[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080425072621.GA21299@havoc.gtf.org>
Date: Fri, 25 Apr 2008 03:26:21 -0400
From: Jeff Garzik <jeff@...zik.org>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] net driver updates
Please pull from 'upstream-davem' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-davem
to receive the following updates:
Documentation/networking/phy.txt | 38 +++-
drivers/net/arm/at91_ether.c | 1 +
drivers/net/arm/ep93xx_eth.c | 2 +
drivers/net/atlx/atl1.c | 138 ++++++++++++
drivers/net/atlx/atlx.c | 177 ---------------
drivers/net/ax88796.c | 1 +
drivers/net/bfin_mac.c | 7 +-
drivers/net/cpmac.c | 2 +
drivers/net/dm9000.c | 1 +
drivers/net/e1000e/82571.c | 6 -
drivers/net/e1000e/defines.h | 3 +
drivers/net/e1000e/e1000.h | 34 +++-
drivers/net/e1000e/es2lan.c | 129 ++++++++---
drivers/net/e1000e/ethtool.c | 49 ++++-
drivers/net/e1000e/hw.h | 12 +-
drivers/net/e1000e/netdev.c | 159 ++++++++-----
drivers/net/e1000e/phy.c | 73 ++++---
drivers/net/ehea/ehea_main.c | 4 +-
drivers/net/forcedeth.c | 432 +++++++++++++++++++++++++++++-------
drivers/net/gianfar.c | 104 ++++++---
drivers/net/ibm_newemac/core.c | 83 ++++++-
drivers/net/ibm_newemac/core.h | 14 +-
drivers/net/ibm_newemac/mal.c | 20 ++-
drivers/net/ibm_newemac/rgmii.c | 2 +-
drivers/net/ibm_newemac/tah.c | 2 +-
drivers/net/ibm_newemac/zmii.c | 2 +-
drivers/net/igb/igb_main.c | 2 +
drivers/net/irda/ali-ircc.c | 2 +
drivers/net/irda/pxaficp_ir.c | 2 +
drivers/net/irda/sa1100_ir.c | 2 +
drivers/net/ixgbe/ixgbe_main.c | 2 +
drivers/net/jazzsonic.c | 2 +
drivers/net/korina.c | 39 ++--
drivers/net/macb.c | 2 +
drivers/net/meth.c | 2 +
drivers/net/mv643xx_eth.c | 5 +-
drivers/net/netx-eth.c | 2 +-
drivers/net/netxen/netxen_nic_hw.c | 15 +-
drivers/net/phy/mdio_bus.c | 3 +
drivers/net/phy/phy.c | 4 +-
drivers/net/phy/phy_device.c | 129 ++++++++++-
drivers/net/s2io.c | 128 +----------
drivers/net/s2io.h | 9 -
drivers/net/sgiseeq.c | 4 +-
drivers/net/smc911x.c | 8 +-
drivers/net/smc91x.c | 2 +
drivers/net/sni_82596.c | 2 +
drivers/net/tehuti.c | 15 ++
drivers/net/tsi108_eth.c | 2 +
drivers/net/typhoon.c | 1 -
drivers/net/ucc_geth.c | 2 +-
drivers/net/via-velocity.c | 46 +++--
drivers/net/wan/c101.c | 6 +-
drivers/net/wan/hdlc_fr.c | 4 -
include/linux/phy.h | 24 ++-
55 files changed, 1290 insertions(+), 671 deletions(-)
Andrew Morton (1):
ehea: make things static
Andy Fleming (3):
ucc_geth: Fix sneaky merge conflict regarding bus_id
phylib: Add support for board-level PHY fixups
gianfar: Fix skb allocation strategy
Auke Kok (3):
e1000e: Add interrupt moderation run-time ethtool interface
e1000e: lower ring minimum size to 64
igb: save and restore pcie/msi state to support EEH recovery
Ayaz Abdulla (2):
forcedeth: new backoff implementation
forcedeth: realtek phy crossover detection
Benjamin Herrenschmidt (1):
ibm_newemac: Increase MDIO timeouts
Bruce Allan (1):
e1000e: cleanup several stats issues
Chris Snook (2):
atlx: remove flash vendor parameter
[netdrvr] atlx: code movement: move atl1 parameter parsing
Cédric Augonnet (1):
Removing dead code in drivers/net/wan/hdlc_fr.c
David Graham (1):
e1000e: Fix HW Error on es2lan, ARP capture issue by BMC
Francois Romieu (4):
tehuti: check register size
korina: fix misplaced return statement
korina: misc cleanup
via-velocity: fix vlan receipt
Grant Grundler (1):
[netdrvr] typhoon: typhoon_resume - remove call to start_queue
Harvey Harrison (1):
netxen: reduce stack usage of netxen_nic_flash_print
Jeff Garzik (1):
[netdrvr] tehuti: move ioctl perm check closer to function start
Jesse Brandeburg (1):
e1000e: Increment version to 0.2.1
Josh Boyer (2):
ibm_newemac: Fix section mismatch warnings
ibm_newemac Use status property for unused/unwired EMACs
Kay Sievers (1):
net drivers: fix platform driver hotplug/coldplug
Krzysztof Halasa (1):
WAN: Fix confusing insmod error code for C101 too.
Roel Kluin (1):
smc911x: test after postfix decrement fails in smc911x_{reset,drop_pkt}
Sreenivasa Honnur (4):
S2io: Fix memory leak during free_tx_buffers
S2io: Version update for memory leak fix during free_tx_buffers
S2io: Removed receive buffer replenishment tasklet
S2io: Removed rx_lock and put_lock
Stefan Roese (2):
ibm_newemac: Fix problem with jumbo frame support and EMAC V4.patch
ibm_newemac: Add support for 460EX/GT-type MAL rx-channel handling
Valentine Barshak (2):
ibm_newemac: PowerPC 440GX EMAC PHY clock workaround
ibm_newemac: PowerPC 440EP/440GR EMAC PHY clock workaround
Wendy Xiong (2):
ixgbe: save and restore pcie/msi state to support EEH recovery
e1000e: save and restore pcie/msi state to support EEH recovery
diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt
index 0bc95ea..8df6a7b 100644
--- a/Documentation/networking/phy.txt
+++ b/Documentation/networking/phy.txt
@@ -1,7 +1,7 @@
-------
PHY Abstraction Layer
-(Updated 2006-11-30)
+(Updated 2008-04-08)
Purpose
@@ -291,3 +291,39 @@ Writing a PHY driver
Feel free to look at the Marvell, Cicada, and Davicom drivers in
drivers/net/phy/ for examples (the lxt and qsemi drivers have
not been tested as of this writing)
+
+Board Fixups
+
+ Sometimes the specific interaction between the platform and the PHY requires
+ special handling. For instance, to change where the PHY's clock input is,
+ or to add a delay to account for latency issues in the data path. In order
+ to support such contingencies, the PHY Layer allows platform code to register
+ fixups to be run when the PHY is brought up (or subsequently reset).
+
+ When the PHY Layer brings up a PHY it checks to see if there are any fixups
+ registered for it, matching based on UID (contained in the PHY device's phy_id
+ field) and the bus identifier (contained in phydev->dev.bus_id). Both must
+ match, however two constants, PHY_ANY_ID and PHY_ANY_UID, are provided as
+ wildcards for the bus ID and UID, respectively.
+
+ When a match is found, the PHY layer will invoke the run function associated
+ with the fixup. This function is passed a pointer to the phy_device of
+ interest. It should therefore only operate on that PHY.
+
+ The platform code can either register the fixup using phy_register_fixup():
+
+ int phy_register_fixup(const char *phy_id,
+ u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *));
+
+ Or using one of the two stubs, phy_register_fixup_for_uid() and
+ phy_register_fixup_for_id():
+
+ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *));
+ int phy_register_fixup_for_id(const char *phy_id,
+ int (*run)(struct phy_device *));
+
+ The stubs set one of the two matching criteria, and set the other one to
+ match anything.
+
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 0ae0d83..770226d 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -1246,3 +1246,4 @@ module_exit(at91ether_exit)
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
MODULE_AUTHOR("Andrew Victor");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 91a6590..ecd8fc6 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -897,6 +897,7 @@ static struct platform_driver ep93xx_eth_driver = {
.remove = ep93xx_eth_remove,
.driver = {
.name = "ep93xx-eth",
+ .owner = THIS_MODULE,
},
};
@@ -914,3 +915,4 @@ static void __exit ep93xx_eth_cleanup_module(void)
module_init(ep93xx_eth_init_module);
module_exit(ep93xx_eth_cleanup_module);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-eth");
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 5586fc6..0afe522 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -91,6 +91,144 @@
#include "atlx.c"
/*
+ * This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define ATL1_MAX_NIC 4
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
+
+/*
+ * Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 100 (200us)
+ */
+static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_int_mod_timer;
+module_param_array_named(int_mod_timer, int_mod_timer, int,
+ &num_int_mod_timer, 0);
+MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
+
+#define DEFAULT_INT_MOD_CNT 100 /* 200us */
+#define MAX_INT_MOD_CNT 65000
+#define MIN_INT_MOD_CNT 50
+
+struct atl1_option {
+ enum { enable_option, range_option, list_option } type;
+ char *name;
+ char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ struct atl1_opt_list {
+ int i;
+ char *str;
+ } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
+ struct pci_dev *pdev)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ dev_info(&pdev->dev, "%s enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ dev_info(&pdev->dev, "%s disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ dev_info(&pdev->dev, "%s set to %i\n", opt->name,
+ *value);
+ return 0;
+ }
+ break;
+ case list_option:{
+ int i;
+ struct atl1_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ dev_info(&pdev->dev, "%s\n",
+ ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/*
+ * atl1_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ */
+void __devinit atl1_check_options(struct atl1_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int bd = adapter->bd_number;
+ if (bd >= ATL1_MAX_NIC) {
+ dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
+ dev_notice(&pdev->dev, "using defaults for all values\n");
+ }
+ { /* Interrupt Moderate Timer */
+ struct atl1_option opt = {
+ .type = range_option,
+ .name = "Interrupt Moderator Timer",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_INT_MOD_CNT),
+ .def = DEFAULT_INT_MOD_CNT,
+ .arg = {.r = {.min = MIN_INT_MOD_CNT,
+ .max = MAX_INT_MOD_CNT} }
+ };
+ int val;
+ if (num_int_mod_timer > bd) {
+ val = int_mod_timer[bd];
+ atl1_validate_option(&val, &opt, pdev);
+ adapter->imt = (u16) val;
+ } else
+ adapter->imt = (u16) (opt.def);
+ }
+}
+
+/*
* atl1_pci_tbl - PCI Device ID Table
*/
static const struct pci_device_id atl1_pci_tbl[] = {
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
index 4186326..f06b854 100644
--- a/drivers/net/atlx/atlx.c
+++ b/drivers/net/atlx/atlx.c
@@ -253,181 +253,4 @@ static void atlx_restore_vlan(struct atlx_adapter *adapter)
atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp);
}
-/*
- * This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-#define ATL1_MAX_NIC 4
-
-#define OPTION_UNSET -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED 1
-
-#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
-
-/*
- * Interrupt Moderate Timer in units of 2 us
- *
- * Valid Range: 10-65535
- *
- * Default Value: 100 (200us)
- */
-static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_int_mod_timer;
-module_param_array_named(int_mod_timer, int_mod_timer, int,
- &num_int_mod_timer, 0);
-MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
-
-/*
- * flash_vendor
- *
- * Valid Range: 0-2
- *
- * 0 - Atmel
- * 1 - SST
- * 2 - ST
- *
- * Default Value: 0
- */
-static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_flash_vendor;
-module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
-MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
-
-#define DEFAULT_INT_MOD_CNT 100 /* 200us */
-#define MAX_INT_MOD_CNT 65000
-#define MIN_INT_MOD_CNT 50
-
-#define FLASH_VENDOR_DEFAULT 0
-#define FLASH_VENDOR_MIN 0
-#define FLASH_VENDOR_MAX 2
-
-struct atl1_option {
- enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
- union {
- struct { /* range_option info */
- int min;
- int max;
- } r;
- struct { /* list_option info */
- int nr;
- struct atl1_opt_list {
- int i;
- char *str;
- } *p;
- } l;
- } arg;
-};
-
-static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
- struct pci_dev *pdev)
-{
- if (*value == OPTION_UNSET) {
- *value = opt->def;
- return 0;
- }
-
- switch (opt->type) {
- case enable_option:
- switch (*value) {
- case OPTION_ENABLED:
- dev_info(&pdev->dev, "%s enabled\n", opt->name);
- return 0;
- case OPTION_DISABLED:
- dev_info(&pdev->dev, "%s disabled\n", opt->name);
- return 0;
- }
- break;
- case range_option:
- if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- dev_info(&pdev->dev, "%s set to %i\n", opt->name,
- *value);
- return 0;
- }
- break;
- case list_option:{
- int i;
- struct atl1_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- dev_info(&pdev->dev, "%s\n",
- ent->str);
- return 0;
- }
- }
- }
- break;
-
- default:
- break;
- }
-
- dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
- opt->name, *value, opt->err);
- *value = opt->def;
- return -1;
-}
-
-/*
- * atl1_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input. If an invalid value is given, or if no user specified
- * value exists, a default value is used. The final value is stored
- * in a variable in the adapter structure.
- */
-void __devinit atl1_check_options(struct atl1_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- int bd = adapter->bd_number;
- if (bd >= ATL1_MAX_NIC) {
- dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
- dev_notice(&pdev->dev, "using defaults for all values\n");
- }
- { /* Interrupt Moderate Timer */
- struct atl1_option opt = {
- .type = range_option,
- .name = "Interrupt Moderator Timer",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_INT_MOD_CNT),
- .def = DEFAULT_INT_MOD_CNT,
- .arg = {.r = {.min = MIN_INT_MOD_CNT,
- .max = MAX_INT_MOD_CNT} }
- };
- int val;
- if (num_int_mod_timer > bd) {
- val = int_mod_timer[bd];
- atl1_validate_option(&val, &opt, pdev);
- adapter->imt = (u16) val;
- } else
- adapter->imt = (u16) (opt.def);
- }
-
- { /* Flash Vendor */
- struct atl1_option opt = {
- .type = range_option,
- .name = "SPI Flash Vendor",
- .err = "using default of "
- __MODULE_STRING(FLASH_VENDOR_DEFAULT),
- .def = DEFAULT_INT_MOD_CNT,
- .arg = {.r = {.min = FLASH_VENDOR_MIN,
- .max = FLASH_VENDOR_MAX} }
- };
- int val;
- if (num_flash_vendor > bd) {
- val = flash_vendor[bd];
- atl1_validate_option(&val, &opt, pdev);
- adapter->hw.flash_vendor = (u8) val;
- } else
- adapter->hw.flash_vendor = (u8) (opt.def);
- }
-}
-
#endif /* ATLX_C */
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 194949a..0b4adf4 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -1005,3 +1005,4 @@ module_exit(axdrv_exit);
MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
MODULE_AUTHOR("Ben Dooks, <ben@...tec.co.uk>");
MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ax88796");
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 717dcc1..4fec858 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -47,6 +47,7 @@
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:bfin_mac");
#if defined(CONFIG_BFIN_MAC_USE_L1)
# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
@@ -1089,8 +1090,9 @@ static struct platform_driver bfin_mac_driver = {
.resume = bfin_mac_resume,
.suspend = bfin_mac_suspend,
.driver = {
- .name = DRV_NAME,
- },
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
};
static int __init bfin_mac_init(void)
@@ -1106,3 +1108,4 @@ static void __exit bfin_mac_cleanup(void)
}
module_exit(bfin_mac_cleanup);
+
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 9da7ff4..2b5740b 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -42,6 +42,7 @@
MODULE_AUTHOR("Eugene Konev <ejka@...i.kspu.ru>");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cpmac");
static int debug_level = 8;
static int dumb_switch;
@@ -1103,6 +1104,7 @@ static int __devexit cpmac_remove(struct platform_device *pdev)
static struct platform_driver cpmac_driver = {
.driver.name = "cpmac",
+ .driver.owner = THIS_MODULE,
.probe = cpmac_probe,
.remove = __devexit_p(cpmac_remove),
};
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d63cc93..e6fe261 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1418,3 +1418,4 @@ module_exit(dm9000_cleanup);
MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
MODULE_DESCRIPTION("Davicom DM9000 network driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dm9000");
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 01c8866..462351c 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1326,12 +1326,10 @@ struct e1000_info e1000_82571_info = {
.mac = e1000_82571,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_STATS_ICR_ICT
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_RESET_OVERWRITES_LAA /* errata */
| FLAG_TARC_SPEED_MODE_BIT /* errata */
@@ -1347,12 +1345,10 @@ struct e1000_info e1000_82572_info = {
.mac = e1000_82572,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_STATS_ICR_ICT
| FLAG_TARC_SPEED_MODE_BIT, /* errata */
.pba = 38,
.get_variants = e1000_get_variants_82571,
@@ -1365,11 +1361,9 @@ struct e1000_info e1000_82573_info = {
.mac = e1000_82573,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_STATS_ICR_ICT
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_ERT
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 572cfd4..2a53875 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -184,6 +184,7 @@
#define E1000_SWFW_EEP_SM 0x1
#define E1000_SWFW_PHY0_SM 0x2
#define E1000_SWFW_PHY1_SM 0x4
+#define E1000_SWFW_CSR_SM 0x8
/* Device Control */
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
@@ -527,8 +528,10 @@
#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
/* NVM Control */
#define E1000_EECD_SK 0x00000001 /* NVM Clock */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 5a89dff..38bfd0d 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -64,11 +64,14 @@ struct e1000_info;
/* Tx/Rx descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 4096
-#define E1000_MIN_TXD 80
+#define E1000_MIN_TXD 64
#define E1000_DEFAULT_RXD 256
#define E1000_MAX_RXD 4096
-#define E1000_MIN_RXD 80
+#define E1000_MIN_RXD 64
+
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
/* Early Receive defines */
#define E1000_ERT_2048 0x100
@@ -147,6 +150,18 @@ struct e1000_ring {
struct e1000_queue_stats stats;
};
+/* PHY register snapshot values */
+struct e1000_phy_regs {
+ u16 bmcr; /* basic mode control register */
+ u16 bmsr; /* basic mode status register */
+ u16 advertise; /* auto-negotiation advertisement */
+ u16 lpa; /* link partner ability register */
+ u16 expansion; /* auto-negotiation expansion reg */
+ u16 ctrl1000; /* 1000BASE-T control register */
+ u16 stat1000; /* 1000BASE-T status register */
+ u16 estatus; /* extended status register */
+};
+
/* board specific private data structure */
struct e1000_adapter {
struct timer_list watchdog_timer;
@@ -202,8 +217,8 @@ struct e1000_adapter {
/* Tx stats */
u64 tpt_old;
u64 colc_old;
- u64 gotcl_old;
- u32 gotcl;
+ u32 gotc;
+ u64 gotc_old;
u32 tx_timeout_count;
u32 tx_fifo_head;
u32 tx_head_addr;
@@ -227,8 +242,8 @@ struct e1000_adapter {
u64 hw_csum_err;
u64 hw_csum_good;
u64 rx_hdr_split;
- u64 gorcl_old;
- u32 gorcl;
+ u32 gorc;
+ u64 gorc_old;
u32 alloc_rx_buff_failed;
u32 rx_dma_failed;
@@ -250,6 +265,9 @@ struct e1000_adapter {
struct e1000_phy_info phy_info;
struct e1000_phy_stats phy_stats;
+ /* Snapshot of PHY registers */
+ struct e1000_phy_regs phy_regs;
+
struct e1000_ring test_tx_ring;
struct e1000_ring test_rx_ring;
u32 test_icr;
@@ -286,8 +304,6 @@ struct e1000_info {
#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
-#define FLAG_HAS_STATS_ICR_ICT (1 << 9)
-#define FLAG_HAS_STATS_PTC_PRC (1 << 10)
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_IS_QUAD_PORT_A (1 << 12)
#define FLAG_IS_QUAD_PORT (1 << 13)
@@ -433,6 +449,8 @@ extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
+extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index d59a99a..dc552d7 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -41,6 +41,7 @@
#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
@@ -48,6 +49,7 @@
#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
@@ -85,6 +87,9 @@
/* Kumeran Mode Control Register (Page 193, Register 16) */
#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY 0x5
+
/* Power Management Control Register (Page 193, Register 20) */
#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
/* 1=Enable SERDES Electrical Idle */
@@ -270,6 +275,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
u16 mask;
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ mask |= E1000_SWFW_CSR_SM;
return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
}
@@ -286,6 +292,8 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
u16 mask;
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ mask |= E1000_SWFW_CSR_SM;
+
e1000_release_swfw_sync_80003es2lan(hw, mask);
}
@@ -410,20 +418,27 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
u32 page_select;
u16 temp;
+ ret_val = e1000_acquire_phy_80003es2lan(hw);
+ if (ret_val)
+ return ret_val;
+
/* Select Configuration Page */
- if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
+ if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
page_select = GG82563_PHY_PAGE_SELECT;
- else
+ } else {
/*
* Use Alternative Page Select register to access
* registers 30 and 31
*/
page_select = GG82563_PHY_PAGE_SELECT_ALT;
+ }
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
- ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
- if (ret_val)
+ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+ if (ret_val) {
+ e1000_release_phy_80003es2lan(hw);
return ret_val;
+ }
/*
* The "ready" bit in the MDIC register may be incorrectly set
@@ -433,20 +448,21 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
/* ...and verify the command was successful. */
- ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
+ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
ret_val = -E1000_ERR_PHY;
+ e1000_release_phy_80003es2lan(hw);
return ret_val;
}
udelay(200);
- ret_val = e1000e_read_phy_reg_m88(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
+ e1000_release_phy_80003es2lan(hw);
return ret_val;
}
@@ -467,20 +483,27 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
u32 page_select;
u16 temp;
+ ret_val = e1000_acquire_phy_80003es2lan(hw);
+ if (ret_val)
+ return ret_val;
+
/* Select Configuration Page */
- if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
+ if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
page_select = GG82563_PHY_PAGE_SELECT;
- else
+ } else {
/*
* Use Alternative Page Select register to access
* registers 30 and 31
*/
page_select = GG82563_PHY_PAGE_SELECT_ALT;
+ }
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
- ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
- if (ret_val)
+ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+ if (ret_val) {
+ e1000_release_phy_80003es2lan(hw);
return ret_val;
+ }
/*
@@ -491,18 +514,20 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
/* ...and verify the command was successful. */
- ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
+ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
- if (((u16)offset >> GG82563_PAGE_SHIFT) != temp)
+ if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+ e1000_release_phy_80003es2lan(hw);
return -E1000_ERR_PHY;
+ }
udelay(200);
- ret_val = e1000e_write_phy_reg_m88(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
+ e1000_release_phy_80003es2lan(hw);
return ret_val;
}
@@ -882,10 +907,10 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u32 ctrl_ext;
- u16 data;
+ u32 i = 0;
+ u16 data, data2;
- ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
- &data);
+ ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
if (ret_val)
return ret_val;
@@ -893,8 +918,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
/* Use 25MHz for both link down and 1000Base-T for Tx clock. */
data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
- ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
- data);
+ ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
if (ret_val)
return ret_val;
@@ -954,6 +978,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
+ &data);
+ if (ret_val)
+ return ret_val;
+ data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
+ data);
+ if (ret_val)
+ return ret_val;
+
ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
if (ret_val)
return ret_val;
@@ -983,9 +1019,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
- if (ret_val)
- return ret_val;
+ do {
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ &data2);
+ if (ret_val)
+ return ret_val;
+ i++;
+ } while ((data != data2) && (i < GG82563_MAX_KMRN_RETRY));
data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
@@ -1074,7 +1119,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
{
s32 ret_val;
u32 tipg;
- u16 reg_data;
+ u32 i = 0;
+ u16 reg_data, reg_data2;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
@@ -1088,9 +1134,16 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
ew32(TIPG, tipg);
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
- if (ret_val)
- return ret_val;
+ do {
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
+ if (ret_val)
+ return ret_val;
+ i++;
+ } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
if (duplex == HALF_DUPLEX)
reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
@@ -1112,8 +1165,9 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
{
s32 ret_val;
- u16 reg_data;
+ u16 reg_data, reg_data2;
u32 tipg;
+ u32 i = 0;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
@@ -1127,9 +1181,16 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
ew32(TIPG, tipg);
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
- if (ret_val)
- return ret_val;
+ do {
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
+ if (ret_val)
+ return ret_val;
+ i++;
+ } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
@@ -1231,12 +1292,10 @@ struct e1000_info e1000_es2_info = {
.mac = e1000_80003es2lan,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_STATS_ICR_ICT
| FLAG_RX_NEEDS_RESTART /* errata */
| FLAG_TARC_SET_BIT_ZERO /* errata */
| FLAG_APME_CHECK_PORT_B
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 6d1b257..ce045ac 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -46,8 +46,8 @@ struct e1000_stats {
static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_packets", E1000_STAT(stats.gprc) },
{ "tx_packets", E1000_STAT(stats.gptc) },
- { "rx_bytes", E1000_STAT(stats.gorcl) },
- { "tx_bytes", E1000_STAT(stats.gotcl) },
+ { "rx_bytes", E1000_STAT(stats.gorc) },
+ { "tx_bytes", E1000_STAT(stats.gotc) },
{ "rx_broadcast", E1000_STAT(stats.bprc) },
{ "tx_broadcast", E1000_STAT(stats.bptc) },
{ "rx_multicast", E1000_STAT(stats.mprc) },
@@ -83,7 +83,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
- { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
+ { "rx_long_byte_count", E1000_STAT(stats.gorc) },
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
{ "rx_header_split", E1000_STAT(rx_hdr_split) },
@@ -1770,6 +1770,47 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
return 0;
}
+static int e1000_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
+static int e1000_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if (ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = 20000;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
+ adapter->itr_setting = adapter->itr & ~3;
+ }
+
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ else
+ ew32(ITR, 0);
+
+ return 0;
+}
+
static int e1000_nway_reset(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1845,6 +1886,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.phys_id = e1000_phys_id,
.get_ethtool_stats = e1000_get_ethtool_stats,
.get_sset_count = e1000e_get_sset_count,
+ .get_coalesce = e1000_get_coalesce,
+ .set_coalesce = e1000_set_coalesce,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 53f1ac6..a930e6d 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -592,10 +592,8 @@ struct e1000_hw_stats {
u64 bprc;
u64 mprc;
u64 gptc;
- u64 gorcl;
- u64 gorch;
- u64 gotcl;
- u64 gotch;
+ u64 gorc;
+ u64 gotc;
u64 rnbc;
u64 ruc;
u64 rfc;
@@ -604,10 +602,8 @@ struct e1000_hw_stats {
u64 mgprc;
u64 mgpdc;
u64 mgptc;
- u64 torl;
- u64 torh;
- u64 totl;
- u64 toth;
+ u64 tor;
+ u64 tot;
u64 tpr;
u64 tpt;
u64 ptc64;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c8dc47f..8991ab8 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -46,7 +46,7 @@
#include "e1000.h"
-#define DRV_VERSION "0.2.0"
+#define DRV_VERSION "0.2.1"
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -466,10 +466,10 @@ next_desc:
if (cleaned_count)
adapter->alloc_rx_buf(adapter, cleaned_count);
- adapter->total_rx_packets += total_rx_packets;
adapter->total_rx_bytes += total_rx_bytes;
- adapter->net_stats.rx_packets += total_rx_packets;
+ adapter->total_rx_packets += total_rx_packets;
adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
return cleaned;
}
@@ -606,8 +606,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
}
adapter->total_tx_bytes += total_tx_bytes;
adapter->total_tx_packets += total_tx_packets;
- adapter->net_stats.tx_packets += total_tx_packets;
adapter->net_stats.tx_bytes += total_tx_bytes;
+ adapter->net_stats.tx_packets += total_tx_packets;
return cleaned;
}
@@ -775,10 +775,10 @@ next_desc:
if (cleaned_count)
adapter->alloc_rx_buf(adapter, cleaned_count);
- adapter->total_rx_packets += total_rx_packets;
adapter->total_rx_bytes += total_rx_bytes;
- adapter->net_stats.rx_packets += total_rx_packets;
+ adapter->total_rx_packets += total_rx_packets;
adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
return cleaned;
}
@@ -2506,56 +2506,27 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
adapter->stats.crcerrs += er32(CRCERRS);
adapter->stats.gprc += er32(GPRC);
- adapter->stats.gorcl += er32(GORCL);
- adapter->stats.gorch += er32(GORCH);
+ adapter->stats.gorc += er32(GORCL);
+ er32(GORCH); /* Clear gorc */
adapter->stats.bprc += er32(BPRC);
adapter->stats.mprc += er32(MPRC);
adapter->stats.roc += er32(ROC);
- if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) {
- adapter->stats.prc64 += er32(PRC64);
- adapter->stats.prc127 += er32(PRC127);
- adapter->stats.prc255 += er32(PRC255);
- adapter->stats.prc511 += er32(PRC511);
- adapter->stats.prc1023 += er32(PRC1023);
- adapter->stats.prc1522 += er32(PRC1522);
- adapter->stats.symerrs += er32(SYMERRS);
- adapter->stats.sec += er32(SEC);
- }
-
adapter->stats.mpc += er32(MPC);
adapter->stats.scc += er32(SCC);
adapter->stats.ecol += er32(ECOL);
adapter->stats.mcc += er32(MCC);
adapter->stats.latecol += er32(LATECOL);
adapter->stats.dc += er32(DC);
- adapter->stats.rlec += er32(RLEC);
adapter->stats.xonrxc += er32(XONRXC);
adapter->stats.xontxc += er32(XONTXC);
adapter->stats.xoffrxc += er32(XOFFRXC);
adapter->stats.xofftxc += er32(XOFFTXC);
- adapter->stats.fcruc += er32(FCRUC);
adapter->stats.gptc += er32(GPTC);
- adapter->stats.gotcl += er32(GOTCL);
- adapter->stats.gotch += er32(GOTCH);
+ adapter->stats.gotc += er32(GOTCL);
+ er32(GOTCH); /* Clear gotc */
adapter->stats.rnbc += er32(RNBC);
adapter->stats.ruc += er32(RUC);
- adapter->stats.rfc += er32(RFC);
- adapter->stats.rjc += er32(RJC);
- adapter->stats.torl += er32(TORL);
- adapter->stats.torh += er32(TORH);
- adapter->stats.totl += er32(TOTL);
- adapter->stats.toth += er32(TOTH);
- adapter->stats.tpr += er32(TPR);
-
- if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) {
- adapter->stats.ptc64 += er32(PTC64);
- adapter->stats.ptc127 += er32(PTC127);
- adapter->stats.ptc255 += er32(PTC255);
- adapter->stats.ptc511 += er32(PTC511);
- adapter->stats.ptc1023 += er32(PTC1023);
- adapter->stats.ptc1522 += er32(PTC1522);
- }
adapter->stats.mptc += er32(MPTC);
adapter->stats.bptc += er32(BPTC);
@@ -2574,19 +2545,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
adapter->stats.tsctc += er32(TSCTC);
adapter->stats.tsctfc += er32(TSCTFC);
- adapter->stats.iac += er32(IAC);
-
- if (adapter->flags & FLAG_HAS_STATS_ICR_ICT) {
- adapter->stats.icrxoc += er32(ICRXOC);
- adapter->stats.icrxptc += er32(ICRXPTC);
- adapter->stats.icrxatc += er32(ICRXATC);
- adapter->stats.ictxptc += er32(ICTXPTC);
- adapter->stats.ictxatc += er32(ICTXATC);
- adapter->stats.ictxqec += er32(ICTXQEC);
- adapter->stats.ictxqmtc += er32(ICTXQMTC);
- adapter->stats.icrxdmtc += er32(ICRXDMTC);
- }
-
/* Fill out the OS statistics structure */
adapter->net_stats.multicast = adapter->stats.mprc;
adapter->net_stats.collisions = adapter->stats.colc;
@@ -2633,6 +2591,54 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
}
+/**
+ * e1000_phy_read_status - Update the PHY register status snapshot
+ * @adapter: board private structure
+ **/
+static void e1000_phy_read_status(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_phy_regs *phy = &adapter->phy_regs;
+ int ret_val;
+ unsigned long irq_flags;
+
+
+ spin_lock_irqsave(&adapter->stats_lock, irq_flags);
+
+ if ((er32(STATUS) & E1000_STATUS_LU) &&
+ (adapter->hw.phy.media_type == e1000_media_type_copper)) {
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
+ ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
+ ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
+ ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
+ ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
+ ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
+ ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
+ ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
+ if (ret_val)
+ ndev_warn(adapter->netdev,
+ "Error reading PHY register\n");
+ } else {
+ /*
+ * Do not read PHY registers if link is not up
+ * Set values to typical power-on defaults
+ */
+ phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
+ phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
+ BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
+ BMSR_ERCAP);
+ phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ phy->lpa = 0;
+ phy->expansion = EXPANSION_ENABLENPAGE;
+ phy->ctrl1000 = ADVERTISE_1000FULL;
+ phy->stat1000 = 0;
+ phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
+ }
+
+ spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
+}
+
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -2745,6 +2751,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (!netif_carrier_ok(netdev)) {
bool txb2b = 1;
/* update snapshot of PHY registers on LSC */
+ e1000_phy_read_status(adapter);
mac->ops.get_link_up_info(&adapter->hw,
&adapter->link_speed,
&adapter->link_duplex);
@@ -2842,10 +2849,10 @@ link_up:
mac->collision_delta = adapter->stats.colc - adapter->colc_old;
adapter->colc_old = adapter->stats.colc;
- adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
- adapter->gorcl_old = adapter->stats.gorcl;
- adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
- adapter->gotcl_old = adapter->stats.gotcl;
+ adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
+ adapter->gorc_old = adapter->stats.gorc;
+ adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
+ adapter->gotc_old = adapter->stats.gotc;
e1000e_update_adaptive(&adapter->hw);
@@ -3500,7 +3507,6 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct mii_ioctl_data *data = if_mii(ifr);
- unsigned long irq_flags;
if (adapter->hw.phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
@@ -3512,13 +3518,40 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
case SIOCGMIIREG:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- spin_lock_irqsave(&adapter->stats_lock, irq_flags);
- if (e1e_rphy(&adapter->hw, data->reg_num & 0x1F,
- &data->val_out)) {
- spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
+ switch (data->reg_num & 0x1F) {
+ case MII_BMCR:
+ data->val_out = adapter->phy_regs.bmcr;
+ break;
+ case MII_BMSR:
+ data->val_out = adapter->phy_regs.bmsr;
+ break;
+ case MII_PHYSID1:
+ data->val_out = (adapter->hw.phy.id >> 16);
+ break;
+ case MII_PHYSID2:
+ data->val_out = (adapter->hw.phy.id & 0xFFFF);
+ break;
+ case MII_ADVERTISE:
+ data->val_out = adapter->phy_regs.advertise;
+ break;
+ case MII_LPA:
+ data->val_out = adapter->phy_regs.lpa;
+ break;
+ case MII_EXPANSION:
+ data->val_out = adapter->phy_regs.expansion;
+ break;
+ case MII_CTRL1000:
+ data->val_out = adapter->phy_regs.ctrl1000;
+ break;
+ case MII_STAT1000:
+ data->val_out = adapter->phy_regs.stat1000;
+ break;
+ case MII_ESTATUS:
+ data->val_out = adapter->phy_regs.estatus;
+ break;
+ default:
return -EIO;
}
- spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
break;
case SIOCSMIIREG:
default:
@@ -3774,6 +3807,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
+ pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
@@ -3900,6 +3934,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
goto err_pci_reg;
pci_set_master(pdev);
+ pci_save_state(pdev);
err = -ENOMEM;
netdev = alloc_etherdev(sizeof(struct e1000_adapter));
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3a4574c..e102332 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -116,7 +116,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
}
/**
- * e1000_read_phy_reg_mdic - Read MDI control register
+ * e1000e_read_phy_reg_mdic - Read MDI control register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
@@ -124,7 +124,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
* Reads the MDI control register in the PHY at offset and stores the
* information read to data.
**/
-static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
{
struct e1000_phy_info *phy = &hw->phy;
u32 i, mdic = 0;
@@ -150,7 +150,7 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
* Increasing the time out as testing showed failures with
* the lower time out
*/
- for (i = 0; i < 64; i++) {
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
udelay(50);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
@@ -170,14 +170,14 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
- * e1000_write_phy_reg_mdic - Write MDI control register
+ * e1000e_write_phy_reg_mdic - Write MDI control register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write to register at offset
*
* Writes data to MDI control register in the PHY at offset.
**/
-static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
{
struct e1000_phy_info *phy = &hw->phy;
u32 i, mdic = 0;
@@ -199,9 +199,13 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
ew32(MDIC, mdic);
- /* Poll the ready bit to see if the MDI read completed */
- for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
- udelay(5);
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
@@ -210,6 +214,10 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
hw_dbg(hw, "MDI Write did not complete\n");
return -E1000_ERR_PHY;
}
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg(hw, "MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
return 0;
}
@@ -232,9 +240,8 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
if (ret_val)
return ret_val;
- ret_val = e1000_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
hw->phy.ops.release_phy(hw);
@@ -258,9 +265,8 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
if (ret_val)
return ret_val;
- ret_val = e1000_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
hw->phy.ops.release_phy(hw);
@@ -286,18 +292,17 @@ s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
return ret_val;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = e1000_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
if (ret_val) {
hw->phy.ops.release_phy(hw);
return ret_val;
}
}
- ret_val = e1000_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
hw->phy.ops.release_phy(hw);
@@ -322,18 +327,17 @@ s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
return ret_val;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = e1000_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
if (ret_val) {
hw->phy.ops.release_phy(hw);
return ret_val;
}
}
- ret_val = e1000_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
hw->phy.ops.release_phy(hw);
@@ -420,7 +424,9 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ /* For newer PHYs this bit is downshift enable */
+ if (phy->type == e1000_phy_m88)
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
/*
* Options:
@@ -463,7 +469,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- if (phy->revision < 4) {
+ if ((phy->type == e1000_phy_m88) && (phy->revision < 4)) {
/*
* Force TX_CLK in the Extended PHY Specific Control Register
* to 25MHz clock.
@@ -518,8 +524,11 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
return ret_val;
}
- /* Wait 15ms for MAC to configure PHY from NVM settings. */
- msleep(15);
+ /*
+ * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+ * timeout issues when LFS is enabled.
+ */
+ msleep(100);
/* disable lplu d0 during driver init */
ret_val = e1000_set_d0_lplu_state(hw, 0);
@@ -1152,9 +1161,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
if (!active) {
data &= ~IGP02E1000_PM_D3_LPLU;
- ret_val = e1e_wphy(hw,
- IGP02E1000_PHY_POWER_MGMT,
- data);
+ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
if (ret_val)
return ret_val;
/*
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 9ff7538..f9bc21c 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2611,7 +2611,7 @@ static int ehea_stop(struct net_device *dev)
return ret;
}
-void ehea_purge_sq(struct ehea_qp *orig_qp)
+static void ehea_purge_sq(struct ehea_qp *orig_qp)
{
struct ehea_qp qp = *orig_qp;
struct ehea_qp_init_attr *init_attr = &qp.init_attr;
@@ -2625,7 +2625,7 @@ void ehea_purge_sq(struct ehea_qp *orig_qp)
}
}
-void ehea_flush_sq(struct ehea_port *port)
+static void ehea_flush_sq(struct ehea_port *port)
{
int i;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 8c4214b..35f66d4 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -96,6 +96,7 @@
#define DEV_HAS_PAUSEFRAME_TX_V2 0x10000 /* device supports tx pause frames version 2 */
#define DEV_HAS_PAUSEFRAME_TX_V3 0x20000 /* device supports tx pause frames version 3 */
#define DEV_NEED_TX_LIMIT 0x40000 /* device needs to limit tx */
+#define DEV_HAS_GEAR_MODE 0x80000 /* device supports gear mode */
enum {
NvRegIrqStatus = 0x000,
@@ -174,11 +175,13 @@ enum {
NvRegReceiverStatus = 0x98,
#define NVREG_RCVSTAT_BUSY 0x01
- NvRegRandomSeed = 0x9c,
-#define NVREG_RNDSEED_MASK 0x00ff
-#define NVREG_RNDSEED_FORCE 0x7f00
-#define NVREG_RNDSEED_FORCE2 0x2d00
-#define NVREG_RNDSEED_FORCE3 0x7400
+ NvRegSlotTime = 0x9c,
+#define NVREG_SLOTTIME_LEGBF_ENABLED 0x80000000
+#define NVREG_SLOTTIME_10_100_FULL 0x00007f00
+#define NVREG_SLOTTIME_1000_FULL 0x0003ff00
+#define NVREG_SLOTTIME_HALF 0x0000ff00
+#define NVREG_SLOTTIME_DEFAULT 0x00007f00
+#define NVREG_SLOTTIME_MASK 0x000000ff
NvRegTxDeferral = 0xA0,
#define NVREG_TX_DEFERRAL_DEFAULT 0x15050f
@@ -201,6 +204,11 @@ enum {
NvRegPhyInterface = 0xC0,
#define PHY_RGMII 0x10000000
+ NvRegBackOffControl = 0xC4,
+#define NVREG_BKOFFCTRL_DEFAULT 0x70000000
+#define NVREG_BKOFFCTRL_SEED_MASK 0x000003ff
+#define NVREG_BKOFFCTRL_SELECT 24
+#define NVREG_BKOFFCTRL_GEAR 12
NvRegTxRingPhysAddr = 0x100,
NvRegRxRingPhysAddr = 0x104,
@@ -352,6 +360,7 @@ union ring_type {
#define NV_TX_LASTPACKET (1<<16)
#define NV_TX_RETRYERROR (1<<19)
+#define NV_TX_RETRYCOUNT_MASK (0xF<<20)
#define NV_TX_FORCED_INTERRUPT (1<<24)
#define NV_TX_DEFERRED (1<<26)
#define NV_TX_CARRIERLOST (1<<27)
@@ -362,6 +371,7 @@ union ring_type {
#define NV_TX2_LASTPACKET (1<<29)
#define NV_TX2_RETRYERROR (1<<18)
+#define NV_TX2_RETRYCOUNT_MASK (0xF<<19)
#define NV_TX2_FORCED_INTERRUPT (1<<30)
#define NV_TX2_DEFERRED (1<<25)
#define NV_TX2_CARRIERLOST (1<<26)
@@ -473,16 +483,22 @@ union ring_type {
#define DESC_VER_3 3
/* PHY defines */
-#define PHY_OUI_MARVELL 0x5043
-#define PHY_OUI_CICADA 0x03f1
-#define PHY_OUI_VITESSE 0x01c1
-#define PHY_OUI_REALTEK 0x0732
+#define PHY_OUI_MARVELL 0x5043
+#define PHY_OUI_CICADA 0x03f1
+#define PHY_OUI_VITESSE 0x01c1
+#define PHY_OUI_REALTEK 0x0732
+#define PHY_OUI_REALTEK2 0x0020
#define PHYID1_OUI_MASK 0x03ff
#define PHYID1_OUI_SHFT 6
#define PHYID2_OUI_MASK 0xfc00
#define PHYID2_OUI_SHFT 10
#define PHYID2_MODEL_MASK 0x03f0
-#define PHY_MODEL_MARVELL_E3016 0x220
+#define PHY_MODEL_REALTEK_8211 0x0110
+#define PHY_REV_MASK 0x0001
+#define PHY_REV_REALTEK_8211B 0x0000
+#define PHY_REV_REALTEK_8211C 0x0001
+#define PHY_MODEL_REALTEK_8201 0x0200
+#define PHY_MODEL_MARVELL_E3016 0x0220
#define PHY_MARVELL_E3016_INITMASK 0x0300
#define PHY_CICADA_INIT1 0x0f000
#define PHY_CICADA_INIT2 0x0e00
@@ -509,10 +525,18 @@ union ring_type {
#define PHY_REALTEK_INIT_REG1 0x1f
#define PHY_REALTEK_INIT_REG2 0x19
#define PHY_REALTEK_INIT_REG3 0x13
+#define PHY_REALTEK_INIT_REG4 0x14
+#define PHY_REALTEK_INIT_REG5 0x18
+#define PHY_REALTEK_INIT_REG6 0x11
#define PHY_REALTEK_INIT1 0x0000
#define PHY_REALTEK_INIT2 0x8e00
#define PHY_REALTEK_INIT3 0x0001
#define PHY_REALTEK_INIT4 0xad17
+#define PHY_REALTEK_INIT5 0xfb54
+#define PHY_REALTEK_INIT6 0xf5c7
+#define PHY_REALTEK_INIT7 0x1000
+#define PHY_REALTEK_INIT8 0x0003
+#define PHY_REALTEK_INIT_MSK1 0x0003
#define PHY_GIGABIT 0x0100
@@ -691,6 +715,7 @@ struct fe_priv {
int wolenabled;
unsigned int phy_oui;
unsigned int phy_model;
+ unsigned int phy_rev;
u16 gigabit;
int intr_test;
int recover_error;
@@ -704,6 +729,7 @@ struct fe_priv {
u32 txrxctl_bits;
u32 vlanctl_bits;
u32 driver_data;
+ u32 device_id;
u32 register_size;
int rx_csum;
u32 mac_in_use;
@@ -814,6 +840,16 @@ enum {
};
static int dma_64bit = NV_DMA_64BIT_ENABLED;
+/*
+ * Crossover Detection
+ * Realtek 8201 phy + some OEM boards do not work properly.
+ */
+enum {
+ NV_CROSSOVER_DETECTION_DISABLED,
+ NV_CROSSOVER_DETECTION_ENABLED
+};
+static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
@@ -1078,25 +1114,53 @@ static int phy_init(struct net_device *dev)
}
}
if (np->phy_oui == PHY_OUI_REALTEK) {
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+ np->phy_rev == PHY_REV_REALTEK_8211B) {
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
}
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8201) {
+ if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+ phy_reserved |= PHY_REALTEK_INIT7;
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
}
}
@@ -1236,26 +1300,71 @@ static int phy_init(struct net_device *dev)
}
}
if (np->phy_oui == PHY_OUI_REALTEK) {
- /* reset could have cleared these out, set them back */
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+ np->phy_rev == PHY_REV_REALTEK_8211B) {
+ /* reset could have cleared these out, set them back */
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
}
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8201) {
+ if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+ phy_reserved |= PHY_REALTEK_INIT7;
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
+ if (phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
+ phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
+ phy_reserved |= PHY_REALTEK_INIT3;
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
}
}
@@ -1769,6 +1878,115 @@ static inline u32 nv_get_empty_tx_slots(struct fe_priv *np)
return (u32)(np->tx_ring_size - ((np->tx_ring_size + (np->put_tx_ctx - np->get_tx_ctx)) % np->tx_ring_size));
}
+static void nv_legacybackoff_reseed(struct net_device *dev)
+{
+ u8 __iomem *base = get_hwbase(dev);
+ u32 reg;
+ u32 low;
+ int tx_status = 0;
+
+ reg = readl(base + NvRegSlotTime) & ~NVREG_SLOTTIME_MASK;
+ get_random_bytes(&low, sizeof(low));
+ reg |= low & NVREG_SLOTTIME_MASK;
+
+ /* Need to stop tx before change takes effect.
+ * Caller has already gained np->lock.
+ */
+ tx_status = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_START;
+ if (tx_status)
+ nv_stop_tx(dev);
+ nv_stop_rx(dev);
+ writel(reg, base + NvRegSlotTime);
+ if (tx_status)
+ nv_start_tx(dev);
+ nv_start_rx(dev);
+}
+
+/* Gear Backoff Seeds */
+#define BACKOFF_SEEDSET_ROWS 8
+#define BACKOFF_SEEDSET_LFSRS 15
+
+/* Known Good seed sets */
+static const u32 main_seedset[BACKOFF_SEEDSET_ROWS][BACKOFF_SEEDSET_LFSRS] = {
+ {145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
+ {245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 385, 761, 790, 974},
+ {145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
+ {245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 386, 761, 790, 974},
+ {266, 265, 276, 585, 397, 208, 345, 355, 365, 376, 385, 396, 771, 700, 984},
+ {266, 265, 276, 586, 397, 208, 346, 355, 365, 376, 285, 396, 771, 700, 984},
+ {366, 365, 376, 686, 497, 308, 447, 455, 466, 476, 485, 496, 871, 800, 84},
+ {466, 465, 476, 786, 597, 408, 547, 555, 566, 576, 585, 597, 971, 900, 184}};
+
+static const u32 gear_seedset[BACKOFF_SEEDSET_ROWS][BACKOFF_SEEDSET_LFSRS] = {
+ {251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375, 30, 295},
+ {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
+ {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 397},
+ {251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375, 30, 295},
+ {251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375, 30, 295},
+ {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
+ {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
+ {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395}};
+
+static void nv_gear_backoff_reseed(struct net_device *dev)
+{
+ u8 __iomem *base = get_hwbase(dev);
+ u32 miniseed1, miniseed2, miniseed2_reversed, miniseed3, miniseed3_reversed;
+ u32 temp, seedset, combinedSeed;
+ int i;
+
+ /* Setup seed for free running LFSR */
+ /* We are going to read the time stamp counter 3 times
+ and swizzle bits around to increase randomness */
+ get_random_bytes(&miniseed1, sizeof(miniseed1));
+ miniseed1 &= 0x0fff;
+ if (miniseed1 == 0)
+ miniseed1 = 0xabc;
+
+ get_random_bytes(&miniseed2, sizeof(miniseed2));
+ miniseed2 &= 0x0fff;
+ if (miniseed2 == 0)
+ miniseed2 = 0xabc;
+ miniseed2_reversed =
+ ((miniseed2 & 0xF00) >> 8) |
+ (miniseed2 & 0x0F0) |
+ ((miniseed2 & 0x00F) << 8);
+
+ get_random_bytes(&miniseed3, sizeof(miniseed3));
+ miniseed3 &= 0x0fff;
+ if (miniseed3 == 0)
+ miniseed3 = 0xabc;
+ miniseed3_reversed =
+ ((miniseed3 & 0xF00) >> 8) |
+ (miniseed3 & 0x0F0) |
+ ((miniseed3 & 0x00F) << 8);
+
+ combinedSeed = ((miniseed1 ^ miniseed2_reversed) << 12) |
+ (miniseed2 ^ miniseed3_reversed);
+
+ /* Seeds can not be zero */
+ if ((combinedSeed & NVREG_BKOFFCTRL_SEED_MASK) == 0)
+ combinedSeed |= 0x08;
+ if ((combinedSeed & (NVREG_BKOFFCTRL_SEED_MASK << NVREG_BKOFFCTRL_GEAR)) == 0)
+ combinedSeed |= 0x8000;
+
+ /* No need to disable tx here */
+ temp = NVREG_BKOFFCTRL_DEFAULT | (0 << NVREG_BKOFFCTRL_SELECT);
+ temp |= combinedSeed & NVREG_BKOFFCTRL_SEED_MASK;
+ temp |= combinedSeed >> NVREG_BKOFFCTRL_GEAR;
+ writel(temp,base + NvRegBackOffControl);
+
+ /* Setup seeds for all gear LFSRs. */
+ get_random_bytes(&seedset, sizeof(seedset));
+ seedset = seedset % BACKOFF_SEEDSET_ROWS;
+ for (i = 1; i <= BACKOFF_SEEDSET_LFSRS; i++)
+ {
+ temp = NVREG_BKOFFCTRL_DEFAULT | (i << NVREG_BKOFFCTRL_SELECT);
+ temp |= main_seedset[seedset][i-1] & 0x3ff;
+ temp |= ((gear_seedset[seedset][i-1] & 0x3ff) << NVREG_BKOFFCTRL_GEAR);
+ writel(temp, base + NvRegBackOffControl);
+ }
+}
+
/*
* nv_start_xmit: dev->hard_start_xmit function
* Called with netif_tx_lock held.
@@ -2088,6 +2306,8 @@ static void nv_tx_done(struct net_device *dev)
dev->stats.tx_fifo_errors++;
if (flags & NV_TX_CARRIERLOST)
dev->stats.tx_carrier_errors++;
+ if ((flags & NV_TX_RETRYERROR) && !(flags & NV_TX_RETRYCOUNT_MASK))
+ nv_legacybackoff_reseed(dev);
dev->stats.tx_errors++;
} else {
dev->stats.tx_packets++;
@@ -2103,6 +2323,8 @@ static void nv_tx_done(struct net_device *dev)
dev->stats.tx_fifo_errors++;
if (flags & NV_TX2_CARRIERLOST)
dev->stats.tx_carrier_errors++;
+ if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK))
+ nv_legacybackoff_reseed(dev);
dev->stats.tx_errors++;
} else {
dev->stats.tx_packets++;
@@ -2144,6 +2366,15 @@ static void nv_tx_done_optimized(struct net_device *dev, int limit)
if (flags & NV_TX2_LASTPACKET) {
if (!(flags & NV_TX2_ERROR))
dev->stats.tx_packets++;
+ else {
+ if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK)) {
+ if (np->driver_data & DEV_HAS_GEAR_MODE)
+ nv_gear_backoff_reseed(dev);
+ else
+ nv_legacybackoff_reseed(dev);
+ }
+ }
+
dev_kfree_skb_any(np->get_tx_ctx->skb);
np->get_tx_ctx->skb = NULL;
@@ -2905,15 +3136,14 @@ set_speed:
}
if (np->gigabit == PHY_GIGABIT) {
- phyreg = readl(base + NvRegRandomSeed);
+ phyreg = readl(base + NvRegSlotTime);
phyreg &= ~(0x3FF00);
- if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_10)
- phyreg |= NVREG_RNDSEED_FORCE3;
- else if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_100)
- phyreg |= NVREG_RNDSEED_FORCE2;
+ if (((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_10) ||
+ ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_100))
+ phyreg |= NVREG_SLOTTIME_10_100_FULL;
else if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_1000)
- phyreg |= NVREG_RNDSEED_FORCE;
- writel(phyreg, base + NvRegRandomSeed);
+ phyreg |= NVREG_SLOTTIME_1000_FULL;
+ writel(phyreg, base + NvRegSlotTime);
}
phyreg = readl(base + NvRegPhyInterface);
@@ -4843,6 +5073,7 @@ static int nv_open(struct net_device *dev)
u8 __iomem *base = get_hwbase(dev);
int ret = 1;
int oom, i;
+ u32 low;
dprintk(KERN_DEBUG "nv_open: begin\n");
@@ -4902,8 +5133,20 @@ static int nv_open(struct net_device *dev)
writel(np->rx_buf_sz, base + NvRegOffloadConfig);
writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
- get_random_bytes(&i, sizeof(i));
- writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
+
+ get_random_bytes(&low, sizeof(low));
+ low &= NVREG_SLOTTIME_MASK;
+ if (np->desc_ver == DESC_VER_1) {
+ writel(low|NVREG_SLOTTIME_DEFAULT, base + NvRegSlotTime);
+ } else {
+ if (!(np->driver_data & DEV_HAS_GEAR_MODE)) {
+ /* setup legacy backoff */
+ writel(NVREG_SLOTTIME_LEGBF_ENABLED|NVREG_SLOTTIME_10_100_FULL|low, base + NvRegSlotTime);
+ } else {
+ writel(NVREG_SLOTTIME_10_100_FULL, base + NvRegSlotTime);
+ nv_gear_backoff_reseed(dev);
+ }
+ }
writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral);
writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral);
if (poll_interval == -1) {
@@ -5110,6 +5353,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
/* copy of driver data */
np->driver_data = id->driver_data;
+ /* copy of device id */
+ np->device_id = id->device;
/* handle different descriptor versions */
if (id->driver_data & DEV_HAS_HIGH_DMA) {
@@ -5399,6 +5644,14 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
pci_name(pci_dev), id1, id2, phyaddr);
np->phyaddr = phyaddr;
np->phy_oui = id1 | id2;
+
+ /* Realtek hardcoded phy id1 to all zero's on certain phys */
+ if (np->phy_oui == PHY_OUI_REALTEK2)
+ np->phy_oui = PHY_OUI_REALTEK;
+ /* Setup phy revision for Realtek */
+ if (np->phy_oui == PHY_OUI_REALTEK && np->phy_model == PHY_MODEL_REALTEK_8211)
+ np->phy_rev = mii_rw(dev, phyaddr, MII_RESV1, MII_READ) & PHY_REV_MASK;
+
break;
}
if (i == 33) {
@@ -5477,6 +5730,28 @@ out:
return err;
}
+static void nv_restore_phy(struct net_device *dev)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ u16 phy_reserved, mii_control;
+
+ if (np->phy_oui == PHY_OUI_REALTEK &&
+ np->phy_model == PHY_MODEL_REALTEK_8201 &&
+ phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
+ mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3);
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
+ phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
+ phy_reserved |= PHY_REALTEK_INIT8;
+ mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved);
+ mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1);
+
+ /* restart auto negotiation */
+ mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
+ mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+ mii_rw(dev, np->phyaddr, MII_BMCR, mii_control);
+ }
+}
+
static void __devexit nv_remove(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
@@ -5493,6 +5768,9 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
base + NvRegTransmitPoll);
+ /* restore any phy related changes */
+ nv_restore_phy(dev);
+
/* free all structures */
free_rings(dev);
iounmap(get_hwbase(dev));
@@ -5632,83 +5910,83 @@ static struct pci_device_id pci_tbl[] = {
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_20),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_21),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_22),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_23),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_24),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_25),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_26),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_27),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_28),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_29),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_30),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_31),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{0,},
};
@@ -5744,6 +6022,8 @@ module_param(msix, int, 0);
MODULE_PARM_DESC(msix, "MSIX interrupts are enabled by setting to 1 and disabled by setting to 0.");
module_param(dma_64bit, int, 0);
MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
+module_param(phy_cross, int, 0);
+MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
MODULE_AUTHOR("Manfred Spraul <manfred@...orfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index c8c3df7..99a4b99 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -98,7 +98,6 @@
#include "gianfar_mii.h"
#define TX_TIMEOUT (1*HZ)
-#define SKB_ALLOC_TIMEOUT 1000000
#undef BRIEF_GFAR_ERRORS
#undef VERBOSE_GFAR_ERRORS
@@ -115,7 +114,9 @@ static int gfar_enet_open(struct net_device *dev);
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void gfar_timeout(struct net_device *dev);
static int gfar_close(struct net_device *dev);
-struct sk_buff *gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp);
+struct sk_buff *gfar_new_skb(struct net_device *dev);
+static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
+ struct sk_buff *skb);
static int gfar_set_mac_address(struct net_device *dev);
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
static irqreturn_t gfar_error(int irq, void *dev_id);
@@ -783,14 +784,21 @@ int startup_gfar(struct net_device *dev)
rxbdp = priv->rx_bd_base;
for (i = 0; i < priv->rx_ring_size; i++) {
- struct sk_buff *skb = NULL;
+ struct sk_buff *skb;
- rxbdp->status = 0;
+ skb = gfar_new_skb(dev);
- skb = gfar_new_skb(dev, rxbdp);
+ if (!skb) {
+ printk(KERN_ERR "%s: Can't allocate RX buffers\n",
+ dev->name);
+
+ goto err_rxalloc_fail;
+ }
priv->rx_skbuff[i] = skb;
+ gfar_new_rxbdp(dev, rxbdp, skb);
+
rxbdp++;
}
@@ -916,6 +924,7 @@ rx_irq_fail:
tx_irq_fail:
free_irq(priv->interruptError, dev);
err_irq_fail:
+err_rxalloc_fail:
rx_skb_fail:
free_skb_resources(priv);
tx_skb_fail:
@@ -1328,18 +1337,37 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id)
return IRQ_HANDLED;
}
-struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
+static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
+ struct sk_buff *skb)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ u32 * status_len = (u32 *)bdp;
+ u16 flags;
+
+ bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
+ priv->rx_buffer_size, DMA_FROM_DEVICE);
+
+ flags = RXBD_EMPTY | RXBD_INTERRUPT;
+
+ if (bdp == priv->rx_bd_base + priv->rx_ring_size - 1)
+ flags |= RXBD_WRAP;
+
+ eieio();
+
+ *status_len = (u32)flags << 16;
+}
+
+
+struct sk_buff * gfar_new_skb(struct net_device *dev)
{
unsigned int alignamount;
struct gfar_private *priv = netdev_priv(dev);
struct sk_buff *skb = NULL;
- unsigned int timeout = SKB_ALLOC_TIMEOUT;
/* We have to allocate the skb, so keep trying till we succeed */
- while ((!skb) && timeout--)
- skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT);
+ skb = netdev_alloc_skb(dev, priv->rx_buffer_size + RXBUF_ALIGNMENT);
- if (NULL == skb)
+ if (!skb)
return NULL;
alignamount = RXBUF_ALIGNMENT -
@@ -1350,15 +1378,6 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
*/
skb_reserve(skb, alignamount);
- bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
- priv->rx_buffer_size, DMA_FROM_DEVICE);
-
- bdp->length = 0;
-
- /* Mark the buffer empty */
- eieio();
- bdp->status |= (RXBD_EMPTY | RXBD_INTERRUPT);
-
return skb;
}
@@ -1544,10 +1563,31 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
bdp = priv->cur_rx;
while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
+ struct sk_buff *newskb;
rmb();
+
+ /* Add another skb for the future */
+ newskb = gfar_new_skb(dev);
+
skb = priv->rx_skbuff[priv->skb_currx];
- if ((bdp->status & RXBD_LAST) && !(bdp->status & RXBD_ERR)) {
+ /* We drop the frame if we failed to allocate a new buffer */
+ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
+ bdp->status & RXBD_ERR)) {
+ count_errors(bdp->status, dev);
+
+ if (unlikely(!newskb))
+ newskb = skb;
+
+ if (skb) {
+ dma_unmap_single(&priv->dev->dev,
+ bdp->bufPtr,
+ priv->rx_buffer_size,
+ DMA_FROM_DEVICE);
+
+ dev_kfree_skb_any(skb);
+ }
+ } else {
/* Increment the number of packets */
dev->stats.rx_packets++;
howmany++;
@@ -1558,23 +1598,14 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
gfar_process_frame(dev, skb, pkt_len);
dev->stats.rx_bytes += pkt_len;
- } else {
- count_errors(bdp->status, dev);
-
- if (skb)
- dev_kfree_skb_any(skb);
-
- priv->rx_skbuff[priv->skb_currx] = NULL;
}
dev->last_rx = jiffies;
- /* Clear the status flags for this buffer */
- bdp->status &= ~RXBD_STATS;
+ priv->rx_skbuff[priv->skb_currx] = newskb;
- /* Add another skb for the future */
- skb = gfar_new_skb(dev, bdp);
- priv->rx_skbuff[priv->skb_currx] = skb;
+ /* Setup the new bdp */
+ gfar_new_rxbdp(dev, bdp, newskb);
/* Update to the next pointer */
if (bdp->status & RXBD_WRAP)
@@ -1584,9 +1615,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
/* update to point at the next skb */
priv->skb_currx =
- (priv->skb_currx +
- 1) & RX_RING_MOD_MASK(priv->rx_ring_size);
-
+ (priv->skb_currx + 1) &
+ RX_RING_MOD_MASK(priv->rx_ring_size);
}
/* Update the current rxbd pointer to be the next one */
@@ -2001,12 +2031,16 @@ static irqreturn_t gfar_error(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:fsl-gianfar");
+
/* Structure for a device driver */
static struct platform_driver gfar_driver = {
.probe = gfar_probe,
.remove = gfar_remove,
.driver = {
.name = "fsl-gianfar",
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 378a239..5d2108c 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -43,6 +43,8 @@
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
#include "core.h"
@@ -127,10 +129,35 @@ static struct device_node *emac_boot_list[EMAC_BOOT_LIST_SIZE];
static inline void emac_report_timeout_error(struct emac_instance *dev,
const char *error)
{
- if (net_ratelimit())
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
+ EMAC_FTR_440EP_PHY_CLK_FIX))
+ DBG(dev, "%s" NL, error);
+ else if (net_ratelimit())
printk(KERN_ERR "%s: %s\n", dev->ndev->name, error);
}
+/* EMAC PHY clock workaround:
+ * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX,
+ * which allows controlling each EMAC clock
+ */
+static inline void emac_rx_clk_tx(struct emac_instance *dev)
+{
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR,
+ 0, SDR0_MFR_ECS >> dev->cell_index);
+#endif
+}
+
+static inline void emac_rx_clk_default(struct emac_instance *dev)
+{
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR,
+ SDR0_MFR_ECS >> dev->cell_index, 0);
+#endif
+}
+
/* PHY polling intervals */
#define PHY_POLL_LINK_ON HZ
#define PHY_POLL_LINK_OFF (HZ / 5)
@@ -524,7 +551,10 @@ static int emac_configure(struct emac_instance *dev)
rx_size = dev->rx_fifo_size_gige;
if (dev->ndev->mtu > ETH_DATA_LEN) {
- mr1 |= EMAC_MR1_JPSM;
+ if (emac_has_feature(dev, EMAC_FTR_EMAC4))
+ mr1 |= EMAC4_MR1_JPSM;
+ else
+ mr1 |= EMAC_MR1_JPSM;
dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO;
} else
dev->stop_timeout = STOP_TIMEOUT_1000;
@@ -708,7 +738,7 @@ static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg)
rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port);
/* Wait for management interface to become idle */
- n = 10;
+ n = 20;
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
udelay(1);
if (!--n) {
@@ -733,7 +763,7 @@ static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg)
out_be32(&p->stacr, r);
/* Wait for read to complete */
- n = 100;
+ n = 200;
while (!emac_phy_done(dev, (r = in_be32(&p->stacr)))) {
udelay(1);
if (!--n) {
@@ -780,7 +810,7 @@ static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg,
rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port);
/* Wait for management interface to be idle */
- n = 10;
+ n = 20;
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
udelay(1);
if (!--n) {
@@ -806,7 +836,7 @@ static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg,
out_be32(&p->stacr, r);
/* Wait for write to complete */
- n = 100;
+ n = 200;
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
udelay(1);
if (!--n) {
@@ -1094,9 +1124,11 @@ static int emac_open(struct net_device *ndev)
int link_poll_interval;
if (dev->phy.def->ops->poll_link(&dev->phy)) {
dev->phy.def->ops->read_link(&dev->phy);
+ emac_rx_clk_default(dev);
netif_carrier_on(dev->ndev);
link_poll_interval = PHY_POLL_LINK_ON;
} else {
+ emac_rx_clk_tx(dev);
netif_carrier_off(dev->ndev);
link_poll_interval = PHY_POLL_LINK_OFF;
}
@@ -1174,6 +1206,7 @@ static void emac_link_timer(struct work_struct *work)
if (dev->phy.def->ops->poll_link(&dev->phy)) {
if (!netif_carrier_ok(dev->ndev)) {
+ emac_rx_clk_default(dev);
/* Get new link parameters */
dev->phy.def->ops->read_link(&dev->phy);
@@ -1186,6 +1219,7 @@ static void emac_link_timer(struct work_struct *work)
link_poll_interval = PHY_POLL_LINK_ON;
} else {
if (netif_carrier_ok(dev->ndev)) {
+ emac_rx_clk_tx(dev);
netif_carrier_off(dev->ndev);
netif_tx_disable(dev->ndev);
emac_reinitialize(dev);
@@ -2237,7 +2271,7 @@ static int __devinit emac_of_bus_notify(struct notifier_block *nb,
return 0;
}
-static struct notifier_block emac_of_bus_notifier = {
+static struct notifier_block emac_of_bus_notifier __devinitdata = {
.notifier_call = emac_of_bus_notify
};
@@ -2330,6 +2364,19 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
dev->phy.mdio_read = emac_mdio_read;
dev->phy.mdio_write = emac_mdio_write;
+ /* Enable internal clock source */
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
+#endif
+ /* PHY clock workaround */
+ emac_rx_clk_tx(dev);
+
+ /* Enable internal clock source on 440GX*/
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
+#endif
/* Configure EMAC with defaults so we can at least use MDIO
* This is needed mostly for 440GX
*/
@@ -2362,6 +2409,12 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
if (!emac_mii_phy_probe(&dev->phy, i))
break;
}
+
+ /* Enable external clock source */
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR, SDR0_MFR_ECS, 0);
+#endif
mutex_unlock(&emac_phy_map_lock);
if (i == 0x20) {
printk(KERN_WARNING "%s: can't find PHY!\n", np->full_name);
@@ -2487,8 +2540,15 @@ static int __devinit emac_init_config(struct emac_instance *dev)
}
/* Check EMAC version */
- if (of_device_is_compatible(np, "ibm,emac4"))
+ if (of_device_is_compatible(np, "ibm,emac4")) {
dev->features |= EMAC_FTR_EMAC4;
+ if (of_device_is_compatible(np, "ibm,emac-440gx"))
+ dev->features |= EMAC_FTR_440GX_PHY_CLK_FIX;
+ } else {
+ if (of_device_is_compatible(np, "ibm,emac-440ep") ||
+ of_device_is_compatible(np, "ibm,emac-440gr"))
+ dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
+ }
/* Fixup some feature bits based on the device tree */
if (of_get_property(np, "has-inverted-stacr-oc", NULL))
@@ -2559,8 +2619,11 @@ static int __devinit emac_probe(struct of_device *ofdev,
struct device_node **blist = NULL;
int err, i;
- /* Skip unused/unwired EMACS */
- if (of_get_property(np, "unused", NULL))
+ /* Skip unused/unwired EMACS. We leave the check for an unused
+ * property here for now, but new flat device trees should set a
+ * status property to "disabled" instead.
+ */
+ if (of_get_property(np, "unused", NULL) || !of_device_is_available(np))
return -ENODEV;
/* Find ourselves in the bootlist if we are there */
diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h
index 4e74d82..1683db9 100644
--- a/drivers/net/ibm_newemac/core.h
+++ b/drivers/net/ibm_newemac/core.h
@@ -301,6 +301,14 @@ struct emac_instance {
* Set if we have new type STACR with STAOPC
*/
#define EMAC_FTR_HAS_NEW_STACR 0x00000040
+/*
+ * Set if we need phy clock workaround for 440gx
+ */
+#define EMAC_FTR_440GX_PHY_CLK_FIX 0x00000080
+/*
+ * Set if we need phy clock workaround for 440ep or 440gr
+ */
+#define EMAC_FTR_440EP_PHY_CLK_FIX 0x00000100
/* Right now, we don't quite handle the always/possible masks on the
@@ -312,8 +320,8 @@ enum {
EMAC_FTRS_POSSIBLE =
#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
- EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
- EMAC_FTR_STACR_OC_INVERT |
+ EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
+ EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_TAH
EMAC_FTR_HAS_TAH |
@@ -324,7 +332,7 @@ enum {
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
EMAC_FTR_HAS_RGMII |
#endif
- 0,
+ EMAC_FTR_440EP_PHY_CLK_FIX,
};
static inline int emac_has_feature(struct emac_instance *dev,
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index 6869f08..10c267b 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -61,8 +61,8 @@ int __devinit mal_register_commac(struct mal_instance *mal,
return 0;
}
-void __devexit mal_unregister_commac(struct mal_instance *mal,
- struct mal_commac *commac)
+void mal_unregister_commac(struct mal_instance *mal,
+ struct mal_commac *commac)
{
unsigned long flags;
@@ -136,6 +136,14 @@ void mal_enable_rx_channel(struct mal_instance *mal, int channel)
{
unsigned long flags;
+ /*
+ * On some 4xx PPC's (e.g. 460EX/GT), the rx channel is a multiple
+ * of 8, but enabling in MAL_RXCASR needs the divided by 8 value
+ * for the bitmask
+ */
+ if (!(channel % 8))
+ channel >>= 3;
+
spin_lock_irqsave(&mal->lock, flags);
MAL_DBG(mal, "enable_rx(%d)" NL, channel);
@@ -148,6 +156,14 @@ void mal_enable_rx_channel(struct mal_instance *mal, int channel)
void mal_disable_rx_channel(struct mal_instance *mal, int channel)
{
+ /*
+ * On some 4xx PPC's (e.g. 460EX/GT), the rx channel is a multiple
+ * of 8, but enabling in MAL_RXCASR needs the divided by 8 value
+ * for the bitmask
+ */
+ if (!(channel % 8))
+ channel >>= 3;
+
set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
MAL_DBG(mal, "disable_rx(%d)" NL, channel);
diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c
index 5757788..e32da3d 100644
--- a/drivers/net/ibm_newemac/rgmii.c
+++ b/drivers/net/ibm_newemac/rgmii.c
@@ -179,7 +179,7 @@ void rgmii_put_mdio(struct of_device *ofdev, int input)
mutex_unlock(&dev->lock);
}
-void __devexit rgmii_detach(struct of_device *ofdev, int input)
+void rgmii_detach(struct of_device *ofdev, int input)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct rgmii_regs __iomem *p = dev->base;
diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c
index b023d10..30173a9 100644
--- a/drivers/net/ibm_newemac/tah.c
+++ b/drivers/net/ibm_newemac/tah.c
@@ -35,7 +35,7 @@ int __devinit tah_attach(struct of_device *ofdev, int channel)
return 0;
}
-void __devexit tah_detach(struct of_device *ofdev, int channel)
+void tah_detach(struct of_device *ofdev, int channel)
{
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
diff --git a/drivers/net/ibm_newemac/zmii.c b/drivers/net/ibm_newemac/zmii.c
index 2ea472a..17b1541 100644
--- a/drivers/net/ibm_newemac/zmii.c
+++ b/drivers/net/ibm_newemac/zmii.c
@@ -189,7 +189,7 @@ void zmii_set_speed(struct of_device *ofdev, int input, int speed)
mutex_unlock(&dev->lock);
}
-void __devexit zmii_detach(struct of_device *ofdev, int input)
+void zmii_detach(struct of_device *ofdev, int input)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index aaee02e..ae398f0 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -871,6 +871,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
goto err_pci_reg;
pci_set_master(pdev);
+ pci_save_state(pdev);
err = -ENOMEM;
netdev = alloc_etherdev(sizeof(struct igb_adapter));
@@ -4079,6 +4080,7 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
+ pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 9f58452..083b0dd 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -60,6 +60,7 @@ static struct platform_driver ali_ircc_driver = {
.resume = ali_ircc_resume,
.driver = {
.name = ALI_IRCC_DRIVER_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -2256,6 +2257,7 @@ static void FIR2SIR(int iobase)
MODULE_AUTHOR("Benjamin Kong <benjamin_kong@....com.tw>");
MODULE_DESCRIPTION("ALi FIR Controller Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME);
module_param_array(io, int, NULL, 0);
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 8c09344..60b94bb 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -897,6 +897,7 @@ static int pxa_irda_remove(struct platform_device *_dev)
static struct platform_driver pxa_ir_driver = {
.driver = {
.name = "pxa2xx-ir",
+ .owner = THIS_MODULE,
},
.probe = pxa_irda_probe,
.remove = pxa_irda_remove,
@@ -918,3 +919,4 @@ module_init(pxa_irda_init);
module_exit(pxa_irda_exit);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-ir");
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 056639f..1bc8518 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -1008,6 +1008,7 @@ static struct platform_driver sa1100ir_driver = {
.resume = sa1100_irda_resume,
.driver = {
.name = "sa11x0-ir",
+ .owner = THIS_MODULE,
},
};
@@ -1041,3 +1042,4 @@ MODULE_LICENSE("GPL");
MODULE_PARM_DESC(power_level, "IrDA power level, 1 (low) to 3 (high)");
MODULE_PARM_DESC(tx_lpm, "Enable transmitter low power (1.6us) mode");
MODULE_PARM_DESC(max_rate, "Maximum baud rate (4000000, 115200, 57600, 38400, 19200, 9600)");
+MODULE_ALIAS("platform:sa11x0-ir");
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index cb371a8..7b85922 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3431,6 +3431,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
}
pci_set_master(pdev);
+ pci_save_state(pdev);
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES);
@@ -3721,6 +3722,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
+ pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 5c154fe..0794482 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -249,6 +249,7 @@ out:
MODULE_DESCRIPTION("Jazz SONIC ethernet driver");
module_param(sonic_debug, int, 0);
MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)");
+MODULE_ALIAS("platform:jazzsonic");
#include "sonic.c"
@@ -271,6 +272,7 @@ static struct platform_driver jazz_sonic_driver = {
.remove = __devexit_p(jazz_sonic_device_remove),
.driver = {
.name = jazz_sonic_string,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 1d24a73..e185763 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -883,7 +883,7 @@ static int korina_init(struct net_device *dev)
static int korina_restart(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
- int ret = 0;
+ int ret;
/*
* Disable interrupts
@@ -987,7 +987,7 @@ static void korina_poll_controller(struct net_device *dev)
static int korina_open(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
- int ret = 0;
+ int ret;
/* Initialize */
ret = korina_init(dev);
@@ -1031,6 +1031,8 @@ static int korina_open(struct net_device *dev)
dev->name, lp->und_irq);
goto err_free_ovr_irq;
}
+out:
+ return ret;
err_free_ovr_irq:
free_irq(lp->ovr_irq, dev);
@@ -1041,8 +1043,6 @@ err_free_rx_irq:
err_release:
korina_free_ring(dev);
goto out;
-out:
- return ret;
}
static int korina_close(struct net_device *dev)
@@ -1082,7 +1082,7 @@ static int korina_probe(struct platform_device *pdev)
struct korina_private *lp;
struct net_device *dev;
struct resource *r;
- int retval, err;
+ int rc;
dev = alloc_etherdev(sizeof(struct korina_private));
if (!dev) {
@@ -1106,7 +1106,7 @@ static int korina_probe(struct platform_device *pdev)
lp->eth_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->eth_regs) {
printk(KERN_ERR DRV_NAME "cannot remap registers\n");
- retval = -ENXIO;
+ rc = -ENXIO;
goto probe_err_out;
}
@@ -1114,7 +1114,7 @@ static int korina_probe(struct platform_device *pdev)
lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->rx_dma_regs) {
printk(KERN_ERR DRV_NAME "cannot remap Rx DMA registers\n");
- retval = -ENXIO;
+ rc = -ENXIO;
goto probe_err_dma_rx;
}
@@ -1122,14 +1122,14 @@ static int korina_probe(struct platform_device *pdev)
lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->tx_dma_regs) {
printk(KERN_ERR DRV_NAME "cannot remap Tx DMA registers\n");
- retval = -ENXIO;
+ rc = -ENXIO;
goto probe_err_dma_tx;
}
lp->td_ring = kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL);
if (!lp->td_ring) {
printk(KERN_ERR DRV_NAME "cannot allocate descriptors\n");
- retval = -ENOMEM;
+ rc = -ENXIO;
goto probe_err_td_ring;
}
@@ -1166,14 +1166,14 @@ static int korina_probe(struct platform_device *pdev)
lp->mii_if.phy_id_mask = 0x1f;
lp->mii_if.reg_num_mask = 0x1f;
- err = register_netdev(dev);
- if (err) {
+ rc = register_netdev(dev);
+ if (rc < 0) {
printk(KERN_ERR DRV_NAME
- ": cannot register net device %d\n", err);
- retval = -EINVAL;
+ ": cannot register net device %d\n", rc);
goto probe_err_register;
}
- return 0;
+out:
+ return rc;
probe_err_register:
kfree(lp->td_ring);
@@ -1185,7 +1185,7 @@ probe_err_dma_rx:
iounmap(lp->eth_regs);
probe_err_out:
free_netdev(dev);
- return retval;
+ goto out;
}
static int korina_remove(struct platform_device *pdev)
@@ -1193,12 +1193,9 @@ static int korina_remove(struct platform_device *pdev)
struct korina_device *bif = platform_get_drvdata(pdev);
struct korina_private *lp = netdev_priv(bif->dev);
- if (lp->eth_regs)
- iounmap(lp->eth_regs);
- if (lp->rx_dma_regs)
- iounmap(lp->rx_dma_regs);
- if (lp->tx_dma_regs)
- iounmap(lp->tx_dma_regs);
+ iounmap(lp->eth_regs);
+ iounmap(lp->rx_dma_regs);
+ iounmap(lp->tx_dma_regs);
platform_set_drvdata(pdev, NULL);
unregister_netdev(bif->dev);
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index d513bb8..92dccd4 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -1281,6 +1281,7 @@ static struct platform_driver macb_driver = {
.remove = __exit_p(macb_remove),
.driver = {
.name = "macb",
+ .owner = THIS_MODULE,
},
};
@@ -1300,3 +1301,4 @@ module_exit(macb_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@...el.com>");
+MODULE_ALIAS("platform:macb");
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index cdaa8fc..0b32648 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -830,6 +830,7 @@ static struct platform_driver meth_driver = {
.remove = __devexit_p(meth_remove),
.driver = {
.name = "meth",
+ .owner = THIS_MODULE,
}
};
@@ -855,3 +856,4 @@ module_exit(meth_exit_module);
MODULE_AUTHOR("Ilya Volynets <ilya@...Ilya.com>");
MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:meth");
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 601ffd6..381b36e 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -2030,6 +2030,7 @@ static struct platform_driver mv643xx_eth_driver = {
.shutdown = mv643xx_eth_shutdown,
.driver = {
.name = MV643XX_ETH_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -2038,6 +2039,7 @@ static struct platform_driver mv643xx_eth_shared_driver = {
.remove = mv643xx_eth_shared_remove,
.driver = {
.name = MV643XX_ETH_SHARED_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -2085,7 +2087,8 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR( "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
" and Dale Farnsworth");
MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
-MODULE_ALIAS("platform:mv643xx_eth");
+MODULE_ALIAS("platform:" MV643XX_ETH_NAME);
+MODULE_ALIAS("platform:" MV643XX_ETH_SHARED_NAME);
/*
* The second part is the low level driver of the gigE ethernet ports.
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index 78d34af..dc442e3 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -502,4 +502,4 @@ module_exit(netx_eth_cleanup);
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:" CARDNAME);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 05748ca..af73564 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1132,8 +1132,8 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
u32 fw_minor = 0;
u32 fw_build = 0;
char brd_name[NETXEN_MAX_SHORT_NAME];
- struct netxen_new_user_info user_info;
- int i, addr = NETXEN_USER_START;
+ char serial_num[32];
+ int i, addr;
__le32 *ptr32;
struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
@@ -1150,10 +1150,10 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
valid = 0;
}
if (valid) {
- ptr32 = (u32 *) & user_info;
- for (i = 0;
- i < sizeof(struct netxen_new_user_info) / sizeof(u32);
- i++) {
+ ptr32 = (u32 *)&serial_num;
+ addr = NETXEN_USER_START +
+ offsetof(struct netxen_new_user_info, serial_num);
+ for (i = 0; i < 8; i++) {
if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
printk("%s: ERROR reading %s board userarea.\n",
netxen_nic_driver_name,
@@ -1163,10 +1163,11 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
ptr32++;
addr += sizeof(u32);
}
+
get_brd_name_by_type(board_info->board_type, brd_name);
printk("NetXen %s Board S/N %s Chip id 0x%x\n",
- brd_name, user_info.serial_num, board_info->chip_id);
+ brd_name, serial_num, board_info->chip_id);
printk("NetXen %s Board #%d, Chip id 0x%x\n",
board_info->board_type == 0x0b ? "XGB" : "GBE",
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 963630c..94e0b7e 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -89,6 +89,9 @@ int mdiobus_register(struct mii_bus *bus)
phydev->bus = bus;
+ /* Run all of the fixups for this PHY */
+ phy_scan_fixups(phydev);
+
err = device_register(&phydev->dev);
if (err) {
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 12fccb1..3c18bb5 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -406,8 +406,10 @@ int phy_mii_ioctl(struct phy_device *phydev,
if (mii_data->reg_num == MII_BMCR
&& val & BMCR_RESET
- && phydev->drv->config_init)
+ && phydev->drv->config_init) {
+ phy_scan_fixups(phydev);
phydev->drv->config_init(phydev);
+ }
break;
default:
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8b1121b..ddf8d51 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -53,6 +53,96 @@ static void phy_device_release(struct device *dev)
phy_device_free(to_phy_device(dev));
}
+static LIST_HEAD(phy_fixup_list);
+static DEFINE_MUTEX(phy_fixup_lock);
+
+/*
+ * Creates a new phy_fixup and adds it to the list
+ * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
+ * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
+ * It can also be PHY_ANY_UID
+ * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
+ * comparison
+ * @run: The actual code to be run when a matching PHY is found
+ */
+int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *))
+{
+ struct phy_fixup *fixup;
+
+ fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL);
+ if (!fixup)
+ return -ENOMEM;
+
+ strncpy(fixup->bus_id, bus_id, BUS_ID_SIZE);
+ fixup->phy_uid = phy_uid;
+ fixup->phy_uid_mask = phy_uid_mask;
+ fixup->run = run;
+
+ mutex_lock(&phy_fixup_lock);
+ list_add_tail(&fixup->list, &phy_fixup_list);
+ mutex_unlock(&phy_fixup_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_register_fixup);
+
+/* Registers a fixup to be run on any PHY with the UID in phy_uid */
+int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *))
+{
+ return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
+}
+EXPORT_SYMBOL(phy_register_fixup_for_uid);
+
+/* Registers a fixup to be run on the PHY with id string bus_id */
+int phy_register_fixup_for_id(const char *bus_id,
+ int (*run)(struct phy_device *))
+{
+ return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
+}
+EXPORT_SYMBOL(phy_register_fixup_for_id);
+
+/*
+ * Returns 1 if fixup matches phydev in bus_id and phy_uid.
+ * Fixups can be set to match any in one or more fields.
+ */
+static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
+{
+ if (strcmp(fixup->bus_id, phydev->dev.bus_id) != 0)
+ if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
+ return 0;
+
+ if ((fixup->phy_uid & fixup->phy_uid_mask) !=
+ (phydev->phy_id & fixup->phy_uid_mask))
+ if (fixup->phy_uid != PHY_ANY_UID)
+ return 0;
+
+ return 1;
+}
+
+/* Runs any matching fixups for this phydev */
+int phy_scan_fixups(struct phy_device *phydev)
+{
+ struct phy_fixup *fixup;
+
+ mutex_lock(&phy_fixup_lock);
+ list_for_each_entry(fixup, &phy_fixup_list, list) {
+ if (phy_needs_fixup(phydev, fixup)) {
+ int err;
+
+ err = fixup->run(phydev);
+
+ if (err < 0)
+ return err;
+ }
+ }
+ mutex_unlock(&phy_fixup_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_scan_fixups);
+
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
{
struct phy_device *dev;
@@ -179,13 +269,13 @@ void phy_prepare_link(struct phy_device *phydev,
* choose to call only the subset of functions which provide
* the desired functionality.
*/
-struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
+struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
void (*handler)(struct net_device *), u32 flags,
phy_interface_t interface)
{
struct phy_device *phydev;
- phydev = phy_attach(dev, phy_id, flags, interface);
+ phydev = phy_attach(dev, bus_id, flags, interface);
if (IS_ERR(phydev))
return phydev;
@@ -226,7 +316,7 @@ static int phy_compare_id(struct device *dev, void *data)
/**
* phy_attach - attach a network device to a particular PHY device
* @dev: network device to attach
- * @phy_id: PHY device to attach
+ * @bus_id: PHY device to attach
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*
@@ -238,7 +328,7 @@ static int phy_compare_id(struct device *dev, void *data)
* change. The phy_device is returned to the attaching driver.
*/
struct phy_device *phy_attach(struct net_device *dev,
- const char *phy_id, u32 flags, phy_interface_t interface)
+ const char *bus_id, u32 flags, phy_interface_t interface)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
@@ -246,12 +336,12 @@ struct phy_device *phy_attach(struct net_device *dev,
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name */
- d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
+ d = bus_find_device(bus, NULL, (void *)bus_id, phy_compare_id);
if (d) {
phydev = to_phy_device(d);
} else {
- printk(KERN_ERR "%s not found\n", phy_id);
+ printk(KERN_ERR "%s not found\n", bus_id);
return ERR_PTR(-ENODEV);
}
@@ -271,7 +361,7 @@ struct phy_device *phy_attach(struct net_device *dev,
if (phydev->attached_dev) {
printk(KERN_ERR "%s: %s already attached\n",
- dev->name, phy_id);
+ dev->name, bus_id);
return ERR_PTR(-EBUSY);
}
@@ -287,6 +377,11 @@ struct phy_device *phy_attach(struct net_device *dev,
if (phydev->drv->config_init) {
int err;
+ err = phy_scan_fixups(phydev);
+
+ if (err < 0)
+ return ERR_PTR(err);
+
err = phydev->drv->config_init(phydev);
if (err < 0)
@@ -395,6 +490,7 @@ EXPORT_SYMBOL(genphy_config_advert);
*/
int genphy_setup_forced(struct phy_device *phydev)
{
+ int err;
int ctl = 0;
phydev->pause = phydev->asym_pause = 0;
@@ -407,17 +503,26 @@ int genphy_setup_forced(struct phy_device *phydev)
if (DUPLEX_FULL == phydev->duplex)
ctl |= BMCR_FULLDPLX;
- ctl = phy_write(phydev, MII_BMCR, ctl);
+ err = phy_write(phydev, MII_BMCR, ctl);
- if (ctl < 0)
- return ctl;
+ if (err < 0)
+ return err;
+
+ /*
+ * Run the fixups on this PHY, just in case the
+ * board code needs to change something after a reset
+ */
+ err = phy_scan_fixups(phydev);
+
+ if (err < 0)
+ return err;
/* We just reset the device, so we'd better configure any
* settings the PHY requires to operate */
if (phydev->drv->config_init)
- ctl = phydev->drv->config_init(phydev);
+ err = phydev->drv->config_init(phydev);
- return ctl;
+ return err;
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index dcbe01b..157fd93 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -86,7 +86,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.20"
+#define DRV_VERSION "2.0.26.22"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@@ -117,20 +117,6 @@ static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
-#define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
-#define PANIC 1
-#define LOW 2
-static inline int rx_buffer_level(struct s2io_nic * sp, int rxb_size, int ring)
-{
- struct mac_info *mac_control;
-
- mac_control = &sp->mac_control;
- if (rxb_size <= rxd_count[sp->rxd_mode])
- return PANIC;
- else if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16)
- return LOW;
- return 0;
-}
static inline int is_s2io_card_up(const struct s2io_nic * sp)
{
@@ -2458,7 +2444,7 @@ static void free_tx_buffers(struct s2io_nic *nic)
for (i = 0; i < config->tx_fifo_num; i++) {
unsigned long flags;
spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags);
- for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
+ for (j = 0; j < config->tx_cfg[i].fifo_len; j++) {
txdp = (struct TxD *) \
mac_control->fifos[i].list_info[j].list_virt_addr;
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
@@ -2544,7 +2530,6 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
struct config_param *config;
u64 tmp;
struct buffAdd *ba;
- unsigned long flags;
struct RxD_t *first_rxdp = NULL;
u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
struct RxD1 *rxdp1;
@@ -2592,15 +2577,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
dev->name, rxdp);
}
- if(!napi) {
- spin_lock_irqsave(&nic->put_lock, flags);
- mac_control->rings[ring_no].put_pos =
- (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
- spin_unlock_irqrestore(&nic->put_lock, flags);
- } else {
- mac_control->rings[ring_no].put_pos =
- (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
- }
+
if ((rxdp->Control_1 & RXD_OWN_XENA) &&
((nic->rxd_mode == RXD_MODE_3B) &&
(rxdp->Control_2 & s2BIT(0)))) {
@@ -2978,7 +2955,7 @@ static void rx_intr_handler(struct ring_info *ring_data)
{
struct s2io_nic *nic = ring_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
- int get_block, put_block, put_offset;
+ int get_block, put_block;
struct rx_curr_get_info get_info, put_info;
struct RxD_t *rxdp;
struct sk_buff *skb;
@@ -2987,19 +2964,11 @@ static void rx_intr_handler(struct ring_info *ring_data)
struct RxD1* rxdp1;
struct RxD3* rxdp3;
- spin_lock(&nic->rx_lock);
-
get_info = ring_data->rx_curr_get_info;
get_block = get_info.block_index;
memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
put_block = put_info.block_index;
rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
- if (!napi) {
- spin_lock(&nic->put_lock);
- put_offset = ring_data->put_pos;
- spin_unlock(&nic->put_lock);
- } else
- put_offset = ring_data->put_pos;
while (RXD_IS_UP2DT(rxdp)) {
/*
@@ -3016,7 +2985,6 @@ static void rx_intr_handler(struct ring_info *ring_data)
DBG_PRINT(ERR_DBG, "%s: The skb is ",
dev->name);
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- spin_unlock(&nic->rx_lock);
return;
}
if (nic->rxd_mode == RXD_MODE_1) {
@@ -3072,8 +3040,6 @@ static void rx_intr_handler(struct ring_info *ring_data)
}
}
}
-
- spin_unlock(&nic->rx_lock);
}
/**
@@ -4105,7 +4071,6 @@ static int s2io_close(struct net_device *dev)
do_s2io_delete_unicast_mc(sp, tmp64);
}
- /* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
return 0;
@@ -4370,29 +4335,9 @@ s2io_alarm_handle(unsigned long data)
static int s2io_chk_rx_buffers(struct s2io_nic *sp, int rng_n)
{
- int rxb_size, level;
-
- if (!sp->lro) {
- rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
- level = rx_buffer_level(sp, rxb_size, rng_n);
-
- if ((level == PANIC) && (!TASKLET_IN_USE)) {
- int ret;
- DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
- DBG_PRINT(INTR_DBG, "PANIC levels\n");
- if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "Out of memory in %s",
- __FUNCTION__);
- clear_bit(0, (&sp->tasklet_status));
- return -1;
- }
- clear_bit(0, (&sp->tasklet_status));
- } else if (level == LOW)
- tasklet_schedule(&sp->task);
-
- } else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+ if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
}
return 0;
}
@@ -6770,49 +6715,6 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
}
/**
- * s2io_tasklet - Bottom half of the ISR.
- * @dev_adr : address of the device structure in dma_addr_t format.
- * Description:
- * This is the tasklet or the bottom half of the ISR. This is
- * an extension of the ISR which is scheduled by the scheduler to be run
- * when the load on the CPU is low. All low priority tasks of the ISR can
- * be pushed into the tasklet. For now the tasklet is used only to
- * replenish the Rx buffers in the Rx buffer descriptors.
- * Return value:
- * void.
- */
-
-static void s2io_tasklet(unsigned long dev_addr)
-{
- struct net_device *dev = (struct net_device *) dev_addr;
- struct s2io_nic *sp = dev->priv;
- int i, ret;
- struct mac_info *mac_control;
- struct config_param *config;
-
- mac_control = &sp->mac_control;
- config = &sp->config;
-
- if (!TASKLET_IN_USE) {
- for (i = 0; i < config->rx_ring_num; i++) {
- ret = fill_rx_buffers(sp, i);
- if (ret == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s: Out of ",
- dev->name);
- DBG_PRINT(INFO_DBG, "memory in tasklet\n");
- break;
- } else if (ret == -EFILL) {
- DBG_PRINT(INFO_DBG,
- "%s: Rx Ring %d is full\n",
- dev->name, i);
- break;
- }
- }
- clear_bit(0, (&sp->tasklet_status));
- }
-}
-
-/**
* s2io_set_link - Set the LInk status
* @data: long pointer to device private structue
* Description: Sets the link status for the adapter
@@ -7161,7 +7063,6 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
{
int cnt = 0;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
- unsigned long flags;
register u64 val64 = 0;
struct config_param *config;
config = &sp->config;
@@ -7186,9 +7087,6 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
s2io_rem_isr(sp);
- /* Kill tasklet. */
- tasklet_kill(&sp->task);
-
/* Check if the device is Quiescent and then Reset the NIC */
while(do_io) {
/* As per the HW requirement we need to replenish the
@@ -7223,9 +7121,7 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
free_tx_buffers(sp);
/* Free all Rx buffers */
- spin_lock_irqsave(&sp->rx_lock, flags);
free_rx_buffers(sp);
- spin_unlock_irqrestore(&sp->rx_lock, flags);
clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
}
@@ -7314,9 +7210,6 @@ static int s2io_card_up(struct s2io_nic * sp)
S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
- /* Enable tasklet for the device */
- tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
-
/* Enable select interrupts */
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
if (sp->config.intr_type != INTA)
@@ -8119,20 +8012,15 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
s2io_reset(sp);
/*
- * Initialize the tasklet status and link state flags
+ * Initialize link state flags
* and the card state parameter
*/
- sp->tasklet_status = 0;
sp->state = 0;
/* Initialize spinlocks */
for (i = 0; i < sp->config.tx_fifo_num; i++)
spin_lock_init(&mac_control->fifos[i].tx_lock);
- if (!napi)
- spin_lock_init(&sp->put_lock);
- spin_lock_init(&sp->rx_lock);
-
/*
* SXE-002: Configure link and activity LED to init state
* on driver load.
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index e68fdf7..ce53a02 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -703,9 +703,6 @@ struct ring_info {
*/
struct rx_curr_get_info rx_curr_get_info;
- /* Index to the absolute position of the put pointer of Rx ring */
- int put_pos;
-
/* Buffer Address store. */
struct buffAdd **ba;
struct s2io_nic *nic;
@@ -868,8 +865,6 @@ struct s2io_nic {
int device_enabled_once;
char name[60];
- struct tasklet_struct task;
- volatile unsigned long tasklet_status;
/* Timer that handles I/O errors/exceptions */
struct timer_list alarm_timer;
@@ -879,8 +874,6 @@ struct s2io_nic {
atomic_t rx_bufs_left[MAX_RX_RINGS];
- spinlock_t put_lock;
-
#define PROMISC 1
#define ALL_MULTI 2
@@ -964,7 +957,6 @@ struct s2io_nic {
u8 lro;
u16 lro_max_aggr_per_sess;
volatile unsigned long state;
- spinlock_t rx_lock;
u64 general_int_mask;
#define VPD_STRING_LEN 80
u8 product_name[VPD_STRING_LEN];
@@ -1094,7 +1086,6 @@ static void s2io_handle_errors(void * dev_id);
static int s2io_starter(void);
static void s2io_closer(void);
static void s2io_tx_watchdog(struct net_device *dev);
-static void s2io_tasklet(unsigned long dev_addr);
static void s2io_set_multicast(struct net_device *dev);
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
static void s2io_link(struct s2io_nic * sp, int link);
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 78994ed..6261201 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -825,7 +825,8 @@ static struct platform_driver sgiseeq_driver = {
.probe = sgiseeq_probe,
.remove = __devexit_p(sgiseeq_remove),
.driver = {
- .name = "sgiseeq"
+ .name = "sgiseeq",
+ .owner = THIS_MODULE,
}
};
@@ -850,3 +851,4 @@ module_exit(sgiseeq_module_exit);
MODULE_DESCRIPTION("SGI Seeq 8003 driver");
MODULE_AUTHOR("Linux/MIPS Mailing List <linux-mips@...ux-mips.org>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sgiseeq");
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 76cc1d3..4e28002 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -92,6 +92,7 @@ module_param(tx_fifo_kb, int, 0400);
MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:smc911x");
/*
* The internal workings of the driver. If you are changing anything
@@ -243,7 +244,7 @@ static void smc911x_reset(struct net_device *dev)
do {
udelay(10);
reg = SMC_GET_PMT_CTRL() & PMT_CTRL_READY_;
- } while ( timeout-- && !reg);
+ } while (--timeout && !reg);
if (timeout == 0) {
PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
return;
@@ -267,7 +268,7 @@ static void smc911x_reset(struct net_device *dev)
resets++;
break;
}
- } while ( timeout-- && (reg & HW_CFG_SRST_));
+ } while (--timeout && (reg & HW_CFG_SRST_));
}
if (timeout == 0) {
PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
@@ -413,7 +414,7 @@ static inline void smc911x_drop_pkt(struct net_device *dev)
do {
udelay(10);
reg = SMC_GET_RX_DP_CTRL() & RX_DP_CTRL_FFWD_BUSY_;
- } while ( timeout-- && reg);
+ } while (--timeout && reg);
if (timeout == 0) {
PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
}
@@ -2262,6 +2263,7 @@ static struct platform_driver smc911x_driver = {
.resume = smc911x_drv_resume,
.driver = {
.name = CARDNAME,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 600b92a..a188e33 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -132,6 +132,7 @@ module_param(watchdog, int, 0400);
MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:smc91x");
/*
* The internal workings of the driver. If you are changing anything
@@ -2308,6 +2309,7 @@ static struct platform_driver smc_driver = {
.resume = smc_drv_resume,
.driver = {
.name = CARDNAME,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/net/sni_82596.c b/drivers/net/sni_82596.c
index 2cf6794..854ccf2 100644
--- a/drivers/net/sni_82596.c
+++ b/drivers/net/sni_82596.c
@@ -44,6 +44,7 @@ static const char sni_82596_string[] = "snirm_82596";
MODULE_AUTHOR("Thomas Bogendoerfer");
MODULE_DESCRIPTION("i82596 driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:snirm_82596");
module_param(i596_debug, int, 0);
MODULE_PARM_DESC(i596_debug, "82596 debug mask");
@@ -166,6 +167,7 @@ static struct platform_driver sni_82596_driver = {
.remove = __devexit_p(sni_82596_driver_remove),
.driver = {
.name = sni_82596_string,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 17585e5..e83b166 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -625,6 +625,12 @@ static void __init bdx_firmware_endianess(void)
s_firmLoad[i] = CPU_CHIP_SWAP32(s_firmLoad[i]);
}
+static int bdx_range_check(struct bdx_priv *priv, u32 offset)
+{
+ return (offset > (u32) (BDX_REGS_SIZE / priv->nic->port_num)) ?
+ -EINVAL : 0;
+}
+
static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
{
struct bdx_priv *priv = ndev->priv;
@@ -643,9 +649,15 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
}
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
switch (data[0]) {
case BDX_OP_READ:
+ error = bdx_range_check(priv, data[1]);
+ if (error < 0)
+ return error;
data[2] = READ_REG(priv, data[1]);
DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2],
data[2]);
@@ -655,6 +667,9 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
break;
case BDX_OP_WRITE:
+ error = bdx_range_check(priv, data[1]);
+ if (error < 0)
+ return error;
WRITE_REG(priv, data[1], data[2]);
DBG("write_reg(0x%x, 0x%x)\n", data[1], data[2]);
break;
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 6f33f84..6017d52 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -162,6 +162,7 @@ static struct platform_driver tsi_eth_driver = {
.remove = tsi108_ether_remove,
.driver = {
.name = "tsi-ethernet",
+ .owner = THIS_MODULE,
},
};
@@ -1729,3 +1730,4 @@ module_exit(tsi108_ether_exit);
MODULE_AUTHOR("Tundra Semiconductor Corporation");
MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tsi-ethernet");
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 333961b..c0dd25b 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -2183,7 +2183,6 @@ typhoon_resume(struct pci_dev *pdev)
}
netif_device_attach(dev);
- netif_start_queue(dev);
return 0;
reset:
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 29a4d65..0aac91c 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3926,7 +3926,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
fixed_link = of_get_property(np, "fixed-link", NULL);
if (fixed_link) {
- ug_info->mdio_bus = 0;
+ snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
ug_info->phy_address = fixed_link[0];
phy = NULL;
} else {
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index ed1afaf..6b8d882 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -605,7 +605,6 @@ static void __devinit velocity_get_options(struct velocity_opt *opts, int index,
static void velocity_init_cam_filter(struct velocity_info *vptr)
{
struct mac_regs __iomem * regs = vptr->mac_regs;
- unsigned short vid;
/* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG);
@@ -617,29 +616,33 @@ static void velocity_init_cam_filter(struct velocity_info *vptr)
mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
mac_set_cam_mask(regs, vptr->mCAMmask);
- /* Enable first VCAM */
+ /* Enable VCAMs */
if (vptr->vlgrp) {
- for (vid = 0; vid < VLAN_VID_MASK; vid++) {
- if (vlan_group_get_device(vptr->vlgrp, vid)) {
- /* If Tagging option is enabled and
- VLAN ID is not zero, then
- turn on MCFG_RTGOPT also */
- if (vid != 0)
- WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
+ unsigned int vid, i = 0;
+
+ if (!vlan_group_get_device(vptr->vlgrp, 0))
+ WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
- mac_set_vlan_cam(regs, 0, (u8 *) &vid);
+ for (vid = 1; (vid < VLAN_VID_MASK); vid++) {
+ if (vlan_group_get_device(vptr->vlgrp, vid)) {
+ mac_set_vlan_cam(regs, i, (u8 *) &vid);
+ vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
+ if (++i >= VCAM_SIZE)
+ break;
}
}
- vptr->vCAMmask[0] |= 1;
mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
- } else {
- u16 temp = 0;
- mac_set_vlan_cam(regs, 0, (u8 *) &temp);
- temp = 1;
- mac_set_vlan_cam_mask(regs, (u8 *) &temp);
}
}
+static void velocity_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ vptr->vlgrp = grp;
+}
+
static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -959,11 +962,13 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
dev->vlan_rx_add_vid = velocity_vlan_rx_add_vid;
dev->vlan_rx_kill_vid = velocity_vlan_rx_kill_vid;
+ dev->vlan_rx_register = velocity_vlan_rx_register;
#ifdef VELOCITY_ZERO_COPY_SUPPORT
dev->features |= NETIF_F_SG;
#endif
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER;
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
+ NETIF_F_HW_VLAN_RX;
if (vptr->flags & VELOCITY_FLAGS_TX_CSUM)
dev->features |= NETIF_F_IP_CSUM;
@@ -1597,8 +1602,13 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
skb_put(skb, pkt_len - 4);
skb->protocol = eth_type_trans(skb, vptr->dev);
+ if (vptr->vlgrp && (rd->rdesc0.RSR & RSR_DETAG)) {
+ vlan_hwaccel_rx(skb, vptr->vlgrp,
+ swab16(le16_to_cpu(rd->rdesc1.PQTAG)));
+ } else
+ netif_rx(skb);
+
stats->rx_bytes += pkt_len;
- netif_rx(skb);
return 0;
}
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index c4c8eab..c2cc42f 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -402,7 +402,7 @@ static int __init c101_init(void)
#ifdef MODULE
printk(KERN_INFO "c101: no card initialized\n");
#endif
- return -ENOSYS; /* no parameters specified, abort */
+ return -EINVAL; /* no parameters specified, abort */
}
printk(KERN_INFO "%s\n", version);
@@ -420,11 +420,11 @@ static int __init c101_init(void)
c101_run(irq, ram);
if (*hw == '\x0')
- return first_card ? 0 : -ENOSYS;
+ return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
printk(KERN_ERR "c101: invalid hardware parameters\n");
- return first_card ? 0 : -ENOSYS;
+ return first_card ? 0 : -EINVAL;
}
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index c4ab032..520bb0b 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1090,10 +1090,6 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
pvc_device *pvc = NULL;
struct net_device *dev;
int result, used;
- char * prefix = "pvc%d";
-
- if (type == ARPHRD_ETHER)
- prefix = "pvceth%d";
if ((pvc = add_pvc(frad, dlci)) == NULL) {
printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n",
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 779cbcd..02df20f 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -379,6 +379,18 @@ struct phy_driver {
};
#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
+#define PHY_ANY_ID "MATCH ANY PHY"
+#define PHY_ANY_UID 0xffffffff
+
+/* A Structure for boards to register fixups with the PHY Lib */
+struct phy_fixup {
+ struct list_head list;
+ char bus_id[BUS_ID_SIZE];
+ u32 phy_uid;
+ u32 phy_uid_mask;
+ int (*run)(struct phy_device *phydev);
+};
+
int phy_read(struct phy_device *phydev, u16 regnum);
int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
@@ -386,8 +398,8 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
struct phy_device * phy_attach(struct net_device *dev,
- const char *phy_id, u32 flags, phy_interface_t interface);
-struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
+ const char *bus_id, u32 flags, phy_interface_t interface);
+struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
void (*handler)(struct net_device *), u32 flags,
phy_interface_t interface);
void phy_disconnect(struct phy_device *phydev);
@@ -427,5 +439,13 @@ void phy_print_status(struct phy_device *phydev);
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
void phy_device_free(struct phy_device *phydev);
+int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *));
+int phy_register_fixup_for_id(const char *bus_id,
+ int (*run)(struct phy_device *));
+int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *));
+int phy_scan_fixups(struct phy_device *phydev);
+
extern struct bus_type mdio_bus_type;
#endif /* __PHY_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists