| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080420223959.GA17998@havoc.gtf.org>
Date: Sun, 20 Apr 2008 18:39:59 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: LKML <linux-kernel@...r.kernel.org>, netdev@...r.kernel.org,
isdn4linux@...tserv.isdn4linux.de, Greg KH <greg@...ah.com>
Subject: [git patches] ISDN cleanups (modularization prep)
ISDN is the last major subsystem that uses pci_find_* rather than the
"new" PCI hotplug API. I have [untested (no h/w)] patches that convert
these drivers over to the new PCI API in #isdn-pci.
The changes below prepare us for those changes. Both changes submitted
here are no-behavior-change patches, simply internal cleanups that
prepare us for #isdn-pci. If any user is impacted at all, that's a bug.
These changes have been in -mm for spell, though they are not presently
there. Since this project was started well over a year ago (with LKML,
kkeil, and isdn4linux always CC'd), the only objections raised were
not directly related:
- "isn't ISDN dead?" Apparently, no it's not :)
- "don't waste your time, drop these drivers and get mISDN into the
kernel instead" -- based on discussion it does sound like mISDN should
get into the kernel. Until these drivers are dropped, however, my
patches remain appropriate.
And in case people are curious, #isdn-pci isn't ready for upstream yet
for two main reasons: (1) two drivers remain unconverted, and (2) none
of the changes have been tested, even once.
Please pull from 'isdn-cleanups' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6.git isdn-cleanups
to receive the following updates:
drivers/isdn/hisax/asuscom.c | 5 +----
drivers/isdn/hisax/avm_a1.c | 27 +++++++++------------------
drivers/isdn/hisax/bkm_a4t.c | 19 ++++++++++---------
drivers/isdn/hisax/bkm_a8.c | 31 +++++++++++++------------------
drivers/isdn/hisax/config.c | 14 +++++++++-----
drivers/isdn/hisax/gazel.c | 5 ++---
drivers/isdn/hisax/hfc_pci.c | 2 --
drivers/isdn/hisax/hfc_sx.c | 2 --
drivers/isdn/hisax/hisax_cfg.h | 2 ++
drivers/isdn/hisax/isurf.c | 13 ++++---------
drivers/isdn/hisax/ix1_micro.c | 9 ++++-----
drivers/isdn/hisax/mic.c | 5 +----
drivers/isdn/hisax/netjet.h | 2 --
drivers/isdn/hisax/niccy.c | 19 ++++++++-----------
drivers/isdn/hisax/nj_s.c | 3 +--
drivers/isdn/hisax/nj_u.c | 4 ++--
drivers/isdn/hisax/s0box.c | 13 ++++---------
drivers/isdn/hisax/saphir.c | 8 +++-----
drivers/isdn/hisax/sportster.c | 11 +++++------
drivers/isdn/hisax/teleint.c | 5 +----
drivers/isdn/hisax/telespci.c | 5 ++---
drivers/isdn/hisax/w6692.c | 2 --
22 files changed, 81 insertions(+), 125 deletions(-)
Jeff Garzik (2):
[ISDN] HiSax: modularization prep
[ISDN] Hisax: eliminate many unnecessary references to CardType[]
diff --git a/drivers/isdn/hisax/asuscom.c b/drivers/isdn/hisax/asuscom.c
index 61e69e9..b96f318 100644
--- a/drivers/isdn/hisax/asuscom.c
+++ b/drivers/isdn/hisax/asuscom.c
@@ -20,8 +20,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
-
static const char *Asuscom_revision = "$Revision: 1.14.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -376,8 +374,7 @@ setup_asuscom(struct IsdnCard *card)
cs->irq = card->para[0];
if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: ISDNLink config port %x-%x already in use\n",
cs->hw.asus.cfg_reg,
cs->hw.asus.cfg_reg + bytecnt);
return (0);
diff --git a/drivers/isdn/hisax/avm_a1.c b/drivers/isdn/hisax/avm_a1.c
index d9028e9..eb6b432 100644
--- a/drivers/isdn/hisax/avm_a1.c
+++ b/drivers/isdn/hisax/avm_a1.c
@@ -16,7 +16,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
static const char *avm_revision = "$Revision: 2.15.2.4 $";
#define AVM_A1_STAT_ISAC 0x01
@@ -200,16 +199,14 @@ setup_avm_a1(struct IsdnCard *card)
cs->irq = card->para[0];
if (!request_region(cs->hw.avm.cfg_reg, 8, "avm cfg")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: AVM A1 config port %x-%x already in use\n",
cs->hw.avm.cfg_reg,
cs->hw.avm.cfg_reg + 8);
return (0);
}
if (!request_region(cs->hw.avm.isac + 32, 32, "HiSax isac")) {
printk(KERN_WARNING
- "HiSax: %s isac ports %x-%x already in use\n",
- CardType[cs->typ],
+ "HiSax: AVM A1 isac ports %x-%x already in use\n",
cs->hw.avm.isac + 32,
cs->hw.avm.isac + 64);
release_ioregs(cs, 0);
@@ -217,16 +214,14 @@ setup_avm_a1(struct IsdnCard *card)
}
if (!request_region(cs->hw.avm.isacfifo, 1, "HiSax isac fifo")) {
printk(KERN_WARNING
- "HiSax: %s isac fifo port %x already in use\n",
- CardType[cs->typ],
+ "HiSax: AVM A1 isac fifo port %x already in use\n",
cs->hw.avm.isacfifo);
release_ioregs(cs, 1);
return (0);
}
if (!request_region(cs->hw.avm.hscx[0] + 32, 32, "HiSax hscx A")) {
printk(KERN_WARNING
- "HiSax: %s hscx A ports %x-%x already in use\n",
- CardType[cs->typ],
+ "HiSax: AVM A1 hscx A ports %x-%x already in use\n",
cs->hw.avm.hscx[0] + 32,
cs->hw.avm.hscx[0] + 64);
release_ioregs(cs, 3);
@@ -234,16 +229,14 @@ setup_avm_a1(struct IsdnCard *card)
}
if (!request_region(cs->hw.avm.hscxfifo[0], 1, "HiSax hscx A fifo")) {
printk(KERN_WARNING
- "HiSax: %s hscx A fifo port %x already in use\n",
- CardType[cs->typ],
+ "HiSax: AVM A1 hscx A fifo port %x already in use\n",
cs->hw.avm.hscxfifo[0]);
release_ioregs(cs, 7);
return (0);
}
if (!request_region(cs->hw.avm.hscx[1] + 32, 32, "HiSax hscx B")) {
printk(KERN_WARNING
- "HiSax: %s hscx B ports %x-%x already in use\n",
- CardType[cs->typ],
+ "HiSax: AVM A1 hscx B ports %x-%x already in use\n",
cs->hw.avm.hscx[1] + 32,
cs->hw.avm.hscx[1] + 64);
release_ioregs(cs, 0xf);
@@ -251,8 +244,7 @@ setup_avm_a1(struct IsdnCard *card)
}
if (!request_region(cs->hw.avm.hscxfifo[1], 1, "HiSax hscx B fifo")) {
printk(KERN_WARNING
- "HiSax: %s hscx B fifo port %x already in use\n",
- CardType[cs->typ],
+ "HiSax: AVM A1 hscx B fifo port %x already in use\n",
cs->hw.avm.hscxfifo[1]);
release_ioregs(cs, 0x1f);
return (0);
@@ -284,9 +276,8 @@ setup_avm_a1(struct IsdnCard *card)
printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
cs->hw.avm.cfg_reg, val);
- printk(KERN_INFO
- "HiSax: %s config irq:%d cfg:0x%X\n",
- CardType[cs->typ], cs->irq,
+ printk(KERN_INFO "HiSax: AVM A1 config irq:%d cfg:0x%X\n",
+ cs->irq,
cs->hw.avm.cfg_reg);
printk(KERN_INFO
"HiSax: isac:0x%X/0x%X\n",
diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
index 3d1bdc8..9ca2ee5 100644
--- a/drivers/isdn/hisax/bkm_a4t.c
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -20,8 +20,6 @@
#include <linux/pci.h>
#include "bkm_ax.h"
-extern const char *CardType[];
-
static const char *bkm_a4t_revision = "$Revision: 1.22.2.4 $";
@@ -284,15 +282,16 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
I20_REGISTER_FILE *pI20_Regs;
if (!cs->irq) { /* IRQ range check ?? */
- printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
+ printk(KERN_WARNING "HiSax: Telekom A4T: No IRQ\n");
return (0);
}
cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
/* Check suspecious address */
pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
- printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n",
- CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096);
+ printk(KERN_WARNING "HiSax: Telekom A4T address "
+ "%lx-%lx suspicious\n",
+ cs->hw.ax.base, cs->hw.ax.base + 4096);
iounmap((void *) cs->hw.ax.base);
cs->hw.ax.base = 0;
return (0);
@@ -302,8 +301,9 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
cs->hw.ax.isac_ale = GCS_1;
cs->hw.ax.jade_ale = GCS_3;
- printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
- CardType[card->typ], cs->hw.ax.base, cs->irq);
+ printk(KERN_INFO "HiSax: Telekom A4T: Card configured at "
+ "0x%lX IRQ %d\n",
+ cs->hw.ax.base, cs->irq);
setup_isac(cs);
cs->readisac = &ReadISAC;
@@ -349,11 +349,12 @@ setup_bkm_a4t(struct IsdnCard *card)
break;
}
if (!found) {
- printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
+ printk(KERN_WARNING "HiSax: Telekom A4T: Card not found\n");
return (0);
}
if (!pci_memaddr) {
- printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
+ printk(KERN_WARNING "HiSax: Telekom A4T: "
+ "No Memory base address\n");
return (0);
}
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 99ef3b4..e1ff471 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -22,8 +22,6 @@
#define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */
-extern const char *CardType[];
-
static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
static const char *sct_quadro_subtypes[] =
@@ -181,8 +179,7 @@ bkm_interrupt_ipac(int intno, void *dev_id)
goto Start_IPAC;
}
if (!icnt)
- printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
- CardType[cs->typ],
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
sct_quadro_subtypes[cs->subtyp]);
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
@@ -296,8 +293,8 @@ setup_sct_quadro(struct IsdnCard *card)
if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
cs->subtyp = card->para[0];
else {
- printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
- CardType[card->typ]);
+ printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
+ "subcontroller in configuration, default to 1\n");
return (0);
}
if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
@@ -322,16 +319,16 @@ setup_sct_quadro(struct IsdnCard *card)
}
}
if (!found) {
- printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
- CardType[card->typ],
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+ "Card not found\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
#ifdef ATTEMPT_PCI_REMAPPING
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
- printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
- CardType[card->typ],
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+ "PLX rev 1, remapping required!\n",
sct_quadro_subtypes[cs->subtyp]);
/* Restart PCI negotiation */
pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
@@ -344,8 +341,7 @@ setup_sct_quadro(struct IsdnCard *card)
#endif /* End HACK */
}
if (!pci_irq) { /* IRQ range check ?? */
- printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
- CardType[card->typ],
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
@@ -355,8 +351,8 @@ setup_sct_quadro(struct IsdnCard *card)
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
- printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
- CardType[card->typ],
+ printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+ "No IO base address(es)\n",
sct_quadro_subtypes[cs->subtyp]);
return (0);
}
@@ -411,8 +407,8 @@ setup_sct_quadro(struct IsdnCard *card)
/* For isac and hscx data path */
cs->hw.ax.data_adr = cs->hw.ax.base + 4;
- printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
- CardType[card->typ],
+ printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
+ "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
sct_quadro_subtypes[cs->subtyp],
cs->hw.ax.plx_adr,
cs->hw.ax.base,
@@ -432,8 +428,7 @@ setup_sct_quadro(struct IsdnCard *card)
cs->cardmsg = &BKM_card_msg;
cs->irq_func = &bkm_interrupt_ipac;
- printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
- CardType[card->typ],
+ printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
sct_quadro_subtypes[cs->subtyp],
readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
return (1);
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index a0ee43c..84d75a3 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1169,7 +1169,9 @@ outf_cs:
/* Used from an exported function but calls __devinit functions.
* Tell modpost not to warn (__ref)
*/
-static int __ref checkcard(int cardnr, char *id, int *busy_flag, struct module *lockowner)
+static int __ref checkcard(int cardnr, char *id, int *busy_flag,
+ struct module *lockowner,
+ hisax_setup_func_t card_setup)
{
int ret;
struct IsdnCard *card = cards + cardnr;
@@ -1187,7 +1189,7 @@ static int __ref checkcard(int cardnr, char *id, int *busy_flag, struct module *
(card->protocol == ISDN_PTYPE_NI1) ? "NI1" :
"NONE", cs->iif.id, cs->myid);
- ret = hisax_cs_setup_card(card);
+ ret = card_setup(card);
if (!ret) {
ll_unload(cs);
goto outf_cs;
@@ -1241,7 +1243,8 @@ static int HiSax_inithardware(int *busy_flag)
else
sprintf(ids, "%s%d", id, i);
}
- if (checkcard(i, ids, busy_flag, THIS_MODULE)) {
+ if (checkcard(i, ids, busy_flag, THIS_MODULE,
+ hisax_cs_setup_card)) {
foundcards++;
i++;
} else {
@@ -1549,7 +1552,8 @@ int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
sprintf(ids, "HiSax%d", nrcards);
else
sprintf(ids, "HiSax");
- if (!checkcard(nrcards, ids, busy_flag, THIS_MODULE))
+ if (!checkcard(nrcards, ids, busy_flag, THIS_MODULE,
+ hisax_cs_setup_card))
goto error;
ret = nrcards;
@@ -1595,7 +1599,7 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
cards[i].protocol = protocol;
sprintf(id, "%s%d", name, i);
nrcards++;
- retval = checkcard(i, id, NULL, hisax_d_if->owner);
+ retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index f66620a..0ea3b46 100644
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -19,7 +19,6 @@
#include "ipac.h"
#include <linux/pci.h>
-extern const char *CardType[];
static const char *gazel_revision = "$Revision: 2.19.2.4 $";
#define R647 1
@@ -479,8 +478,8 @@ reserve_regions(struct IsdnCard *card, struct IsdnCardState *cs)
return 0;
error:
- printk(KERN_WARNING "Gazel: %s io ports 0x%x-0x%x already in use\n",
- CardType[cs->typ], adr, adr + len);
+ printk(KERN_WARNING "Gazel: io ports 0x%x-0x%x already in use\n",
+ adr, adr + len);
return 1;
}
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index fba8b62..f126566 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -22,8 +22,6 @@
#include <linux/pci.h>
#include <linux/interrupt.h>
-extern const char *CardType[];
-
static const char *hfcpci_revision = "$Revision: 1.48.2.4 $";
/* table entry in the PCI devices list */
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 05482d2..f4a2138 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -18,8 +18,6 @@
#include <linux/interrupt.h>
#include <linux/isapnp.h>
-extern const char *CardType[];
-
static const char *hfcsx_revision = "$Revision: 1.12.2.5 $";
/***************************************/
diff --git a/drivers/isdn/hisax/hisax_cfg.h b/drivers/isdn/hisax/hisax_cfg.h
index ca3fe62..17a2fea 100644
--- a/drivers/isdn/hisax/hisax_cfg.h
+++ b/drivers/isdn/hisax/hisax_cfg.h
@@ -60,5 +60,7 @@ struct IsdnCard {
IsdnCardState_t *cs;
};
+typedef int (*hisax_setup_func_t)(struct IsdnCard *card);
+
extern void HiSax_closecard(int);
extern int hisax_init_pcmcia(void *, int *, IsdnCard_t *);
diff --git a/drivers/isdn/hisax/isurf.c b/drivers/isdn/hisax/isurf.c
index 55de069..ca41617 100644
--- a/drivers/isdn/hisax/isurf.c
+++ b/drivers/isdn/hisax/isurf.c
@@ -17,8 +17,6 @@
#include "isdnl1.h"
#include <linux/isapnp.h>
-extern const char *CardType[];
-
static const char *ISurf_revision = "$Revision: 1.12.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -251,22 +249,19 @@ setup_isurf(struct IsdnCard *card)
return(0);
}
#else
- printk(KERN_WARNING "HiSax: %s port/mem not set\n",
- CardType[card->typ]);
+ printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
return (0);
#endif
}
if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
printk(KERN_WARNING
- "HiSax: %s config port %x already in use\n",
- CardType[card->typ],
+ "HiSax: Siemens I-Surf config port %x already in use\n",
cs->hw.isurf.reset);
return (0);
}
if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
- printk(KERN_WARNING
- "HiSax: %s memory region %lx-%lx already in use\n",
- CardType[card->typ],
+ printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
+ "%lx-%lx already in use\n",
cs->hw.isurf.phymem,
cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
release_region(cs->hw.isurf.reset, 1);
diff --git a/drivers/isdn/hisax/ix1_micro.c b/drivers/isdn/hisax/ix1_micro.c
index 252d79d..2d18d4f 100644
--- a/drivers/isdn/hisax/ix1_micro.c
+++ b/drivers/isdn/hisax/ix1_micro.c
@@ -24,7 +24,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
static const char *ix1_revision = "$Revision: 2.12.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -288,15 +287,15 @@ setup_ix1micro(struct IsdnCard *card)
if (cs->hw.ix1.cfg_reg) {
if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: ITK ix1-micro Rev.2 config port "
+ "%x-%x already in use\n",
cs->hw.ix1.cfg_reg,
cs->hw.ix1.cfg_reg + 4);
return (0);
}
}
- printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
- CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
+ printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
+ cs->irq, cs->hw.ix1.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
diff --git a/drivers/isdn/hisax/mic.c b/drivers/isdn/hisax/mic.c
index a81d175..2539430 100644
--- a/drivers/isdn/hisax/mic.c
+++ b/drivers/isdn/hisax/mic.c
@@ -16,8 +16,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
-
static const char *mic_revision = "$Revision: 1.12.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -210,8 +208,7 @@ setup_mic(struct IsdnCard *card)
if (!request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: ith mic config port %x-%x already in use\n",
cs->hw.mic.cfg_reg,
cs->hw.mic.cfg_reg + bytecnt);
return (0);
diff --git a/drivers/isdn/hisax/netjet.h b/drivers/isdn/hisax/netjet.h
index 4d89d3e..68e504d 100644
--- a/drivers/isdn/hisax/netjet.h
+++ b/drivers/isdn/hisax/netjet.h
@@ -12,8 +12,6 @@
*
*/
-extern const char *CardType[];
-
#define byteout(addr,val) outb(val,addr)
#define bytein(addr) inb(addr)
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index bd99211..421b8e6 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -21,7 +21,6 @@
#include <linux/pci.h>
#include <linux/isapnp.h>
-extern const char *CardType[];
static const char *niccy_revision = "$Revision: 1.21.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -284,14 +283,14 @@ int __devinit setup_niccy(struct IsdnCard *card)
cs->subtyp = NICCY_PNP;
cs->irq = card->para[0];
if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
- printk(KERN_WARNING "HiSax: %s data port %x-%x "
- "already in use\n", CardType[card->typ],
+ printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
+ "already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
return 0;
}
if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
- printk(KERN_WARNING "HiSax: %s address port %x-%x "
- "already in use\n", CardType[card->typ],
+ printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
+ "already in use\n",
cs->hw.niccy.isac_ale,
cs->hw.niccy.isac_ale + 1);
release_region(cs->hw.niccy.isac, 2);
@@ -339,15 +338,13 @@ int __devinit setup_niccy(struct IsdnCard *card)
cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
printk(KERN_WARNING
- "HiSax: %s data port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: NICCY data port %x-%x already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
return 0;
}
if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
printk(KERN_WARNING
- "HiSax: %s pci port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: NICCY pci port %x-%x already in use\n",
cs->hw.niccy.cfg_reg,
cs->hw.niccy.cfg_reg + 0x40);
release_region(cs->hw.niccy.isac, 4);
@@ -359,8 +356,8 @@ int __devinit setup_niccy(struct IsdnCard *card)
return 0;
#endif /* CONFIG_PCI_LEGACY */
}
- printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
- CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI",
+ printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
+ (cs->subtyp == 1) ? "PnP" : "PCI",
cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
setup_isac(cs);
cs->readisac = &ReadISAC;
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index a895dfe..8d36ccc 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -235,8 +235,7 @@ static int __devinit njs_cs_init_rest(struct IsdnCard *card,
cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
printk(KERN_WARNING
- "HiSax: %s config port %#lx-%#lx already in use\n",
- CardType[card->typ],
+ "HiSax: NETjet-S config port %#lx-%#lx already in use\n",
cs->hw.njet.base,
cs->hw.njet.base + bytecnt);
return (0);
diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c
index f017d38..d306c94 100644
--- a/drivers/isdn/hisax/nj_u.c
+++ b/drivers/isdn/hisax/nj_u.c
@@ -197,8 +197,8 @@ static int __devinit nju_cs_init_rest(struct IsdnCard *card,
cs->hw.njet.base, cs->irq);
if (!request_region(cs->hw.njet.base, bytecnt, "netspider-u isdn")) {
printk(KERN_WARNING
- "HiSax: %s config port %#lx-%#lx already in use\n",
- CardType[card->typ],
+ "HiSax: NETspider-U config port %#lx-%#lx "
+ "already in use\n",
cs->hw.njet.base,
cs->hw.njet.base + bytecnt);
return (0);
diff --git a/drivers/isdn/hisax/s0box.c b/drivers/isdn/hisax/s0box.c
index 150ef68..16d00b5 100644
--- a/drivers/isdn/hisax/s0box.c
+++ b/drivers/isdn/hisax/s0box.c
@@ -16,7 +16,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
static const char *s0box_revision = "$Revision: 2.6.2.4 $";
static inline void
@@ -231,19 +230,15 @@ setup_s0box(struct IsdnCard *card)
cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
cs->irq = card->para[0];
if (!request_region(cs->hw.teles3.cfg_reg,8, "S0Box parallel I/O")) {
- printk(KERN_WARNING
- "HiSax: %s ports %x-%x already in use\n",
- CardType[cs->typ],
+ printk(KERN_WARNING "HiSax: S0Box ports %x-%x already in use\n",
cs->hw.teles3.cfg_reg,
cs->hw.teles3.cfg_reg + 7);
return 0;
}
- printk(KERN_INFO
- "HiSax: %s config irq:%d isac:0x%x cfg:0x%x\n",
- CardType[cs->typ], cs->irq,
+ printk(KERN_INFO "HiSax: S0Box config irq:%d isac:0x%x cfg:0x%x\n",
+ cs->irq,
cs->hw.teles3.isac, cs->hw.teles3.cfg_reg);
- printk(KERN_INFO
- "HiSax: hscx A:0x%x hscx B:0x%x\n",
+ printk(KERN_INFO "HiSax: hscx A:0x%x hscx B:0x%x\n",
cs->hw.teles3.hscx[0], cs->hw.teles3.hscx[1]);
setup_isac(cs);
cs->readisac = &ReadISAC;
diff --git a/drivers/isdn/hisax/saphir.c b/drivers/isdn/hisax/saphir.c
index c99b166..b34a81d 100644
--- a/drivers/isdn/hisax/saphir.c
+++ b/drivers/isdn/hisax/saphir.c
@@ -18,7 +18,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
static char *saphir_rev = "$Revision: 1.10.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -260,15 +259,14 @@ setup_saphir(struct IsdnCard *card)
cs->irq = card->para[0];
if (!request_region(cs->hw.saphir.cfg_reg, 6, "saphir")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: HST Saphir config port %x-%x already in use\n",
cs->hw.saphir.cfg_reg,
cs->hw.saphir.cfg_reg + 5);
return (0);
}
- printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
- CardType[cs->typ], cs->irq, cs->hw.saphir.cfg_reg);
+ printk(KERN_INFO "HiSax: HST Saphir config irq:%d io:0x%X\n",
+ cs->irq, cs->hw.saphir.cfg_reg);
setup_isac(cs);
cs->hw.saphir.timer.function = (void *) SaphirWatchDog;
diff --git a/drivers/isdn/hisax/sportster.c b/drivers/isdn/hisax/sportster.c
index 0220950..0a53759 100644
--- a/drivers/isdn/hisax/sportster.c
+++ b/drivers/isdn/hisax/sportster.c
@@ -18,7 +18,6 @@
#include "hscx.h"
#include "isdnl1.h"
-extern const char *CardType[];
static const char *sportster_revision = "$Revision: 1.16.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -192,9 +191,9 @@ get_io_range(struct IsdnCardState *cs)
for (i=0;i<64;i++) {
adr = cs->hw.spt.cfg_reg + i *1024;
if (!request_region(adr, 8, "sportster")) {
- printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[cs->typ], adr, adr + 8);
+ printk(KERN_WARNING "HiSax: USR Sportster config port "
+ "%x-%x already in use\n",
+ adr, adr + 8);
break;
}
}
@@ -247,8 +246,8 @@ setup_sportster(struct IsdnCard *card)
printk(KERN_WARNING "Sportster: wrong IRQ\n");
return(0);
}
- printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
- CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
+ printk(KERN_INFO "HiSax: USR Sportster config irq:%d cfg:0x%X\n",
+ cs->irq, cs->hw.spt.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
diff --git a/drivers/isdn/hisax/teleint.c b/drivers/isdn/hisax/teleint.c
index 0909662..b0ce4ae 100644
--- a/drivers/isdn/hisax/teleint.c
+++ b/drivers/isdn/hisax/teleint.c
@@ -16,8 +16,6 @@
#include "hfc_2bs0.h"
#include "isdnl1.h"
-extern const char *CardType[];
-
static const char *TeleInt_revision = "$Revision: 1.16.2.5 $";
#define byteout(addr,val) outb(val,addr)
@@ -286,8 +284,7 @@ setup_TeleInt(struct IsdnCard *card)
init_timer(&cs->hw.hfc.timer);
if (!request_region(cs->hw.hfc.addr, 2, "TeleInt isdn")) {
printk(KERN_WARNING
- "HiSax: %s config port %x-%x already in use\n",
- CardType[card->typ],
+ "HiSax: TeleInt config port %x-%x already in use\n",
cs->hw.hfc.addr,
cs->hw.hfc.addr + 2);
return (0);
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index 4393003..28b08de 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -19,7 +19,6 @@
#include "isdnl1.h"
#include <linux/pci.h>
-extern const char *CardType[];
static const char *telespci_revision = "$Revision: 2.23.2.3 $";
#define ZORAN_PO_RQ_PEN 0x02000000
@@ -329,8 +328,8 @@ setup_telespci(struct IsdnCard *card)
/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */
printk(KERN_INFO
- "HiSax: %s config irq:%d mem:%p\n",
- CardType[cs->typ], cs->irq,
+ "HiSax: Teles PCI config irq:%d mem:%p\n",
+ cs->irq,
cs->hw.teles0.membase);
setup_isac(cs);
diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index 39129b9..bb1c8dd 100644
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -38,8 +38,6 @@ static const PCI_ENTRY id_list[] =
#define W6692_DYNALINK 1
#define W6692_USR 2
-extern const char *CardType[];
-
static const char *w6692_revision = "$Revision: 1.18.2.4 $";
#define DBUSY_TIMER_VALUE 80
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists