Linux version 2.6.26-rc1-00006-gafa26be (jgarzik@viper.yyz.us) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun May 4 07:05:17 EDT 2008 Command line: ro root=LABEL=/ nogui BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d400 (usable) BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff9300 (usable) BIOS-e820: 000000007fff9300 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 524281) 1 entries of 3200 used max_pfn_mapped = 1048576 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping DMI 2.3 present. ACPI: RSDP 000E8010, 0024 (r2 HP ) ACPI: XSDT 7FFF94FC, 0044 (r1 HP CPQ0062 20061128 0) ACPI: FACP 7FFF96A4, 010C (r3 HP VIPER 1 0) ACPI Warning (tbfadt-0230): FADT (revision 3) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 [20080321] ACPI: DSDT 7FFF989A, 14AF (r1 HP DSDT 1 MSFT 100000E) ACPI: FACS 7FFF9300, 0040 ACPI: SSDT 7FFFAD49, 3A95 (r2 HP PROJECT 1 MSFT 100000E) ACPI: APIC 7FFF97B0, 009E (r1 HP VIPER 1 0) ACPI: SRAT 7FFF93EC, 0110 (r2 HP VIPER 1 0) ACPI: DMI detected: Hewlett-Packard SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 0, 157) 0 entries of 3200 used SRAT: Node 0 PXM 0 e8000-40000000 Entering add_active_range(0, 256, 262144) 1 entries of 3200 used SRAT: Node 1 PXM 1 40000000-80000000 Entering add_active_range(1, 262144, 524281) 2 entries of 3200 used NUMA: Allocated memnodemap from c000 - 2c040 NUMA: Using 15 for the hash shift. Bootmem setup node 0 0000000000000000-0000000040000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000002d000 - 0000000000034fff] pages 8 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-6347d3] TEXT DATA BSS early res: 3 [37cb8000-37fefd4e] RAMDISK early res: 4 [9d400-fffff] BIOS reserved early res: 5 [8000-bfff] PGTABLE early res: 6 [c000-2c03f] MEMNODEMAP Bootmem setup node 1 0000000040000000-000000007fff9000 NODE_DATA [0000000040000000 - 0000000040003fff] bootmap [0000000040004000 - 000000004000bfff] pages 8 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0 [ffffe20000e00000-ffffe20001bfffff] PMD -> [ffff810040200000-ffff810040ffffff] on node 1 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 157 0: 256 -> 262144 1: 262144 -> 524281 On node 0 totalpages: 262045 DMA zone: 56 pages used for memmap DMA zone: 1215 pages reserved DMA zone: 2726 pages, LIFO batch:0 DMA32 zone: 3528 pages used for memmap DMA32 zone: 254520 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap On node 1 totalpages: 262137 DMA zone: 0 pages used for memmap DMA32 zone: 3583 pages used for memmap DMA32 zone: 258554 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfa600000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 0, address 0xfa600000, GSI 24-27 ACPI: IOAPIC (id[0x0a] address[0xfa601000] gsi_base[28]) IOAPIC[2]: apic_id 10, version 0, address 0xfa601000, GSI 28-31 ACPI: IOAPIC (id[0x0b] address[0xfa900000] gsi_base[32]) IOAPIC[3]: apic_id 11, version 0, address 0xfa900000, GSI 32-55 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 33552 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 4 Built 2 zonelists in Node order, mobility grouping on. Total pages: 515800 Policy zone: DMA32 Kernel command line: ro root=LABEL=/ nogui Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2393.627 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Node 0: aperture @ 220000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2059968k/2097124k available (2134k kernel code, 36760k reserved, 1292k data, 328k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 4790.20 BogoMIPS (lpj=9580407) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20080321 CPU0: Dual Core AMD Opteron(tm) Processor 280 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12466795 Detected 12.466 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.36 BogoMIPS (lpj=9574722) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Dual Core AMD Opteron(tm) Processor 280 stepping 02 Booting processor 2/2 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4787.32 BogoMIPS (lpj=9574649) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Dual Core AMD Opteron(tm) Processor 280 stepping 02 Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4787.32 BogoMIPS (lpj=9574647) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Dual Core AMD Opteron(tm) Processor 280 stepping 02 Brought up 4 CPUs Total of 4 processors activated (19152.21 BogoMIPS). net_namespace: 568 bytes NET: Registered protocol family 16 node 0 link 0: io port [2000, 2fff] node 0 link 2: io port [1000, 1fff] node 1 link 0: io port [e000, efff] TOM: 0000000080000000 aka 2048M node 0 link 2: mmio [a0000, bffff] node 1 link 0: mmio [e8000000, efffffff] node 0 link 0: mmio [febf0000, febfffff] node 0 link 2: mmio [f0000000, fa6fffff] node 0 link 0: mmio [fa700000, fa8fffff] node 1 link 0: mmio [fa900000, fa9fffff] bus: 00 to node: 00 bus: 01 to node: 00 bus: 02 to node: 00 bus: 03 to node: 00 bus: 04 to node: 00 bus: 05 to node: 00 bus: 06 to node: 00 bus: 07 to node: 00 bus: 08 to node: 00 bus: 09 to node: 00 bus: 0a to node: 00 bus: 0b to node: 00 bus: 0c to node: 00 bus: 0d to node: 00 bus: 0e to node: 00 bus: 0f to node: 00 bus: 10 to node: 00 bus: 11 to node: 00 bus: 12 to node: 00 bus: 13 to node: 00 bus: 14 to node: 00 bus: 15 to node: 00 bus: 16 to node: 00 bus: 17 to node: 00 bus: 18 to node: 00 bus: 19 to node: 00 bus: 1a to node: 00 bus: 1b to node: 00 bus: 1c to node: 00 bus: 1d to node: 00 bus: 1e to node: 00 bus: 1f to node: 00 bus: 20 to node: 00 bus: 21 to node: 00 bus: 22 to node: 00 bus: 23 to node: 00 bus: 24 to node: 00 bus: 25 to node: 00 bus: 26 to node: 00 bus: 27 to node: 00 bus: 28 to node: 00 bus: 29 to node: 00 bus: 2a to node: 00 bus: 2b to node: 00 bus: 2c to node: 00 bus: 2d to node: 00 bus: 2e to node: 00 bus: 2f to node: 00 bus: 30 to node: 00 bus: 31 to node: 00 bus: 32 to node: 00 bus: 33 to node: 00 bus: 34 to node: 00 bus: 35 to node: 00 bus: 36 to node: 00 bus: 37 to node: 00 bus: 38 to node: 00 bus: 39 to node: 00 bus: 3a to node: 00 bus: 3b to node: 00 bus: 3c to node: 00 bus: 3d to node: 00 bus: 3e to node: 00 bus: 3f to node: 00 bus: 40 to node: 00 bus: 41 to node: 00 bus: 42 to node: 00 bus: 43 to node: 00 bus: 44 to node: 00 bus: 45 to node: 00 bus: 46 to node: 00 bus: 47 to node: 00 bus: 48 to node: 00 bus: 49 to node: 00 bus: 4a to node: 00 bus: 4b to node: 00 bus: 4c to node: 00 bus: 4d to node: 00 bus: 4e to node: 00 bus: 4f to node: 00 bus: 50 to node: 00 bus: 51 to node: 00 bus: 52 to node: 00 bus: 53 to node: 00 bus: 54 to node: 00 bus: 55 to node: 00 bus: 56 to node: 00 bus: 57 to node: 00 bus: 58 to node: 00 bus: 59 to node: 00 bus: 5a to node: 00 bus: 5b to node: 00 bus: 5c to node: 00 bus: 5d to node: 00 bus: 5e to node: 00 bus: 5f to node: 00 bus: 60 to node: 00 bus: 61 to node: 00 bus: 62 to node: 00 bus: 63 to node: 00 bus: 64 to node: 00 bus: 65 to node: 00 bus: 66 to node: 00 bus: 67 to node: 00 bus: 68 to node: 00 bus: 69 to node: 00 bus: 6a to node: 00 bus: 6b to node: 00 bus: 6c to node: 00 bus: 6d to node: 00 bus: 6e to node: 00 bus: 6f to node: 00 bus: 70 to node: 00 bus: 71 to node: 00 bus: 72 to node: 00 bus: 73 to node: 00 bus: 74 to node: 00 bus: 75 to node: 00 bus: 76 to node: 00 bus: 77 to node: 00 bus: 78 to node: 00 bus: 79 to node: 00 bus: 7a to node: 00 bus: 7b to node: 00 bus: 7c to node: 00 bus: 7d to node: 00 bus: 7e to node: 00 bus: 7f to node: 00 bus: 80 to node: 01 bus: 81 to node: 01 bus: 82 to node: 01 bus: 83 to node: 01 bus: 84 to node: 01 bus: 85 to node: 01 bus: 86 to node: 01 bus: 87 to node: 01 bus: 88 to node: 01 bus: 89 to node: 01 bus: 8a to node: 01 bus: 8b to node: 01 bus: 8c to node: 01 bus: 8d to node: 01 bus: 8e to node: 01 bus: 8f to node: 01 bus: 90 to node: 01 bus: 91 to node: 01 bus: 92 to node: 01 bus: 93 to node: 01 bus: 94 to node: 01 bus: 95 to node: 01 bus: 96 to node: 01 bus: 97 to node: 01 bus: 98 to node: 01 bus: 99 to node: 01 bus: 9a to node: 01 bus: 9b to node: 01 bus: 9c to node: 01 bus: 9d to node: 01 bus: 9e to node: 01 bus: 9f to node: 01 bus: a0 to node: 01 bus: a1 to node: 01 bus: a2 to node: 01 bus: a3 to node: 01 bus: a4 to node: 01 bus: a5 to node: 01 bus: a6 to node: 01 bus: a7 to node: 01 bus: a8 to node: 01 bus: a9 to node: 01 bus: aa to node: 01 bus: ab to node: 01 bus: ac to node: 01 bus: ad to node: 01 bus: ae to node: 01 bus: af to node: 01 bus: b0 to node: 01 bus: b1 to node: 01 bus: b2 to node: 01 bus: b3 to node: 01 bus: b4 to node: 01 bus: b5 to node: 01 bus: b6 to node: 01 bus: b7 to node: 01 bus: b8 to node: 01 bus: b9 to node: 01 bus: ba to node: 01 bus: bb to node: 01 bus: bc to node: 01 bus: bd to node: 01 bus: be to node: 01 bus: bf to node: 01 bus: c0 to node: 01 bus: c1 to node: 01 bus: c2 to node: 01 bus: c3 to node: 01 bus: c4 to node: 01 bus: c5 to node: 01 bus: c6 to node: 01 bus: c7 to node: 01 bus: c8 to node: 01 bus: c9 to node: 01 bus: ca to node: 01 bus: cb to node: 01 bus: cc to node: 01 bus: cd to node: 01 bus: ce to node: 01 bus: cf to node: 01 bus: d0 to node: 01 bus: d1 to node: 01 bus: d2 to node: 01 bus: d3 to node: 01 bus: d4 to node: 01 bus: d5 to node: 01 bus: d6 to node: 01 bus: d7 to node: 01 bus: d8 to node: 01 bus: d9 to node: 01 bus: da to node: 01 bus: db to node: 01 bus: dc to node: 01 bus: dd to node: 01 bus: de to node: 01 bus: df to node: 01 bus: e0 to node: 01 bus: e1 to node: 01 bus: e2 to node: 01 bus: e3 to node: 01 bus: e4 to node: 01 bus: e5 to node: 01 bus: e6 to node: 01 bus: e7 to node: 01 bus: e8 to node: 01 bus: e9 to node: 01 bus: ea to node: 01 bus: eb to node: 01 bus: ec to node: 01 bus: ed to node: 01 bus: ee to node: 01 bus: ef to node: 01 bus: f0 to node: 01 bus: f1 to node: 01 bus: f2 to node: 01 bus: f3 to node: 01 bus: f4 to node: 01 bus: f5 to node: 01 bus: f6 to node: 01 bus: f7 to node: 01 bus: f8 to node: 01 bus: f9 to node: 01 bus: fa to node: 01 bus: fb to node: 01 bus: fc to node: 01 bus: fd to node: 01 bus: fe to node: 01 bus: ff to node: 01 bus: [00,3f] on node 0 link 0 bus: 00 index 0 io port: [2000, dfff] bus: 00 index 1 io port: [0, fff] bus: 00 index 2 io port: [f000, ffff] bus: 00 index 3 mmio: [faa00000, fcffffffff] bus: 00 index 4 mmio: [fa700000, fa8fffff] bus: 00 index 5 mmio: [80000000, e7ffffff] bus: [40,7f] on node 0 link 2 bus: 40 index 0 io port: [1000, 1fff] bus: 40 index 1 mmio: [a0000, bffff] bus: 40 index 2 mmio: [f0000000, fa6fffff] bus: [80,ff] on node 1 link 0 bus: 80 index 0 io port: [e000, efff] bus: 80 index 1 mmio: [e8000000, efffffff] bus: 80 index 2 mmio: [fa900000, fa9fffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPA._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.GLMA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.GLMB._PRT] ACPI: PCI Root Bridge [PCI2] (0000:80) ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKW] (IRQs *48), disabled. ACPI: PCI Interrupt Link [LNKX] (IRQs *49), disabled. ACPI: PCI Interrupt Link [LNKY] (IRQs *50), disabled. ACPI: PCI Interrupt Link [LNKZ] (IRQs *51), disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LSB0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSB2] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing ACPI: RTC can wake from S4 system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x400-0x47f has been reserved system 00:0b: ioport range 0x480-0x48f has been reserved system 00:0b: ioport range 0xf800-0xf87f has been reserved system 00:0b: ioport range 0xf880-0xf8ff has been reserved system 00:0b: ioport range 0xf900-0xf97f has been reserved system 00:0b: ioport range 0xf980-0xf9ff has been reserved system 00:0b: ioport range 0xfa00-0xfa7f has been reserved system 00:0b: ioport range 0xfa80-0xfaff has been reserved system 00:0b: ioport range 0xfc00-0xfc7f has been reserved system 00:0b: ioport range 0xfc80-0xfcff has been reserved system 00:0b: ioport range 0xfe00-0xfe7f has been reserved system 00:0b: ioport range 0xfe80-0xfeff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved system 00:0e: iomem range 0xe8000-0xfffff could not be reserved system 00:0e: iomem range 0xfec01000-0xffffffff could not be reserved system 00:0e: iomem range 0xd8000-0xdffff has been reserved PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: 0xfa700000-0xfa7fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:40:01.0 IO window: disabled. MEM window: 0xf9000000-0xf9ffffff PREFETCH window: 0x00000000f0000000-0x00000000f80fffff PCI: Bridge: 0000:40:02.0 IO window: 1000-1fff MEM window: 0xfa000000-0xfa5fffff PREFETCH window: disabled. NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3295k freed audit: initializing netlink socket (disabled) type=2000 audit(1209899239.740:1): initialized Total HugeTLB memory allocated, 0 msgmni has been set to 4029 for ipc namespace ffffffff80527fc0 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:40:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:40:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:40:02.0: MSI quirk detected; subordinate MSI disabled pci 0000:40:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:41:04.0: Boot video device pci 0000:80:00.0: Enabling HT MSI Mapping PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PBTN] ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16. input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 328k freed end_request: I/O error, dev fd0, sector 0 ACPI: PCI Interrupt Link [LSB2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LSB2] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xfebf0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LSB0] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfa800000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected end_request: I/O error, dev fd0, sector 0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 ACPI: PCI Interrupt 0000:61:06.0[A] -> GSI 30 (level, low) -> IRQ 30 mptbase: ioc0: Initiating bringup ioc0: LSI53C1030 B2: Capabilities={Initiator,Target} scsi0 : ioc0: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=30 ACPI: PCI Interrupt 0000:61:06.1[B] -> GSI 31 (level, low) -> IRQ 31 mptbase: ioc1: Initiating bringup ioc1: LSI53C1030 B2: Capabilities={Initiator,Target} scsi1 : ioc1: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=31 No dock devices found. libata version 3.00 loaded. sata_mv 0000:61:04.0: version 1.20 ACPI: PCI Interrupt 0000:61:04.0[A] -> GSI 28 (level, low) -> IRQ 28 sata_mv 0000:61:04.0: Applying 60X1C0 workarounds to unknown rev sata_mv 0000:61:04.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx scsi2 : sata_mv scsi3 : sata_mv scsi4 : sata_mv scsi5 : sata_mv ata1: SATA max UDMA/133 mmio m1048576@0xfa000000 port 0xfa022000 irq 28 ata2: SATA max UDMA/133 mmio m1048576@0xfa000000 port 0xfa024000 irq 28 ata3: SATA max UDMA/133 mmio m1048576@0xfa000000 port 0xfa026000 irq 28 ata4: SATA max UDMA/133 mmio m1048576@0xfa000000 port 0xfa028000 irq 28 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7: Maxtor 6Y200M0, YAR51VW0, max UDMA/133 ata3.00: 398297088 sectors, multi 0: LBA48 ata3.00: applying bridge limits ata3.00: configured for UDMA/100 ata4: SATA link down (SStatus 0 SControl 300) scsi 4:0:0:0: Direct-Access ATA Maxtor 6Y200M0 YAR5 PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 4:0:0:0: [sda] Attached SCSI disk sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSA0] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi6 : sata_nv scsi7 : sata_nv ata5: SATA max UDMA/133 cmd 0x28d0 ctl 0x28f8 bmdma 0x28b0 irq 21 ata6: SATA max UDMA/133 cmd 0x28d8 ctl 0x28fc bmdma 0x28b8 irq 21 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-7: WDC WD800JD-60LSA1, 10.01E01, max UDMA/100 ata6.00: 156301488 sectors, multi 16: LBA48 ata6.00: configured for UDMA/100 isa bounce pool size: 16 pages scsi 7:0:0:0: Direct-Access ATA WDC WD800JD-60LS 10.0 PQ: 0 ANSI: 5 sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > sd 7:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA1] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi8 : sata_nv scsi9 : sata_nv ata7: SATA max UDMA/133 cmd 0x28e0 ctl 0x2c00 bmdma 0x28c0 irq 20 ata8: SATA max UDMA/133 cmd 0x28e8 ctl 0x2c04 bmdma 0x28c8 irq 20 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:06.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi10 : pata_amd scsi11 : pata_amd ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x28a0 irq 14 ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x28a8 irq 15 ata9.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0018, max UDMA/44 ata9: nv_mode_filter: 0xf39f&0xf01f->0xf01f, BIOS=0xf000 (0xc4000000) ACPI=0xf01f (39:4294967295:0x13) ata9.00: limited to UDMA/33 due to 40-wire cable ata9.00: configured for UDMA/33 scsi 10:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0018 PQ: 0 ANSI: 5 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:04.0 to 64 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k Driver 'sr' needs updating - please use bus_type methods BUG: unable to handle kernel NULL pointer dereference at 00000000000005d8 IP: [] get_page_from_freelist+0x43/0x573 PGD 7e90f067 PUD 7edbc067 PMD 0 Oops: 0000 [1] SMP CPU 3 Modules linked in: sr_mod(+) cdrom rtc_cmos ohci1394(+) i2c_nforce2(+) forcedeth(+) snd_intel8x0(+) i2c_core snd_ac97_codec ac97_bus pata_amd sata_nv sata_mv libata dock mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod ext3 jbd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 945, comm: modprobe Not tainted 2.6.26-rc1-00006-gafa26be #1 RIP: 0010:[] [] get_page_from_freelist+0x43/0x573 RSP: 0018:ffff81007edffb88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81007edffbf0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff810040002a58 RBP: ffff81003fc01b80 R08: 0000000000000000 R09: 0000000000000044 R10: 0000000000000000 R11: ffffffffffffffe1 R12: ffff810040002a40 R13: 0000000000000000 R14: ffff81007f9eb450 R15: ffff810040002a40 FS: 00007f47bd9456f0(0000) GS:ffff81007fa91f40(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000005d8 CR3: 000000007e90c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 945, threadinfo ffff81007edfe000, task ffff81007f9eb450) Stack: 000612d000000005 0000004400000010 0000000000000000 0000000000000000 000612d18026473f ffffffff01bacb28 ffff81007fa46e30 ffff81003fc01180 ffff81003fc01180 0000000000000000 0000000000000000 0000000000000286 Call Trace: [] ? __alloc_pages_internal+0xd6/0x3b6 [] ? kmem_getpages+0x96/0x15f [] ? cache_grow+0xa3/0x206 [] ? cache_alloc_refill+0x1cc/0x21a [] ? kmem_cache_alloc+0x62/0xdc [] ? :sr_mod:sr_probe+0x17b/0x4a9 [] ? driver_probe_device+0xd7/0x164 [] ? __driver_attach+0x46/0x6d [] ? __driver_attach+0x0/0x6d [] ? bus_for_each_dev+0x44/0x6f [] ? bus_add_driver+0xb4/0x203 [] ? check_preempt_wakeup+0xb8/0xe2 [] ? driver_register+0x8d/0x101 [] ? :sr_mod:init_sr+0x24/0x3f [] ? sys_init_module+0x9b/0x1a9 [] ? system_call_after_swapgs+0x7b/0x80 Code: 8d 79 08 48 8d 4c 24 68 48 89 74 24 18 89 54 24 14 48 89 f2 44 89 c6 44 89 44 24 10 44 89 4c 24 0c e8 f0 60 00 00 48 8b 44 24 68 <48> 2b 80 d8 05 00 00 48 c7 44 24 38 00 00 00 00 c7 44 24 48 00 RIP [] get_page_from_freelist+0x43/0x573 RSP CR2: 00000000000005d8 ---[ end trace b855add3ff8e834e ]--- sd 4:0:0:0: Attached scsi generic sg0 type 0 sd 7:0:0:0: Attached scsi generic sg1 type 0 sr 10:0:0:0: Attached scsi generic sg2 type 5 intel8x0_measure_ac97_clock: measured 54835 usecs intel8x0: clocking to 46862 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2800 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2840 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:03 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 ACPI: PCI Interrupt 0000:05:05.0[A] -> Link [LNKD] -> GSI 19 (level, high) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa704000-fa7047ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0060b000001832e3] EXT3 FS on sdb1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4096564k swap on /dev/sdb3. Priority:-1 extents:1 across:4096564k warning: process `kudzu' used the deprecated sysctl system call with 1.23. powernow-k8: Found 2 Dual Core AMD Opteron(tm) Processor 280 processors (4 cpu cores) (version 2.20.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure NET: Registered protocol family 10 lo: Disabled Privacy Extensions RPC: Registered udp transport module. RPC: Registered tcp transport module. warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)