| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080416180231.GA27292@linuxace.com>
Date: Wed, 16 Apr 2008 11:02:31 -0700
From: Phil Oester <kernel@...uxace.com>
To: linux-kernel@...r.kernel.org
Cc: muli@...ibm.com, jeff@...zik.org
Subject: [PATCH] Add back bfsort quirks when ACPI enabled
commit fc5429f0838782acdfc5d2c6ab54a07951ea8ab2
Author: Phil Oester <kernel@...uxace.com>
Date: Wed Apr 16 13:45:35 2008 -0400
In commit 08f1c192c3c32797068bfe97738babb3295bbf42 (x86-64: introduce
struct pci_sysdata to facilitate sharing of ->sysdata), a change was
made from using pcibios_scan_root to pci_scan_bus_parented. At this
point, various quirks applied in pciprobe_dmi_table were no longer
applied if ACPI was enabled. This caused various devices to reverse
their probe order between .22 and .23.
The patch below simply copies the quirks from pciprobe_dmi_table to
acpi_pciprobe_dmi_table so they will be applied again. This makes
probe order return to pre-23 behavior. Not the most elegant solution
to have the quirks in two places, but better than the current backwards
ordering.
Signed-off-by: Phil Oester <kernel@...uxace.com>
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 378136f..0689408 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -42,6 +42,190 @@ static struct dmi_system_id acpi_pciprobe_dmi_table[] __devinitdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
},
},
+#ifdef __i386__
+/*
+ * Laptops which need pci=assign-busses to see Cardbus cards
+ */
+ {
+ .callback = assign_all_busses,
+ .ident = "Samsung X20 Laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
+ },
+ },
+ {
+ .callback = assign_all_busses,
+ .ident = "Compaq EVO N800c",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
+ },
+ },
+#endif /* __i386__ */
+/*
+ * Systems requiring breadth-first PCI scanning
+ */
+ {
+ .callback = set_bf_sort,
+ .ident = "Dell PowerEdge 1950",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "Dell PowerEdge 1955",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "Dell PowerEdge 2900",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "Dell PowerEdge 2950",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "Dell PowerEdge R900",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL20p G3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL20p G4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL30p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL25p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL35p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL45p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL45p G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL460c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL465c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL480c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL685c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant DL385 G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant DL585 G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant DL385 G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant DL585 G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ },
+ },
{}
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists