Message-Id: <20080417081106.aab87b1a.randy.dunlap@oracle.com>
Date:	Thu, 17 Apr 2008 08:11:06 -0700
From:	Randy Dunlap <randy.dunlap@...cle.com>
To:	Avi Kivity <avi@...ranet.com>
Cc:	kvm-devel@...ts.sourceforge.net, linux-kernel@...r.kernel.org,
	Carsten Otte <cotte@...ibm.com>
Subject: Re: [PATCH 13/45] KVM: s390: API documentation

On Thu, 17 Apr 2008 12:10:18 +0300 Avi Kivity wrote:

> From: Carsten Otte <cotte@...ibm.com>
> 
> This patch adds Documentation/s390/kvm.txt, which describes specifics of kvm's
> user interface that are unique to s390 architecture.
> 
> Signed-off-by: Carsten Otte <cotte@...ibm.com>
> Signed-off-by: Avi Kivity <avi@...ranet.com>
> ---
>  Documentation/s390/kvm.txt |  125 ++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 125 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/s390/kvm.txt
> 
> diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt
> new file mode 100644
> index 0000000..6f5ceb0
> --- /dev/null
> +++ b/Documentation/s390/kvm.txt
> @@ -0,0 +1,125 @@
> +*** BIG FAT WARNING ***
> +The kvm module is currently in EXPERIMENTAL state for s390. This means that
> +the interface to the module is not yet considered to remain stable. Thus, be
> +prepared that we keep breaking your userspace application and guest
> +compatibility over and over again until we feel happy with the result. Make sure
> +your guest kernel, your host kernel, and your userspace launcher are in a
> +consistent state.
> +
> +This Documentation describes the unique ioctl calls to /dev/kvm, the resulting
> +kvm-vm file descriptors, and the kvm-vcpu file descriptors that differ from x86.
> +
> +1. ioctl calls to /dev/kvm
> +KVM does support the following ioctls on s390 that are common with other
> +architectures and do behave the same:
> +KVM_GET_API_VERSION
> +KVM_CREATE_VM		(*) see note
> +KVM_CHECK_EXTENSION
> +KVM_GET_VCPU_MMAP_SIZE
> +
> +Notes:
> +* KVM_CREATE_VM may fail on s390, if the calling process has multiple
> +threads and has not called KVM_S390_ENABLE_SIE before.
> +
> +In addition, on s390 the following architecture specific ioctls are supported:
> +ioctl:		KVM_S390_ENABLE_SIE
> +args:		none
> +see also:	include/linux/kvm.h
> +This call causes the kernel to switch on PGSTE in the user page table. This
> +operation is needed in order to run a virtual machine, and it requires the
> +calling process to be single-threaded. Note that the first call to KVM_CREATE_VM
> +will implicitly try to switch on PGSTE if the user process has not called
> +KVM_S390_ENABLE_SIE before. User processes that want to launch multiple threads
> +before creating a virtual machine have to call KVM_S390_ENABLE_SIE, or will
> +observe an error calling KVM_CREATE_VM. Switching on PGSTE is a one-time
> +operation, is not reversible, and will persist over the entire lifetime of
> +the calling process. It does not have any user-visible effect other than a small
> +performance penalty.
> +
> +2. ioctl calls to the kvm-vm file descriptor
> +KVM does support the following ioctls on s390 that are common with other
> +architectures and do behave the same:
> +KVM_CREATE_VCPU
> +KVM_SET_USER_MEMORY_REGION      (*) see note
> +KVM_GET_DIRTY_LOG		(**) see note
> +
> +Notes:
> +*  kvm does only allow exactly one memory slot on s390, which has to start
> +   at guest absolute address zero and at a user address that is aligned on any
> +   page boundary. This hardware "limitation" allows us to have a few unique
> +   optimizations. The memory slot doesn't have to be filled
> +   with memory actually, it may contain sparse holes. That said, with different
> +   user memory layout this does still allow a large flexibility when
> +   doing the guest memory setup.
> +** KVM_GET_DIRTY_LOG doesn't work properly yet. The user will receive an empty
> +log. This ioctl call is only needed for guest migration, and we intend to
> +implement this one in the future.
> +
> +In addition, on s390 the following architecture specific ioctls for the kvm-vm
> +file descriptor are supported:
> +ioctl:		KVM_S390_INTERRUPT
> +args:		struct kvm_s390_interrupt *
> +see also:	include/linux/kvm.h
> +This ioctl is used to submit a floating interrupt for a virtual machine.
> +Floating interrupts may be delivered to any virtual cpu in the configuration.
> +Only some interrupt types defined in include/linux/kvm.h make sense when
> +submitted as floating interrupts. The following interrupts are not considered
> +to be useful as floating interrupts, and a call to inject them will result in
> +-EINVAL error code: program interrupts and interprocessor signals. Valid
> +floating interrupts are:
> +KVM_S390_INT_VIRTIO
> +KVM_S390_INT_SERVICE
> +
> +3. ioctl calls to the kvm-vcpu file descriptor
> +KVM does support the following ioctls on s390 that are common with other
> +architectures and do behave the same:
> +KVM_RUN
> +KVM_GET_REGS
> +KVM_SET_REGS
> +KVM_GET_SREGS
> +KVM_SET_SREGS
> +KVM_GET_FPU
> +KVM_SET_FPU
> +
> +In addition, on s390 the following architecture specific ioctls for the
> +kvm-vcpu file descriptor are supported:
> +ioctl:		KVM_S390_INTERRUPT
> +args:		struct kvm_s390_interrupt *
> +see also:	include/linux/kvm.h
> +This ioctl is used to submit an interrupt for a specific virtual cpu.
> +Only some interrupt types defined in include/linux/kvm.h make sense when
> +submitted for a specific cpu. The following interrupts are not considered
> +to be useful, and a call to inject them will result in -EINVAL error code:
> +service processor calls and virtio interrupts. Valid interrupt types are:
> +KVM_S390_PROGRAM_INT
> +KVM_S390_SIGP_STOP
> +KVM_S390_RESTART
> +KVM_S390_SIGP_SET_PREFIX
> +KVM_S390_INT_EMERGENCY
> +
> +ioctl:		KVM_S390_STORE_STATUS
> +args:		unsigned long
> +see also:	include/linux/kvm.h
> +This ioctl stores the state of the cpu at the guest real address given as
> +argument, unless one of the following values defined in include/linux/kvm.h
> +is given as arguement:
> +KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
                                      ~~~
> +absolute lowcore as defined by the principles of operation
> +KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
                                        ~~~

Please use "CPU" consistently throughout the file (i.e., not "cpu").

> +its prefix page just like the dump tool that comes with zipl. This is useful
> +to create a system dump for use with lkcdutils or crash.
> +
> +ioctl:		KVM_S390_SET_INITIAL_PSW
> +args:		struct kvm_s390_psw *
> +see also:	include/linux/kvm.h
> +This ioctl can be used to set the processor status word (psw) of a stopped cpu
> +prior to running it with KVM_RUN. Note that this call is not required to modify
> +the psw during sie intercepts that fall back to userspace because struct kvm_run
> +does contain the psw, and this value is evaluated during reentry of KVM_RUN
> +after the intercept exit was recognized.
> +
> +ioctl:		KVM_S390_INITIAL_RESET
> +args:		none
> +see also:	include/linux/kvm.h
> +This ioctl can be used to perform an initial cpu reset as defined by the
> +principles of operation. The target cpu has to be in stopped state.
> -- 

---
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists