff] PCI: bridge 0000:00:06.0 32bit mmio: [ff500000, ff5fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15) Overlap at 0x7ffb0000-0x7ffb5000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffc0000-0x7ffc1000 ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 6A, should be 5D [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report DMAR:parse DMAR table failure. agpgart: Detected AGP bridge 20 agpgart: Aperture pointing to RAM agpgart: Aperture from AGP @ de000000 size 4096 MB agpgart: Aperture too small (0 MB) agpgart: No usable aperture found. agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. system 00:07: ioport range 0x480-0x48f has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x87f could not be reserved system 00:07: ioport range 0x400-0x40f has been reserved system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved system 00:08: iomem range 0xe0000000-0xefffffff has been reserved system 00:08: iomem range 0xfec10000-0xfec10fff has been reserved system 00:08: iomem range 0xffb80000-0xffffffff could not be reserved system 00:0c: ioport range 0x290-0x29f has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved system 00:0d: iomem range 0x0-0x0 could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-bfff MEM window: 0xff200000-0xff2fffff PREFETCH window: 0x00000000cbf00000-0x00000000dbefffff PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: 0xff300000-0xff3fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: 0xff400000-0xff4fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: c000-cfff MEM window: 0xff500000-0xff5fffff PREFETCH window: 0x0000000080000000-0x00000000800fffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 29 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 34 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [80000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 01 index 0 io port: [9000, bfff] bus: 01 index 1 mmio: [ff200000, ff2fffff] bus: 01 index 2 mmio: [cbf00000, dbefffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [ff300000, ff3fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [ff400000, ff4fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [c000, cfff] bus: 04 index 1 mmio: [ff500000, ff5fffff] bus: 04 index 2 mmio: [80000000, 800fffff] bus: 04 index 3 io port: [0, ffff] bus: 04 index 4 mmio: [80000000, fcffffffff] bus: 04 index 5 mmio: [a0000, bffff] NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7222k freed audit: initializing netlink socket (disabled) type=2000 audit(1208104192.992:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 5120k, total 16384k vesafb: mode is 1280x1024x16, linelength=2560, pages=5 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 logips2pp: Detected unknown logitech mouse model 127 input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2 md: multipath personality registered for level -4 cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 33 PM: Resume from partition /dev/sda2 PM: Checking hibernation image. PM: Error -6 checking image file PM: Resume from disk failed. Magic number: 4:586:489 Freeing unused kernel memory: 288k freed Write protecting the kernel read-only data: 4360k mount used greatest stack depth: 5592 bytes left ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 19 scsi0 : pata_ali scsi1 : pata_ali ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB03, max UDMA/33 ata1.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB03 PQ: 0 ANSI: 5 modprobe used greatest stack depth: 4664 bytes left sata_uli 0000:00:12.1: version 1.3 ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 19 scsi2 : sata_uli scsi3 : sata_uli ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe080 bmdma 0xd880 irq 19 ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 19 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-7: SAMSUNG HD160JJ, WU100-33, max UDMA7 ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: ATA-7: SAMSUNG SP2004C, VM100-50, max UDMA7 ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP2004C VM10 PQ: 0 ANSI: 5 md: raid1 personality registered for level 1 BIOS EDD facility v0.16 2004-Jun-25, 6 devices found Driver 'sd' needs updating - please use bus_type methods ACPI: PCI Interrupt 0000:00:13.3[D] -> <5>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5GSI 23 (level, low) -> IRQ 23 sda6<6>ehci_hcd 0000:00:13.3: EHCI Host Controller ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd 0000:00:13.3: debug port 1 ehci_hcd 0000:00:13.3: irq 23, io mem 0xff6fe800 sda7 sda8<6>ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice sda9 > hub 1-0:1.0: USB hub found sd 2:0:0:0: [sda] Attached SCSI disk sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8<6>hub 1-0:1.0: 8 ports detected sdb9 sdb10 > sd 3:0:0:0: [sdb] Attached SCSI disk modprobe used greatest stack depth: 4512 bytes left usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ehci_hcd usb usb1: SerialNumber: 0000:00:13.3 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 20, io mem 0xff6fd000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 21, io mem 0xff6fc000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 22, io mem 0xff6fb000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25-rc8-x86-latest.git ohci_hcd usb usb4: SerialNumber: 0000:00:13.2 md: raid0 personality registered for level 0 xor: automatically using best checksumming function: generic_sse generic_sse: 7028.000 MB/sec xor: using function: generic_sse (7028.000 MB/sec) async_tx: api initialized (sync-only) raid6: int64x1 2127 MB/s raid6: int64x2 2734 MB/s raid6: int64x4 2361 MB/s raid6: int64x8 2189 MB/s raid6: sse2x1 2702 MB/s raid6: sse2x2 3176 MB/s raid6: sse2x4 3731 MB/s raid6: using algorithm sse2x4 (3731 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 0000000004000000 - 0000000008000000 PM: Basic memory bitmaps created PM: Basic memory bitmaps freed PM: Starting manual resume from disk PM: Resume from partition 8:2 PM: Checking hibernation image. PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3 FS on md1, internal journal EXT3-fs: mounted filesystem with ordered data mode. mount used greatest stack depth: 3712 bytes left scsi 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 3:0:0:0: Attached scsi generic sg2 type 0 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 17 eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:3a:0b:96, irq 17. 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21 eth1: RealTek RTL8139 at 0xc800, 00:48:54:4b:5c:38, IRQ 21 eth1: Identified 8139 chip type 'RTL-8139A' Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 udev: renamed network interface eth1 to eth0 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 parport_pc 00:06: reported by Plug and Play ACPI udev: renamed network interface eth0_rename to eth1 parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] ALSA /home/rafael/src/linux-2.6-x86/sound/pci/ac97/ac97_codec.c:2053: AC'97 1 does not respond - RESET ALSA /home/rafael/src/linux-2.6-x86/sound/pci/ac97/ac97_codec.c:2062: AC'97 1 access is not valid [0xffffffff], removing mixer. ALSA /home/rafael/src/linux-2.6-x86/sound/pci/intel8x0.c:2157: Unable to initialize codec #1 intel8x0_measure_ac97_clock: measured 51954 usecs intel8x0: clocking to 48000 md: md2 stopped. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com md: bind md: bind raid1: raid set md2 active with 2 out of 2 mirrors md: md3 stopped. md: bind md: bind raid1: raid set md3 active with 2 out of 2 mirrors md: md4 stopped. md: bind md: bind raid1: raid set md4 active with 2 out of 2 mirrors md: md5 stopped. md: bind md: bind raid1: raid set md5 active with 2 out of 2 mirrors md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: md4: found reiserfs format "3.6" with standard journal ReiserFS: md4: using ordered data mode ReiserFS: md4: journal params: device md4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md4: checking transaction log (md4) ReiserFS: md4: Using r5 hash to sort names ReiserFS: md5: found reiserfs format "3.6" with standard journal ReiserFS: md5: using ordered data mode ReiserFS: md5: journal params: device md5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md5: checking transaction log (md5) ReiserFS: md5: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2104504k swap on /dev/sda2. Priority:42 extents:1 across:2104504k Adding 2104504k swap on /dev/sdb2. Priority:42 extents:1 across:2104504k chkconfig used greatest stack depth: 3456 bytes left powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0xa Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffc0000-0x7ffc1000 Overlap at 0x7ffc0000-0x7ffc1000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffb0000-0x7ffb1000 Overlap at 0x7ffc0000-0x7ffc1000 Overlap at 0x7ffc0000-0x7ffc1000 lspci used greatest stack depth: 3432 bytes left Overlap at 0xd0000000-0xd0500000 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready ip6_tables: (C) 2000-2006 Netfilter Core Team Overlap at 0xd0000000-0xd8000000 Overlap at 0xff2f0000-0xff300000 ip_tables: (C) 2000-2006 Netfilter Core Team uli526x: eth1 NIC Link is Up 100 Mbps Full duplex ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready warning: `named' uses 32-bit capabilities (legacy support in use) Overlap at 0xd0000000-0xd8000000 Overlap at 0xff2f0000-0xff300000 Clocksource tsc unstable (delta = -274904273 ns) eth1: no IPv6 routers present Overlap at 0xd0000000-0xd8000000 Overlap at 0xff2f0000-0xff300000 Overlap at 0xd0000000-0xd8000000 Overlap at 0xff2f0000-0xff300000 Overlap at 0xd0000000-0xd8000000 Overlap at 0xff2f0000-0xff300000 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1