linux-kernel - Re: ISDN testing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <200804211536.57655.elendil@planet.nl>
Date:	Mon, 21 Apr 2008 15:36:56 +0200
From:	Frans Pop <elendil@...net.nl>
To:	Jeff Garzik <jeff@...zik.org>
Cc:	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	isdn4linux@...tserv.isdn4linux.de
Subject: Re: ISDN testing

On Monday 21 April 2008, Jeff Garzik wrote:
> Frans Pop wrote:
> > The cards I have are:
> > - Teles 16.3 ISA -- worked way back when with Debian Woody
> > - ITK ix1-micro 2.1 ISA
> > - Eicon Diva 2.01 PCI
>
> Honestly, a module-load test on real hardware can give us some useful
> information, even if it's not connected to anything.
>
> My changes are primarily in the probe-the-hardware area, so successfully
> making it past that new code would indeed be a useful data point.
>
> Check out the kernel found in 'isdn-pci' branch of
> git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6.git

Turns out all 3 cards are supported by the same basic driver: hisax, so
I can only test for the one driver. The Eicon Diva uses an additional
module though: hisaxdiva.

I've put the last 2 cards in one machine and (after some fiddling with
jumpers and interrupts and IO ports :-) both are detected perfectly with
2.6.24 when hisax is modprobed.

Advantage of using the two cards is that it covers both PCI and ISA.
The PCI card gets configured automagically, while the ISA card requires
module parameters for io/irq.

I've compiled a kernel based on your 'isdn-pci' branch, and it boots fine.

But when I tried to modprobe hisax, I got:
# modprobe hisax
FATAL: Module hisax not found.

Cause seems to be:
# depmod -a
WARNING: Module /lib/modules/2.6.25-isdn/kernel/drivers/isdn/hisax/hisaxdiva.ko 
ignored, due to loop
WARNING: Module /lib/modules/2.6.25-isdn/kernel/drivers/isdn/hisax/libhisax.ko 
ignored, due to loop
WARNING: Loop 
detected: /lib/modules/2.6.25-isdn/kernel/drivers/isdn/hisax/hisax.ko needs 
libhisax.ko which needs hisax.ko again!
WARNING: Module /lib/modules/2.6.25-isdn/kernel/drivers/isdn/hisax/hisax.ko 
ignored, due to loop

If needed I can also try with vanilla 2.6.25 to get a bit more current
baseline test than I now have with 2.6.24.

Cheers,
FJP
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/