| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080414224740.GA31431@elf.ucw.cz>
Date: Tue, 15 Apr 2008 00:47:40 +0200
From: Pavel Machek <pavel@....cz>
To: kernel list <linux-kernel@...r.kernel.org>, kaszak@...il.com,
lcostantino@...il.com
Subject: w35und: add softmac interface
Hi!
This adds softmac interface to w35und driver... so it becomes monster
driver with _two_ interfaces.
If you initialize hardmac interface, then softmac starts to
works... it associates to AP, and can even ping.
(Or at least I hope so... it was somewhat too easy.)
Pavel
diff --git a/drivers/net/wireless/winbond/winbondport/adapter.h b/drivers/net/wireless/winbond/winbondport/adapter.h
index 64585c5..81e7bd8 100644
--- a/drivers/net/wireless/winbond/winbondport/adapter.h
+++ b/drivers/net/wireless/winbond/winbondport/adapter.h
@@ -19,7 +19,7 @@ typedef struct WB32_ADAPTER
TESTSTA sTestSta; // For test station
WBLINUX WbLinux;
- WB_STA_WPA_DESCRIPTION Global_STA_Wpa;//For WB_WPA
+ WB_STA_WPA_DESCRIPTION Global_STA_Wpa;
struct iw_statistics iw_stats;
u8 LinkName[MAX_ANSI_STRING];
diff --git a/drivers/net/wireless/winbond/winbondport/gl_80211.h b/drivers/net/wireless/winbond/winbondport/gl_80211.h
index 8cda514..7828573 100644
--- a/drivers/net/wireless/winbond/winbondport/gl_80211.h
+++ b/drivers/net/wireless/winbond/winbondport/gl_80211.h
@@ -5,8 +5,7 @@ #define __GL_80211_H__
/****************** CONSTANT AND MACRO SECTION ******************************/
/* BSS Type */
-enum
-{
+enum {
WLAN_BSSTYPE_INFRASTRUCTURE = 0,
WLAN_BSSTYPE_INDEPENDENT,
WLAN_BSSTYPE_ANY_BSS,
@@ -15,29 +14,25 @@ enum
/* Preamble_Type, see <SFS-802.11G-MIB-203> */
-typedef enum preamble_type
-{
+typedef enum preamble_type {
WLAN_PREAMBLE_TYPE_SHORT,
WLAN_PREAMBLE_TYPE_LONG,
} preamble_type_e;
/* Slot_Time_Type, see <SFS-802.11G-MIB-208> */
-typedef enum slot_time_type
-{
- WLAN_SLOT_TIME_TYPE_LONG, // TODO: 0627 kevin
+typedef enum slot_time_type {
+ WLAN_SLOT_TIME_TYPE_LONG,
WLAN_SLOT_TIME_TYPE_SHORT,
} slot_time_type_e;
/*--------------------------------------------------------------------------*/
/* Encryption Mode */
-typedef enum
-{
+typedef enum {
WEP_DISABLE = 0,
WEP_64,
WEP_128,
- // TODO: for _WPA_SUPPORTED_ (0627 kevin)
ENCRYPT_DISABLE,
ENCRYPT_WEP,
ENCRYPT_WEP_NOKEY,
@@ -45,24 +40,17 @@ typedef enum
ENCRYPT_TKIP_NOKEY,
ENCRYPT_CCMP,
ENCRYPT_CCMP_NOKEY,
-
- //#ifdef _WPA_SUPPORTED_
- // RSN_TKIP,
- // RSN_CCMP,
- //#endif // _WPA_SUPPORTED_
} encryption_mode_e;
-typedef enum _WLAN_RADIO
-{
+typedef enum _WLAN_RADIO {
WLAN_RADIO_ON,
WLAN_RADIO_OFF,
WLAN_RADIO_MAX, // not a real type, defined as an upper bound
} WLAN_RADIO;
-typedef struct _WLAN_RADIO_STATUS
-{
+typedef struct _WLAN_RADIO_STATUS {
WLAN_RADIO HWStatus;
- WLAN_RADIO SWStatus;
+ WLAN_RADIO SWStatus;
} WLAN_RADIO_STATUS;
//----------------------------------------------------------------------------
@@ -93,11 +81,9 @@ typedef enum _WLAN_REGION_CODE
WLAN_REGION_FRANCE,
WLAN_REGION_SPAIN,
WLAN_REGION_ISRAEL,
- //WLAN_REGION_CANADA,
WLAN_REGION_MAX, // not a real type, defined as an upper bound
} WLAN_REGION_CODE;
-//#define REGION_NAME_MAX_LENGTH 32
#define REGION_NAME_MAX_LENGTH 256
typedef struct _WLAN_REGION_CHANNELS
@@ -115,7 +101,6 @@ typedef struct _WLAN_REGION_CAPABILITIES
WLAN_REGION_CHANNELS Region[1];
} WLAN_REGION_CAPABILITIES;
-// 20041103 1.1.91.1000 ybjiang
typedef struct _region_name_map {
WLAN_REGION_CODE region;
u8 *name;
diff --git a/drivers/net/wireless/winbond/winbondport/gui_structures.h b/drivers/net/wireless/winbond/winbondport/gui_structures.h
index 1b83adb..e69de29 100644
--- a/drivers/net/wireless/winbond/winbondport/gui_structures.h
+++ b/drivers/net/wireless/winbond/winbondport/gui_structures.h
@@ -1,315 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-// GUI_Structures.h
-//
-// This file contains the definitions and data structures used by GUI
-//
-// 10/31/02' initial version
-// 7/15/03' modified by PD50(version wb32mmi_0611)
-////////////////////////////////////////////////////////////////////////////
-
-#ifndef _GUI_Structures_H_
-#define _GUI_Structures_H_
-
-// Some miscellaneous definitions
-#define MAC_ADDR_LENGTH 6
-#define MAX_CHANNELS 30
-#define GUI_MAX_BSS_DESCRIPTIONS 24
-
-// Define BSSType
-#define GUI_INFRASTRUCTURE 0
-#define GUI_INDEPENDENT 1
-#define GUI_ANY_BSS 2
-
-#ifdef _OLD_SW_MAC_
-// Define STAState
-#define GUI_BSS_STATE_NOSCAN 0
-#define GUI_BSS_STATE_SCANNING 1
-#define GUI_BSS_STATE_IN_JOIN 2
-#define GUI_BSS_STATE_BSS 3
-#define GUI_BSS_STATE_AUTHEN 4
-#define GUI_BSS_STATE_ASSOC 5
-#define GUI_BSS_STATE_IBSS 6
-
-#else
-//state of SME module
-#define DISABLED 0
-#define INIT_SCAN 1
-#define SCAN_READY 2
-#define START_IBSS 3
-#define JOIN_PENDING 4
-#define JOIN_CFM 5
-#define AUTHENTICATE_PENDING 6
-#define AUTHENTICATED 7
-#define CONNECTED 8
-//#define EAP_STARTING 9
-//#define EAPOL_AUTHEN_PENDING 10
-//#define SECURE_CONNECTED 11
-
-#endif
-
-// Define scan type
-#define GUI_ST_ACTIVE 0
-#define GUI_ST_PASSIVE 1
-
-// Define TxRate
-#define GUI_TXRATE_1M 0
-//#define GUI_TXRATE_0M 1
-#define GUI_TXRATE_2MLONG 2
-#define GUI_TXRATE_2MSHORT 3
-#define GUI_TXRATE_55MLONG 4
-#define GUI_TXRATE_55MSHORT 5
-#define GUI_TXRATE_11MLONG 6
-#define GUI_TXRATE_11MSHORT 7
-#define GUI_TXRATE_AUTO 255
-
-// Define Basic Tx Rate Set
-#define GUI_BASIC_TXRATE_1M 0x82
-#define GUI_BASIC_TXRATE_2M 0x84
-#define GUI_BASIC_TXRATE_5_5M 0x8b
-#define GUI_BASIC_TXRATE_11M 0X96
-
-#define GUI_OPERATION_TXRATE_1M 0x2
-#define GUI_OPERATION_TXRATE_2M 0x4
-#define GUI_OPERATION_TXRATE_5_5M 0xb
-#define GUI_OPERATION_TXRATE_11M 0x16
-
-// Define Extended supported rates Set for 802.11g
-#define GUI_EXTENDED_TXRATE_22M 0x2c
-#define GUI_EXTENDED_TXRATE_33M 0x42
-#define GUI_EXTENDED_TXRATE_6M 0x0c
-#define GUI_EXTENDED_TXRATE_9M 0x12
-#define GUI_EXTENDED_TXRATE_12M 0x18
-#define GUI_EXTENDED_TXRATE_18M 0x24
-#define GUI_EXTENDED_TXRATE_24M 0x30
-#define GUI_EXTENDED_TXRATE_36M 0x48
-#define GUI_EXTENDED_TXRATE_48M 0x60
-#define GUI_EXTENDED_TXRATE_54M 0x6c
-
-// select tx rate automatically
-#define GUI_ALL_TXRATE 0x00
-
-
-//New added for b+g
-#define GUI_MODE_802_11_BG 0
-#define GUI_MODE_802_11_A 1
-#define GUI_MODE_802_11_ABG 2
-#define GUI_MODE_802_11_BG_IBSS 3
-
-typedef struct _GUIScanPara
-{
- BYTE BSSType;
- BYTE BSSID[MAC_ADDR_LENGTH];
- BYTE SSID[33]; // 0x00 as terminated
- BYTE ScanType;
- WORD ProbeDelay;
- BYTE ChannelList[MAX_CHANNELS];
- WORD MinChannelTime;
- WORD MaxChannelTime;
- unsigned char boUseFastScanOption;
-
-} GUIScanPara, *psGUIScanPara;
-
-typedef struct _GUIBssDescriptElement
-{
- BYTE Timestamp[8]; // 8 octets
- WORD Beacon_Period; // 2 octets
- WORD CapabilityInformation; // 2 octets
- BYTE BSSID[MAC_ADDR_LENGTH];
- BYTE SSID[33]; // 0x00 as terminated
- BYTE BSSType;
- BYTE DTIM_Period; // 1 octet
- BYTE Local_Time[8]; // 8 octets
- WORD CFP_MaxDuration; // in Time Units
- WORD ATIM_Window; // IBSS_Parameter_Set_Element
- BYTE BSSBasicRateSet[9]; // end with zero
- BYTE Current_Channel; // DS_Parameter_Set_Element
- DWORD Rssi; // RSSI information. -10(Good) ~ -200(Bad)
-} GUIBssDescriptElement, *psGUIBssDescriptElement;
-
-typedef struct _GUIBssList
-{
- WORD NumberOfItems;
- GUIBssDescriptElement BSS[GUI_MAX_BSS_DESCRIPTIONS];
-
-} GUIBssList, *psGUIBssList;
-
-/*
-typedef struct _GUIStartPara
-{
- BYTE SSID[33]; // 0x00 as terminated
- WORD BeaconPeriod;
- BYTE Current_Channel; // DS_Parameter_Set_Element
- WORD ATIM_Window; // IBSS_Parameter_Set_Element
- BYTE BSSBasicRateSet[9]; // end with \x00
- BYTE OperationalRateSet[9]; // End with \x00
-
-} GUIStartPara, *psGUIStartPara;
-*/
-
-// Expend rate set for 802.11g
-#define MAX_BASIC_RATE_SET 15
-#define MAX_OPT_RATE_SET MAX_BASIC_RATE_SET
-typedef struct _GUIStartPara
-{
- BYTE SSID[33]; // 0x00 as terminated
- WORD BeaconPeriod;
- BYTE Current_Channel; // DS_Parameter_Set_Element
- WORD ATIM_Window; // IBSS_Parameter_Set_Element
- BYTE BSSBasicRateSet [MAX_BASIC_RATE_SET]; // end with \x00
- BYTE OperationalRateSet[MAX_OPT_RATE_SET];
-
-} GUIStartPara, *psGUIStartPara;
-
-
-struct Reason_Code
-{
- BYTE PeerSTAAddr[MAC_ADDR_LENGTH];
- WORD ReasonCode;
-};
-
-typedef struct AuthenReq_Parameter
-{
- BYTE PeerSTAAddr[MAC_ADDR_LENGTH];
- BYTE AuthenType;
- DWORD AuthenFailTimeOut; // TU
-
-} GUIAuthenReqPara, *psGUIAuthenReqPara;
-
-// AuthenType
-#define AUTH_OPEN_SYSTEM 0
-#define AUTH_SHARED_KEY 1
-
-typedef struct Reason_Code GUIDeAuthenReqPara, *psGUIDeAuthenReqPara;
-
-/*
-typedef struct AssocReq_Parameter
-{
- BYTE PeerSTAAddr[MAC_ADDR_LENGTH];
- WORD AssocFailTimeOut; // TU
- WORD CapabilityInfo;
- WORD ListenInterval; // no. of beacon intervals
-
-} GUIAssocReqPara, *psGUIAssocReqPara;
-*/
-
-
-// PD500611 chequer add
-typedef struct AssocReq_Parameter
-{
- BYTE PeerSTAAddr[MAC_ADDR_LENGTH];
- WORD AssocFailTimeOut; // TU
- WORD CapabilityInfo;
- WORD ListenInterval; // no. of beacon intervals
- BYTE BasicRateSet [MAX_BASIC_RATE_SET]; // end with \x00
- BYTE OperationalRateSet[MAX_OPT_RATE_SET];
-
-} GUIAssocReqPara, *psGUIAssocReqPara;
-
-/*
-typedef struct ReAssocReq_Parameter
-{
- BYTE NewAPAddr[MAC_ADDR_LENGTH];
- WORD ReAssocFailTimeOut; // TU
- WORD CapabilityInfo;
- WORD ListenInterval; // no. of beacon intervals
-
-} GUIReAssocReqPara, *psGUIReAssocReqPara;
-*/
-
-typedef struct ReAssocReq_Parameter
-{
- BYTE NewAPAddr[MAC_ADDR_LENGTH];
- WORD ReAssocFailTimeOut; // TU
- WORD CapabilityInfo;
- WORD ListenInterval; // no. of beacon intervals
- BYTE BasicRateSet [MAX_BASIC_RATE_SET]; // end with \x00
- BYTE OperationalRateSet[MAX_OPT_RATE_SET];
-
-} GUIReAssocReqPara, *psGUIReAssocReqPara;
-
-
-typedef struct Reason_Code GUIDisAssocReqPara, *psGUIDisAssocReqPara;
-
-typedef WORD GUI_FRAG_THRSHLD,GUI_RTS_THRSHLD;
-
-typedef BYTE GUIWEPMode; // disable/64 bits/128 bits
-#define WEP_DISABLE 0 // Default
-#define WEP_KEY_64 1
-#define WEP_KEY_128 2
-
-typedef struct _GUIWEPPara
-{
- BYTE KeyIndex; // 0,1,2,3 for shared-key, 0x80 for map-key
- BYTE KeyValue[13]; // length depend on KEY_64 or KEY_128
- BYTE MACAddr[MAC_ADDR_LENGTH]; // = NULL if KeyIndex!=0x80
-
-} GUIWEPPara, *psGUIWEPPara;
-
-typedef struct _GUIStatistics
-{
- DWORD NumTxMMPDU;
- DWORD NumTxMMPDUDiscarded;
- DWORD NumRxMMPDU;
- DWORD NumRxMMPDUDiscarded;
- DWORD NumTxMSDU;
- DWORD NumRxMSDU;
- DWORD NumFrameDuplicate;
- DWORD NumTxTBTTstart;
- DWORD NumTxETR;
- DWORD NumTxWepOnFalse;
- DWORD NumTxNullKey;
- DWORD NumTxRetry[8];
-} GUIStatistics, *psGUIStatistics;
-
-typedef struct _GUIRegAccess
-{
- BYTE RegNo;
- DWORD dwValue;
-} GUIRegAccess, *psGUIRegAccess;
-
-#define WEP_MAP_KEY 0x80
-
-typedef BYTE GUIRoamingMode;
-#define ROAMING_DISABLED 0
-#define ROAMING_ENABLED 1
-
-//----------- 06/28/04' ----------------
-typedef struct _AdvanceStatus
-{
- BYTE OperationMode;
- BYTE ProtectionMode; //unsigned char
- BYTE PreambleType; //unsigned char: 1(short), 0(long)
- BYTE SlotTimeType; //unsigned char: 1(short), 0(long)
- BYTE CWMinValue;
- //12/06/04' added
- BYTE AntennaType; //0 or 1
- WORD CWMaxValue;
-}GUIAdvanceStatus, *psGUIAdvanceStatus;
-
-
-//--------- DTO threshold parameters -------------
-typedef struct _DTOPara
-{
- WORD DTO_PeriodicCheckCycle;
- WORD DTO_RssiThForAntDiv;
- WORD DTO_TxCountThForCalcNewRate;
- WORD DTO_TxRateIncThreshold;
- WORD DTO_TxRateDecThreshold;
- WORD DTO_TxRateEqThreshold;
- WORD DTO_TxRateBackoff;
- WORD DTO_TxRetryRateReduce;
- WORD DTO_TxPowerIndex;
-}GUIDtoPara, *psGUIDtoPara;
-
-typedef struct _EVENT_LOG
-{
- WORD Count; //Total count from start
- WORD index; //Buffer index, 0 ~ 63
- DWORD EventValue[64]; //BYTE 3~2 : count, BYTE 1 : Event, BYTE 0 : reason
-} GUIEvent_Log, *psGUIEvent_Log;
-
-
-#endif // GUI_structures
-
-
diff --git a/drivers/net/wireless/winbond/winbondport/linux/wb35reg.c b/drivers/net/wireless/winbond/winbondport/linux/wb35reg.c
index 9809139..f119247 100644
--- a/drivers/net/wireless/winbond/winbondport/linux/wb35reg.c
+++ b/drivers/net/wireless/winbond/winbondport/linux/wb35reg.c
@@ -614,7 +614,7 @@ Wb35Reg_destroy(phw_data_t pHwData)
//====================================================================================
// The function can be run in passive-level only.
//====================================================================================
-unsigned char Wb35Reg_initial( phw_data_t pHwData )
+unsigned char Wb35Reg_initial(phw_data_t pHwData)
{
PWB35REG pWb35Reg=&pHwData->Wb35Reg;
u32 ltmp;
@@ -672,20 +672,6 @@ unsigned char Wb35Reg_initial( phw_data
// Update Ethernet address
memcpy( pHwData->CurrentMacAddress, pHwData->PermanentMacAddress, ETH_LENGTH_OF_ADDRESS );
- #ifdef _PE_REG_DUMP_
- {
- int i;
- WBDEBUG(("EthAddr = "));//Debug information
- for( i=0; i<ETH_LENGTH_OF_ADDRESS; i++ )
- {
- WBDEBUG(("%02x ",pHwData->PermanentMacAddress[i] ));
- if( i==5 ) break;
- WBDEBUG(("-"));
- }
- WBDEBUG(("\n"));
- }
- #endif
-
// Update software variable
pHwData->SoftwareSet = (u16)(SoftwareSet & 0xffff);
TxVga &= 0x000000ff;
diff --git a/drivers/net/wireless/winbond/winbondport/linux/wb35rx.c b/drivers/net/wireless/winbond/winbondport/linux/wb35rx.c
index f9d2b82..7858030 100644
--- a/drivers/net/wireless/winbond/winbondport/linux/wb35rx.c
+++ b/drivers/net/wireless/winbond/winbondport/linux/wb35rx.c
@@ -106,20 +106,20 @@ void Wb35Rx_Complete(PURB pUrb)
pRxBufferAddress = pWb35Rx->pDRx;
BulkLength = (u16)pUrb->actual_length;
- //The IRP is completed
+ // The IRP is completed
pWb35Rx->EP3vm_state = VM_COMPLETED;
if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid
break;
- if( pWb35Rx->rx_halt )
+ if (pWb35Rx->rx_halt)
break;
// Start to process the data only in successful condition
pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress);
- //The URB is completed, check the result
+ // The URB is completed, check the result
if (pWb35Rx->EP3VM_status != 0) {
#ifdef _PE_USB_STATE_DUMP_
WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
@@ -136,22 +136,21 @@ void Wb35Rx_Complete(PURB pUrb)
SizeCheck -= 4;
SizeCheck = (SizeCheck + 3) & ~0x03;
SizeCheck += 12; // 8 + 4 badbeef
- if( (BulkLength > 1600) ||
+ if ((BulkLength > 1600) ||
(SizeCheck > 1600) ||
(BulkLength != SizeCheck) ||
- (BulkLength == 0) ) // Add for fail Urb
- {
+ (BulkLength == 0)) { // Add for fail Urb
pWb35Rx->EP3vm_state = VM_STOP;
pWb35Rx->Ep3ErrorCount2++;
}
}
- //Indicating the receiving data
+ // Indicating the receiving data
pWb35Rx->ByteReceived += BulkLength;
pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;
if (!pWb35Rx->RxOwner[ RxBufferId ])
- Wb35Rx_indicate( pHwData );
+ Wb35Rx_indicate(pHwData);
kfree(pWb35Rx->pDRx);
// Do the next receive
@@ -259,7 +258,9 @@ void Wb35Rx_adjust(PDESCRIPTOR pRxDes)
pRxDes->buffer_size[0] = BufferSize;
}
-//931130.4.b
+extern void packet_came(char *pRxBufferAddress, int PacketSize);
+
+
u16 Wb35Rx_indicate(phw_data_t pHwData)
{
DESCRIPTOR RxDes;
@@ -269,29 +270,27 @@ u16 Wb35Rx_indicate(phw_data_t pHwData)
u16 stmp, BufferSize, stmp2 = 0;
u32 RxBufferId;
- // Only one thread be allowed to run into the follow
+ // Only one thread be allowed to run into the following
do {
RxBufferId = pWb35Rx->RxProcessIndex;
- if( pWb35Rx->RxOwner[ RxBufferId ] )//Owner by VM
+ if (pWb35Rx->RxOwner[ RxBufferId ]) //Owner by VM
break;
pWb35Rx->RxProcessIndex++;
pWb35Rx->RxProcessIndex %= MAX_USB_RX_BUFFER_NUMBER;
- //pRxBufferAddress = pWb35Rx->RxBuffer[ RxBufferId ];
pRxBufferAddress = pWb35Rx->pDRx;
BufferSize = pWb35Rx->RxBufferSize[ RxBufferId ];
// Parse the bulkin buffer
- while( BufferSize >= 4 )
- {
+ while (BufferSize >= 4) {
if ((cpu_to_le32(*(PULONG)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a
break;
// Get the R00 R01 first
- RxDes.R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress); //20060926 add by anson's endian
+ RxDes.R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress);
PacketSize = (u16)RxDes.R00.R00_receive_byte_count;
- RxDes.R01.value = le32_to_cpu(*((PULONG)(pRxBufferAddress+4))); //20060926 anson's ednian
+ RxDes.R01.value = le32_to_cpu(*((PULONG)(pRxBufferAddress+4)));
// For new DMA 4k
if ((PacketSize & 0x03) > 0)
PacketSize -= 4;
@@ -309,7 +308,7 @@ u16 Wb35Rx_indicate(phw_data_t pHwData)
// Start to process Rx buffer
// RxDes.Descriptor_ID = RxBufferId; // Due to synchronous indicate, the field doesn't necessary to use.
- BufferSize -= 8;//subtract 8 byte for 35's USB header length
+ BufferSize -= 8; //subtract 8 byte for 35's USB header length
pRxBufferAddress += 8;
RxDes.buffer_address[0] = pRxBufferAddress;
@@ -317,7 +316,9 @@ u16 Wb35Rx_indicate(phw_data_t pHwData)
RxDes.buffer_number = 1;
RxDes.buffer_start_index = 0;
RxDes.buffer_total_size = RxDes.buffer_size[0];
- Wb35Rx_adjust( &RxDes );
+ Wb35Rx_adjust(&RxDes);
+
+ packet_came(pRxBufferAddress, PacketSize);
// Indicating to upper module
hal_descriptor_indicate( pHwData, &RxDes );
diff --git a/drivers/net/wireless/winbond/winbondport/linux/wb35tx.c b/drivers/net/wireless/winbond/winbondport/linux/wb35tx.c
index a5b26ec..80fed46 100644
--- a/drivers/net/wireless/winbond/winbondport/linux/wb35tx.c
+++ b/drivers/net/wireless/winbond/winbondport/linux/wb35tx.c
@@ -39,8 +39,8 @@ void Wb35Tx(phw_data_t pHwData)
PADAPTER Adapter = pHwData->Adapter;
PUCHAR pTxBufferAddress;
PMDS pMds = &Adapter->Mds;
- struct urb * pUrb = (struct urb *)pWb35Tx->Tx4Urb;
- int retv;
+ struct urb * pUrb = (struct urb *)pWb35Tx->Tx4Urb;
+ int retv;
u32 SendIndex;
@@ -110,8 +110,7 @@ void Wb35Tx_complete(struct urb * pUrb)
break;
// The URB is completed, check the result
- if( pWb35Tx->EP4VM_status != 0 )
- {
+ if (pWb35Tx->EP4VM_status != 0) {
#ifdef _PE_USB_STATE_DUMP_
WBDEBUG(("EP4 IoCompleteRoutine return error\n"));
DebugUsbdStatusInformation( pWb35Tx->EP4VM_status );
@@ -121,8 +120,8 @@ void Wb35Tx_complete(struct urb * pUrb)
}
// Do the next send
- Mds_Tx( Adapter );
- Wb35Tx( pHwData );
+ Mds_Tx(Adapter);
+ Wb35Tx(pHwData);
return;
} while(FALSE);
@@ -157,7 +156,7 @@ unsigned char Wb35Tx_initial(phw_data_t
}
//======================================================
-void Wb35Tx_stop( phw_data_t pHwData )
+void Wb35Tx_stop(phw_data_t pHwData)
{
PWB35TX pWb35Tx = &pHwData->Wb35Tx;
@@ -198,7 +197,7 @@ void Wb35Tx_destroy(phw_data_t pHwData)
#endif
}
-void Wb35Tx_CurrentTime( phw_data_t pHwData, u32 TimeCount )
+void Wb35Tx_CurrentTime(phw_data_t pHwData, u32 TimeCount)
{
PWB35TX pWb35Tx = &pHwData->Wb35Tx;
unsigned char Trigger = FALSE;
@@ -214,13 +213,12 @@ void Wb35Tx_CurrentTime( phw_data_t pHw
}
}
-void Wb35Tx_EP2VM_start( phw_data_t pHwData )
+void Wb35Tx_EP2VM_start(phw_data_t pHwData)
{
PWB35TX pWb35Tx = &pHwData->Wb35Tx;
// Allow only one thread to run into function
- if( OS_ATOMIC_INC( pHwData->Adapter, &pWb35Tx->TxResultCount ) == 1 )
- {
+ if (OS_ATOMIC_INC( pHwData->Adapter, &pWb35Tx->TxResultCount ) == 1) {
pWb35Tx->EP2vm_state = VM_RUNNING;
Wb35Tx_EP2VM( pHwData );
}
@@ -237,28 +235,22 @@ void Wb35Tx_EP2VM(phw_data_t pHwData)
int retv;
do {
- if( pHwData->SurpriseRemove || pHwData->HwStop )
+ if (pHwData->SurpriseRemove || pHwData->HwStop)
break;
- if( pWb35Tx->tx_halt )
+ if (pWb35Tx->tx_halt)
break;
//
// Issuing URB
//
- usb_fill_int_urb( pUrb,
- pHwData->WbUsb.udev,
- usb_rcvintpipe(pHwData->WbUsb.udev,2),
- pltmp,
- MAX_INTERRUPT_LENGTH,
- Wb35Tx_EP2VM_complete,
- pHwData,32);
+ usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2),
+ pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32);
pWb35Tx->EP2vm_state = VM_RUNNING;
retv = wb_usb_submit_urb( pUrb );
- if(retv < 0)
- {
+ if(retv < 0) {
#ifdef _PE_TX_DUMP_
WBDEBUG(("EP2 Tx Irp sending error\n"));
#endif
diff --git a/drivers/net/wireless/winbond/winbondport/linux/wbusb.c b/drivers/net/wireless/winbond/winbondport/linux/wbusb.c
index 9727477..de30a56 100644
--- a/drivers/net/wireless/winbond/winbondport/linux/wbusb.c
+++ b/drivers/net/wireless/winbond/winbondport/linux/wbusb.c
@@ -1,8 +1,6 @@
#include "sysdef.h"
-
-
-
+#include <net/mac80211.h>
MODULE_AUTHOR( DRIVER_AUTHOR );
@@ -35,6 +33,134 @@ static struct usb_driver wb35_driver = {
.id_table = Id_Table,
};
+static const struct ieee80211_rate wbsoft_rates[] = {
+ { .rate = 10,
+ .val = 10,
+ .val2 = -10,
+ .flags = IEEE80211_RATE_CCK_2 },
+};
+
+static const struct ieee80211_channel wbsoft_channels[] = {
+ { .chan = 1,
+ .freq = 2412},
+};
+
+static struct ieee80211_hw_mode wbsoft_modes[1];
+int wbsoft_enabled;
+struct ieee80211_hw *my_dev;
+PADAPTER my_adapter;
+
+static int wbsoft_add_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ printk("wbsoft_add interface called\n");
+ return 0;
+}
+
+static void wbsoft_remove_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ printk("wbsoft_remove interface called\n");
+}
+
+static int wbsoft_nop(void)
+{
+ printk("wbsoft_nop called\n");
+ return 0;
+}
+
+static void wbsoft_configure_filter(struct ieee80211_hw *dev,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count, struct dev_mc_list *mclist)
+{
+ static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+ unsigned int bit_nr, new_flags;
+ u32 mc_filter[2];
+ int i;
+
+ new_flags = 0;
+
+ if (*total_flags & FIF_PROMISC_IN_BSS) {
+ new_flags |= FIF_PROMISC_IN_BSS;
+ mc_filter[1] = mc_filter[0] = ~0;
+ } else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {
+ new_flags |= FIF_ALLMULTI;
+ mc_filter[1] = mc_filter[0] = ~0;
+ } else {
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0; i < mc_count; i++) {
+ if (!mclist)
+ break;
+ printk("Should call ether_crc here\n");
+ //bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ bit_nr = 0;
+
+ bit_nr &= 0x3F;
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ mclist = mclist->next;
+ }
+ }
+
+ dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
+
+ *total_flags = new_flags;
+}
+
+static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ if (1 == MLMESendFrame(my_adapter, skb->data, skb->len, FRAME_TYPE_802_11_MANAGEMENT))
+ printk("frame sent ok?\n");
+ return NETDEV_TX_OK;
+}
+
+
+static int wbsoft_start(struct ieee80211_hw *dev)
+{
+ wbsoft_enabled = 1;
+ printk("wbsoft_start called\n");
+ return 0;
+}
+
+static int wbsoft_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
+{
+ printk("wbsoft_config called\n");
+ return 0;
+}
+
+static int wbsoft_config_interface(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf)
+{
+ printk("wbsoft_config_interface called\n");
+ return 0;
+}
+
+static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
+{
+ printk("wbsoft_get_tsf called\n");
+ return 0;
+}
+
+static const struct ieee80211_ops wbsoft_ops = {
+ .tx = wbsoft_tx,
+ .start = wbsoft_start, /* Start can be pretty much empty as we do WbWLanInitialize() during probe? */
+ .stop = wbsoft_nop,
+ .add_interface = wbsoft_add_interface,
+ .remove_interface = wbsoft_remove_interface,
+ .config = wbsoft_config,
+ .config_interface = wbsoft_config_interface,
+ .configure_filter = wbsoft_configure_filter,
+ .get_stats = wbsoft_nop,
+ .get_tx_stats = wbsoft_nop,
+ .get_tsf = wbsoft_get_tsf,
+};
+
+struct wbsoft_priv {
+};
+
+
int __init wb35_init(void)
{
printk("[w35und]driver init\n");
@@ -51,7 +177,7 @@ module_init(wb35_init);
module_exit(wb35_exit);
// Usb kernel subsystem will call this function when a new device is plugged into.
-int wb35_probe( struct usb_interface *intf,const struct usb_device_id *id_table )
+int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
{
PADAPTER Adapter;
PWBLINUX pWbLinux;
@@ -105,6 +231,7 @@ int wb35_probe( struct usb_interface *in
Adapter = netdev_priv(netdev);
memset(Adapter, 0, sizeof(ADAPTER));
+ my_adapter = Adapter;
pWbLinux = &Adapter->WbLinux;
pWbLinux->netdev = netdev;
pWbUsb = &Adapter->sHwData.WbUsb;
@@ -140,6 +267,45 @@ int wb35_probe( struct usb_interface *in
printk("w35und: couldn't register the netdev!\n");
break;
}
+
+ {
+ struct wbsoft_priv *priv;
+ struct ieee80211_hw *dev;
+ int res;
+
+ dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
+
+ if (!dev) {
+ printk("w35und: ieee80211 alloc failed\n" );
+ BUG();
+ }
+
+ my_dev = dev;
+
+ SET_IEEE80211_DEV(dev, &udev->dev);
+ SET_IEEE80211_PERM_ADDR(dev, netdev->dev_addr);
+
+ dev->extra_tx_headroom = 12; /* FIXME */
+ dev->flags = IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED;
+
+ dev->channel_change_time = 1000;
+ dev->max_rssi = 100;
+
+ dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
+
+ wbsoft_modes[0].num_channels = 1;
+ wbsoft_modes[0].channels = wbsoft_channels;
+ wbsoft_modes[0].mode = MODE_IEEE80211B;
+ wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates);
+ wbsoft_modes[0].rates = wbsoft_rates;
+
+ res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]);
+ BUG_ON(res);
+
+ res = ieee80211_register_hw(dev);
+ BUG_ON(res);
+ }
+
usb_set_intfdata( intf, Adapter );
printk("[w35und] _probe OK\n");
@@ -152,15 +318,41 @@ int wb35_probe( struct usb_interface *in
return -ENOMEM;
}
+void packet_came(char *pRxBufferAddress, int PacketSize)
+{
+ struct sk_buff *skb;
+ struct ieee80211_rx_status rx_status = {0};
+
+ if (!wbsoft_enabled)
+ return;
+
+ printk("packet came, device enabled\n");
+
+ skb = dev_alloc_skb(PacketSize);
+ if (!skb)
+ printk("Not enough memory for packet, FIXME\n");
+
+ memcpy(skb_put(skb, PacketSize),
+ pRxBufferAddress,
+ PacketSize);
+
+ rx_status.rate = 10;
+ rx_status.channel = 1;
+ rx_status.freq = 12345;
+ rx_status.phymode = MODE_IEEE80211B;
+
+ ieee80211_rx_irqsafe(my_dev, skb, &rx_status);
+}
+
unsigned char
-WbUsb_initial( phw_data_t pHwData )
+WbUsb_initial(phw_data_t pHwData)
{
return 1;
}
void
-WbUsb_destroy( phw_data_t pHwData )
+WbUsb_destroy(phw_data_t pHwData)
{
}
@@ -172,7 +364,7 @@ int wb35_open(struct net_device *netdev)
netif_start_queue(netdev);
//TODO : put here temporarily
- hal_set_accept_broadcast( pHwData, 1); // open accept broadcast
+ hal_set_accept_broadcast(pHwData, 1); // open accept broadcast
return 0;
}
@@ -199,4 +391,3 @@ void wb35_disconnect(struct usb_interfac
}
-
diff --git a/drivers/net/wireless/winbond/winbondport/mds.c b/drivers/net/wireless/winbond/winbondport/mds.c
index 2d06cd9..2f5cf77 100644
--- a/drivers/net/wireless/winbond/winbondport/mds.c
+++ b/drivers/net/wireless/winbond/winbondport/mds.c
@@ -1,7 +1,8 @@
#include "os_common.h"
#include "wpa/eap.h"
+
void
-Mds_reset_descriptor( PADAPTER Adapter )
+Mds_reset_descriptor(PADAPTER Adapter)
{
PMDS pMds = &Adapter->Mds;
@@ -14,7 +15,7 @@ Mds_reset_descriptor( PADAPTER Adapter
}
unsigned char
-Mds_initial( PADAPTER Adapter )
+Mds_initial(PADAPTER Adapter)
{
PMDS pMds = &Adapter->Mds;
@@ -28,7 +29,7 @@ Mds_initial( PADAPTER Adapter )
}
void
-Mds_Destroy( PADAPTER Adapter )
+Mds_Destroy(PADAPTER Adapter)
{
vRxTimerStop(Adapter);
}
@@ -73,12 +74,11 @@ Mds_Tx(PADAPTER Adapter)
PacketFrom = 1;
PacketSize = QUERY_SIZE_FIRST( Adapter );
if (!PacketSize) {
- if( !TS_RUNNING_IN_TESTSTA_MODE ) // If driver doesn't run in test mode, send MLME and normal data frame
- {
+ if (!TS_RUNNING_IN_TESTSTA_MODE) { // If driver doesn't run in test mode, send MLME and normal data frame
PacketFrom = 2;
PacketSize = QUERY_SIZE_SECOND(Adapter);
- if( !PacketSize ) {
- if( pMds->ScanTxPause ) //No management frames to transmit.
+ if (!PacketSize) {
+ if (pMds->ScanTxPause) //No management frames to transmit.
break; //The scanning is progressing, so stop the data
//frames transmission
PacketFrom = 3;
@@ -109,7 +109,7 @@ Mds_Tx(PADAPTER Adapter)
//
BufferFilled = TRUE;
- DESCRIPTOR_RESET( pTxDes );
+ DESCRIPTOR_RESET(pTxDes);
TxDesIndex = pMds->TxDesIndex;//Get the current ID
DESCRIPTOR_SET_ID( pTxDes, TxDesIndex );
pMds->TxDesFrom[ TxDesIndex ] = PacketFrom;//Storing the information of source comming from
@@ -145,10 +145,10 @@ Mds_Tx(PADAPTER Adapter)
}
// Copy (fragment) frame body, and set USB, 802.11 hdr flag
- CurrentSize = Mds_BodyCopy( Adapter, pTxDes, XmitBufAddress );
+ CurrentSize = Mds_BodyCopy(Adapter, pTxDes, XmitBufAddress);
// Set RTS/CTS and Normal duration field into buffer
- Mds_DurationSet( Adapter, pTxDes, XmitBufAddress );
+ Mds_DurationSet(Adapter, pTxDes, XmitBufAddress);
//
// Calculation MIC from buffer which maybe fragment, then fill into temporary address 8 byte
@@ -161,20 +161,18 @@ Mds_Tx(PADAPTER Adapter)
XmitBufAddress += CurrentSize;
#ifdef _IBSS_BEACON_SEQ_STICK_
- if( (XmitBufAddress[ DOT_11_DA_OFFSET+8 ] & 0xfc) != MAC_SUBTYPE_MNGMNT_PROBE_REQUEST ) // +8 for USB hdr
+ if ((XmitBufAddress[ DOT_11_DA_OFFSET+8 ] & 0xfc) != MAC_SUBTYPE_MNGMNT_PROBE_REQUEST) // +8 for USB hdr
#endif
- pMds->TxToggle = TRUE;
+ pMds->TxToggle = TRUE;
//---------------------
//Check Power save
if (psSME->bDesiredPowerSave) {
if ((psLOCAL->wConnectedSTAindex == 0) ||
((psLOCAL->wConnectedSTAindex != 0) &&
- (psBSS(psLOCAL->wConnectedSTAindex)->bBssType == ESS_NET)))
- {
+ (psBSS(psLOCAL->wConnectedSTAindex)->bBssType == ESS_NET))) {
psLOCAL->boHasTxActivity = 1;
- if (psLOCAL->iPowerSaveMode == PWR_SAVE)
- {
+ if (psLOCAL->iPowerSaveMode == PWR_SAVE) {
K_MSG sSmeMsg;
u8 PsMode;
@@ -208,11 +206,10 @@ Mds_Tx(PADAPTER Adapter)
// Software TSC count 20060214
pMds->TxTsc++;
- if( pMds->TxTsc == 0 )
+ if (pMds->TxTsc == 0)
pMds->TxTsc_2++;
FillCount++; // 20060928
-
} while (HAL_USB_MODE_BURST(pHwData)); // End of multiple MSDU copy loop. FALSE = single TRUE = multiple sending
// Move to the next one, if necessary
@@ -229,8 +226,7 @@ Mds_Tx(PADAPTER Adapter)
pMds->TxFillIndex++;
pMds->TxFillIndex %= MAX_USB_TX_BUFFER_NUMBER;
BufferFilled = FALSE;
- }
- else
+ } else
break;
if (!PacketSize) // No more pk for transmitting
@@ -249,7 +245,7 @@ Mds_Tx(PADAPTER Adapter)
}
void
-Mds_SendComplete( PADAPTER Adapter, PT02_DESCRIPTOR pT02 )
+Mds_SendComplete(PADAPTER Adapter, PT02_DESCRIPTOR pT02)
{
PMDS pMds = &Adapter->Mds;
phw_data_t pHwData = &Adapter->sHwData;
@@ -258,30 +254,26 @@ Mds_SendComplete( PADAPTER Adapter, PT
unsigned char SendOK = TRUE;
u8 RetryCount, TxRate;
K_MSG sSmeMsg;
- u16 wIndex, wReasonCode;
+ u16 wIndex, wReasonCode;
- if( pT02->T02_IgnoreResult ) // Donot care the result
+ if (pT02->T02_IgnoreResult) // Don't care the result
return;
#ifdef _PE_TX_DUMP_
WBDEBUG(("### Tx complete, PacketId =%x, pT02->T02_Tx_PktID =%x\n",
PacketId, pT02->T02_Tx_PktID));
#endif
- if( pT02->T02_IsLastMpdu )
- {
+ if (pT02->T02_IsLastMpdu) {
//TODO: DTO -- get the retry count and fragment count
// Tx rate
- //TxRate = pMds->TxRate[ PacketId ][ pT02->T02_effective_transmission_rate ];
TxRate = pMds->TxRate[ PacketId ][ 0 ];
RetryCount = (u8)pT02->T02_MPDU_Cnt;
- if( pT02->value & FLAG_ERROR_TX_MASK )
- {
+ if (pT02->value & FLAG_ERROR_TX_MASK) {
SendOK = FALSE;
#ifdef _PE_DTO_DUMP_
WBDEBUG(("Mds Tx Fail[%d] = %8x\n", PacketId, pT02->value ));
#endif
- if (pT02->T02_transmit_abort || pT02->T02_out_of_MaxTxMSDULiftTime)
- {
+ if (pT02->T02_transmit_abort || pT02->T02_out_of_MaxTxMSDULiftTime) {
//retry error
pHwData->dto_tx_retry_count += (RetryCount+1);
//[for tx debug]
@@ -305,9 +297,7 @@ Mds_SendComplete( PADAPTER Adapter, PT
pHwData->tx_WepOn_false_count++;
if (pT02->T02_discard_due_to_null_wep_key)
pHwData->tx_Null_key_count++;
- }
- else
- {
+ } else {
if (pT02->T02_effective_transmission_rate)
pHwData->tx_ETR_count++;
MTO_SetTxCount(Adapter, TxRate, RetryCount);
@@ -321,29 +311,21 @@ Mds_SendComplete( PADAPTER Adapter, PT
else if( pMds->TxDesFrom[ PacketId ] == 1 )
{ COMPLETE_DESCRIPTOR_FIRST( Adapter, PacketId, SendOK ); }
- //DataDmp( pMds->TxBuffer[PacketId], 50, 0);
//The next 802.1x message callback after 2 MIC error occur within 60s
//TODO: ?? Don't care whether the next 802.1x message is transmitted successfully??
- //if (Adapter->Mds.boCounterMeasureBlock &&
- //8byte USB + 24byte 802.11Hdr + 6 byte EAPOL packet type
- // (*((u16 *)(pMds->TxBuffer[PacketId]+38)) == 0x8e88))
- if (pMds->TxInfo[PacketId] == 1)
- {
- //It needs to send disassoc. frame no matter the connection is still
- //alive or not(AP disassoc. us).
+ if (pMds->TxInfo[PacketId] == 1) {
+ // It needs to send disassoc. frame no matter the connection is still
+ // alive or not(AP disassoc. us).
#ifdef _PE_STATE_DUMP_
WBDEBUG(("!!Countermeasure, disassoc !!\n"));
#endif
pMds->TxInfo[PacketId] = 0;
- if (CURRENT_LINK_ON)
- {
+ if (CURRENT_LINK_ON) {
wReasonCode = REASON_MIC_ERROR;
sSmeMsg.wMsgType = SMEMSG_DISASSOC_REQ;
sSmeMsg.pMsgPtr = &wReasonCode;
SME_Entry(Adapter, &sSmeMsg);
- }
- else
- {
+ } else {
//Maybe AP has disassoc. us firstly, but we still need send it.
pTxBuffer = pMds->pTxBuffer + (MAX_USB_TX_BUFFER * PacketId); //Get buffer
wIndex = wBSSfindBssID( Adapter, pTxBuffer+12 );
@@ -352,20 +334,13 @@ Mds_SendComplete( PADAPTER Adapter, PT
}
// Clear send result buffer
pMds->TxResult[ PacketId ] = 0;
- }
- else
+ } else
pMds->TxResult[ PacketId ] |= ((u16)(pT02->value & 0x0ffff));
-
-
-// 20060928 Remove
-// // Start the next send
-// Mds_Tx( Adapter );
}
void
-Mds_HeaderCopy( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer )
+Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer)
{
-// phw_data_t pHwData = &Adapter->sHwData;
PMDS pMds = &Adapter->Mds;
PUCHAR src_buffer = pDes->buffer_address[0];//931130.5.g
PUCHAR buffer;
@@ -401,8 +376,7 @@ Mds_HeaderCopy( PADAPTER Adapter, PDES
//
// Header convert from 802.3 to 802.11
//
- if( DESCRIPTOR_GET_TYPE( pDes ) == FRAME_TYPE_802_3_DATA )
- {
+ if (DESCRIPTOR_GET_TYPE( pDes ) == FRAME_TYPE_802_3_DATA) {
// Setting 802.11 Frame control 2 byte
buffer = TargetBuffer; // Reserved for USB header
*buffer = 0x08;// Data type
@@ -416,8 +390,7 @@ Mds_HeaderCopy( PADAPTER Adapter, PDES
if( src_buffer[0] & 0x1 ) // belong to Group address in DA field. Do not fragment.
FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
- switch( CURRENT_BSS_TYPE )
- {
+ switch (CURRENT_BSS_TYPE) {
case IBSS_NET:
//Copy DA-SA
memcpy( buffer, src_buffer, DOT_3_TYPE_OFFSET );
@@ -640,8 +613,7 @@ Mds_HeaderCopy( PADAPTER Adapter, PDES
pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1;
- for( i=0; i<2; i++ )
- {
+ for( i=0; i<2; i++ ) {
if( i == 1 )
ctmp1 = ctmpf;
@@ -679,7 +651,7 @@ Mds_HeaderCopy( PADAPTER Adapter, PDES
// The function return the 4n size of usb pk
u16
-Mds_BodyCopy( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer )
+Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer)
{
PT00_DESCRIPTOR pT00;
PMDS pMds = &Adapter->Mds;
@@ -697,10 +669,6 @@ Mds_BodyCopy( PADAPTER Adapter, PDESCR
pT00 = (PT00_DESCRIPTOR)buffer;
while( SizeLeft )
{
-//950301 delete due to HW
-// // 931130.5.l
-// OS_ATOMIC_INC( Adapter, &pMds->TxConcurrentCount );
-
pT00 = (PT00_DESCRIPTOR)buffer;
CopySize = SizeLeft;
if( SizeLeft > DESCRIPTOR_GET_FRAGMENT_THRESHOLD(pDes) )
@@ -1108,10 +1076,8 @@ void MDS_SendResult( PADAPTER Adapter,
void MDS_EthernetPacketReceive( PADAPTER Adapter, PRXLAYER1 pRxLayer1 )
{
#ifdef WB_LINUX_WPA_PSK
-// PUCHAR BufAddr, pctmp;
-// u16 BufSize, stmp;
- PUCHAR pctmp;
- u16 stmp;
+ PUCHAR pctmp;
+ u16 stmp;
pctmp = pRxLayer1->BufferQueue[0].pBufferAddress + 12;
stmp = pctmp[0] << 8;
stmp |= pctmp[1];
diff --git a/drivers/net/wireless/winbond/winbondport/mlme_assoc.c b/drivers/net/wireless/winbond/winbondport/mlme_assoc.c
index 41e204e..38041a2 100644
--- a/drivers/net/wireless/winbond/winbondport/mlme_assoc.c
+++ b/drivers/net/wireless/winbond/winbondport/mlme_assoc.c
@@ -30,14 +30,14 @@ #include "os_common.h"
//============================================================================
s8 SendAssociationRequest(PWB32_ADAPTER Adapter,
u16 iMSindex,
- unsigned char Reasso)
+ unsigned char Reasso)
{
u16 iFildOffset = 0;
u8 *msg;
struct Management_Frame* msgHeader;
- struct Association_Request_Frame_Body* msgBody;
+ struct Association_Request_Frame_Body* msgBody;
- // Get the free data buffer
+ // Get the free data buffer
if ((msg = MLMEGetMMPDUBuffer(Adapter)) == NULL)
{ // No available data buffer now. Stop sending the MMPDU.
Adapter->sMlmeFrame.wNumTxMMPDUDiscarded++;
@@ -60,20 +60,14 @@ s8 SendAssociationRequest(PWB32_ADAPTER
msgHeader->frame_control.WEP = 0;
msgHeader->duration = 0; // Set by the MDS
- #ifdef _PE_TX_DUMP_
- //WBDEBUG(("addr of DA =%p\n", msgHeader->DA));
- //WBDEBUG(("addr of SA =%p\n", msgHeader->SA));
- //WBDEBUG(("addr of BSSID =%p\n", msgHeader->BSSID));
- #endif
memcpy( msgHeader->DA, psBSS(iMSindex)->abPeerAddress, MAC_ADDR_LENGTH );
memcpy( msgHeader->SA, psLOCAL->ThisMacAddress, MAC_ADDR_LENGTH );
memcpy( msgHeader->BSSID, psBSS(iMSindex)->abBssID, MAC_ADDR_LENGTH );
- // HW-MAC automatically generates the frame sequence number
- // MDS automatically generates the fragment number.
+ // HW-MAC automatically generates the frame sequence number
+ // MDS automatically generates the fragment number.
// now set the associtaion request information
- //20060926 add by anson's endian
msgBody->capability_information = cpu_to_le16( psSME->wCapabilityInfo );
msgBody->listenInterval = cpu_to_le16( psLOCAL->ListenInterval );
if(Reasso)
diff --git a/drivers/net/wireless/winbond/winbondport/mlmetxrx.c b/drivers/net/wireless/winbond/winbondport/mlmetxrx.c
index af043a3..85fc635 100644
--- a/drivers/net/wireless/winbond/winbondport/mlmetxrx.c
+++ b/drivers/net/wireless/winbond/winbondport/mlmetxrx.c
@@ -51,7 +51,9 @@ void MLMEResetTxRx(PWB32_ADAPTER Adapter
// NULL : No available data buffer available
// Otherwise: Pointer to the data buffer
//=============================================================================
-u8 *MLMEGetMMPDUBuffer( PWB32_ADAPTER Adapter)
+
+/* FIXME: Should this just be replaced with kmalloc() and kfree()? */
+u8 *MLMEGetMMPDUBuffer(PWB32_ADAPTER Adapter)
{
s32 i;
u8 *returnVal;
@@ -69,10 +71,7 @@ u8 *MLMEGetMMPDUBuffer( PWB32_ADAPTER Ad
}
//=============================================================================
-u8 MLMESendFrame( PWB32_ADAPTER Adapter,
- u8 *pMMPDU,
- u16 len,
- u8 DataType)
+u8 MLMESendFrame(PWB32_ADAPTER Adapter, u8 *pMMPDU, u16 len, u8 DataType)
/* DataType : FRAME_TYPE_802_11_MANAGEMENT, FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE,
FRAME_TYPE_802_11_DATA */
{
@@ -100,39 +99,37 @@ #endif
}
void
-MLME_GetNextPacket( PADAPTER Adapter, PDESCRIPTOR pDes )
+MLME_GetNextPacket(PADAPTER Adapter, PDESCRIPTOR pDes)
{
DESCRIPTOR_ADD_BUFFER( pDes, Adapter->sMlmeFrame.pMMPDU, Adapter->sMlmeFrame.len );
DESCRIPTOR_SET_TYPE( pDes, Adapter->sMlmeFrame.DataType );
}
-void MLMEfreeMMPDUBuffer( PWB32_ADAPTER Adapter, PCHAR pData)
+void MLMEfreeMMPDUBuffer(PWB32_ADAPTER Adapter, PCHAR pData)
{
int i;
- // Reclaim the data buffer
- for (i = 0; i < MAX_NUM_TX_MMPDU; i++)
- {
- if (pData == (PCHAR)&(Adapter->sMlmeFrame.TxMMPDU[i]))
- break;
- }
- if (Adapter->sMlmeFrame.TxMMPDUInUse[i])
- Adapter->sMlmeFrame.TxMMPDUInUse[i] = FALSE;
- else {
- // Something wrong
- // PD43 Add debug code here???
- }
-
+ // Reclaim the data buffer
+ for (i = 0; i < MAX_NUM_TX_MMPDU; i++) {
+ if (pData == (PCHAR)&(Adapter->sMlmeFrame.TxMMPDU[i]))
+ break;
+ }
+ if (Adapter->sMlmeFrame.TxMMPDUInUse[i])
+ Adapter->sMlmeFrame.TxMMPDUInUse[i] = FALSE;
+ else {
+ // Something wrong
+ // PD43 Add debug code here???
+ }
}
void
-MLME_SendComplete( PADAPTER Adapter, u8 PacketID, unsigned char SendOK )
+MLME_SendComplete(PADAPTER Adapter, u8 PacketID, unsigned char SendOK)
{
- MLME_TXCALLBACK TxCallback;
- K_MSG sMlmeMsg;
- u8 DataTmp[200];
+ MLME_TXCALLBACK TxCallback;
+ K_MSG sMlmeMsg;
+ u8 DataTmp[200];
- memcpy( DataTmp, Adapter->sMlmeFrame.pMMPDU, Adapter->sMlmeFrame.len );
+ memcpy(DataTmp, Adapter->sMlmeFrame.pMMPDU, Adapter->sMlmeFrame.len);
#ifdef _PE_TX_DUMP_
WBDEBUG(( "dump tx callback, len=%d\n", Adapter->sMlmeFrame.len ));
DataDmp( Adapter->sMlmeFrame.pMMPDU, Adapter->sMlmeFrame.len, 0 );
diff --git a/drivers/net/wireless/winbond/winbondport/rxisr.c b/drivers/net/wireless/winbond/winbondport/rxisr.c
index f1397b1..e05f12f 100644
--- a/drivers/net/wireless/winbond/winbondport/rxisr.c
+++ b/drivers/net/wireless/winbond/winbondport/rxisr.c
@@ -91,47 +91,38 @@ void Mds_MsduProcess( PWB32_ADAPTER Ada
u8 LastBufIdx;
// Is management frame??
- if( pRxLayer1->FrameType != MAC_TYPE_DATA ) {
+ if (pRxLayer1->FrameType != MAC_TYPE_DATA) {
// Call MLME function
- MLMERcvFrame( Adapter, pRxLayer1->BufferQueue, pRxLayer1->BufferNumber, SlotIndex );//The last parameter is needed for SME.
+ MLMERcvFrame(Adapter, pRxLayer1->BufferQueue, pRxLayer1->BufferNumber, SlotIndex); //The last parameter is needed for SME.
return;
}
// Checking this packet(802.3), if valid for Filter. Just discard the frame if the media is disconnected.
- if (!CURRENT_LINK_ON)
+ if (!CURRENT_LINK_ON)
return;
- pDFrame = (struct Data_Frame*)pRxLayer1->BufferQueue[0].pBufferAddress;
- Temp = (*(PUSHORT)pRxLayer1->BufferQueue[0].pBufferAddress); //anson's endian
- memcpy( &frame_control, &Temp, sizeof(u16) ); // YY's endian
+ pDFrame = (struct Data_Frame*) pRxLayer1->BufferQueue[0].pBufferAddress;
+ Temp = (*(PUSHORT)pRxLayer1->BufferQueue[0].pBufferAddress);
+ memcpy( &frame_control, &Temp, sizeof(u16) );
WEPed = frame_control.WEP ? TRUE : FALSE;
if( (!WEPed && !MLMEGetExcludeUnencrypted(Adapter)) ||
- (WEPed && Adapter->sSmePara._dot11PrivacyOptionImplemented != FALSE) ) {
- //TODO: check if there is a MIC err
+ (WEPed && Adapter->sSmePara._dot11PrivacyOptionImplemented != FALSE)) {
+ // TODO: check if there is a MIC err
/**/
- if( WEPed && (pRxLayer1->DecryptionMethod==2) ) //TKIP
- {
- if ((pDFrame->Addr1[0] & 1) == 0)
- {
- if (psSME->pairwise_key_ok)
- {
+ if (WEPed && (pRxLayer1->DecryptionMethod==2)) { //TKIP
+ if ((pDFrame->Addr1[0] & 1) == 0) {
+ if (psSME->pairwise_key_ok) {
mic_key = psSME->rx_mic_key;
}
- }
- else
- {
+ } else {
#ifdef _PE_RX_DUMP_
WBDEBUG(("Receive broadcast/multicast packet.\n"));
#endif
}
- if (mic_key == NULL)
- {
- if (psSME->group_key_ok)
- {
+ if (mic_key == NULL) {
+ if (psSME->group_key_ok) {
mic_key = psSME->group_rx_mic_key;
- }
- else
- {
+ } else {
#ifdef _PE_RX_DUMP_
WBDEBUG(("No key available to decrypt this packet.\n"));
#endif
@@ -141,7 +132,6 @@ void Mds_MsduProcess( PWB32_ADAPTER Ada
Mds_MicGet( Adapter, pRxLayer1, mic_key, mic );
- //WBDEBUG(("mic value :\n"));
//DataDmp(mic, 8, 0);
//WBDEBUG(("MICKEY = " MICKEYSTR "\n", MICKEY2STR(psSME->rx_mic_key)));
// #ifdef _PE_RX_DUMP_
@@ -155,79 +145,29 @@ void Mds_MsduProcess( PWB32_ADAPTER Ada
pframe_mic = (PUCHAR)pRxLayer1->BufferQueue[ LastBufIdx ].pBufferAddress;
pframe_mic += pRxLayer1->BufferQueue[LastBufIdx].BufferSize - 8;
- if( memcmp( pframe_mic, mic, 8 ) == 0 )
- {
-// u8 *DataPtr = (u8 *)pDFrame + 24; // + 24 byte header
-// u8 TscValue[6];
-// int j;
-/*
- //TKIP Replay protection
- TscValue[0] = DataPtr[2];
- TscValue[1] = DataPtr[0];
- TscValue[2] = DataPtr[4];
- TscValue[3] = DataPtr[5];
- TscValue[4] = DataPtr[6];
- TscValue[5] = DataPtr[7];
- j = 5;
- if ((pDFrame->Addr1[0] & 1) == 0)
- {
- while (TscValue[i] <= psBSS(SlotIndex)->PairwiseTSC[j])
- {
- j--;
- if (i<0)
- break;
- }
- if (i>=0)
- memcpy(psBSS(SlotIndex)->PairwiseTSC, TscValue, 6);
- else
- {
- WBDEBUG(("pairwise replay\n"));
- return;//replay
- }
- }
- else//group
- {
- while (TscValue[j] <= psBSS(SlotIndex)->GroupTSC[j])
- {
- j--;
- if (j<0)
- break;
- }
- if (j>=0)
- memcpy(psBSS(SlotIndex)->GroupTSC, TscValue, 6);
- else
- {
- WBDEBUG(("group replay\n"));
- return;//replay
- }
- }
-*/
+ if (memcmp( pframe_mic, mic, 8) == 0) {
//exclude the MIC
pRxLayer1->BufferQueue[ LastBufIdx ].BufferSize -= 8;
- }
- else
- {
+ } else {
WBDEBUG(("!!!!!! MIC error !!!!!!\n"));
#ifdef NDIS51_MINIPORT
if (mic_key == psSME->rx_mic_key)
{ MDS_EVENT_INDICATE( Adapter,
- psBSS(Adapter->sLocalPara.wConnectedSTAindex)->abBssID,
- AUTH_REQUEST_PAIRWISE_ERROR ); }
+ psBSS(Adapter->sLocalPara.wConnectedSTAindex)->abBssID,
+ AUTH_REQUEST_PAIRWISE_ERROR ); }
else
{ MDS_EVENT_INDICATE( Adapter,
- psBSS(Adapter->sLocalPara.wConnectedSTAindex)->abBssID,
- AUTH_REQUEST_GROUP_ERROR ); }
+ psBSS(Adapter->sLocalPara.wConnectedSTAindex)->abBssID,
+ AUTH_REQUEST_GROUP_ERROR ); }
Adapter->Mds.bMICfailCount++;
- if (Adapter->Mds.bMICfailCount == 1)
- {
- vRxTimerStart(Adapter, 60000);//60s
+ if (Adapter->Mds.bMICfailCount == 1) {
+ vRxTimerStart(Adapter, 60000); //60s
}
- if (Adapter->Mds.bMICfailCount == 2)
- {
+ if (Adapter->Mds.bMICfailCount == 2) {
Adapter->Mds.boCounterMeasureBlock = 1;
#ifdef _PE_RX_DUMP_
WBDEBUG(("!!!!!! Countermeasure Block !!!!!!\n"));
@@ -249,20 +189,19 @@ void Mds_MsduProcess( PWB32_ADAPTER Ada
// Updating the MSDU counter 'GS_RCV_OK'
MIB_GS_RCV_OK_INC;
- //Get the Source address
+ // Get the Source address
SourceAddress = pDFrame->Addr3;
- if( !frame_control.from_ds )
+ if (!frame_control.from_ds)
SourceAddress = pDFrame->Addr2;
BufSize = pRxLayer1->BufferQueue[0].BufferSize;
BufAddr = pRxLayer1->BufferQueue[0].pBufferAddress;
- //Point to the frame body
+ // Point to the frame body
BufAddr += (DOT_11_TYPE_OFFSET - ETH_LENGTH_OF_ADDRESS); // offset 24 is 4n alignment @@
// PD43 20021220 Added for Type/Length encapsulation adjust
- // YY's endian
- if( *(PULONG)BufAddr==cpu_to_le32(0x0003aaaa) && // little endian // @@ 4n alignment here
+ if (*(PULONG)BufAddr==cpu_to_le32(0x0003aaaa) && // little endian // @@ 4n alignment here
*(PULONG)(BufAddr+4)!=cpu_to_le32(0x37810000) && //PD43 20030418 Modified for HCT 11 // @@ 4n alignment here
(*(PUSHORT)(BufAddr+4)==0 || *(PUSHORT)(BufAddr+4)==cpu_to_le16(0xf800)) ) // @@ 4n alignment here
{
@@ -270,9 +209,7 @@ void Mds_MsduProcess( PWB32_ADAPTER Ada
// Do nothing here
pRxLayer1->TypeEncapsulated = TRUE;
pRxLayer1->BufferQueue[0].BufferSize -= 18;
- }
- else
- {
+ } else {
// Converted to Length-encapsulated 802.3 frame.
// Reserved 2 bytes for length field.
BufAddr -= (2 + ETH_LENGTH_OF_ADDRESS);
@@ -289,11 +226,9 @@ void Mds_MsduProcess( PWB32_ADAPTER Ada
pRxLayer1->BufferQueue[0].pBufferAddress = BufAddr;
// Is 802.3 frame format?
- if( !pRxLayer1->TypeEncapsulated )
- {
+ if (!pRxLayer1->TypeEncapsulated) {
_8023FrameSize = 0; // PD43 20021220 Added
- for( i=0; i<pRxLayer1->BufferNumber; i++ )
- {
+ for (i=0; i<pRxLayer1->BufferNumber; i++) {
BufSize = pRxLayer1->BufferQueue[i].BufferSize;
_8023FrameSize += BufSize;
}
@@ -306,12 +241,10 @@ void Mds_MsduProcess( PWB32_ADAPTER Ada
}
// Indicate to Upper Module
- MDS_EthernetPacketReceive( Adapter, pRxLayer1 );
- Adapter->sLocalPara._NumRxMSDU ++;// A packet be indicated
- }
- else
- {
- if( !WEPed )
+ MDS_EthernetPacketReceive(Adapter, pRxLayer1);
+ Adapter->sLocalPara._NumRxMSDU++; // A packet be indicated
+ } else {
+ if (!WEPed)
Adapter->sLocalPara._dot11WEPExcludedCount ++;
else
Adapter->sLocalPara._dot11WEPUndecryptableCount ++;
diff --git a/drivers/net/wireless/winbond/winbondport/scan_probe.c b/drivers/net/wireless/winbond/winbondport/scan_probe.c
index 1adaef5..aaf9442 100644
--- a/drivers/net/wireless/winbond/winbondport/scan_probe.c
+++ b/drivers/net/wireless/winbond/winbondport/scan_probe.c
@@ -17,41 +17,39 @@ #include "os_common.h"
//============================================================================
int SendProbeRequest(PWB32_ADAPTER Adapter, struct SSID_Element *SSID)
{
+ struct Management_Frame* msgHeader;
+ PUCHAR msg;
+ u16 iCurrentLocation = 0;
+ u8 BasicRate[8], OpRate[MAX_OPT_RATE_SET], BasicRateCount, OpRateCount;
+ u8 i, j, BitIndex;
+ u32 BasicRateBitmap, OpRateBitmap, tmp;
- struct Management_Frame* msgHeader;
- PUCHAR msg;
- u16 iCurrentLocation = 0;
- u8 BasicRate[8], OpRate[MAX_OPT_RATE_SET], BasicRateCount, OpRateCount;
- u8 i, j, BitIndex;
- u32 BasicRateBitmap, OpRateBitmap, tmp;
-
- // Get the free data buffer
- if ((msg = MLMEGetMMPDUBuffer(Adapter)) == NULL)
- {
- // No available data buffer now. Stop send the MMPDU.
+ // Get the free data buffer
+ if ((msg = MLMEGetMMPDUBuffer(Adapter)) == NULL) {
+ // No available data buffer now. Stop send the MMPDU.
Adapter->sMlmeFrame.wNumTxMMPDUDiscarded++;
- return -1;
- }
+ return -1;
+ }
msgHeader = (struct Management_Frame*) &msg[0];
// first setup the frame_control header
msgHeader->frame_control.mac_frame_info = MAC_SUBTYPE_MNGMNT_PROBE_REQUEST;
- msgHeader->frame_control.to_ds = 0; // = 0 for management frame
- msgHeader->frame_control.from_ds = 0; // = 0 for management frame
- msgHeader->frame_control.more_frag = 0;
+ msgHeader->frame_control.to_ds = 0; // = 0 for management frame
+ msgHeader->frame_control.from_ds = 0; // = 0 for management frame
+ msgHeader->frame_control.more_frag = 0;
msgHeader->frame_control.retry = 0;
- msgHeader->frame_control.more_data = 0;
+ msgHeader->frame_control.more_data = 0;
msgHeader->frame_control.order = 0;
- msgHeader->frame_control.pwr_mgt = 0;
- msgHeader->frame_control.WEP = 0;
- msgHeader->duration = 0; // Set by the MDS
+ msgHeader->frame_control.pwr_mgt = 0;
+ msgHeader->frame_control.WEP = 0;
+ msgHeader->duration = 0; // Set by the MDS
// now do the addresses
- memcpy( msgHeader->DA, "\xff\xff\xff\xff\xff\xff", MAC_ADDR_LENGTH );
+ memcpy( msgHeader->DA, "\xff\xff\xff\xff\xff\xff", MAC_ADDR_LENGTH );
memcpy( msgHeader->SA, Adapter->sLocalPara.ThisMacAddress, MAC_ADDR_LENGTH );
memcpy( msgHeader->BSSID, psSCAN->BSSID, MAC_ADDR_LENGTH );
- msgHeader->Sequence_Control = 0; //Will be filled by HW-MAC
+ msgHeader->Sequence_Control = 0; //Will be filled by HW-MAC
iCurrentLocation = sizeof(struct Management_Frame);
@@ -60,27 +58,21 @@ int SendProbeRequest(PWB32_ADAPTER Adapt
iCurrentLocation += (SSID->Length+2);
// now do the supported rates
- //11G TODO:
- if (psLOCAL->bMacOperationMode == MODE_802_11_A)
- {
+ if (psLOCAL->bMacOperationMode == MODE_802_11_A) {
BasicRateBitmap = LOCAL_11A_BASIC_RATE_BITMAP;
OpRateBitmap = LOCAL_11A_OPERATION_RATE_BITMAP;
}
- else if (psLOCAL->bMacOperationMode == MODE_802_11_B)
- {
+ else if (psLOCAL->bMacOperationMode == MODE_802_11_B) {
BasicRateBitmap = LOCAL_11B_BASIC_RATE_BITMAP;
OpRateBitmap = LOCAL_11B_OPERATION_RATE_BITMAP;
- }
- else
- {
+ } else {
BasicRateBitmap = LOCAL_11G_BASIC_RATE_BITMAP;
OpRateBitmap = LOCAL_11G_OPERATION_RATE_BITMAP;
}
i = j = 0;
- for (BitIndex=0 ; BitIndex<32; BitIndex++)
- {
+ for (BitIndex=0 ; BitIndex<32; BitIndex++) {
tmp = 1<<BitIndex;
if (BasicRateBitmap&tmp)
BasicRate[i++] = 0x80 | bBitmapToRate(BitIndex);
@@ -91,22 +83,18 @@ int SendProbeRequest(PWB32_ADAPTER Adapt
OpRateCount = j;
DesiredRate2InfoElement(Adapter, msg, &iCurrentLocation,
- BasicRate, BasicRateCount,
- OpRate, OpRateCount);
+ BasicRate, BasicRateCount,
+ OpRate, OpRateCount);
- // 20061108 WPS IE append if necessary
- if( psLOCAL->IE_Append_size )
- {
- memcpy( &msg[iCurrentLocation], psLOCAL->IE_Append_data, psLOCAL->IE_Append_size );
+ if( psLOCAL->IE_Append_size ) {
+ memcpy(&msg[iCurrentLocation], psLOCAL->IE_Append_data, psLOCAL->IE_Append_size);
iCurrentLocation += psLOCAL->IE_Append_size;
}
- // now send this message out
- if (1 == MLMESendFrame( Adapter,
- (u8 *)&msg[0],
- iCurrentLocation,
- FRAME_TYPE_802_11_MANAGEMENT))
- return 1; // Has sent to the Tx handler.
+ // now send this message out
+ if (1 == MLMESendFrame(Adapter, (u8 *)&msg[0], iCurrentLocation,
+ FRAME_TYPE_802_11_MANAGEMENT))
+ return 1; // Has sent to the Tx handler.
else
{
//return MLME buffer
diff --git a/drivers/net/wireless/winbond/winbondport/scantask.c b/drivers/net/wireless/winbond/winbondport/scantask.c
index a414c85..d64db2b 100644
--- a/drivers/net/wireless/winbond/winbondport/scantask.c
+++ b/drivers/net/wireless/winbond/winbondport/scantask.c
@@ -20,10 +20,8 @@ static void vScanProc_ActiveNextChannel(
void vScanTimerStart(PWB32_ADAPTER Adapter, int timeout_value);
void vScanTimerStop(PWB32_ADAPTER Adapter);
void ScanTimerHandler_1a( void* Data);
-void ScanTimerHandler( void* SystemSpecific1,
- PWB32_ADAPTER Adapter,
- void* SystemSpecific2,
- void* SystemSpecific3);
+void ScanTimerHandler(void* SystemSpecific1, PWB32_ADAPTER Adapter,
+ void* SystemSpecific2, void* SystemSpecific3);
u16 wRetrieveInformation(PWB32_ADAPTER Adapter, u16 index, psRXDATA psRxFrame);
void StartIbssCheck(PWB32_ADAPTER Adapter, u16 wBssIdx);
@@ -39,7 +37,6 @@ static void vScanProc_StopScan(PWB32_ADA
static void vScanProc_RcvProbeRsp(PWB32_ADAPTER Adapter, K_MSG* psMsg);
static void vScanProc_RcvBeacon(PWB32_ADAPTER Adapter, K_MSG* psMsg);
//Never used nowdays
-//static void vScanProc_TxProbeFail(PWB32_ADAPTER Adapter, K_MSG* psMsg);
static void vStart_BgScanTimer(PWB32_ADAPTER Adapter, K_MSG* psMsg);
static void vStart_BgScan(PWB32_ADAPTER Adapter, K_MSG* psMsg);
@@ -209,28 +206,21 @@ void vScanProc_ActiveNextChannel(PWB32_A
{
psSCAN->wState = SCAN_COMPLETE;
//Decide the best antenna
- if (psLOCAL->wConnectedSTAindex == 0)
- {
+ if (psLOCAL->wConnectedSTAindex == 0) {
if (psSCAN->RxNumPerAntenna[0] > psSCAN->RxNumPerAntenna[1])
BestAntenna = 0;
else
BestAntenna = 1;
- //WBDEBUG(("Rx at Antenna 0 =%d, Rx at Antenna 1 =%d\n",
- // psSCAN->RxNumPerAntenna[0], psSCAN->RxNumPerAntenna[1]));
- //WBDEBUG(("The best antenna is %d\n", BestAntenna));
- if( Adapter->sLocalPara.boAntennaDiversity ) // 20060613.5 Add
- {
- if (psLOCAL->bAntennaNo != BestAntenna)
- {
+
+ if (Adapter->sLocalPara.boAntennaDiversity) {
+ if (psLOCAL->bAntennaNo != BestAntenna) {
psLOCAL->bAntennaNo = BestAntenna;
hal_set_antenna_number(&Adapter->sHwData, psLOCAL->bAntennaNo);
}
}
}
//for BG-scan to return to the channel of connected STA
- //if ((i=psLOCAL->wConnectedSTAindex) != 0)
- if ((i=psSME->wDesiredJoinBSS) != 0)
- {
+ if ((i=psSME->wDesiredJoinBSS) != 0) {
ChanInfo ChanTmp;
ChanTmp.band = psBSS(i)->band;
@@ -308,9 +298,6 @@ void vScanTimerStart(PWB32_ADAPTER Adapt
void vScanTimerStop(PWB32_ADAPTER Adapter)
{
-
- //psSCAN->boTimerActive = FALSE; // can be removed
- ///NdisMCancelTimer(&psSCAN->nTimer, &boValue);
OS_TIMER_CANCEL( &psSCAN->nTimer, &boValue );
#ifdef _PE_STATE_DUMP_
WBDEBUG(("STATE: scan cancel timer return valule =%x\n", boValue));
@@ -323,15 +310,13 @@ void ScanTimerHandler_1a( void* Data)
ScanTimerHandler(NULL, (PWB32_ADAPTER)Data, NULL, NULL);
}
-void ScanTimerHandler( void* SystemSpecific1,
- PWB32_ADAPTER Adapter,
- void* SystemSpecific2,
- void* SystemSpecific3)
+void ScanTimerHandler(void* SystemSpecific1, PWB32_ADAPTER Adapter,
+ void* SystemSpecific2, void* SystemSpecific3)
{
K_MSG sTimerMsg;
psSCAN->boInTimerHandler = TRUE;
- sTimerMsg.wMsgType = SCANMSG_TIMEOUT;
+ sTimerMsg.wMsgType = SCANMSG_TIMEOUT;
sTimerMsg.pMsgPtr = NULL;
Scan_Entry(Adapter, &sTimerMsg);
psSCAN->boInTimerHandler = FALSE;
@@ -513,24 +498,19 @@ void vScanProc_StopScan(PWB32_ADAPTER Ad
WBDEBUG(("-----------STATE: STOP Scan--------------\n"));
#endif
- //hal_set_accept_beacon(&Adapter->sHwData, FALSE);
vScanTimerStop(Adapter);
- //Adapter->Mds.TxPause = FALSE; // Enable Tx frame
- //Adapter->Mds.ScanTxPause = FALSE;
+
psSCAN->wState = SCAN_COMPLETE;
hal_scan_status_indicate(&Adapter->sHwData, 0); // complete
- if (psMsg->pMsgPtr != NULL) //come from Disassoc request
- {
+ if (psMsg->pMsgPtr != NULL) { //come from Disassoc request
sSmeMsg.wMsgType = SMEMSG_SCAN_CFM;
sSmeMsg.wInstance = 0;
sSmeMsg.pMsgPtr = NULL;
SME_Entry(Adapter, &sSmeMsg);
- }
- else
- {
+ } else {
Adapter->Mds.TxPause = FALSE; // Enable Tx frame
Adapter->Mds.ScanTxPause = FALSE;
- //restart HWMAC Tx frame
+ // restart HWMAC Tx frame
hal_start_tx0(&Adapter->sHwData);
}
}
@@ -582,8 +562,6 @@ void vScanProc_RcvProbeRsp(PWB32_ADAPTER
void vScanProc_RcvBeacon(PWB32_ADAPTER Adapter, K_MSG* psMsg)
{
u16 wBssIdx;
- //u32 dwData;
- //u8 BSSID[MAC_ADDR_LENGTH];
phw_data_t pHwData = &Adapter->sHwData;
#ifdef _PE_RX_DUMP_
@@ -696,8 +674,8 @@ void vStart_BgScan(PWB32_ADAPTER Adapter
if (psSME->bDesiredPowerSave)
{
if ((psLOCAL->wConnectedSTAindex == 0) ||
- ((psLOCAL->wConnectedSTAindex != 0) &&
- (psBSS(psLOCAL->wConnectedSTAindex)->bBssType == ESS_NET)))
+ ((psLOCAL->wConnectedSTAindex != 0) &&
+ (psBSS(psLOCAL->wConnectedSTAindex)->bBssType == ESS_NET)))
{
K_MSG sSmeMsg;
u8 PsMode;
@@ -718,8 +696,7 @@ void vStart_BgScan(PWB32_ADAPTER Adapter
psSCAN->AntennaToggle = 0;
hal_set_current_channel(&Adapter->sHwData, psSCANREQ->sChannelList.Channel[0]);
psSCAN->iCurrentChannelIndex = 0;
- if (psSCANREQ->ScanType == ACTIVE_SCAN)
- {
+ if (psSCANREQ->ScanType == ACTIVE_SCAN) {
K_MSG sTimerMsg;
Adapter->Mds.ScanTxPause = TRUE;
@@ -729,29 +706,13 @@ void vStart_BgScan(PWB32_ADAPTER Adapter
//vScanTimerStart(Adapter, (int)(psSCAN->ProbeDelay/1000));
psSCAN->wState = WAIT_PROBE_DELAY;
-
-
- sTimerMsg.wMsgType = SCANMSG_TIMEOUT;
+ sTimerMsg.wMsgType = SCANMSG_TIMEOUT;
sTimerMsg.pMsgPtr = NULL;
Scan_Entry(Adapter, &sTimerMsg);
-
- }
- else //(psSCAN->bScanType == PASSIVE_SCAN)
- { // NOTE: complete BG-Scan, should tune Chan to CONNECTED Chan
+ } else { // NOTE: complete BG-Scan, should tune Chan to CONNECTED Chan
Adapter->Mds.TxPause = TRUE; // Start BG scan,stop Tx
//hal_set_accept_beacon(&Adapter->sHwData, TRUE);
vScanTimerStart(Adapter, psSCAN->MaxChannelTime);
psSCAN->wState = WAIT_BEACON_MAX_PASSIVE;
}
}
-
-/*
-void vScanProc_TxProbeFail(PWB32_ADAPTER Adapter, K_MSG* psMsg)
-{
- if (psSCANREQ->ScanType == ACTIVE_SCAN)
- {
- vScanTimerStart(Adapter, (int)(psSCAN->ProbeDelay/1000));
- psSCAN->wState = WAIT_PROBE_DELAY;
- }
-}
-*/
diff --git a/drivers/net/wireless/winbond/winbondport/wbhal.c b/drivers/net/wireless/winbond/winbondport/wbhal.c
index f1912e0..6599538 100644
--- a/drivers/net/wireless/winbond/winbondport/wbhal.c
+++ b/drivers/net/wireless/winbond/winbondport/wbhal.c
@@ -2,7 +2,7 @@ #include "os_common.h"
-void hal_start_tx0( phw_data_t pHwData )
+void hal_start_tx0(phw_data_t pHwData)
{
if (!pHwData->SurpriseRemove)
Wb35Tx_start( pHwData );
@@ -85,7 +85,7 @@ unsigned char hal_set_mapping_key( phw_d
Wb35Reg_Write( pHwData, 0x0840, pWb35Reg->M40_MacControl );
// Set key table contain
- OS_MEMORY_CLEAR( Key_content, sizeof(KEY_TABLE)+ 16 + 8 ); // 8 bytes for burst writing
+ memset(Key_content, 0, sizeof(KEY_TABLE)+ 16 + 8); // 8 bytes for burst writing
pKey = (PKEY_TABLE)(Key_content + 4 ); // Space 4 byte for burst command
pValue = (u8 *)pKey;
@@ -341,27 +341,26 @@ void hal_clear_all_key( phw_data_t pHwDa
Wb35Reg_BurstWrite( pHwData, 0x081c, pltmp+16, MAX_KEY_TABLE-16, NO_INCREMENT );
memset( pHwData->Key_slot[0], 0, MAX_KEY_TABLE*8 ); // 20060214 for recover
}
-//---------------------------------------------------------------------------------------------------
+
void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address )
{
if( pHwData->SurpriseRemove ) return;
memcpy( current_address, pHwData->CurrentMacAddress, ETH_LENGTH_OF_ADDRESS );
}
-//---------------------------------------------------------------------------------------------------
+
void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address )
{
- u32 ltmp[2]; //20060926 add by anson's endian
+ u32 ltmp[2];
if( pHwData->SurpriseRemove ) return;
memcpy( pHwData->CurrentMacAddress, current_address, ETH_LENGTH_OF_ADDRESS );
- //--- 20060926 add by anson's endian
+
ltmp[0]= cpu_to_le32( *(PULONG)pHwData->CurrentMacAddress );
ltmp[1]= cpu_to_le32( *(PULONG)(pHwData->CurrentMacAddress + 4) ) & 0xffff;
- //--- end 20060926 add by anson's endia
- //Wb35Reg_BurstWrite( pHwData,0x03e8, (PULONG)pHwData->CurrentMacAddress, 2, AUTO_INCREMENT );
- Wb35Reg_BurstWrite( pHwData,0x03e8, ltmp, 2, AUTO_INCREMENT ); //20060926 add by anson's endian
+
+ Wb35Reg_BurstWrite( pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT );
}
void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address )
@@ -418,8 +417,8 @@ u8 hal_init_hardware(phw_data_t pHwData,
return FALSE;
}
-//-------------------------------------------------------------------------------
-void hal_halt( phw_data_t pHwData, void *ppa_data )
+
+void hal_halt( phw_data_t pHwData, void *ppa_data)
{
switch( pHwData->InitialResource )
{
@@ -433,9 +432,8 @@ void hal_halt( phw_data_t pHwData, voi
}
}
-//--------------------------------------------------------------------------------
void
-hal_set_power_save_mode( phw_data_t pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim )
+hal_set_power_save_mode(phw_data_t pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim )
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
u32 Value;
@@ -443,7 +441,6 @@ hal_set_power_save_mode( phw_data_t pHw
if( pHwData->SurpriseRemove ) return;
// Power save setting
- //pHwData->desired_power_save = power_save;
pWb35Reg->M24_MacControl &= ~0x0200c000; //clear ps-poll and pwr active/save bits
if (power_save) {
@@ -479,7 +476,7 @@ void hal_get_power_save_mode( phw_data_
Wb35Reg_Read( pHwData, 0x084c, &pWb35Reg->M4C_MacStatus );
pHwData->power_save_point = pin_pwr_save;
}
-//---------------------------------------------------------------------------------------------------
+
void hal_set_slot_time( phw_data_t pHwData, u8 type )
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
@@ -728,8 +725,8 @@ void hal_set_cap_info( phw_data_t pHwDa
pWb35Reg->M38_MacControl |= tmp;
Wb35Reg_Write( pHwData, 0x0838, pWb35Reg->M38_MacControl );
}
-//---------------------------------------------------------------------------------------------------
-void hal_set_ssid( phw_data_t pHwData, PUCHAR pssid, u8 ssid_len )
+
+void hal_set_ssid(phw_data_t pHwData, PUCHAR pssid, u8 ssid_len)
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
u32 pltmp[9]; // 1 burst command + 8 DW SSID max
@@ -742,7 +739,6 @@ void hal_set_ssid( phw_data_t pHwData,
memset( (PUCHAR)pltmp, 0, 36 );
//NOTE [WK endian]: ssid values will be tranfered by cpu_to_le32 in Wb35Reg_BurstWrite().
// The ssid values must be tranfered first but burst cmd is not necessary.
- //memcpy( (PUCHAR)(pltmp+1), pssid, ssid_len );
pHwData->ssid_length = ssid_len;
@@ -784,7 +780,6 @@ void hal_set_current_channel_ex( phw_da
void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel )
{
PADAPTER Adapter = pHwData->Adapter;
-// PTESTSTA pTestSta = &Adapter->sTestSta;
if( TS_RUNNING_IN_TESTSTA_MODE )
return; // Ignore setting if access right is not owned by NDIS
@@ -811,7 +806,7 @@ void hal_set_accept_broadcast( phw_data
Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
}
-//---------------------------------------------------------------------------------------------------
+
//for wep key error detection, we need to accept broadcast packets to be received temporary.
void hal_set_accept_promiscuous( phw_data_t pHwData, u8 enable)
{
@@ -826,7 +821,7 @@ void hal_set_accept_promiscuous( phw_dat
Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
}
}
-//---------------------------------------------------------------------------------------------------
+
void hal_set_accept_multicast( phw_data_t pHwData, u8 enable )
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
@@ -837,7 +832,7 @@ void hal_set_accept_multicast( phw_data
if (enable) pWb35Reg->M00_MacControl |= 0x01000000;//The HW value
Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
}
-//---------------------------------------------------------------------------------------------------
+
void hal_set_accept_beacon( phw_data_t pHwData, u8 enable )
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
@@ -889,32 +884,30 @@ u8 hal_get_accept_beacon( phw_data_t pH
else
return 0;
}
-//---------------------------------------------------------------------------------------------------
+
unsigned char hal_reset_hardware( phw_data_t pHwData, void* ppa )
{
// Not implement yet
return TRUE;
}
-//---------------------------------------------------------------------------------------------------
+
void hal_stop( phw_data_t pHwData )
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
- pHwData->Wb35Rx.rx_halt = 1; // 20051222.3 Move here for supriseremove
+ pHwData->Wb35Rx.rx_halt = 1;
Wb35Rx_stop( pHwData );
pHwData->Wb35Tx.tx_halt = 1;
Wb35Tx_stop( pHwData );
-// if( pHwData->SurpriseRemove ) return;
-
pWb35Reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off
Wb35Reg_Write( pHwData, 0x0400, pWb35Reg->D00_DmaControl );
WbUsb_Stop( pHwData ); // 20051230 Add.4
}
-//---------------------------------------------------------------------------------------------------
-unsigned char hal_idle( phw_data_t pHwData )
+
+unsigned char hal_idle(phw_data_t pHwData)
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
PWBUSB pWbUsb = &pHwData->WbUsb;
@@ -948,52 +941,51 @@ void hal_set_cwmax( phw_data_t pHwData,
pWb35Reg->M2C_MacControl |= pHwData->cwmax;
Wb35Reg_Write( pHwData, 0x082c, pWb35Reg->M2C_MacControl );
}
-//----------------------------------------------------------------------------------------------------
+
void hal_set_rsn_wpa( phw_data_t pHwData, u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type, unsigned char bDesiredAuthMode)
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ PWB35REG pWb35Reg = &pHwData->Wb35Reg;
u32 pltmp[2];
if( pHwData->SurpriseRemove ) return;
- #ifdef _PE_STATE_DUMP_
- WBDEBUG(("[WS]hal_set_rsn_wpa\n"));
- WBDEBUG(("[WS]hal_RSN_IE_Bitmap=%x\n",*RSN_IE_Bitmap));
- WBDEBUG(("[WS]hal_RSN_OUI_type=%x\n",*RSN_OUI_type));
- #endif
+#ifdef _PE_STATE_DUMP_
+ WBDEBUG(("[WS]hal_set_rsn_wpa\n"));
+ WBDEBUG(("[WS]hal_RSN_IE_Bitmap=%x\n",*RSN_IE_Bitmap));
+ WBDEBUG(("[WS]hal_RSN_OUI_type=%x\n",*RSN_OUI_type));
+#endif
- pWb35Reg->M24_MacControl &= ~0x500000;
- switch (bDesiredAuthMode)
+ pWb35Reg->M24_MacControl &= ~0x500000;
+ switch (bDesiredAuthMode)
{
- case OPEN_AUTH:
- case SHARE_AUTH:break;
-
- case WPA_AUTH:
- case WPAPSK_AUTH:
- case WPANONE_AUTH:
- pWb35Reg->M24_MacControl |= 0x500000;
- break;
- #ifdef _WPA2_
- case WPA2_AUTH:
- case WPA2PSK_AUTH:
- pWb35Reg->M24_MacControl |= 0x100000;
- break;
- #endif //_WPA2_
+ case OPEN_AUTH:
+ case SHARE_AUTH:break;
+
+ case WPA_AUTH:
+ case WPAPSK_AUTH:
+ case WPANONE_AUTH:
+ pWb35Reg->M24_MacControl |= 0x500000;
+ break;
+#ifdef _WPA2_
+ case WPA2_AUTH:
+ case WPA2PSK_AUTH:
+ pWb35Reg->M24_MacControl |= 0x100000;
+ break;
+#endif //_WPA2_
- default:
- break;
+ default:
+ break;
}
Wb35Reg_Write( pHwData, 0x0824, pWb35Reg->M24_MacControl );
- //pWb35Reg->M24_MacControl = 0x00140042;
+ //pWb35Reg->M24_MacControl = 0x00140042;
memcpy( &pltmp[0], RSN_IE_Bitmap, sizeof(u32) );
memcpy( &pltmp[1], RSN_OUI_type, sizeof(u32) );
pWb35Reg->M70_MacControl = pltmp[0];
pWb35Reg->M74_MacControl = pltmp[1];
Wb35Reg_BurstWrite( pHwData, 0x0870, pltmp, 2, AUTO_INCREMENT );
}
-//----------------------------------------------------------------------------------------------------
-//s32 hal_get_rssi( phw_data_t pHwData, u32 HalRssi )
+
s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count )
{
PWB35REG pWb35Reg = &pHwData->Wb35Reg;
@@ -1444,17 +1436,17 @@ void hal_set_radio_mode( phw_data_t pHwD
Wb35Reg_Write( pHwData, 0x0824, pWb35Reg->M24_MacControl );
}
-void hal_descriptor_indicate( phw_data_t pHwData, PDESCRIPTOR pRxDes )
+void hal_descriptor_indicate(phw_data_t pHwData, PDESCRIPTOR pRxDes)
{
PADAPTER Adapter = pHwData->Adapter;
- if( !pHwData->IsInitOK ) // 20060717.3 Add
+ if (!pHwData->IsInitOK)
return;
- if( TS_RUNNING_IN_TESTSTA_MODE )
- { TS_MpduProcess( Adapter, pRxDes ); }
+ if (TS_RUNNING_IN_TESTSTA_MODE)
+ { TS_MpduProcess(Adapter, pRxDes); }
else
- { Mds_MpduProcess( Adapter, pRxDes ); }
+ { Mds_MpduProcess(Adapter, pRxDes); } /* Ouch, MpduProcess has three parameters but we only pass two?! */
}
u8 hal_get_antenna_number( phw_data_t pHwData )
diff --git a/drivers/net/wireless/winbond/winbondport/wbhal_s.h b/drivers/net/wireless/winbond/winbondport/wbhal_s.h
index df61e3e..345a03d 100644
--- a/drivers/net/wireless/winbond/winbondport/wbhal_s.h
+++ b/drivers/net/wireless/winbond/winbondport/wbhal_s.h
@@ -25,7 +25,7 @@ #define hal_join_OK( _H ) \
K_MSG sSmeMsg;\
sSmeMsg.wMsgType = SMEMSG_TSF_SYNC_IND;\
sSmeMsg.wInstance = 0;\
- sSmeMsg.pMsgPtr = NULL;\
+ sSmeMsg.pMsgPtr = NULL;\
SME_Entry( _H->Adapter, &sSmeMsg);\
}
@@ -40,31 +40,7 @@ #define hal_set_chan_complete( _A, _B )
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////////////////////////
//================================================================================================
// Common define
//================================================================================================
@@ -74,12 +50,12 @@ #define HAL_USB_MODE_BURST( _H ) (_H->So
#define SCAN_MAX_CHNL_TIME (50)
// For TxL2 Frame typr recognise
-#define FRAME_TYPE_802_3_DATA 0
-#define FRAME_TYPE_802_11_MANAGEMENT 1
+#define FRAME_TYPE_802_3_DATA 0
+#define FRAME_TYPE_802_11_MANAGEMENT 1
#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
-#define FRAME_TYPE_802_11_CONTROL 3
-#define FRAME_TYPE_802_11_DATA 4
-#define FRAME_TYPE_PROMISCUOUS 5
+#define FRAME_TYPE_802_11_CONTROL 3
+#define FRAME_TYPE_802_11_DATA 4
+#define FRAME_TYPE_PROMISCUOUS 5
// The follow definition is used for convert the frame--------------------
#define DOT_11_SEQUENCE_OFFSET 22 //Sequence control offset
@@ -113,16 +89,14 @@ #define HAL_KEYTYPE_TKIP
#define HAL_KEYTYPE_AES_CCMP 3 // 128 bit key
// For VM state
-enum
-{
+enum {
VM_STOP = 0,
VM_RUNNING,
VM_COMPLETED
};
// Be used for 802.11 mac header
-typedef struct _MAC_FRAME_CONTROL
-{
+typedef struct _MAC_FRAME_CONTROL {
u8 mac_frame_info; // this is a combination of the protovl version, type and subtype
u8 to_ds:1;
u8 from_ds:1;
@@ -385,10 +359,9 @@ typedef struct _T02_DESCRIPTOR
};
} T02_DESCRIPTOR, *PT02_DESCRIPTOR;
-typedef struct _DESCRIPTOR // Skip length = 8 DWORD
-{
+typedef struct _DESCRIPTOR { // Skip length = 8 DWORD
// ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition
- u8 Descriptor_ID;// 931130.4.p
+ u8 Descriptor_ID;
//----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------
u8 RESERVED[3];
@@ -446,7 +419,7 @@ typedef struct _DESCRIPTOR // Skip leng
//=======================================================
// Common operation for DESCRIPTOR
//=======================================================
-#define DESCRIPTOR_RESET( _D ) OS_MEMORY_CLEAR( (PUCHAR)_D + 1, sizeof(DESCRIPTOR) - 1 )
+#define DESCRIPTOR_RESET( _D ) memset((PUCHAR)_D + 1, 0, sizeof(DESCRIPTOR) - 1)
#define DESCRIPTOR_ADD_BUFFER( _D, _A, _S ) \
{\
_D->InternalUsed = _D->buffer_start_index + _D->buffer_number; \
diff --git a/drivers/net/wireless/winbond/winbondport/wblinux.c b/drivers/net/wireless/winbond/winbondport/wblinux.c
index 27dcca0..0b0b200 100644
--- a/drivers/net/wireless/winbond/winbondport/wblinux.c
+++ b/drivers/net/wireless/winbond/winbondport/wblinux.c
@@ -22,9 +22,9 @@ WBLINUX_MemoryAlloc(void* *VirtualAddres
}
s32
-EncapAtomicInc( PADAPTER Adapter, void* pAtomic )
+EncapAtomicInc(PADAPTER Adapter, void* pAtomic)
{
- PWBLINUX pWbLinux = &Adapter->WbLinux;
+ PWBLINUX pWbLinux = &Adapter->WbLinux;
u32 ltmp;
PULONG pltmp = (PULONG)pAtomic;
OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock );
@@ -35,20 +35,20 @@ EncapAtomicInc( PADAPTER Adapter, void
}
s32
-EncapAtomicDec( PADAPTER Adapter, void* pAtomic )
+EncapAtomicDec(PADAPTER Adapter, void* pAtomic)
{
- PWBLINUX pWbLinux = &Adapter->WbLinux;
- u32 ltmp;
- PULONG pltmp = (PULONG)pAtomic;
- OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock );
- (*pltmp)--;
- ltmp = (*pltmp);
- OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock );
- return ltmp;
+ PWBLINUX pWbLinux = &Adapter->WbLinux;
+ u32 ltmp;
+ PULONG pltmp = (PULONG)pAtomic;
+ OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock );
+ (*pltmp)--;
+ ltmp = (*pltmp);
+ OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock );
+ return ltmp;
}
unsigned char
-WBLINUX_Initial( PADAPTER Adapter )
+WBLINUX_Initial(PADAPTER Adapter)
{
PWBLINUX pWbLinux = &Adapter->WbLinux;
@@ -112,7 +112,7 @@ int wb35_start_xmit(struct sk_buff *skb,
PADAPTER Adapter = netdev->priv;
PWBLINUX pWbLinux = &Adapter->WbLinux;
PUCHAR pBufAddress = (PUCHAR)skb->data;
- unsigned char IsStop = FALSE;
+ unsigned char IsStop = FALSE;
#ifdef _PE_TX_DUMP_
WBDEBUG(( "[w35und]wb35_start_xmit->\n" ));
@@ -163,94 +163,91 @@ #endif
// Calling Mds for sending packet --------------------
Adapter->sLocalPara._NumTxMSDU++;
netdev->trans_start=jiffies;
- Mds_Tx( Adapter );
+ Mds_Tx(Adapter);
return 0;// return 1 if asking kernel retry to send sk-buffer.
}
void
-WBLINUX_GetNextPacket( PADAPTER Adapter, PDESCRIPTOR pDes )
+WBLINUX_GetNextPacket(PADAPTER Adapter, PDESCRIPTOR pDes)
{
- PWBLINUX pWbLinux = &Adapter->WbLinux;
- struct sk_buff *pSkb;
- u8 *pSkbBuffer;
- int buf_size;
-
- //Get a Linux packet to transmit
- pSkb = pWbLinux->skb_array[ pWbLinux->skb_GetIndex ];
- pWbLinux->skb_array[ pWbLinux->skb_GetIndex ] = NULL;
-
- // Move the point to the next
- pWbLinux->skb_GetIndex++;
- pWbLinux->skb_GetIndex %= WBLINUX_PACKET_ARRAY_SIZE;
-
- //================================================================================
- // Fill the related information into descriptor //
- //================================================================================
- pWbLinux->packet_return = pSkb;
- pSkbBuffer = pSkb->data;
- buf_size = pSkb->len;
- pWbLinux->stats.tx_packets++; // 20060331 move here
- pWbLinux->stats.tx_bytes += buf_size; // 20060331 move here
-
- //931130.5.t
- // +------------+
- // | header + 2 | <-- DA + SA + T/L
- // +------------+
- // +-------------------------------+
- // | data |
- // +-------------------------------+
- // :
- // :
- //
- DESCRIPTOR_ADD_BUFFER( pDes, pSkbBuffer, DOT_3_TYPE_OFFSET+2 );
- buf_size -= (DOT_3_TYPE_OFFSET+2);
- pSkbBuffer += (DOT_3_TYPE_OFFSET+2);
-
- if( buf_size )// Add the left data 931130.5.v
- DESCRIPTOR_ADD_BUFFER( pDes, pSkbBuffer, (u16)buf_size );
+ PWBLINUX pWbLinux = &Adapter->WbLinux;
+ struct sk_buff *pSkb;
+ u8 *pSkbBuffer;
+ int buf_size;
+
+ //Get a Linux packet to transmit
+ pSkb = pWbLinux->skb_array[ pWbLinux->skb_GetIndex ];
+ pWbLinux->skb_array[ pWbLinux->skb_GetIndex ] = NULL;
+
+ // Move the point to the next
+ pWbLinux->skb_GetIndex++;
+ pWbLinux->skb_GetIndex %= WBLINUX_PACKET_ARRAY_SIZE;
+
+ //================================================================================
+ // Fill the related information into descriptor //
+ //================================================================================
+ pWbLinux->packet_return = pSkb;
+ pSkbBuffer = pSkb->data;
+ buf_size = pSkb->len;
+ pWbLinux->stats.tx_packets++; // 20060331 move here
+ pWbLinux->stats.tx_bytes += buf_size; // 20060331 move here
+
+ //931130.5.t
+ // +------------+
+ // | header + 2 | <-- DA + SA + T/L
+ // +------------+
+ // +-------------------------------+
+ // | data |
+ // +-------------------------------+
+ // :
+ // :
+ //
+ DESCRIPTOR_ADD_BUFFER( pDes, pSkbBuffer, DOT_3_TYPE_OFFSET+2 );
+ buf_size -= (DOT_3_TYPE_OFFSET+2);
+ pSkbBuffer += (DOT_3_TYPE_OFFSET+2);
+
+ if (buf_size)
+ DESCRIPTOR_ADD_BUFFER( pDes, pSkbBuffer, (u16)buf_size );
}
void
- WBLINUX_GetNextPacketCompleted( PADAPTER Adapter, PDESCRIPTOR pDes )
+WBLINUX_GetNextPacketCompleted(PADAPTER Adapter, PDESCRIPTOR pDes)
{
- PWBLINUX pWbLinux = &Adapter->WbLinux;
- s32 room_space = 0;
- struct sk_buff *pSkb;
- unsigned char IsStart = FALSE;
-
- // Return the send result to LINUX
- pSkb = pWbLinux->packet_return;
- pWbLinux->packet_return = NULL;
- if( in_irq() )
- dev_kfree_skb_irq( pSkb );
- else
- dev_kfree_skb( pSkb );
- MIB_GS_XMIT_OK_INC;
-
- // Trying to wakeup the netif if necessary
- if( pWbLinux->netif_state_stop )
- {
- room_space = pWbLinux->skb_GetIndex - pWbLinux->skb_SetIndex;
- if( room_space < 0 ) // Ex: + + G + S + + +
- room_space += WBLINUX_PACKET_ARRAY_SIZE;
+ PWBLINUX pWbLinux = &Adapter->WbLinux;
+ s32 room_space = 0;
+ struct sk_buff *pSkb;
+ unsigned char IsStart = FALSE;
+
+ // Return the send result to LINUX
+ pSkb = pWbLinux->packet_return;
+ pWbLinux->packet_return = NULL;
+ if (in_irq())
+ dev_kfree_skb_irq(pSkb);
+ else
+ dev_kfree_skb(pSkb);
+ MIB_GS_XMIT_OK_INC;
+
+ // Trying to wakeup the netif if necessary
+ if (pWbLinux->netif_state_stop) {
+ room_space = pWbLinux->skb_GetIndex - pWbLinux->skb_SetIndex;
+ if (room_space < 0) // Ex: + + G + S + + +
+ room_space += WBLINUX_PACKET_ARRAY_SIZE;
- OS_SPIN_LOCK_ACQUIRED( &pWbLinux->SpinLock );
- if( pWbLinux->netif_state_stop )
- {
- pWbLinux->netif_state_stop = 0;
- IsStart = TRUE;
- }
- OS_SPIN_LOCK_RELEASED( &pWbLinux->SpinLock );
+ OS_SPIN_LOCK_ACQUIRED( &pWbLinux->SpinLock );
+ if (pWbLinux->netif_state_stop) {
+ pWbLinux->netif_state_stop = 0;
+ IsStart = TRUE;
+ }
+ OS_SPIN_LOCK_RELEASED( &pWbLinux->SpinLock );
- if( IsStart )
- {
+ if (IsStart) {
#ifdef _PE_TX_DUMP_
- WBDEBUG(("[w35und] tx netif start---"));
+ WBDEBUG(("[w35und] tx netif start---"));
#endif
- netif_wake_queue( pWbLinux->netdev );
- }
- }
+ netif_wake_queue( pWbLinux->netdev );
+ }
+ }
}
struct net_device_stats * wb35_netdev_stats( struct net_device *netdev )
@@ -305,84 +302,77 @@ #endif
}
void
- WBLINUX_Destroy( PADAPTER Adapter )
+WBLINUX_Destroy(PADAPTER Adapter)
{
- PWBLINUX pWbLinux = &Adapter->WbLinux;
+ PWBLINUX pWbLinux = &Adapter->WbLinux;
- DEBUG2("UNregistering....\n");
+ DEBUG2("UNregistering....\n");
- WBLINUX_stop( Adapter );
- OS_SPIN_LOCK_FREE( &pWbNdis->SpinLock );
- unregister_netdev( pWbLinux->netdev );
+ WBLINUX_stop( Adapter );
+ OS_SPIN_LOCK_FREE( &pWbNdis->SpinLock );
+ unregister_netdev( pWbLinux->netdev );
#ifdef _PE_USB_INI_DUMP_
- WBDEBUG(("[w35und] unregister_netdev!\n"));
+ WBDEBUG(("[w35und] unregister_netdev!\n"));
#endif
}
void
- WBLINUX_stop( PADAPTER Adapter )
+WBLINUX_stop( PADAPTER Adapter )
{
- PWBLINUX pWbLinux = &Adapter->WbLinux;
- struct sk_buff *pSkb;
-
- if( OS_ATOMIC_INC( Adapter, &pWbLinux->ThreadCount ) == 1 )
- {
- // Shutdown module immediately
- pWbLinux->shutdown = 1;
+ PWBLINUX pWbLinux = &Adapter->WbLinux;
+ struct sk_buff *pSkb;
+
+ if (OS_ATOMIC_INC( Adapter, &pWbLinux->ThreadCount ) == 1) {
+ // Shutdown module immediately
+ pWbLinux->shutdown = 1;
+
+ while (pWbLinux->skb_array[ pWbLinux->skb_GetIndex ]) {
+ // Trying to free the un-sending packet
+ pSkb = pWbLinux->skb_array[ pWbLinux->skb_GetIndex ];
+ pWbLinux->skb_array[ pWbLinux->skb_GetIndex ] = NULL;
+ if( in_irq() )
+ dev_kfree_skb_irq( pSkb );
+ else
+ dev_kfree_skb( pSkb );
- while( pWbLinux->skb_array[ pWbLinux->skb_GetIndex ] )
- {
- // Trying to free the un-sending packet
- pSkb = pWbLinux->skb_array[ pWbLinux->skb_GetIndex ];
- pWbLinux->skb_array[ pWbLinux->skb_GetIndex ] = NULL;
- if( in_irq() )
- dev_kfree_skb_irq( pSkb );
- else
- dev_kfree_skb( pSkb );
-
- pWbLinux->skb_GetIndex++;
- pWbLinux->skb_GetIndex %= WBLINUX_PACKET_ARRAY_SIZE;
- }
+ pWbLinux->skb_GetIndex++;
+ pWbLinux->skb_GetIndex %= WBLINUX_PACKET_ARRAY_SIZE;
+ }
#ifdef _PE_STATE_DUMP_
- WBDEBUG(( "[w35und] SKB_RELEASE OK\n" ));
+ WBDEBUG(( "[w35und] SKB_RELEASE OK\n" ));
#endif
- }
+ }
- OS_ATOMIC_DEC( Adapter, &pWbLinux->ThreadCount );
+ OS_ATOMIC_DEC( Adapter, &pWbLinux->ThreadCount );
}
void
- WbWlanHalt( PADAPTER Adapter )
+WbWlanHalt( PADAPTER Adapter )
{
- //netif_stop_queue(Priv.udev);
- //---------------------
- Adapter->sLocalPara.ShutDowned = TRUE;
- //WbNdis51_destroy( Adapter );
-
- Mds_Destroy( Adapter );
+ //---------------------
+ Adapter->sLocalPara.ShutDowned = TRUE;
- // Halt
- Roam_Halt(Adapter);
- SCAN_Halt(Adapter);
- MLME_Halt(Adapter);
- SME_Halt(Adapter);
+ Mds_Destroy( Adapter );
- // For Ts module unload
- //TS_destroy( Adapter );
+ // Halt
+ Roam_Halt(Adapter);
+ SCAN_Halt(Adapter);
+ MLME_Halt(Adapter);
+ SME_Halt(Adapter);
- // Turn off Rx and Tx hardware ability
- hal_stop( &Adapter->sHwData );
+ // Turn off Rx and Tx hardware ability
+ hal_stop( &Adapter->sHwData );
#ifdef _PE_USB_INI_DUMP_
- WBDEBUG(("[w35und] Hal_stop O.K.\n"));
+ WBDEBUG(("[w35und] Hal_stop O.K.\n"));
#endif
- OS_SLEEP(100000);// Waiting Irp completed
+ OS_SLEEP(100000);// Waiting Irp completed
- // Destroy the NDIS module
- WBLINUX_Destroy( Adapter );
+ // Destroy the NDIS module
+ WBLINUX_Destroy( Adapter );
- // Halt the HAL
- hal_halt(&Adapter->sHwData, NULL);
+ // Halt the HAL
+ hal_halt(&Adapter->sHwData, NULL);
}
unsigned char
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 535407d..150daa7 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1496,6 +1496,7 @@ static inline ieee80211_txrx_result __ie
for (handler = handlers; *handler != NULL; handler++) {
res = (*handler)(rx);
+ printk("handler %x result %d\n", handler, res);
switch (res) {
case TXRX_CONTINUE:
@@ -1730,6 +1731,11 @@ static void __ieee80211_rx_handle_packet
rx.fc = le16_to_cpu(hdr->frame_control);
type = rx.fc & IEEE80211_FCTL_FTYPE;
+ if (type == IEEE80211_FTYPE_MGMT)
+ printk("management frame\n");
+ if (type == IEEE80211_FTYPE_DATA)
+ printk("data frame\n");
+
if (type == IEEE80211_FTYPE_DATA || type == IEEE80211_FTYPE_MGMT)
local->dot11ReceivedFragmentCount++;
@@ -1740,6 +1746,7 @@ static void __ieee80211_rx_handle_packet
}
if ((status->flag & RX_FLAG_MMIC_ERROR)) {
+ printk("mic error\n");
ieee80211_rx_michael_mic_report(local->mdev, hdr, sta, &rx);
goto end;
}
@@ -1752,6 +1759,7 @@ static void __ieee80211_rx_handle_packet
goto end;
skb = rx.skb;
+ printk("handlers did not like it\n");
if (sta && !(sta->flags & (WLAN_STA_WDS | WLAN_STA_ASSOC_AP)) &&
!atomic_read(&local->iff_promiscs) &&
!is_multicast_ether_addr(hdr->addr1)) {
@@ -1762,6 +1770,7 @@ static void __ieee80211_rx_handle_packet
return;
}
+ printk("searching monitors\n");
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (!netif_running(sdata->dev))
continue;
@@ -2020,6 +2029,7 @@ void __ieee80211_rx(struct ieee80211_hw
struct ieee80211_local *local = hw_to_local(hw);
u32 pkt_load;
+ printk("_rx\n");
/*
* key references and virtual interfaces are protected using RCU
* and this requires that we are in a read-side RCU section during
@@ -2038,12 +2048,15 @@ void __ieee80211_rx(struct ieee80211_hw
rcu_read_unlock();
return;
}
+ printk("_rx_monitor passed\n");
pkt_load = ieee80211_rx_load_stats(local, skb, status);
local->channel_use_raw += pkt_load;
- if (!ieee80211_rx_reorder_ampdu(local, skb))
+ if (!ieee80211_rx_reorder_ampdu(local, skb)) {
+ printk("_rx_reorder_ampdu passed\n");
__ieee80211_rx_handle_packet(hw, skb, status, pkt_load);
+ }
rcu_read_unlock();
}
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists