2.6.25-stable review patch. If anyone has any objections, please let us know. ------------------ From: Matt Carlson [ Upstream commit: 41588ba1ae166eaba0a70abf2d7ff064ad9331d3 ] Herbert Xu's commit fb93134dfc2a6e6fbedc7c270a31da03fce88db9, entitled "[TCP]: Fix size calculation in sk_stream_alloc_pskb", has triggered a bug in the 5701 where the 5701 DMA engine will corrupt outgoing packets. This problem only happens when the starting address of the packet matches a certain range of offsets and only when the 5701 is placed downstream of a particular Intel bridge. This patch detects the problematic bridge and if present, readjusts the starting address of the packet data to a dword aligned boundary. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/tg3.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++---- drivers/net/tg3.h | 1 + 2 files changed, 49 insertions(+), 4 deletions(-) --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -64,8 +64,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.90" -#define DRV_MODULE_RELDATE "April 12, 2008" +#define DRV_MODULE_VERSION "3.91" +#define DRV_MODULE_RELDATE "April 18, 2008" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -4135,11 +4135,21 @@ static int tigon3_dma_hwbug_workaround(s u32 last_plus_one, u32 *start, u32 base_flags, u32 mss) { - struct sk_buff *new_skb = skb_copy(skb, GFP_ATOMIC); + struct sk_buff *new_skb; dma_addr_t new_addr = 0; u32 entry = *start; int i, ret = 0; + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) + new_skb = skb_copy(skb, GFP_ATOMIC); + else { + int more_headroom = 4 - ((unsigned long)skb->data & 3); + + new_skb = skb_copy_expand(skb, + skb_headroom(skb) + more_headroom, + skb_tailroom(skb), GFP_ATOMIC); + } + if (!new_skb) { ret = -1; } else { @@ -4462,7 +4472,9 @@ static int tg3_start_xmit_dma_bug(struct would_hit_hwbug = 0; - if (tg3_4g_overflow_test(mapping, len)) + if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG) + would_hit_hwbug = 1; + else if (tg3_4g_overflow_test(mapping, len)) would_hit_hwbug = 1; tg3_set_txd(tp, entry, mapping, len, base_flags, @@ -11339,6 +11351,38 @@ static int __devinit tg3_get_invariants( } } + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { + static struct tg3_dev_id { + u32 vendor; + u32 device; + } bridge_chipsets[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1 }, + { }, + }; + struct tg3_dev_id *pci_id = &bridge_chipsets[0]; + struct pci_dev *bridge = NULL; + + while (pci_id->vendor != 0) { + bridge = pci_get_device(pci_id->vendor, + pci_id->device, + bridge); + if (!bridge) { + pci_id++; + continue; + } + if (bridge->subordinate && + (bridge->subordinate->number <= + tp->pdev->bus->number) && + (bridge->subordinate->subordinate >= + tp->pdev->bus->number)) { + tp->tg3_flags3 |= TG3_FLG3_5701_DMA_BUG; + pci_dev_put(bridge); + break; + } + } + } + /* The EPB bridge inside 5714, 5715, and 5780 cannot support * DMA addresses > 40-bit. This bridge may have other additional * 57xx devices behind it in some 4-port NIC designs for example. --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2476,6 +2476,7 @@ struct tg3 { #define TG3_FLG3_NO_NVRAM_ADDR_TRANS 0x00000001 #define TG3_FLG3_ENABLE_APE 0x00000002 #define TG3_FLG3_5761_5784_AX_FIXES 0x00000004 +#define TG3_FLG3_5701_DMA_BUG 0x00000008 struct timer_list timer; u16 timer_counter; -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/