| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080507160907.GH17806@roarinelk.homelinux.net>
Date: Wed, 7 May 2008 18:09:07 +0200
From: Manuel Lauss <mano@...rinelk.homelinux.net>
To: linux-mips@...ux-mips.org, linux-kernel@...r.kernel.org
Subject: [PATCH 7/7] au1xmmc: codingstyle tidying
>From fc2578032bfc08799ab4766513d8f04674397166 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mlau@...-ge.com>
Date: Wed, 7 May 2008 15:30:14 +0200
Subject: [PATCH] au1xmmc: codingstyle tidying
Make the driver source a bit easier on the eyes;
no functional changes.
Signed-off-by: Manuel Lauss <mano@...rinelk.homelinux.net>
---
drivers/mmc/host/au1xmmc.c | 160 ++++++++++++++++---------------------------
1 files changed, 60 insertions(+), 100 deletions(-)
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 513937a..ea9f7ec 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -63,9 +63,9 @@
#define AU1XMMC_DESCRIPTOR_COUNT 1
#define AU1XMMC_DESCRIPTOR_SIZE 4096
-#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
- MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
- MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
+#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
+ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
/* Easy access macros */
@@ -82,24 +82,19 @@
#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG)
#define DMA_CHANNEL(h) \
- ( ((h)->flags & HOST_F_XMIT) ? (h)->dma.tx_chan : (h)->dma.rx_chan)
+ (((h)->flags & HOST_F_XMIT) ? (h)->dma.tx_chan : (h)->dma.rx_chan)
/* This gives us a hard value for the stop command that we can write directly
* to the command register
*/
-
-#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO)
+#define STOP_CMD (SD_CMD_RT_1B | SD_CMD_CT_7 | \
+ (0xC << SD_CMD_CI_SHIFT) | SD_CMD_GO)
/* This is the set of interrupts that we configure by default */
-
-#if 0
-#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \
- SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
-#endif
-
#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \
SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
-/* The poll event (looking for insert/remove events runs twice a second */
+
+/* The poll event (looking for insert/remove events) runs twice a second */
#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
/* Status flags used by the host structure */
@@ -158,7 +153,6 @@ static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
static inline void SEND_STOP(struct au1xmmc_host *host)
{
-
u32 config2;
WARN_ON(host->status != HOST_S_DATA);
@@ -278,18 +272,14 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
au_sync();
/* Wait for the command to go on the line */
-
- while(1) {
- if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO))
- break;
- }
+ while (au_readl(HOST_CMD(host)) & SD_CMD_GO)
+ /* nop */;
/* Wait for the command to come back */
-
if (wait) {
u32 status = au_readl(HOST_STATUS(host));
- while(!(status & SD_STATUS_CR))
+ while (!(status & SD_STATUS_CR))
status = au_readl(HOST_STATUS(host));
/* Clear the CR status */
@@ -303,12 +293,11 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
{
-
struct mmc_request *mrq = host->mrq;
struct mmc_data *data;
u32 crc;
- WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP);
+ WARN_ON((host->status != HOST_S_DATA) && (host->status != HOST_S_STOP));
if (host->mrq == NULL)
return;
@@ -319,15 +308,13 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
status = au_readl(HOST_STATUS(host));
/* The transaction is really over when the SD_STATUS_DB bit is clear */
-
- while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
+ while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
status = au_readl(HOST_STATUS(host));
data->error = 0;
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
/* Process any errors */
-
crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
if (host->flags & HOST_F_XMIT)
crc |= ((status & 0x07) == 0x02) ? 0 : 1;
@@ -344,11 +331,10 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
if (host->flags & HOST_F_DMA) {
u32 chan = DMA_CHANNEL(host);
- chan_tab_t *c = *((chan_tab_t **) chan);
+ chan_tab_t *c = *((chan_tab_t **)chan);
au1x_dma_chan_t *cp = c->chan_ptr;
data->bytes_xfered = cp->ddma_bytecnt;
- }
- else
+ } else
data->bytes_xfered =
(data->blocks * data->blksz) -
host->pio.len;
@@ -359,7 +345,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
static void au1xmmc_tasklet_data(unsigned long param)
{
- struct au1xmmc_host *host = (struct au1xmmc_host *) param;
+ struct au1xmmc_host *host = (struct au1xmmc_host *)param;
u32 status = au_readl(HOST_STATUS(host));
au1xmmc_data_complete(host, status);
@@ -369,11 +355,10 @@ static void au1xmmc_tasklet_data(unsigned long param)
static void au1xmmc_send_pio(struct au1xmmc_host *host)
{
-
- struct mmc_data *data = 0;
- int sg_len, max, count = 0;
- unsigned char *sg_ptr;
- u32 status = 0;
+ struct mmc_data *data;
+ int sg_len, max, count;
+ unsigned char *sg_ptr, val;
+ u32 status;
struct scatterlist *sg;
data = host->mrq->data;
@@ -388,22 +373,19 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
/* This is the space left inside the buffer */
sg_len = data->sg[host->pio.index].length - host->pio.offset;
- /* Check to if we need less then the size of the sg_buffer */
-
+ /* Check if we need less than the size of the sg_buffer */
max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
- if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER;
-
- for(count = 0; count < max; count++ ) {
- unsigned char val;
+ if (max > AU1XMMC_MAX_TRANSFER)
+ max = AU1XMMC_MAX_TRANSFER;
+ for (count = 0; count < max; count++) {
status = au_readl(HOST_STATUS(host));
-
if (!(status & SD_STATUS_TH))
break;
val = *sg_ptr++;
- au_writel((unsigned long) val, HOST_TXPORT(host));
+ au_writel((unsigned long)val, HOST_TXPORT(host));
au_sync();
}
@@ -427,11 +409,10 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
static void au1xmmc_receive_pio(struct au1xmmc_host *host)
{
-
- struct mmc_data *data = 0;
- int sg_len = 0, max = 0, count = 0;
- unsigned char *sg_ptr = 0;
- u32 status = 0;
+ struct mmc_data *data;
+ int sg_len = 0, max, count;
+ unsigned char *sg_ptr = NULL;
+ u32 status;
struct scatterlist *sg;
data = host->mrq->data;
@@ -449,13 +430,14 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
/* Check to if we need less then the size of the sg_buffer */
- if (sg_len < max) max = sg_len;
+ if (sg_len < max)
+ max = sg_len;
}
if (max > AU1XMMC_MAX_TRANSFER)
max = AU1XMMC_MAX_TRANSFER;
- for(count = 0; count < max; count++ ) {
+ for (count = 0; count < max; count++) {
u32 val;
status = au_readl(HOST_STATUS(host));
@@ -472,8 +454,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
DBG("RX Overrun [%d + %d]\n", host->id,
host->pio.len, count);
break;
- }
- else if (status & SD_STATUS_RU) {
+ } else if (status & SD_STATUS_RU) {
DBG("RX Underrun [%d + %d]\n", host->id,
host->pio.len, count);
break;
@@ -488,13 +469,13 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
host->pio.len -= count;
host->pio.offset += count;
- if (sg_len && count == sg_len) {
+ if (sg_len && (count == sg_len)) {
host->pio.index++;
host->pio.offset = 0;
}
if (host->pio.len == 0) {
- //IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF);
+ /* IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); */
IRQ_OFF(host, SD_CONFIG_NE);
if (host->flags & HOST_F_STOP)
@@ -504,14 +485,11 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
}
}
-/* static void au1xmmc_cmd_complete
- This is called when a command has been completed - grab the response
- and check for errors. Then start the data transfer if it is indicated.
-*/
-
+/* This is called when a command has been completed - grab the response
+ * and check for errors. Then start the data transfer if it is indicated.
+ */
static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
{
-
struct mmc_request *mrq = host->mrq;
struct mmc_command *cmd;
int trans;
@@ -536,7 +514,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
* we only got 120 bytes, but the engine expects
* 128 bits, so we have to shift things up
*/
-
for(i = 0; i < 4; i++) {
cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
if (i != 3)
@@ -555,15 +532,13 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
}
/* Figure out errors */
-
if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
cmd->error = -EILSEQ;
trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
if (!trans || cmd->error) {
-
- IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF);
+ IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF);
tasklet_schedule(&host->finish_task);
return;
}
@@ -574,29 +549,25 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
u32 channel = DMA_CHANNEL(host);
/* Start the DMA as soon as the buffer gets something in it */
-
if (host->flags & HOST_F_RECV) {
u32 mask = SD_STATUS_DB | SD_STATUS_NE;
- while((status & mask) != mask)
+ while ((status & mask) != mask)
status = au_readl(HOST_STATUS(host));
}
-
au1xxx_dbdma_start(channel);
}
}
static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
{
-
unsigned int pbus = get_au1x00_speed();
unsigned int divisor;
u32 config;
/* From databook:
- divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
- */
-
+ * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
+ */
pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
pbus /= 2;
@@ -614,7 +585,6 @@ static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
static int
au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
{
-
int datalen = data->blocks * data->blksz;
if (dma != 0)
@@ -645,32 +615,31 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
au1xxx_dbdma_stop(channel);
for(i = 0; i < host->dma.len; i++) {
- u32 ret = 0, flags = DDMA_FLAGS_NOIE;
+ u32 ret, flags;
struct scatterlist *sg = &data->sg[i];
int sg_len = sg->length;
int len = (datalen > sg_len) ? sg_len : datalen;
- if (i == host->dma.len - 1)
+ if (i == (host->dma.len - 1))
flags = DDMA_FLAGS_IE;
-
- if (host->flags & HOST_F_XMIT){
- ret = au1xxx_dbdma_put_source_flags(channel,
- (void *) sg_virt(sg), len, flags);
- }
- else {
- ret = au1xxx_dbdma_put_dest_flags(channel,
- (void *) sg_virt(sg),
- len, flags);
+ else
+ flags = DDMA_FLAGS_NOIE;
+
+ if (host->flags & HOST_F_XMIT){
+ ret = au1xxx_dbdma_put_source_flags(channel,
+ (void *)sg_virt(sg), len, flags);
+ } else {
+ ret = au1xxx_dbdma_put_dest_flags(channel,
+ (void *)sg_virt(sg), len, flags);
}
- if (!ret)
+ if (!ret)
goto dataerr;
datalen -= len;
}
- }
- else {
+ } else {
host->pio.index = 0;
host->pio.offset = 0;
host->pio.len = datalen;
@@ -679,25 +648,19 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
IRQ_ON(host, SD_CONFIG_TH);
else
IRQ_ON(host, SD_CONFIG_NE);
- //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
+ /* IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF); */
}
return 0;
- dataerr:
+dataerr:
dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir);
return -ETIMEDOUT;
}
-/* static void au1xmmc_request
- This actually starts a command or data transaction
-*/
-
static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
{
-
struct au1xmmc_host *host = mmc_priv(mmc);
- unsigned int flags = 0;
int ret = 0;
WARN_ON(irqs_disabled());
@@ -712,7 +675,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
if (mrq->data) {
FLUSH_FIFO(host);
- flags = mrq->data->flags;
ret = au1xmmc_prepare_data(host, mrq->data);
}
@@ -727,7 +689,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
static void au1xmmc_reset_controller(struct au1xmmc_host *host)
{
-
/* Apply the clock */
au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
au_sync_delay(1);
@@ -757,7 +718,7 @@ static void au1xmmc_reset_controller(struct au1xmmc_host *host)
}
-static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
+static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct au1xmmc_host *host = mmc_priv(mmc);
u32 config;
@@ -788,10 +749,9 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
static void au1xmmc_dma_callback(int irq, void *dev_id)
{
- struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
+ struct au1xmmc_host *host = (struct au1xmmc_host *)dev_id;
/* Avoid spurious interrupts */
-
if (!host->mrq)
return;
@@ -840,7 +800,7 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
#endif
else if (status & (SD_STATUS_CR)) {
if (host->status == HOST_S_CMD)
- au1xmmc_cmd_complete(host,status);
+ au1xmmc_cmd_complete(host, status);
} else if (!(host->flags & HOST_F_DMA)) {
if ((host->flags & HOST_F_XMIT) && (status & STATUS_DATA_OUT))
--
1.5.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists