| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080507200228.GA17810@elte.hu>
Date: Wed, 7 May 2008 22:02:29 +0200
From: Ingo Molnar <mingo@...e.hu>
To: linux-kernel@...r.kernel.org,
Michael Halcrow <mhalcrow@...ibm.com>,
Eric Sandeen <sandeen@...hat.com>
Cc: Peter Zijlstra <a.p.zijlstra@...llo.nl>
Subject: [v2.6.26-rc1] possible circular locking in ecryptfs
x86.git testing found the following "possible circular locking" lockdep
warning, generated by the ecryptfs code:
| multipath.stati/2972 is trying to acquire lock:
| (&ecryptfs_daemon_hash_mux){--..}, at: [<ffffffff80321745>] ecryptfs_miscdev_open+0x23/0x13b
|
| but task is already holding lock:
| (misc_mtx){--..}, at: [<ffffffff8043da31>] misc_open+0x22/0xf0
|
| which lock already depends on the new lock.
with the following config:
http://redhat.com/~mingo/private/config-Wed_May__7_16_17_31_CEST_2008.bad
full log attached below. Have not looked into the details yet.
Ingo
---------------------------->
Linux version 2.6.26-rc1-sched-devel.git-x86-latest.git (mingo@...ne) (gcc version 4.2.3) #76 Wed May 7 16:18:39 CEST 2008
Command line: root=/dev/sda6 console=ttyS0,115200 earlyprintk=serial,ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 profile=0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabled
debug: ignoring loglevel setting.
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262128) 1 entries of 256 used
max_pfn_mapped = 1048576
init_memory_mapping
ACPI: RSDP 000F76F0, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 3FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SRAT 3FFF9500, 00A0 (r1 AMD HAMMER 1 AMD 1)
ACPI: MCFG 3FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 3FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262128) 1 entries of 256 used
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] TRAMPOLINE
early res: 2 [200000-1257737] TEXT DATA BSS
early res: 3 [9f800-fffff] BIOS reserved
early res: 4 [8000-afff] PGTABLE
Scan SMP from ffff810000000000 for 1024 bytes.
Scan SMP from ffff81000009fc00 for 1024 bytes.
Scan SMP from ffff8100000f0000 for 65536 bytes.
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001400000-ffff8100021fffff] on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 262128
On node 0 totalpages: 262031
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3839 pages, LIFO batch:0
DMA32 zone: 3527 pages used for memmap
DMA32 zone: 254505 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Int: type 0, pol 1, trig 1, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Int: type 0, pol 1, trig 1, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
ACPI: IRQ9 used by override.
Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffffffff5fb000 ( fee00000)
mapped IOAPIC to ffffffffff5fa000 (00000000fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258344
Kernel command line: root=/dev/sda6 console=ttyS0,115200 earlyprintk=serial,ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 profile=0
debug: sysrq always enabled.
kernel profiling enabled (shift: 0)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PIT
time.c: Detected 2010.329 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console handover: boot [earlyser0] -> real [ttyS0]
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1648 kB
per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 923976k/1048512k available (6311k kernel code, 123500k reserved, 3898k data, 324k init)
CPA: page pool initialized 16 of 16 pages preallocated
Calibrating delay using timer specific routine.. 4025.08 BogoMIPS (lpj=6705737)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
ACPI: Core revision 20080321
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x32 -> IRQ 2 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
Using local APIC timer interrupts.
APIC timer calibration result 12564548
Detected 12.564 MHz APIC timer.
Testing NMI watchdog ... OK.
PM: Adding info for No Bus:platform
calling init_cpufreq_transition_notifier_list+0x0/0x1b()
initcall init_cpufreq_transition_notifier_list+0x0/0x1b() returned 0 after 0 msecs
calling net_ns_init+0x0/0x140()
net_namespace: 1008 bytes
initcall net_ns_init+0x0/0x140() returned 0 after 3 msecs
calling cpufreq_tsc+0x0/0x16()
initcall cpufreq_tsc+0x0/0x16() returned 0 after 0 msecs
calling print_banner+0x0/0xe()
Booting paravirtualized kernel on bare hardware
initcall print_banner+0x0/0xe() returned 0 after 3 msecs
calling ksysfs_init+0x0/0xbb()
initcall ksysfs_init+0x0/0xbb() returned 0 after 0 msecs
calling init_jiffies_clocksource+0x0/0x12()
initcall init_jiffies_clocksource+0x0/0x12() returned 0 after 0 msecs
calling pm_init+0x0/0x34()
initcall pm_init+0x0/0x34() returned 0 after 0 msecs
calling pm_disk_init+0x0/0x19()
initcall pm_disk_init+0x0/0x19() returned 0 after 0 msecs
calling swsusp_header_init+0x0/0x2c()
initcall swsusp_header_init+0x0/0x2c() returned 0 after 0 msecs
calling filelock_init+0x0/0x2e()
initcall filelock_init+0x0/0x2e() returned 0 after 0 msecs
calling init_misc_binfmt+0x0/0x3f()
initcall init_misc_binfmt+0x0/0x3f() returned 0 after 0 msecs
calling init_script_binfmt+0x0/0x12()
initcall init_script_binfmt+0x0/0x12() returned 0 after 0 msecs
calling init_elf_binfmt+0x0/0x12()
initcall init_elf_binfmt+0x0/0x12() returned 0 after 0 msecs
calling init_compat_elf_binfmt+0x0/0x12()
initcall init_compat_elf_binfmt+0x0/0x12() returned 0 after 0 msecs
calling debugfs_init+0x0/0x51()
initcall debugfs_init+0x0/0x51() returned 0 after 0 msecs
calling securityfs_init+0x0/0x51()
initcall securityfs_init+0x0/0x51() returned 0 after 0 msecs
calling random32_init+0x0/0x1b()
initcall random32_init+0x0/0x1b() returned 0 after 0 msecs
calling early_resume_init+0x0/0x1d5()
Time: 15:18:58 Date: 05/07/08
initcall early_resume_init+0x0/0x1d5() returned 0 after 3 msecs
calling cpufreq_core_init+0x0/0x2c()
initcall cpufreq_core_init+0x0/0x2c() returned 0 after 0 msecs
calling sock_init+0x0/0x5e()
initcall sock_init+0x0/0x5e() returned 0 after 3 msecs
calling netpoll_init+0x0/0x41()
initcall netpoll_init+0x0/0x41() returned 0 after 0 msecs
calling netlink_proto_init+0x0/0x14d()
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14d() returned 0 after 0 msecs
calling bdi_class_init+0x0/0x3d()
initcall bdi_class_init+0x0/0x3d() returned 0 after 0 msecs
calling kobject_uevent_init+0x0/0x45()
initcall kobject_uevent_init+0x0/0x45() returned 0 after 0 msecs
calling pcibus_class_init+0x0/0x12()
initcall pcibus_class_init+0x0/0x12() returned 0 after 0 msecs
calling pci_driver_init+0x0/0x12()
initcall pci_driver_init+0x0/0x12() returned 0 after 0 msecs
calling lcd_class_init+0x0/0x49()
initcall lcd_class_init+0x0/0x49() returned 0 after 0 msecs
calling tty_class_init+0x0/0x2a()
initcall tty_class_init+0x0/0x2a() returned 0 after 0 msecs
calling vtconsole_class_init+0x0/0xb9()
PM: Adding info for No Bus:vtcon0
initcall vtconsole_class_init+0x0/0xb9() returned 0 after 3 msecs
calling early_fill_mp_bus_info+0x0/0x7c2()
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [feb00000, fec0ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fed3ffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [40000000, fcffffffff]
bus: 00 index 2 mmio: [feb00000, fec0ffff]
bus: 00 index 3 mmio: [a0000, bffff]
initcall early_fill_mp_bus_info+0x0/0x7c2() returned 0 after 34 msecs
calling arch_kdebugfs_init+0x0/0x1f4()
initcall arch_kdebugfs_init+0x0/0x1f4() returned 0 after 0 msecs
calling ffh_cstate_init+0x0/0x2c()
initcall ffh_cstate_init+0x0/0x2c() returned -1 after 0 msecs
initcall ffh_cstate_init+0x0/0x2c() returned with error code -1
calling acpi_pci_init+0x0/0x45()
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x45() returned 0 after 3 msecs
calling init_acpi_device_notify+0x0/0x4b()
initcall init_acpi_device_notify+0x0/0x4b() returned 0 after 0 msecs
calling pci_access_init+0x0/0x40()
PCI: Using configuration type 1 for base access
initcall pci_access_init+0x0/0x40() returned 0 after 3 msecs
calling topology_init+0x0/0x16()
initcall topology_init+0x0/0x16() returned 0 after 0 msecs
calling param_sysfs_init+0x0/0x1d6()
initcall param_sysfs_init+0x0/0x1d6() returned 0 after 25 msecs
calling pm_sysrq_init+0x0/0x19()
initcall pm_sysrq_init+0x0/0x19() returned 0 after 0 msecs
calling readahead_init+0x0/0x38()
PM: Adding info for No Bus:default
initcall readahead_init+0x0/0x38() returned 0 after 3 msecs
calling init_bio+0x0/0xc5()
initcall init_bio+0x0/0xc5() returned 0 after 0 msecs
calling blk_settings_init+0x0/0x2a()
initcall blk_settings_init+0x0/0x2a() returned 0 after 0 msecs
calling blk_ioc_init+0x0/0x2a()
initcall blk_ioc_init+0x0/0x2a() returned 0 after 0 msecs
calling genhd_device_init+0x0/0x40()
initcall genhd_device_init+0x0/0x40() returned 0 after 0 msecs
calling acpi_init+0x0/0x21c()
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
initcall acpi_init+0x0/0x21c() returned 0 after 38 msecs
calling acpi_scan_init+0x0/0x110()
PM: Adding info for acpi:LNXSYSTM:00
PM: Adding info for acpi:LNXPWRBN:00
PM: Adding info for acpi:ACPI0007:00
PM: Adding info for acpi:ACPI0007:01
PM: Adding info for acpi:device:00
PM: Adding info for acpi:PNP0C0C:00
PM: Adding info for acpi:PNP0A08:00
PM: Adding info for acpi:PNP0C02:00
PM: Adding info for acpi:device:01
PM: Adding info for acpi:device:02
PM: Adding info for acpi:device:03
PM: Adding info for acpi:device:04
PM: Adding info for acpi:device:05
PM: Adding info for acpi:device:06
PM: Adding info for acpi:device:07
PM: Adding info for acpi:device:08
PM: Adding info for acpi:device:09
PM: Adding info for acpi:device:0a
PM: Adding info for acpi:device:0b
PM: Adding info for acpi:device:0c
PM: Adding info for acpi:device:0d
PM: Adding info for acpi:device:0e
PM: Adding info for acpi:device:0f
PM: Adding info for acpi:device:10
PM: Adding info for acpi:device:11
PM: Adding info for acpi:device:12
PM: Adding info for acpi:device:13
PM: Adding info for acpi:device:14
PM: Adding info for acpi:device:15
PM: Adding info for acpi:device:16
PM: Adding info for acpi:device:17
PM: Adding info for acpi:device:18
PM: Adding info for acpi:device:19
PM: Adding info for acpi:device:1a
PM: Adding info for acpi:device:1b
PM: Adding info for acpi:device:1c
PM: Adding info for acpi:device:1d
PM: Adding info for acpi:ATK0110:00
PM: Adding info for acpi:PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:07
PM: Adding info for acpi:PNP0C0F:08
PM: Adding info for acpi:PNP0C0F:09
PM: Adding info for acpi:PNP0C0F:0a
PM: Adding info for acpi:PNP0C0F:0b
PM: Adding info for acpi:PNP0C0F:0c
PM: Adding info for acpi:PNP0C0F:0d
PM: Adding info for acpi:PNP0C0F:0e
PM: Adding info for acpi:PNP0C0F:0f
PM: Adding info for acpi:PNP0C0F:10
PM: Adding info for acpi:PNP0C0F:11
PM: Adding info for acpi:PNP0C0F:12
PM: Adding info for acpi:PNP0C0F:13
PM: Adding info for acpi:PNP0C0F:14
PM: Adding info for acpi:PNP0C0F:15
PM: Adding info for acpi:PNP0C0F:16
PM: Adding info for acpi:PNP0C0F:17
PM: Adding info for acpi:PNP0C0F:18
PM: Adding info for acpi:PNP0C0F:19
PM: Adding info for acpi:PNP0C0F:1a
PM: Adding info for acpi:PNP0C0F:1b
PM: Adding info for acpi:PNP0C0F:1c
PM: Adding info for acpi:PNP0C0F:1d
PM: Adding info for acpi:PNP0C0F:1e
PM: Adding info for acpi:PNP0C0F:1f
PM: Adding info for acpi:PNP0C02:01
PM: Adding info for acpi:PNP0000:00
PM: Adding info for acpi:PNP0200:00
PM: Adding info for acpi:PNP0100:00
PM: Adding info for acpi:PNP0B00:00
PM: Adding info for acpi:PNP0800:00
PM: Adding info for acpi:PNP0C04:00
PM: Adding info for acpi:PNP0700:00
PM: Adding info for acpi:PNP0501:00
PM: Adding info for acpi:PNP0401:00
PM: Adding info for acpi:PNP0F13:00
PM: Adding info for acpi:PNP0303:00
PM: Adding info for acpi:PNPB006:00
PM: Adding info for acpi:PNPB02F:00
PM: Adding info for acpi:PNP0C02:02
PM: Adding info for acpi:PNP0C01:00
PM: Adding info for acpi:LNXTHERM:00
PM: Adding info for acpi:PNP0C0B:00
PM: Adding info for acpi:LNXTHERM:01
initcall acpi_scan_init+0x0/0x110() returned 0 after 298 msecs
calling acpi_ec_init+0x0/0x61()
initcall acpi_ec_init+0x0/0x61() returned 0 after 3 msecs
calling acpi_pci_root_init+0x0/0x28()
ACPI: PCI Root Bridge [PCI0] (0000:00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for No Bus:0000:00
PCI: Transparent bridge - 0000:00:09.0
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:01.1
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:02.1
PM: Adding info for pci:0000:00:04.0
PM: Adding info for pci:0000:00:06.0
PM: Adding info for pci:0000:00:09.0
PM: Adding info for pci:0000:00:0a.0
PM: Adding info for pci:0000:00:0b.0
PM: Adding info for pci:0000:00:0c.0
PM: Adding info for pci:0000:00:0d.0
PM: Adding info for pci:0000:00:0e.0
PM: Adding info for pci:0000:00:18.0
PM: Adding info for pci:0000:00:18.1
PM: Adding info for pci:0000:00:18.2
PM: Adding info for pci:0000:00:18.3
PM: Adding info for pci:0000:05:07.0
PM: Adding info for No Bus:0000:05
PM: Adding info for No Bus:0000:04
PM: Adding info for No Bus:0000:03
PM: Adding info for No Bus:0000:02
PM: Adding info for pci:0000:01:00.0
PM: Adding info for pci:0000:01:00.1
PM: Adding info for No Bus:0000:01
initcall acpi_pci_root_init+0x0/0x28() returned 0 after 216 msecs
calling acpi_pci_link_init+0x0/0x48()
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
initcall acpi_pci_link_init+0x0/0x48() returned 0 after 197 msecs
calling acpi_power_init+0x0/0x77()
initcall acpi_power_init+0x0/0x77() returned 0 after 0 msecs
calling acpi_system_init+0x0/0x1b0()
initcall acpi_system_init+0x0/0x1b0() returned 0 after 0 msecs
calling acpi_wmi_init+0x0/0x4f()
ACPI: WMI: Mapper loaded
initcall acpi_wmi_init+0x0/0x4f() returned 0 after 3 msecs
calling acpi_cm_sbs_init+0x0/0x8()
initcall acpi_cm_sbs_init+0x0/0x8() returned 0 after 0 msecs
calling pnp_init+0x0/0x20()
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall pnp_init+0x0/0x20() returned 0 after 3 msecs
calling pnpacpi_init+0x0/0x8c()
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
ACPI: bus type pnp registered
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
PM: Adding info for pnp:00:06
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
PM: Adding info for pnp:00:07
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
PM: Adding info for pnp:00:08
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
PM: Adding info for pnp:00:09
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
PM: Adding info for pnp:00:0a
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
PM: Adding info for pnp:00:0b
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
PM: Adding info for pnp:00:0e
PM: Adding info for pnp:00:0f
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c() returned 0 after 98 msecs
calling misc_init+0x0/0x98()
initcall misc_init+0x0/0x98() returned 0 after 0 msecs
calling cn_init+0x0/0xcb()
initcall cn_init+0x0/0xcb() returned 0 after 0 msecs
calling tifm_init+0x0/0x7c()
initcall tifm_init+0x0/0x7c() returned 0 after 0 msecs
calling phy_init+0x0/0x31()
initcall phy_init+0x0/0x31() returned 0 after 0 msecs
calling init_scsi+0x0/0x71()
SCSI subsystem initialized
initcall init_scsi+0x0/0x71() returned 0 after 3 msecs
calling ata_init+0x0/0x34b()
libata version 3.00 loaded.
initcall ata_init+0x0/0x34b() returned 0 after 0 msecs
calling spi_init+0x0/0x7c()
initcall spi_init+0x0/0x7c() returned 0 after 0 msecs
calling usb_init+0x0/0x127()
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x127() returned 0 after 9 msecs
calling serio_init+0x0/0x98()
initcall serio_init+0x0/0x98() returned 0 after 0 msecs
calling gameport_init+0x0/0x99()
initcall gameport_init+0x0/0x99() returned 0 after 0 msecs
calling input_init+0x0/0x107()
initcall input_init+0x0/0x107() returned 0 after 0 msecs
calling rtc_init+0x0/0x6b()
initcall rtc_init+0x0/0x6b() returned 0 after 0 msecs
calling hwmon_init+0x0/0x3b()
initcall hwmon_init+0x0/0x3b() returned 0 after 0 msecs
calling thermal_init+0x0/0x51()
initcall thermal_init+0x0/0x51() returned 0 after 0 msecs
calling mmc_init+0x0/0x74()
initcall mmc_init+0x0/0x74() returned 0 after 0 msecs
calling leds_init+0x0/0x2a()
initcall leds_init+0x0/0x2a() returned 0 after 0 msecs
calling dma_bus_init+0x0/0x2c()
initcall dma_bus_init+0x0/0x2c() returned 0 after 0 msecs
calling pci_acpi_init+0x0/0x96()
PCI: Using ACPI for IRQ routing
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 001 0 0 0 0 0 1 1 30
01 001 0 0 0 0 0 1 1 31
02 001 0 0 0 0 0 1 1 32
03 001 1 0 0 0 0 1 1 33
04 001 0 0 0 0 0 1 1 34
05 001 1 0 0 0 0 1 1 35
06 001 0 0 0 0 0 1 1 36
07 001 0 0 0 0 0 1 1 37
08 001 0 0 0 0 0 1 1 38
09 001 0 1 0 0 0 1 1 39
0a 001 0 0 0 0 0 1 1 3A
0b 001 1 0 0 0 0 1 1 3B
0c 001 0 0 0 0 0 1 1 3C
0d 001 0 0 0 0 0 1 1 3D
0e 001 0 0 0 0 0 1 1 3E
0f 001 0 0 0 0 0 1 1 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall pci_acpi_init+0x0/0x96() returned 0 after 155 msecs
calling pci_legacy_init+0x0/0x10c()
initcall pci_legacy_init+0x0/0x10c() returned 0 after 0 msecs
calling pcibios_irq_init+0x0/0x498()
initcall pcibios_irq_init+0x0/0x498() returned 0 after 0 msecs
calling pcibios_init+0x0/0x6a()
initcall pcibios_init+0x0/0x6a() returned 0 after 0 msecs
calling proto_init+0x0/0x2e()
initcall proto_init+0x0/0x2e() returned 0 after 0 msecs
calling net_dev_init+0x0/0x134()
initcall net_dev_init+0x0/0x134() returned 0 after 0 msecs
calling neigh_init+0x0/0x71()
initcall neigh_init+0x0/0x71() returned 0 after 0 msecs
calling genl_init+0x0/0xd5()
initcall genl_init+0x0/0xd5() returned 0 after 12 msecs
calling irda_init+0x0/0x82()
NET: Registered protocol family 23
initcall irda_init+0x0/0x82() returned 0 after 3 msecs
calling wireless_nlevent_init+0x0/0x41()
initcall wireless_nlevent_init+0x0/0x41() returned 0 after 0 msecs
calling cfg80211_init+0x0/0x5f()
initcall cfg80211_init+0x0/0x5f() returned 0 after 9 msecs
calling ieee80211_init+0x0/0x1f()
initcall ieee80211_init+0x0/0x1f() returned 0 after 0 msecs
calling rfkill_init+0x0/0x57()
initcall rfkill_init+0x0/0x57() returned 0 after 3 msecs
calling pci_iommu_init+0x0/0x17()
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x17() returned 0 after 12 msecs
calling hpet_late_init+0x0/0x4d()
initcall hpet_late_init+0x0/0x4d() returned -19 after 0 msecs
calling init_kmmio+0x0/0x2c()
initcall init_kmmio+0x0/0x2c() returned 0 after 0 msecs
calling clocksource_done_booting+0x0/0x12()
initcall clocksource_done_booting+0x0/0x12() returned 0 after 0 msecs
calling tracer_alloc_buffers+0x0/0x422()
tracer: 898 pages allocated for 65536<6> entries of 56 bytes
actual entries 65554
initcall tracer_alloc_buffers+0x0/0x422() returned 0 after 8 msecs
calling init_pipe_fs+0x0/0x4c()
initcall init_pipe_fs+0x0/0x4c() returned 0 after 0 msecs
calling init_mnt_writers+0x0/0x49()
initcall init_mnt_writers+0x0/0x49() returned 0 after 0 msecs
calling eventpoll_init+0x0/0x95()
initcall eventpoll_init+0x0/0x95() returned 0 after 0 msecs
calling anon_inode_init+0x0/0x115()
initcall anon_inode_init+0x0/0x115() returned 0 after 0 msecs
calling acpi_rtc_init+0x0/0xd1()
ACPI: RTC can wake from S4
initcall acpi_rtc_init+0x0/0xd1() returned 0 after 2 msecs
calling acpi_event_init+0x0/0x52()
initcall acpi_event_init+0x0/0x52() returned 0 after 12 msecs
calling pnp_system_init+0x0/0x12()
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0f: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0f: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
system 00:0f: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:0f: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0x100000-0x3ffeffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0f: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0f: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0f: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0f: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0f: iomem range 0xfffed000-0xfffeffff could not be reserved
initcall pnp_system_init+0x0/0x12() returned 0 after 130 msecs
calling chr_dev_init+0x0/0xa7()
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:kmem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:port
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
PM: Adding info for No Bus:oldmem
initcall chr_dev_init+0x0/0xa7() returned 0 after 29 msecs
calling firmware_class_init+0x0/0x72()
initcall firmware_class_init+0x0/0x72() returned 0 after 0 msecs
calling loopback_init+0x0/0x12()
PM: Adding info for No Bus:lo
initcall loopback_init+0x0/0x12() returned 0 after 2 msecs
calling cpufreq_gov_performance_init+0x0/0x12()
initcall cpufreq_gov_performance_init+0x0/0x12() returned 0 after 0 msecs
calling cpufreq_gov_dbs_init+0x0/0x4b()
initcall cpufreq_gov_dbs_init+0x0/0x4b() returned 0 after 0 msecs
calling ssb_modinit+0x0/0x61()
initcall ssb_modinit+0x0/0x61() returned 0 after 0 msecs
calling pcibios_assign_resources+0x0/0x88()
PCI: Bridge: 0000:00:09.0
IO window: c000-cfff
MEM window: 0xda000000-0xda0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: b000-bfff
MEM window: 0xd8000000-0xd9ffffff
PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
initcall pcibios_assign_resources+0x0/0x88() returned 0 after 72 msecs
calling inet_init+0x0/0x2fb()
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x2fb() returned 0 after 71 msecs
calling af_unix_init+0x0/0x55()
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55() returned 0 after 2 msecs
calling default_rootfs+0x0/0x6b()
initcall default_rootfs+0x0/0x6b() returned 0 after 0 msecs
calling calgary_fixup_tce_spaces+0x0/0xf3()
initcall calgary_fixup_tce_spaces+0x0/0xf3() returned -19 after 0 msecs
calling i8259A_init_sysfs+0x0/0x22()
initcall i8259A_init_sysfs+0x0/0x22() returned 0 after 0 msecs
calling vsyscall_init+0x0/0x50()
initcall vsyscall_init+0x0/0x50() returned 0 after 0 msecs
calling sbf_init+0x0/0xd5()
initcall sbf_init+0x0/0xd5() returned 0 after 0 msecs
calling i8237A_init_sysfs+0x0/0x22()
initcall i8237A_init_sysfs+0x0/0x22() returned 0 after 0 msecs
calling cache_sysfs_init+0x0/0x21f()
initcall cache_sysfs_init+0x0/0x21f() returned 0 after 0 msecs
calling mce_init_device+0x0/0x10b()
PM: Adding info for No Bus:mcelog
initcall mce_init_device+0x0/0x10b() returned 0 after 3 msecs
calling periodic_mcheck_init+0x0/0x3f()
initcall periodic_mcheck_init+0x0/0x3f() returned 0 after 0 msecs
calling thermal_throttle_init_device+0x0/0x28()
initcall thermal_throttle_init_device+0x0/0x28() returned 0 after 0 msecs
calling threshold_init_device+0x0/0xf3()
initcall threshold_init_device+0x0/0xf3() returned 0 after 0 msecs
calling cpuid_init+0x0/0xb9()
PM: Adding info for No Bus:cpu0
initcall cpuid_init+0x0/0xb9() returned 0 after 3 msecs
calling init_lapic_sysfs+0x0/0x2d()
initcall init_lapic_sysfs+0x0/0x2d() returned 0 after 0 msecs
calling ioapic_init_sysfs+0x0/0x99()
initcall ioapic_init_sysfs+0x0/0x99() returned 0 after 0 msecs
calling add_pcspkr+0x0/0x43()
PM: Adding info for platform:pcspkr
initcall add_pcspkr+0x0/0x43() returned 0 after 3 msecs
calling debug_pagealloc_proc_init+0x0/0x2b()
initcall debug_pagealloc_proc_init+0x0/0x2b() returned 0 after 0 msecs
calling init+0x0/0x12()
initcall init+0x0/0x12() returned 0 after 0 msecs
calling init_vdso_vars+0x0/0x1f8()
initcall init_vdso_vars+0x0/0x1f8() returned 0 after 0 msecs
calling sysenter_setup+0x0/0x26a()
initcall sysenter_setup+0x0/0x26a() returned 0 after 0 msecs
calling init_aout_binfmt+0x0/0x12()
initcall init_aout_binfmt+0x0/0x12() returned 0 after 0 msecs
calling init_sched_debug_procfs+0x0/0x2c()
initcall init_sched_debug_procfs+0x0/0x2c()<4>Clocksource tsc unstable (delta = 76534833 ns)
returned 0 after 0 msecs
calling create_proc_profile+0x0/0x48()
initcall create_proc_profile+0x0/0x48() returned 0 after 0 msecs
calling ioresources_init+0x0/0x3c()
initcall ioresources_init+0x0/0x3c() returned 0 after 0 msecs
calling uid_cache_init+0x0/0x6c()
initcall uid_cache_init+0x0/0x6c() returned 0 after 0 msecs
calling init_posix_timers+0x0/0xb6()
initcall init_posix_timers+0x0/0xb6() returned 0 after 0 msecs
calling init_posix_cpu_timers+0x0/0xd4()
initcall init_posix_cpu_timers+0x0/0xd4() returned 0 after 0 msecs
calling nsproxy_cache_init+0x0/0x2d()
initcall nsproxy_cache_init+0x0/0x2d() returned 0 after 0 msecs
calling timekeeping_init_device+0x0/0x22()
initcall timekeeping_init_device+0x0/0x22() returned 0 after 0 msecs
calling init_clocksource_sysfs+0x0/0x50()
initcall init_clocksource_sysfs+0x0/0x50() returned 0 after 0 msecs
calling init_timer_list_procfs+0x0/0x2c()
initcall init_timer_list_procfs+0x0/0x2c() returned 0 after 0 msecs
calling lockdep_proc_init+0x0/0x42()
initcall lockdep_proc_init+0x0/0x42() returned 0 after 0 msecs
calling futex_init+0x0/0x93()
initcall futex_init+0x0/0x93() returned 0 after 0 msecs
calling init_rttest+0x0/0x15f()
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x15f() returned 0 after 3 msecs
calling proc_dma_init+0x0/0x22()
initcall proc_dma_init+0x0/0x22() returned 0 after 0 msecs
calling kallsyms_init+0x0/0x25()
initcall kallsyms_init+0x0/0x25() returned 0 after 0 msecs
calling snapshot_device_init+0x0/0x12()
PM: Adding info for No Bus:snapshot
initcall snapshot_device_init+0x0/0x12() returned 0 after 3 msecs
calling backtrace_regression_test+0x0/0x7f()
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper Not tainted 2.6.26-rc1-sched-devel.git-x86-latest.git #76
Call Trace:
[<ffffffff80253494>] backtrace_regression_test+0x33/0x7f
[<ffffffff80c0788e>] kernel_init+0xa1/0x1de
[<ffffffff80826994>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8024894c>] ? trace_hardirqs_on_caller+0xc3/0xed
[<ffffffff8020bff8>] child_rip+0xa/0x12
[<ffffffff8020ba8c>] ? restore_args+0x0/0x30
[<ffffffff80c077ed>] ? kernel_init+0x0/0x1de
[<ffffffff8020bfee>] ? child_rip+0x0/0x12
====[ end of backtrace testing ]====
initcall backtrace_regression_test+0x0/0x7f() returned 0 after 50 msecs
calling init_lstats_procfs+0x0/0x25()
initcall init_lstats_procfs+0x0/0x25() returned 0 after 0 msecs
calling init_sched_switch_trace+0x0/0x41()
Testing tracer sched_switch: Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper Not tainted 2.6.26-rc1-sched-devel.git-x86-latest.git #76
Call Trace:
<IRQ> [<ffffffff80248983>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8025345f>] backtrace_test_timer+0x25/0x27
[<ffffffff80234d06>] run_timer_softirq+0x157/0x1c0
[<ffffffff80232ab7>] __do_softirq+0x86/0x113
[<ffffffff8020c3bc>] call_softirq+0x1c/0x28
[<ffffffff8020e018>] do_softirq+0x49/0x9b
[<ffffffff802329f5>] irq_exit+0x4e/0x8a
[<ffffffff802188f7>] smp_apic_timer_interrupt+0x72/0x7d
[<ffffffff8022e3cd>] ? release_console_sem+0x1b5/0x1cd
[<ffffffff8020bdc7>] apic_timer_interrupt+0x77/0x80
<EOI> [<ffffffff80241dbe>] ? up+0xf/0x39
[<ffffffff8022e3cd>] ? release_console_sem+0x1b5/0x1cd
[<ffffffff8022e8df>] ? vprintk+0x327/0x342
[<ffffffff8022e8df>] ? vprintk+0x327/0x342
[<ffffffff8022e98b>] ? printk+0x91/0x9d
[<ffffffff80249979>] ? __lock_acquire+0xb65/0xb86
[<ffffffff8022e98b>] ? printk+0x91/0x9d
[<ffffffff80248983>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff808257d3>] ? mutex_lock_nested+0x1ea/0x1f9
[<ffffffff80241dbe>] ? up+0xf/0x39
[<ffffffff8025a3e8>] ? head_page+0xd/0x4c
[<ffffffff8025b2f2>] ? register_tracer+0xd2/0x188
[<ffffffff80c13d3f>] ? init_sched_switch_trace+0x39/0x41
[<ffffffff80c0788e>] ? kernel_init+0xa1/0x1de
[<ffffffff80826994>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8024894c>] ? trace_hardirqs_on_caller+0xc3/0xed
[<ffffffff8020bff8>] ? child_rip+0xa/0x12
[<ffffffff8020ba8c>] ? restore_args+0x0/0x30
[<ffffffff80c077ed>] ? kernel_init+0x0/0x1de
[<ffffffff8020bfee>] ? child_rip+0x0/0x12
PASSED
initcall init_sched_switch_trace+0x0/0x41() returned 0 after 235 msecs
calling init_stack_trace+0x0/0x12()
Testing tracer sysprof: PASSED
initcall init_stack_trace+0x0/0x12() returned 0 after 98 msecs
calling init_mmio_trace+0x0/0x12()
initcall init_mmio_trace+0x0/0x12() returned 0 after 0 msecs
calling init_per_zone_pages_min+0x0/0x45()
initcall init_per_zone_pages_min+0x0/0x45() returned 0 after 0 msecs
calling pdflush_init+0x0/0x1d()
initcall pdflush_init+0x0/0x1d() returned 0 after 0 msecs
calling kswapd_init+0x0/0x14()
initcall kswapd_init+0x0/0x14() returned 0 after 0 msecs
calling procswaps_init+0x0/0x22()
initcall procswaps_init+0x0/0x22() returned 0 after 0 msecs
calling init_tmpfs+0x0/0xda()
initcall init_tmpfs+0x0/0xda() returned 0 after 0 msecs
calling cpucache_init+0x0/0xf()
initcall cpucache_init+0x0/0xf() returned 0 after 0 msecs
calling fasync_init+0x0/0x2a()
initcall fasync_init+0x0/0x2a() returned 0 after 0 msecs
calling aio_setup+0x0/0x73()
initcall aio_setup+0x0/0x73() returned 0 after 0 msecs
calling inotify_setup+0x0/0x12()
initcall inotify_setup+0x0/0x12() returned 0 after 0 msecs
calling init_sys32_ioctl+0x0/0x85()
initcall init_sys32_ioctl+0x0/0x85() returned 0 after 0 msecs
calling init_mbcache+0x0/0x14()
initcall init_mbcache+0x0/0x14() returned 0 after 0 msecs
calling dquot_init+0x0/0xde()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xde() returned 0 after 6 msecs
calling init_v2_quota_format+0x0/0x12()
initcall init_v2_quota_format+0x0/0x12() returned 0 after 0 msecs
calling configfs_init+0x0/0xb3()
initcall configfs_init+0x0/0xb3() returned 0 after 0 msecs
calling init_devpts_fs+0x0/0x3f()
initcall init_devpts_fs+0x0/0x3f() returned 0 after 0 msecs
calling init_dlm+0x0/0x88()
PM: Adding info for No Bus:dlm-control
PM: Adding info for No Bus:dlm_plock
DLM (built May 7 2008 16:17:51) installed
initcall init_dlm+0x0/0x88() returned 0 after 9 msecs
calling init_ext3_fs+0x0/0x6a()
initcall init_ext3_fs+0x0/0x6a() returned 0 after 0 msecs
calling journal_init+0x0/0xc1()
initcall journal_init+0x0/0xc1() returned 0 after 0 msecs
calling init_ramfs_fs+0x0/0x12()
initcall init_ramfs_fs+0x0/0x12() returned 0 after 0 msecs
calling init_coda+0x0/0x133()
PM: Adding info for No Bus:cfs0
PM: Adding info for No Bus:cfs1
PM: Adding info for No Bus:cfs2
PM: Adding info for No Bus:cfs3
PM: Adding info for No Bus:cfs4
initcall init_coda+0x0/0x133() returned 0 after 15 msecs
calling init_minix_fs+0x0/0x5a()
initcall init_minix_fs+0x0/0x5a() returned 0 after 0 msecs
calling init_fat_fs+0x0/0x4f()
initcall init_fat_fs+0x0/0x4f() returned 0 after 0 msecs
calling init_msdos_fs+0x0/0x12()
initcall init_msdos_fs+0x0/0x12() returned 0 after 0 msecs
calling init_vfat_fs+0x0/0x12()
initcall init_vfat_fs+0x0/0x12() returned 0 after 0 msecs
calling init_iso9660_fs+0x0/0x5a()
initcall init_iso9660_fs+0x0/0x5a() returned 0 after 0 msecs
calling init_hfsplus_fs+0x0/0x5d()
initcall init_hfsplus_fs+0x0/0x5d() returned 0 after 0 msecs
calling init_hfs_fs+0x0/0x5d()
initcall init_hfs_fs+0x0/0x5d() returned 0 after 0 msecs
calling ecryptfs_init+0x0/0x1c5()
PM: Adding info for No Bus:ecryptfs
initcall ecryptfs_init+0x0/0x1c5() returned 0 after 3 msecs
calling vxfs_init+0x0/0x59()
initcall vxfs_init+0x0/0x59() returned 0 after 0 msecs
calling init_nfs_fs+0x0/0xfc()
initcall init_nfs_fs+0x0/0xfc() returned 0 after 3 msecs
calling init_nlm+0x0/0x8()
initcall init_nlm+0x0/0x8() returned 0 after 0 msecs
calling init_nls_cp737+0x0/0x12()
initcall init_nls_cp737+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp857+0x0/0x12()
initcall init_nls_cp857+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp861+0x0/0x12()
initcall init_nls_cp861+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp862+0x0/0x12()
initcall init_nls_cp862+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp864+0x0/0x12()
initcall init_nls_cp864+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp932+0x0/0x12()
initcall init_nls_cp932+0x0/0x12() returned 0 after 0 msecs
calling init_nls_euc_jp+0x0/0x48()
initcall init_nls_euc_jp+0x0/0x48() returned 0 after 0 msecs
calling init_nls_cp936+0x0/0x12()
initcall init_nls_cp936+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp949+0x0/0x12()
initcall init_nls_cp949+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp950+0x0/0x12()
initcall init_nls_cp950+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp1251+0x0/0x12()
initcall init_nls_cp1251+0x0/0x12() returned 0 after 0 msecs
calling init_nls_iso8859_1+0x0/0x12()
initcall init_nls_iso8859_1+0x0/0x12() returned 0 after 0 msecs
calling init_nls_iso8859_2+0x0/0x12()
initcall init_nls_iso8859_2+0x0/0x12() returned 0 after 0 msecs
calling init_nls_iso8859_3+0x0/0x12()
initcall init_nls_iso8859_3+0x0/0x12() returned 0 after 0 msecs
calling init_nls_iso8859_5+0x0/0x12()
initcall init_nls_iso8859_5+0x0/0x12() returned 0 after 0 msecs
calling init_nls_iso8859_6+0x0/0x12()
initcall init_nls_iso8859_6+0x0/0x12() returned 0 after 0 msecs
calling init_nls_cp1255+0x0/0x12()
initcall init_nls_cp1255+0x0/0x12() returned 0 after 0 msecs
calling init_nls_iso8859_15+0x0/0x12()
initcall init_nls_iso8859_15+0x0/0x12() returned 0 after 0 msecs
calling init_nls_koi8_r+0x0/0x12()
initcall init_nls_koi8_r+0x0/0x12() returned 0 after 0 msecs
calling init_nls_koi8_u+0x0/0x12()
initcall init_nls_koi8_u+0x0/0x12() returned 0 after 0 msecs
calling init_nls_koi8_ru+0x0/0x48()
initcall init_nls_koi8_ru+0x0/0x48() returned 0 after 0 msecs
calling init_nls_utf8+0x0/0x25()
initcall init_nls_utf8+0x0/0x25() returned 0 after 0 msecs
calling init_ncp_fs+0x0/0x5a()
initcall init_ncp_fs+0x0/0x5a() returned 0 after 0 msecs
calling init_hpfs_fs+0x0/0x5a()
initcall init_hpfs_fs+0x0/0x5a() returned 0 after 0 msecs
calling init_ntfs_fs+0x0/0x1d1()
NTFS driver 2.1.29 [Flags: R/W].
initcall init_ntfs_fs+0x0/0x1d1() returned 0 after 3 msecs
calling init_affs_fs+0x0/0x5a()
initcall init_affs_fs+0x0/0x5a() returned 0 after 0 msecs
calling init_romfs_fs+0x0/0x5a()
initcall init_romfs_fs+0x0/0x5a() returned 0 after 0 msecs
calling init_qnx4_fs+0x0/0x6c()
QNX4 filesystem 0.2.3 registered.
initcall init_qnx4_fs+0x0/0x6c() returned 0 after 3 msecs
calling init_autofs_fs+0x0/0x12()
initcall init_autofs_fs+0x0/0x12() returned 0 after 0 msecs
calling init_autofs4_fs+0x0/0x12()
initcall init_autofs4_fs+0x0/0x12() returned -16 after 0 msecs
initcall init_autofs4_fs+0x0/0x12() returned with error code -16
calling init_udf_fs+0x0/0x5b()
initcall init_udf_fs+0x0/0x5b() returned 0 after 0 msecs
calling init_jfs_fs+0x0/0x264()
JFS: nTxBlock = 7223, nTxLock = 57789
initcall init_jfs_fs+0x0/0x264() returned 0 after 9 msecs
calling init_v9fs+0x0/0x20()
Installing v9fs 9p2000 file system support
initcall init_v9fs+0x0/0x20() returned 0 after 3 msecs
calling init_befs_fs+0x0/0x7b()
BeFS version: 0.9.3
initcall init_befs_fs+0x0/0x7b() returned 0 after 0 msecs
calling ipc_init+0x0/0x23()
msgmni has been set to 1805 for ipc namespace ffffffff80b33740
initcall ipc_init+0x0/0x23() returned 0 after 3 msecs
calling init_mqueue_fs+0x0/0xd7()
initcall init_mqueue_fs+0x0/0xd7() returned 0 after 0 msecs
calling key_proc_init+0x0/0x59()
initcall key_proc_init+0x0/0x59() returned 0 after 0 msecs
calling crypto_algapi_init+0x0/0xd()
initcall crypto_algapi_init+0x0/0xd() returned 0 after 0 msecs
calling blkcipher_module_init+0x0/0x2a()
initcall blkcipher_module_init+0x0/0x2a() returned 0 after 0 msecs
calling seqiv_module_init+0x0/0x12()
initcall seqiv_module_init+0x0/0x12() returned 0 after 0 msecs
calling cryptomgr_init+0x0/0x12()
initcall cryptomgr_init+0x0/0x12() returned 0 after 0 msecs
calling hmac_module_init+0x0/0x12()
initcall hmac_module_init+0x0/0x12() returned 0 after 0 msecs
calling crypto_null_mod_init+0x0/0x7b()
initcall crypto_null_mod_init+0x0/0x7b() returned 0 after 0 msecs
calling md4_mod_init+0x0/0x12()
initcall md4_mod_init+0x0/0x12() returned 0 after 0 msecs
calling md5_mod_init+0x0/0x12()
initcall md5_mod_init+0x0/0x12() returned 0 after 0 msecs
calling sha1_generic_mod_init+0x0/0x12()
initcall sha1_generic_mod_init+0x0/0x12() returned 0 after 0 msecs
calling sha256_generic_mod_init+0x0/0x3f()
initcall sha256_generic_mod_init+0x0/0x3f() returned 0 after 0 msecs
calling wp512_mod_init+0x0/0x64()
initcall wp512_mod_init+0x0/0x64() returned 0 after 0 msecs
calling crypto_ecb_module_init+0x0/0x12()
initcall crypto_ecb_module_init+0x0/0x12() returned 0 after 0 msecs
calling crypto_cbc_module_init+0x0/0x12()
initcall crypto_cbc_module_init+0x0/0x12() returned 0 after 0 msecs
calling crypto_module_init+0x0/0x12()
initcall crypto_module_init+0x0/0x12() returned 0 after 0 msecs
calling crypto_ctr_module_init+0x0/0x3f()
initcall crypto_ctr_module_init+0x0/0x3f() returned 0 after 0 msecs
calling crypto_gcm_module_init+0x0/0x5d()
initcall crypto_gcm_module_init+0x0/0x5d() returned 0 after 0 msecs
calling des_generic_mod_init+0x0/0x3f()
initcall des_generic_mod_init+0x0/0x3f() returned 0 after 0 msecs
calling blowfish_mod_init+0x0/0x12()
initcall blowfish_mod_init+0x0/0x12() returned 0 after 0 msecs
calling aes_init+0x0/0x2ce()
initcall aes_init+0x0/0x2ce() returned 0 after 0 msecs
calling cast5_mod_init+0x0/0x12()
initcall cast5_mod_init+0x0/0x12() returned 0 after 0 msecs
calling arc4_init+0x0/0x12()
initcall arc4_init+0x0/0x12() returned 0 after 0 msecs
calling tea_mod_init+0x0/0x64()
initcall tea_mod_init+0x0/0x64() returned 0 after 0 msecs
calling anubis_mod_init+0x0/0x12()
initcall anubis_mod_init+0x0/0x12() returned 0 after 0 msecs
calling salsa20_generic_mod_init+0x0/0x12()
initcall salsa20_generic_mod_init+0x0/0x12() returned 0 after 0 msecs
calling deflate_mod_init+0x0/0x12()
initcall deflate_mod_init+0x0/0x12() returned 0 after 0 msecs
calling michael_mic_init+0x0/0x12()
initcall michael_mic_init+0x0/0x12() returned 0 after 0 msecs
calling crc32c_mod_init+0x0/0x12()
initcall crc32c_mod_init+0x0/0x12() returned 0 after 0 msecs
calling crypto_authenc_module_init+0x0/0x12()
initcall crypto_authenc_module_init+0x0/0x12() returned 0 after 0 msecs
calling lzo_mod_init+0x0/0x12()
initcall lzo_mod_init+0x0/0x12() returned 0 after 0 msecs
calling noop_init+0x0/0x14()
io scheduler noop registered (default)
initcall noop_init+0x0/0x14() returned 0 after 3 msecs
calling debug_objects_init_debugfs+0x0/0x64()
initcall debug_objects_init_debugfs+0x0/0x64() returned 0 after 0 msecs
calling init_kmp+0x0/0x12()
initcall init_kmp+0x0/0x12() returned 0 after 0 msecs
calling init_bm+0x0/0x12()
initcall init_bm+0x0/0x12() returned 0 after 0 msecs
calling init_fsm+0x0/0x12()
initcall init_fsm+0x0/0x12() returned 0 after 0 msecs
calling pci_init+0x0/0x35()
pci 0000:01:00.0: Boot video device
initcall pci_init+0x0/0x35() returned 0 after 12 msecs
calling pci_proc_init+0x0/0x6a()
initcall pci_proc_init+0x0/0x6a() returned 0 after 0 msecs
calling pcie_portdrv_init+0x0/0x4d()
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PM: Adding info for pci_express:0000:00:0b.0:pcie00
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PM: Adding info for pci_express:0000:00:0c.0:pcie00
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PM: Adding info for pci_express:0000:00:0d.0:pcie00
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PM: Adding info for pci_express:0000:00:0e.0:pcie00
initcall pcie_portdrv_init+0x0/0x4d() returned 0 after 54 msecs
calling ltv350qv_init+0x0/0x12()
initcall ltv350qv_init+0x0/0x12() returned 0 after 0 msecs
calling display_class_init+0x0/0x80()
initcall display_class_init+0x0/0x80() returned 0 after 0 msecs
calling acpi_reserve_resources+0x0/0xeb()
initcall acpi_reserve_resources+0x0/0xeb() returned 0 after 0 msecs
calling acpi_battery_init+0x0/0x45()
initcall acpi_battery_init+0x0/0x45() returned 0 after 0 msecs
calling acpi_button_init+0x0/0x5e()
PM: Adding info for No Bus:input0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
PM: Adding info for No Bus:input1
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
initcall acpi_button_init+0x0/0x5e() returned 0 after 19 msecs
calling irqrouter_init_sysfs+0x0/0x38()
initcall irqrouter_init_sysfs+0x0/0x38() returned 0 after 0 msecs
calling acpi_processor_init+0x0/0x8b()
PM: Adding info for No Bus:cooling_device0
ACPI: ACPI0007:00 is registered as cooling_device0
initcall acpi_processor_init+0x0/0x8b() returned 0 after 6 msecs
calling acpi_thermal_init+0x0/0x77()
PM: Adding info for No Bus:thermal_zone0
PM: Adding info for No Bus:hwmon0
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
initcall acpi_thermal_init+0x0/0x77() returned 0 after 12 msecs
calling rand_initialize+0x0/0x2c()
initcall rand_initialize+0x0/0x2c() returned 0 after 0 msecs
calling tty_init+0x0/0x1c5()
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
initcall tty_init+0x0/0x1c5() returned 0 after 222 msecs
calling pty_init+0x0/0x275()
initcall pty_init+0x0/0x275() returned 0 after 0 msecs
calling cy_init+0x0/0x126()
Cyclades driver 2.5 (built May 7 2008 16:17:48)
initcall cy_init+0x0/0x126() returned 0 after 6 msecs
calling specialix_init_module+0x0/0x40f()
sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
sx: derived from work (c) D.Gorodchanin 1994-1996.
sx: DTR/RTS pin is always RTS.
PM: Adding info for No Bus:ttyW0
PM: Adding info for No Bus:ttyW1
PM: Adding info for No Bus:ttyW2
PM: Adding info for No Bus:ttyW3
PM: Adding info for No Bus:ttyW4
PM: Adding info for No Bus:ttyW5
PM: Adding info for No Bus:ttyW6
PM: Adding info for No Bus:ttyW7
PM: Adding info for No Bus:ttyW8
PM: Adding info for No Bus:ttyW9
PM: Adding info for No Bus:ttyW10
PM: Adding info for No Bus:ttyW11
PM: Adding info for No Bus:ttyW12
PM: Adding info for No Bus:ttyW13
PM: Adding info for No Bus:ttyW14
PM: Adding info for No Bus:ttyW15
PM: Adding info for No Bus:ttyW16
PM: Adding info for No Bus:ttyW17
PM: Adding info for No Bus:ttyW18
PM: Adding info for No Bus:ttyW19
PM: Adding info for No Bus:ttyW20
PM: Adding info for No Bus:ttyW21
PM: Adding info for No Bus:ttyW22
PM: Adding info for No Bus:ttyW23
PM: Adding info for No Bus:ttyW24
PM: Adding info for No Bus:ttyW25
PM: Adding info for No Bus:ttyW26
PM: Adding info for No Bus:ttyW27
PM: Adding info for No Bus:ttyW28
PM: Adding info for No Bus:ttyW29
PM: Adding info for No Bus:ttyW30
PM: Adding info for No Bus:ttyW31
PM: Adding info for No Bus:ttyW32
PM: Adding info for No Bus:ttyW33
PM: Adding info for No Bus:ttyW34
PM: Adding info for No Bus:ttyW35
PM: Adding info for No Bus:ttyW36
PM: Adding info for No Bus:ttyW37
PM: Adding info for No Bus:ttyW38
PM: Adding info for No Bus:ttyW39
PM: Adding info for No Bus:ttyW40
PM: Adding info for No Bus:ttyW41
PM: Adding info for No Bus:ttyW42
PM: Adding info for No Bus:ttyW43
PM: Adding info for No Bus:ttyW44
PM: Adding info for No Bus:ttyW45
PM: Adding info for No Bus:ttyW46
PM: Adding info for No Bus:ttyW47
PM: Adding info for No Bus:ttyW48
PM: Adding info for No Bus:ttyW49
PM: Adding info for No Bus:ttyW50
PM: Adding info for No Bus:ttyW51
PM: Adding info for No Bus:ttyW52
PM: Adding info for No Bus:ttyW53
PM: Adding info for No Bus:ttyW54
PM: Adding info for No Bus:ttyW55
PM: Adding info for No Bus:ttyW56
PM: Adding info for No Bus:ttyW57
PM: Adding info for No Bus:ttyW58
PM: Adding info for No Bus:ttyW59
PM: Adding info for No Bus:ttyW60
PM: Adding info for No Bus:ttyW61
PM: Adding info for No Bus:ttyW62
PM: Adding info for No Bus:ttyW63
sx0: specialix IO8+ Board at 0x100 not found.
sx1: specialix IO8+ Board at 0x180 not found.
sx2: specialix IO8+ Board at 0x250 not found.
sx3: specialix IO8+ Board at 0x260 not found.
PM: Removing info for No Bus:ttyW0
PM: Removing info for No Bus:ttyW1
PM: Removing info for No Bus:ttyW2
PM: Removing info for No Bus:ttyW3
PM: Removing info for No Bus:ttyW4
PM: Removing info for No Bus:ttyW5
PM: Removing info for No Bus:ttyW6
PM: Removing info for No Bus:ttyW7
PM: Removing info for No Bus:ttyW8
PM: Removing info for No Bus:ttyW9
PM: Removing info for No Bus:ttyW10
PM: Removing info for No Bus:ttyW11
PM: Removing info for No Bus:ttyW12
PM: Removing info for No Bus:ttyW13
PM: Removing info for No Bus:ttyW14
PM: Removing info for No Bus:ttyW15
PM: Removing info for No Bus:ttyW16
PM: Removing info for No Bus:ttyW17
PM: Removing info for No Bus:ttyW18
PM: Removing info for No Bus:ttyW19
PM: Removing info for No Bus:ttyW20
PM: Removing info for No Bus:ttyW21
PM: Removing info for No Bus:ttyW22
PM: Removing info for No Bus:ttyW23
PM: Removing info for No Bus:ttyW24
PM: Removing info for No Bus:ttyW25
PM: Removing info for No Bus:ttyW26
PM: Removing info for No Bus:ttyW27
PM: Removing info for No Bus:ttyW28
PM: Removing info for No Bus:ttyW29
PM: Removing info for No Bus:ttyW30
PM: Removing info for No Bus:ttyW31
PM: Removing info for No Bus:ttyW32
PM: Removing info for No Bus:ttyW33
PM: Removing info for No Bus:ttyW34
PM: Removing info for No Bus:ttyW35
PM: Removing info for No Bus:ttyW36
PM: Removing info for No Bus:ttyW37
PM: Removing info for No Bus:ttyW38
PM: Removing info for No Bus:ttyW39
PM: Removing info for No Bus:ttyW40
PM: Removing info for No Bus:ttyW41
PM: Removing info for No Bus:ttyW42
PM: Removing info for No Bus:ttyW43
PM: Removing info for No Bus:ttyW44
PM: Removing info for No Bus:ttyW45
PM: Removing info for No Bus:ttyW46
PM: Removing info for No Bus:ttyW47
PM: Removing info for No Bus:ttyW48
PM: Removing info for No Bus:ttyW49
PM: Removing info for No Bus:ttyW50
PM: Removing info for No Bus:ttyW51
PM: Removing info for No Bus:ttyW52
PM: Removing info for No Bus:ttyW53
PM: Removing info for No Bus:ttyW54
PM: Removing info for No Bus:ttyW55
PM: Removing info for No Bus:ttyW56
PM: Removing info for No Bus:ttyW57
PM: Removing info for No Bus:ttyW58
PM: Removing info for No Bus:ttyW59
PM: Removing info for No Bus:ttyW60
PM: Removing info for No Bus:ttyW61
PM: Removing info for No Bus:ttyW62
PM: Removing info for No Bus:ttyW63
sx: No specialix IO8+ boards detected.
initcall specialix_init_module+0x0/0x40f() returned -5 after 425 msecs
initcall specialix_init_module+0x0/0x40f() returned with error code -5
calling mxser_module_init+0x0/0x62f()
MOXA Smartio/Industio family driver version 2.0.3
initcall mxser_module_init+0x0/0x62f() returned 0 after 3 msecs
calling riscom8_init_module+0x0/0x3de()
rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
PM: Adding info for No Bus:ttyL0
PM: Adding info for No Bus:ttyL1
PM: Adding info for No Bus:ttyL2
PM: Adding info for No Bus:ttyL3
PM: Adding info for No Bus:ttyL4
PM: Adding info for No Bus:ttyL5
PM: Adding info for No Bus:ttyL6
PM: Adding info for No Bus:ttyL7
PM: Adding info for No Bus:ttyL8
PM: Adding info for No Bus:ttyL9
PM: Adding info for No Bus:ttyL10
PM: Adding info for No Bus:ttyL11
PM: Adding info for No Bus:ttyL12
PM: Adding info for No Bus:ttyL13
PM: Adding info for No Bus:ttyL14
PM: Adding info for No Bus:ttyL15
PM: Adding info for No Bus:ttyL16
PM: Adding info for No Bus:ttyL17
PM: Adding info for No Bus:ttyL18
PM: Adding info for No Bus:ttyL19
PM: Adding info for No Bus:ttyL20
PM: Adding info for No Bus:ttyL21
PM: Adding info for No Bus:ttyL22
PM: Adding info for No Bus:ttyL23
PM: Adding info for No Bus:ttyL24
PM: Adding info for No Bus:ttyL25
PM: Adding info for No Bus:ttyL26
PM: Adding info for No Bus:ttyL27
PM: Adding info for No Bus:ttyL28
PM: Adding info for No Bus:ttyL29
PM: Adding info for No Bus:ttyL30
PM: Adding info for No Bus:ttyL31
rc0: RISCom/8 Board at 0x220 not found.
rc1: RISCom/8 Board at 0x240 not found.
rc2: RISCom/8 Board at 0x250 not found.
rc3: RISCom/8 Board at 0x260 not found.
PM: Removing info for No Bus:ttyL0
PM: Removing info for No Bus:ttyL1
PM: Removing info for No Bus:ttyL2
PM: Removing info for No Bus:ttyL3
PM: Removing info for No Bus:ttyL4
PM: Removing info for No Bus:ttyL5
PM: Removing info for No Bus:ttyL6
PM: Removing info for No Bus:ttyL7
PM: Removing info for No Bus:ttyL8
PM: Removing info for No Bus:ttyL9
PM: Removing info for No Bus:ttyL10
PM: Removing info for No Bus:ttyL11
PM: Removing info for No Bus:ttyL12
PM: Removing info for No Bus:ttyL13
PM: Removing info for No Bus:ttyL14
PM: Removing info for No Bus:ttyL15
PM: Removing info for No Bus:ttyL16
PM: Removing info for No Bus:ttyL17
PM: Removing info for No Bus:ttyL18
PM: Removing info for No Bus:ttyL19
PM: Removing info for No Bus:ttyL20
PM: Removing info for No Bus:ttyL21
PM: Removing info for No Bus:ttyL22
PM: Removing info for No Bus:ttyL23
PM: Removing info for No Bus:ttyL24
PM: Removing info for No Bus:ttyL25
PM: Removing info for No Bus:ttyL26
PM: Removing info for No Bus:ttyL27
PM: Removing info for No Bus:ttyL28
PM: Removing info for No Bus:ttyL29
PM: Removing info for No Bus:ttyL30
PM: Removing info for No Bus:ttyL31
rc: No RISCom/8 boards detected.
initcall riscom8_init_module+0x0/0x3de() returned -5 after 216 msecs
initcall riscom8_init_module+0x0/0x3de() returned with error code -5
calling n_hdlc_init+0x0/0x94()
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
initcall n_hdlc_init+0x0/0x94() returned 0 after 3 msecs
calling sx_init+0x0/0xe6()
PM: Adding info for No Bus:sxctl
initcall sx_init+0x0/0xe6() returned 0 after 3 msecs
calling rio_init+0x0/0xefa()
PM: Adding info for No Bus:rioctl
PM: Removing info for No Bus:rioctl
initcall rio_init+0x0/0xefa() returned -5 after 9 msecs
initcall rio_init+0x0/0xefa() returned with error code -5
calling raw_init+0x0/0xd4()
PM: Adding info for No Bus:rawctl
initcall raw_init+0x0/0xd4() returned 0 after 3 msecs
calling lp_init_module+0x0/0x240()
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x240() returned 0 after 3 msecs
calling nvram_init+0x0/0x8a()
PM: Adding info for No Bus:nvram
Non-volatile memory driver v1.2
initcall nvram_init+0x0/0x8a() returned 0 after 6 msecs
calling i8k_init+0x0/0x15c()
initcall i8k_init+0x0/0x15c() returned -19 after 0 msecs
calling pc8736x_gpio_init+0x0/0x3a4()
PM: Adding info for platform:pc8736x_gpio.0
platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
platform pc8736x_gpio.0: no device found
PM: Removing info for platform:pc8736x_gpio.0
initcall pc8736x_gpio_init+0x0/0x3a4() returned -19 after 12 msecs
calling nsc_gpio_init+0x0/0x16()
nsc_gpio initializing
initcall nsc_gpio_init+0x0/0x16() returned 0 after 0 msecs
calling agp_init+0x0/0x26()
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26() returned 0 after 0 msecs
calling agp_intel_init+0x0/0x29()
initcall agp_intel_init+0x0/0x29() returned 0 after 0 msecs
calling agp_via_init+0x0/0x29()
initcall agp_via_init+0x0/0x29() returned 0 after 0 msecs
calling hangcheck_init+0x0/0x8b()
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
initcall hangcheck_init+0x0/0x8b() returned 0 after 6 msecs
calling serial8250_init+0x0/0x146()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PM: Adding info for platform:serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PM: Adding info for No Bus:ttyS0
PM: Adding info for No Bus:ttyS1
PM: Adding info for No Bus:ttyS2
PM: Adding info for No Bus:ttyS3
initcall serial8250_init+0x0/0x146() returned 0 after 22 msecs
calling init_kgdboc+0x0/0x16()
initcall init_kgdboc+0x0/0x16() returned 0 after 0 msecs
calling parport_default_proc_register+0x0/0x8()
initcall parport_default_proc_register+0x0/0x8() returned 0 after 0 msecs
calling parport_pc_init+0x0/0x1a9()
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
PM: Adding info for No Bus:lp0
lp0: using parport0 (interrupt-driven).
lp0: console ready
PM: Adding info for platform:parport_pc.956
PM: Removing info for platform:parport_pc.956
PM: Adding info for platform:parport_pc.888
PM: Removing info for platform:parport_pc.888
PM: Adding info for platform:parport_pc.632
PM: Removing info for platform:parport_pc.632
initcall parport_pc_init+0x0/0x1a9() returned 0 after 111 msecs
calling floppy_init+0x0/0xefb()
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PM: Adding info for platform:floppy.0
PM: Adding info for No Bus:fd0
PM: Adding info for No Bus:2:0
initcall floppy_init+0x0/0xefb() returned 0 after 28 msecs
calling cpqarray_init+0x0/0x264()
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x264() returned 0 after 3 msecs
calling cciss_init+0x0/0x29()
HP CISS Driver (v 3.6.14)
initcall cciss_init+0x0/0x29() returned 0 after 3 msecs
calling DAC960_init_module+0x0/0x4d()
PM: Adding info for No Bus:dac960_gam
initcall DAC960_init_module+0x0/0x4d() returned 0 after 3 msecs
calling mm_init+0x0/0x192()
MM: desc_per_page = 128
initcall mm_init+0x0/0x192() returned 0 after 3 msecs
calling nbd_init+0x0/0x314()
nbd: registered device at major 43
PM: Adding info for No Bus:nbd0
PM: Adding info for No Bus:43:0
PM: Adding info for No Bus:nbd1
PM: Adding info for No Bus:43:1
PM: Adding info for No Bus:nbd2
PM: Adding info for No Bus:43:2
PM: Adding info for No Bus:nbd3
PM: Adding info for No Bus:43:3
PM: Adding info for No Bus:nbd4
PM: Adding info for No Bus:43:4
PM: Adding info for No Bus:nbd5
PM: Adding info for No Bus:43:5
PM: Adding info for No Bus:nbd6
PM: Adding info for No Bus:43:6
PM: Adding info for No Bus:nbd7
PM: Adding info for No Bus:43:7
PM: Adding info for No Bus:nbd8
PM: Adding info for No Bus:43:8
PM: Adding info for No Bus:nbd9
PM: Adding info for No Bus:43:9
PM: Adding info for No Bus:nbd10
PM: Adding info for No Bus:43:10
PM: Adding info for No Bus:nbd11
PM: Adding info for No Bus:43:11
PM: Adding info for No Bus:nbd12
PM: Adding info for No Bus:43:12
PM: Adding info for No Bus:nbd13
PM: Adding info for No Bus:43:13
PM: Adding info for No Bus:nbd14
PM: Adding info for No Bus:43:14
PM: Adding info for No Bus:nbd15
PM: Adding info for No Bus:43:15
initcall nbd_init+0x0/0x314() returned 0 after 98 msecs
calling init_kgdbts+0x0/0x16()
kgdb: Registered I/O driver kgdbts.
kgdbts:RUN plant and detach test
kgdbts:RUN sw breakpoint test
kgdbts:RUN bad memory access test
kgdbts:RUN singlestep test 1000 iterations
kgdbts:RUN singlestep [0/1000]
kgdbts:RUN singlestep [100/1000]
kgdbts:RUN singlestep [200/1000]
kgdbts:RUN singlestep [300/1000]
kgdbts:RUN singlestep [400/1000]
kgdbts:RUN singlestep [500/1000]
kgdbts:RUN singlestep [600/1000]
kgdbts:RUN singlestep [700/1000]
kgdbts:RUN singlestep [800/1000]
kgdbts:RUN singlestep [900/1000]
kgdbts:RUN hw breakpoint test
kgdbts:RUN hw write breakpoint test
kgdbts:RUN access write breakpoint test
kgdbts:RUN do_fork for 100 breakpoints
initcall init_kgdbts+0x0/0x16() returned 0 after 158 msecs
calling e1000_init_module+0x0/0x88()
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
initcall e1000_init_module+0x0/0x88() returned 0 after 6 msecs
calling igb_init_module+0x0/0x4c()
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
initcall igb_init_module+0x0/0x4c() returned 0 after 6 msecs
calling ixgbe_init_module+0x0/0x66()
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
initcall ixgbe_init_module+0x0/0x66() returned 0 after 6 msecs
calling ixgb_init_module+0x0/0x4c()
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
initcall ixgb_init_module+0x0/0x4c() returned 0 after 6 msecs
calling ipg_init_module+0x0/0x1b()
initcall ipg_init_module+0x0/0x1b() returned 0 after 3 msecs
calling vcan_init_module+0x0/0x37()
vcan: Virtual CAN interface driver
initcall vcan_init_module+0x0/0x37() returned 0 after 3 msecs
calling atl1_init_module+0x0/0x1b()
initcall atl1_init_module+0x0/0x1b() returned 0 after 0 msecs
calling bdx_module_init+0x0/0x9a()
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
initcall bdx_module_init+0x0/0x9a() returned 0 after 6 msecs
calling plip_init+0x0/0x5d()
PM: Adding info for No Bus:plip0
NET3 PLIP version 2.4-parport gniibe@....co.jp
plip0: Parallel port at 0x378, using IRQ 7.
initcall plip_init+0x0/0x5d() returned 0 after 9 msecs
calling happy_meal_probe+0x0/0x1b()
initcall happy_meal_probe+0x0/0x1b() returned 0 after 0 msecs
calling gem_init+0x0/0x1b()
initcall gem_init+0x0/0x1b() returned 0 after 3 msecs
calling ne2k_pci_init+0x0/0x1b()
initcall ne2k_pci_init+0x0/0x1b() returned 0 after 0 msecs
calling eepro100_init_module+0x0/0x1b()
initcall eepro100_init_module+0x0/0x1b() returned 0 after 0 msecs
calling e100_init_module+0x0/0x5d()
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x5d() returned 0 after 6 msecs
calling sis900_init_module+0x0/0x1b()
initcall sis900_init_module+0x0/0x1b() returned 0 after 0 msecs
calling r6040_init+0x0/0x1b()
initcall r6040_init+0x0/0x1b() returned 0 after 0 msecs
calling acenic_init+0x0/0x1b()
initcall acenic_init+0x0/0x1b() returned 0 after 0 msecs
calling ns83820_init+0x0/0x29()
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
initcall ns83820_init+0x0/0x29() returned 0 after 3 msecs
calling fealnx_init+0x0/0x1b()
initcall fealnx_init+0x0/0x1b() returned 0 after 0 msecs
calling tg3_init+0x0/0x1b()
initcall tg3_init+0x0/0x1b() returned 0 after 0 msecs
calling bnx2_init+0x0/0x1b()
initcall bnx2_init+0x0/0x1b() returned 0 after 0 msecs
calling bnx2x_init+0x0/0x1b()
initcall bnx2x_init+0x0/0x1b() returned 0 after 0 msecs
calling skfd_init+0x0/0x1b()
initcall skfd_init+0x0/0x1b() returned 0 after 0 msecs
calling rhine_init+0x0/0x39()
initcall rhine_init+0x0/0x39() returned 0 after 3 msecs
calling starfire_init+0x0/0x1b()
initcall starfire_init+0x0/0x1b() returned 0 after 0 msecs
calling marvell_init+0x0/0x71()
initcall marvell_init+0x0/0x71() returned 0 after 3 msecs
calling lxt_init+0x0/0x3f()
initcall lxt_init+0x0/0x3f() returned 0 after 0 msecs
calling qs6612_init+0x0/0x12()
initcall qs6612_init+0x0/0x12() returned 0 after 0 msecs
calling vsc8244_init+0x0/0x12()
initcall vsc8244_init+0x0/0x12() returned 0 after 0 msecs
calling broadcom_init+0x0/0xbb()
initcall broadcom_init+0x0/0xbb() returned 0 after 0 msecs
calling sundance_init+0x0/0x1b()
initcall sundance_init+0x0/0x1b() returned 0 after 0 msecs
calling hamachi_init+0x0/0x1b()
initcall hamachi_init+0x0/0x1b() returned 0 after 0 msecs
calling net_olddevs_init+0x0/0xa0()
initcall net_olddevs_init+0x0/0xa0() returned 0 after 0 msecs
calling sb1000_init+0x0/0x12()
initcall sb1000_init+0x0/0x12() returned 0 after 0 msecs
calling init_nic+0x0/0x1b()
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
IOAPIC[0]: Set routing entry (2-23 -> 0x49 -> IRQ 23 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PM: Adding info for No Bus:eth0
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
initcall init_nic+0x0/0x1b() returned 0 after 521 msecs
calling slip_init+0x0/0xb2()
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
initcall slip_init+0x0/0xb2() returned 0 after 6 msecs
calling dummy_init_module+0x0/0xb5()
PM: Adding info for No Bus:dummy0
initcall dummy_init_module+0x0/0xb5() returned 0 after 3 msecs
calling macvlan_init_module+0x0/0x53()
initcall macvlan_init_module+0x0/0x53() returned 0 after 0 msecs
calling cp_init+0x0/0x1b()
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:05:07.0: Try the "8139too" driver instead.
initcall cp_init+0x0/0x1b() returned 0 after 9 msecs
calling rtl8139_init_module+0x0/0x1b()
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
PM: Adding info for No Bus:eth1
eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 17
eth1: Identified 8139 chip type 'RTL-8139B'
initcall rtl8139_init_module+0x0/0x1b() returned 0 after 25 msecs
calling eql_init_module+0x0/0x65()
Equalizer2002: Simon Janes (simon@....com) and David S. Miller (davem@...hat.com)
PM: Adding info for No Bus:eql
initcall eql_init_module+0x0/0x65() returned 0 after 6 msecs
calling tun_init+0x0/0xa0()
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
PM: Adding info for No Bus:tun
initcall tun_init+0x0/0xa0() returned 0 after 9 msecs
calling veth_init+0x0/0x1e()
initcall veth_init+0x0/0x1e() returned 0 after 0 msecs
calling rtl8169_init_module+0x0/0x1b()
initcall rtl8169_init_module+0x0/0x1b() returned 0 after 0 msecs
calling amd8111e_init+0x0/0x1b()
initcall amd8111e_init+0x0/0x1b() returned 0 after 0 msecs
calling s2io_starter+0x0/0x1b()
initcall s2io_starter+0x0/0x1b() returned 0 after 0 msecs
calling enc28j60_init+0x0/0x12()
initcall enc28j60_init+0x0/0x12() returned 0 after 0 msecs
calling pegasus_init+0x0/0x19a()
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x19a() returned 0 after 6 msecs
calling cdc_init+0x0/0x1b()
usbcore: registered new interface driver cdc_ether
initcall cdc_init+0x0/0x1b() returned 0 after 3 msecs
calling dm9601_init+0x0/0x1b()
usbcore: registered new interface driver dm9601
initcall dm9601_init+0x0/0x1b() returned 0 after 3 msecs
calling usbnet_init+0x0/0x1b()
usbcore: registered new interface driver gl620a
initcall usbnet_init+0x0/0x1b() returned 0 after 3 msecs
calling net1080_init+0x0/0x1b()
usbcore: registered new interface driver net1080
initcall net1080_init+0x0/0x1b() returned 0 after 3 msecs
calling plusb_init+0x0/0x1b()
usbcore: registered new interface driver plusb
initcall plusb_init+0x0/0x1b() returned 0 after 3 msecs
calling rndis_init+0x0/0x1b()
usbcore: registered new interface driver rndis_host
initcall rndis_init+0x0/0x1b() returned 0 after 3 msecs
calling cdc_subset_init+0x0/0x1b()
usbcore: registered new interface driver cdc_subset
initcall cdc_subset_init+0x0/0x1b() returned 0 after 3 msecs
calling zaurus_init+0x0/0x1b()
usbcore: registered new interface driver zaurus
initcall zaurus_init+0x0/0x1b() returned 0 after 3 msecs
calling mcs7830_init+0x0/0x1b()
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
initcall mcs7830_init+0x0/0x1b() returned 0 after 3 msecs
calling usbnet_init+0x0/0x2b()
initcall usbnet_init+0x0/0x2b() returned 0 after 0 msecs
calling ipw2100_init+0x0/0x83()
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
initcall ipw2100_init+0x0/0x83() returned 0 after 6 msecs
calling init_orinoco+0x0/0x1d()
orinoco 0.15 (David Gibson <hermes@...son.dropbear.id.au>, Pavel Roskin <proski@....org>, et al)
initcall init_orinoco+0x0/0x1d() returned 0 after 3 msecs
calling init_hermes+0x0/0x8()
initcall init_hermes+0x0/0x8() returned 0 after 0 msecs
calling orinoco_plx_init+0x0/0x30()
orinoco_plx 0.15 (Pavel Roskin <proski@....org>, David Gibson <hermes@...son.dropbear.id.au>, Daniel Barlow <dan@...ent.net>)
initcall orinoco_plx_init+0x0/0x30() returned 0 after 3 msecs
calling orinoco_pci_init+0x0/0x30()
orinoco_pci 0.15 (Pavel Roskin <proski@....org>, David Gibson <hermes@...son.dropbear.id.au> & Jean Tourrilhes <jt@....hp.com>)
initcall orinoco_pci_init+0x0/0x30() returned 0 after 3 msecs
calling orinoco_nortel_init+0x0/0x30()
orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@...um404.de>)
initcall orinoco_nortel_init+0x0/0x30() returned 0 after 3 msecs
calling airo_init_module+0x0/0xed()
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
initcall airo_init_module+0x0/0xed() returned 0 after 6 msecs
calling prism54_module_init+0x0/0x37()
Loaded prism54 driver, version 1.2
initcall prism54_module_init+0x0/0x37() returned 0 after 3 msecs
calling hostap_init+0x0/0x45()
initcall hostap_init+0x0/0x45() returned 0 after 0 msecs
calling init_prism2_pci+0x0/0x1b()
initcall init_prism2_pci+0x0/0x1b() returned 0 after 0 msecs
calling b43_init+0x0/0x50()
Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
initcall b43_init+0x0/0x50() returned 0 after 3 msecs
calling usb_init+0x0/0xc0()
zd1211rw usb_init()
usbcore: registered new interface driver zd1211rw
zd1211rw initialized
initcall usb_init+0x0/0xc0() returned 0 after 9 msecs
calling rtl8187_init+0x0/0x1b()
usbcore: registered new interface driver rtl8187
initcall rtl8187_init+0x0/0x1b() returned 0 after 3 msecs
calling iwl4965_init+0x0/0xab()
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26kd
iwl4965: Copyright(c) 2003-2008 Intel Corporation
initcall iwl4965_init+0x0/0xab() returned 0 after 6 msecs
calling init_ath5k_pci+0x0/0x3e()
initcall init_ath5k_pci+0x0/0x3e() returned 0 after 0 msecs
calling usb_irda_init+0x0/0x3e()
usbcore: registered new interface driver irda-usb
USB IrDA support registered
initcall usb_irda_init+0x0/0x3e() returned 0 after 3 msecs
calling stir_init+0x0/0x1b()
usbcore: registered new interface driver stir4200
initcall stir_init+0x0/0x1b() returned 0 after 3 msecs
calling w83977af_init+0x0/0x47f()
initcall w83977af_init+0x0/0x47f() returned -19 after 0 msecs
calling smsc_ircc_init+0x0/0x52a()
initcall smsc_ircc_init+0x0/0x52a() returned -19 after 0 msecs
calling ali_ircc_init+0x0/0x659()
initcall ali_ircc_init+0x0/0x659() returned -19 after 0 msecs
calling via_ircc_init+0x0/0x21()
initcall via_ircc_init+0x0/0x21() returned 0 after 0 msecs
calling mcs_init+0x0/0x43()
usbcore: registered new interface driver mcs7780
initcall mcs_init+0x0/0x43() returned 0 after 3 msecs
calling kingsun_init+0x0/0x1b()
usbcore: registered new interface driver kingsun-sir
initcall kingsun_init+0x0/0x1b() returned 0 after 3 msecs
calling init_netconsole+0x0/0x1dd()
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1dd() returned 0 after 3 msecs
calling netxen_init_module+0x0/0x4d()
initcall netxen_init_module+0x0/0x4d() returned 0 after 0 msecs
calling niu_init+0x0/0x3d()
initcall niu_init+0x0/0x3d() returned 0 after 0 msecs
calling mac_hid_init+0x0/0xbd()
PM: Adding info for No Bus:input2
input: Macintosh mouse button emulation as /class/input/input2
initcall mac_hid_init+0x0/0xbd() returned 0 after 6 msecs
calling spi_transport_init+0x0/0x2e()
initcall spi_transport_init+0x0/0x2e() returned 0 after 3 msecs
calling fc_transport_init+0x0/0x4c()
initcall fc_transport_init+0x0/0x4c() returned 0 after 3 msecs
calling iscsi_transport_init+0x0/0x11d()
Loading iSCSI transport class v2.0-869.
initcall iscsi_transport_init+0x0/0x11d() returned 0 after 6 msecs
calling srp_transport_init+0x0/0x3f()
initcall srp_transport_init+0x0/0x3f() returned 0 after 3 msecs
calling ahc_linux_init+0x0/0x59()
initcall ahc_linux_init+0x0/0x59() returned 0 after 0 msecs
calling init_osst+0x0/0x12e()
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
initcall init_osst+0x0/0x12e() returned 0 after 9 msecs
calling init_sd+0x0/0xe8()
Driver 'sd' needs updating - please use bus_type methods
initcall init_sd+0x0/0xe8() returned 0 after 3 msecs
calling init_sr+0x0/0x49()
Driver 'sr' needs updating - please use bus_type methods
initcall init_sr+0x0/0x49() returned 0 after 3 msecs
calling ahci_init+0x0/0x1b()
initcall ahci_init+0x0/0x1b() returned 0 after 0 msecs
calling piix_init+0x0/0x29()
initcall piix_init+0x0/0x29() returned 0 after 0 msecs
calling pdc_ata_init+0x0/0x1b()
initcall pdc_ata_init+0x0/0x1b() returned 0 after 0 msecs
calling qs_ata_init+0x0/0x1b()
initcall qs_ata_init+0x0/0x1b() returned 0 after 0 msecs
calling sil_init+0x0/0x1b()
initcall sil_init+0x0/0x1b() returned 0 after 0 msecs
calling sil24_init+0x0/0x1b()
initcall sil24_init+0x0/0x1b() returned 0 after 0 msecs
calling nv_init+0x0/0x1b()
initcall nv_init+0x0/0x1b() returned 0 after 0 msecs
calling uli_init+0x0/0x1b()
initcall uli_init+0x0/0x1b() returned 0 after 0 msecs
calling mv_init+0x0/0x49()
initcall mv_init+0x0/0x49() returned 0 after 0 msecs
calling inic_init+0x0/0x1b()
initcall inic_init+0x0/0x1b() returned 0 after 0 msecs
calling amd_init+0x0/0x1b()
pata_amd 0000:00:06.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
PM: Adding info for No Bus:host0
PM: Adding info for No Bus:host0
scsi1 : pata_amd
PM: Adding info for No Bus:host1
PM: Adding info for No Bus:host1
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata1.00: 488397168 sectors, multi 1: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
ata1.00: configured for UDMA/100
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: link is slow to respond, please be patient (ready=0)
ata2: SRST failed (errno=-16)
ata2: SRST failed (errno=-16)
ata2: reset failed, giving up
scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
PM: Adding info for No Bus:target0:0:0
PM: Adding info for scsi:0:0:0:0
PM: Adding info for No Bus:0:0:0:0
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sda
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
PM: Adding info for No Bus:sda5
PM: Adding info for No Bus:sda6
PM: Adding info for No Bus:sda7
PM: Adding info for No Bus:sda8
PM: Adding info for No Bus:sda9
PM: Adding info for No Bus:sda10
PM: Adding info for No Bus:8:0
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Adding info for No Bus:0:0:0:0
initcall amd_init+0x0/0x1b() returned 0 after 57700 msecs
calling artop_init+0x0/0x1b()
initcall artop_init+0x0/0x1b() returned 0 after 0 msecs
calling atiixp_init+0x0/0x1b()
initcall atiixp_init+0x0/0x1b() returned 0 after 0 msecs
calling cmd64x_init+0x0/0x1b()
initcall cmd64x_init+0x0/0x1b() returned 0 after 0 msecs
calling cs5520_init+0x0/0x1b()
initcall cs5520_init+0x0/0x1b() returned 0 after 0 msecs
calling cs5530_init+0x0/0x1b()
initcall cs5530_init+0x0/0x1b() returned 0 after 0 msecs
calling hpt36x_init+0x0/0x1b()
initcall hpt36x_init+0x0/0x1b() returned 0 after 3 msecs
calling hpt37x_init+0x0/0x1b()
initcall hpt37x_init+0x0/0x1b() returned 0 after 0 msecs
calling hpt3x3_init+0x0/0x1b()
initcall hpt3x3_init+0x0/0x1b() returned 0 after 0 msecs
calling it821x_init+0x0/0x1b()
initcall it821x_init+0x0/0x1b() returned 0 after 0 msecs
calling it8213_init+0x0/0x1b()
initcall it8213_init+0x0/0x1b() returned 0 after 0 msecs
calling oldpiix_init+0x0/0x1b()
initcall oldpiix_init+0x0/0x1b() returned 0 after 0 msecs
calling pdc2027x_init+0x0/0x1b()
initcall pdc2027x_init+0x0/0x1b() returned 0 after 0 msecs
calling radisys_init+0x0/0x1b()
initcall radisys_init+0x0/0x1b() returned 0 after 0 msecs
calling sc1200_init+0x0/0x1b()
initcall sc1200_init+0x0/0x1b() returned 0 after 0 msecs
calling serverworks_init+0x0/0x1b()
initcall serverworks_init+0x0/0x1b() returned 0 after 0 msecs
calling via_init+0x0/0x1b()
initcall via_init+0x0/0x1b() returned 0 after 0 msecs
calling sl82c105_init+0x0/0x1b()
initcall sl82c105_init+0x0/0x1b() returned 0 after 0 msecs
calling ata_generic_init+0x0/0x1b()
initcall ata_generic_init+0x0/0x1b() returned 0 after 0 msecs
calling uio_init+0x0/0x8()
initcall uio_init+0x0/0x8() returned 0 after 0 msecs
calling hilscher_init_module+0x0/0x1b()
initcall hilscher_init_module+0x0/0x1b() returned 0 after 0 msecs
calling smx_ce_init_module+0x0/0x12()
initcall smx_ce_init_module+0x0/0x12() returned 0 after 0 msecs
calling cdrom_init+0x0/0x8()
initcall cdrom_init+0x0/0x8() returned 0 after 0 msecs
calling ks0108_init+0x0/0xba()
parport0: cannot grant exclusive access for device ks0108
ks0108: ERROR: parport didn't register new device
initcall ks0108_init+0x0/0xba() returned -22 after 6 msecs
initcall ks0108_init+0x0/0xba() returned with error code -22
calling butterfly_init+0x0/0x12()
parport0: powerup/reset Butterfly
PM: Adding info for No Bus:spi42
parport_pc 00:09: registered master spi42
spi spi42.1: spi_bitbang_setup, mode 0, 8 bits/w, 66 nsec/bit
PM: Adding info for spi:spi42.1
parport_pc 00:09: registered child spi42.1
parport0: dataflash at spi42.1
parport0: AVR Butterfly
initcall butterfly_init+0x0/0x12() returned 0 after 130 msecs
calling at25_init+0x0/0x12()
initcall at25_init+0x0/0x12() returned 0 after 0 msecs
calling spidev_init+0x0/0x6e()
initcall spidev_init+0x0/0x6e() returned 0 after 0 msecs
calling aoe_init+0x0/0xa7()
PM: Adding info for No Bus:err
PM: Adding info for No Bus:discover
PM: Adding info for No Bus:interfaces
PM: Adding info for No Bus:revalidate
PM: Adding info for No Bus:flush
aoe: AoE v47 initialised.
initcall aoe_init+0x0/0xa7() returned 0 after 19 msecs
calling mon_init+0x0/0x115()
PM: Adding info for No Bus:usbmon0
initcall mon_init+0x0/0x115() returned 0 after 3 msecs
calling ehci_hcd_init+0x0/0x8b()
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
IOAPIC[0]: Set routing entry (2-22 -> 0x59 -> IRQ 22 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
PM: Adding info for No Bus:usb_host1
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
PM: Adding info for No Bus:usbmon1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: reset hcs_params 0x10148a dbg=1 cc=1 pcc=4 !ppc ports=10
ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=10
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: supports USB remote wakeup
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
PM: Adding info for usb:usb1
usb usb1: uevent
usb usb1: usb_probe_device
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
PM: Adding info for usb:1-0:1.0
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
PM: Adding info for No Bus:usbdev1.1_ep81
drivers/usb/core/inode.c: creating file '001'
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26-rc1-sched-devel.git-x86-latest.git ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
initcall ehci_hcd_init+0x0/0x8b() returned 0 after 270 msecs
calling isp116x_init+0x0/0x3e()
116x: driver isp116x-hcd, 03 Nov 2005
initcall isp116x_init+0x0/0x3e() returned 0 after 6 msecs
calling ohci_hcd_mod_init+0x0/0xc5()
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
IOAPIC[0]: Set routing entry (2-21 -> 0x61 -> IRQ 21 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
PM: Adding info for No Bus:usb_host2
drivers/usb/core/inode.c: creating file '002'
PM: Adding info for No Bus:usbmon2
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: irq 21, io mem 0xda102000
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0020
ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
usb usb2: default language 0x0409
PM: Adding info for usb:usb2
usb usb2: uevent
usb usb2: usb_probe_device
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
PM: Adding info for usb:2-0:1.0
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
PM: Adding info for No Bus:usbdev2.1_ep81
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-rc1-sched-devel.git-x86-latest.git ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
initcall ohci_hcd_mod_init+0x0/0xc5() returned 0 after 343 msecs
calling uhci_hcd_init+0x0/0xe7()
USB Universal Host Controller Interface driver v3.0
initcall uhci_hcd_init+0x0/0xe7() returned 0 after 3 msecs
calling isp1760_init+0x0/0x14()
initcall isp1760_init+0x0/0x14() returned 0 after 0 msecs
calling acm_init+0x0/0x101()
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
initcall acm_init+0x0/0x101() returned 0 after 6 msecs
calling usblp_init+0x0/0x1b()
usbcore: registered new interface driver usblp
initcall usblp_init+0x0/0x1b() returned 0 after 3 msecs
calling usb_stor_init+0x0/0x46()
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
initcall usb_stor_init+0x0/0x46() returned 0 after 9 msecs
calling usb_mdc800_init+0x0/0x26a()
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
initcall usb_mdc800_init+0x0/0x26a() returned 0 after 6 msecs
calling microtek_drv_init+0x0/0x1b()
usbcore: registered new interface driver microtekX6
initcall microtek_drv_init+0x0/0x1b() returned 0 after 6 msecs
calling usb_serial_init+0x0/0x238()
usbcore: registered new interface driver usbserial
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
initcall usb_serial_init+0x0/0x238() returned 0 after 15 msecs
calling aircable_init+0x0/0x46()
usbserial: USB Serial support registered for aircable
usbcore: registered new interface driver aircable
initcall aircable_init+0x0/0x46() returned 0 after 6 msecs
calling airprime_init+0x0/0x5c()
usbserial: USB Serial support registered for airprime
usbcore: registered new interface driver airprime
initcall airprime_init+0x0/0x5c() returned 0 after 6 msecs
calling ark3116_init+0x0/0x48()
usbserial: USB Serial support registered for ark3116
usbcore: registered new interface driver ark3116
initcall ark3116_init+0x0/0x48() returned 0 after 6 msecs
calling ch341_init+0x0/0x48()
usbserial: USB Serial support registered for ch341-uart
usbcore: registered new interface driver ch341
initcall ch341_init+0x0/0x48() returned 0 after 9 msecs
calling cp2101_init+0x0/0x58()
usbserial: USB Serial support registered for cp2101
usbcore: registered new interface driver cp2101
cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
initcall cp2101_init+0x0/0x58() returned 0 after 9 msecs
calling usb_ipw_init+0x0/0x58()
usbserial: USB Serial support registered for IPWireless converter
usbcore: registered new interface driver ipwtty
ipw: IPWireless tty driver v0.3
initcall usb_ipw_init+0x0/0x58() returned 0 after 9 msecs
calling ir_init+0x0/0x58()
usbserial: USB Serial support registered for IR Dongle
usbcore: registered new interface driver ir-usb
ir_usb: USB IR Dongle driver v0.4
initcall ir_init+0x0/0x58() returned 0 after 9 msecs
calling mct_u232_init+0x0/0x58()
usbserial: USB Serial support registered for MCT U232
usbcore: registered new interface driver mct_u232
mct_u232: Magic Control Technology USB-RS232 converter driver z2.1
initcall mct_u232_init+0x0/0x58() returned 0 after 9 msecs
calling omninet_init+0x0/0x58()
usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver omninet
omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
initcall omninet_init+0x0/0x58() returned 0 after 12 msecs
calling option_init+0x0/0x58()
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: USB Driver for GSM modems: v0.7.2
initcall option_init+0x0/0x58() returned 0 after 9 msecs
calling pl2303_init+0x0/0x58()
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
initcall pl2303_init+0x0/0x58() returned 0 after 9 msecs
calling spcp8x5_init+0x0/0x58()
usbserial: USB Serial support registered for SPCP8x5
usbcore: registered new interface driver spcp8x5
spcp8x5: SPCP8x5 USB to serial adaptor driver v0.04
initcall spcp8x5_init+0x0/0x58() returned 0 after 9 msecs
calling ti_init+0x0/0x13a()
usbserial: USB Serial support registered for TI USB 3410 1 port adapter
usbserial: USB Serial support registered for TI USB 5052 2 port adapter
usbcore: registered new interface driver ti_usb_3410_5052
ti_usb_3410_5052: TI USB 3410/5052 Serial Driver v0.9
initcall ti_init+0x0/0x13a() returned 0 after 12 msecs
calling whiteheat_init+0x0/0x76()
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
usbcore: registered new interface driver whiteheat
whiteheat: USB ConnectTech WhiteHEAT driver v2.0
initcall whiteheat_init+0x0/0x76() returned 0 after 12 msecs
calling adu_init+0x0/0x96()
drivers/usb/misc/adutux.c : adu_init : enter
usbcore: registered new interface driver adutux
adutux: adutux adutux (see www.ontrak.net) v0.0.13
adutux: adutux is an experimental driver. Use at your own risk
drivers/usb/misc/adutux.c : adu_init : leave, return value 0
initcall adu_init+0x0/0x96() returned 0 after 15 msecs
calling usb_cytherm_init+0x0/0x4a()
usbcore: registered new interface driver cytherm
cytherm: v1.0:Cypress USB Thermometer driver
initcall usb_cytherm_init+0x0/0x4a() returned 0 after 6 msecs
calling ftdi_elan_init+0x0/0x168()
driver ftdi-elan built at 16:18:24 on May 7 2008
usbcore: registered new interface driver ftdi-elan
initcall ftdi_elan_init+0x0/0x168() returned 0 after 6 msecs
calling usb_idmouse_init+0x0/0x48()
idmouse: Siemens ID Mouse FingerTIP Sensor Driver 0.6
usbcore: registered new interface driver idmouse
initcall usb_idmouse_init+0x0/0x48() returned 0 after 9 msecs
calling usb_led_init+0x0/0x3a()
usbcore: registered new interface driver usbled
initcall usb_led_init+0x0/0x3a() returned 0 after 3 msecs
calling tv_init+0x0/0x4a()
usbcore: registered new interface driver trancevibrator
trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
initcall tv_init+0x0/0x4a() returned 0 after 6 msecs
calling i8042_init+0x0/0x32e()
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x32e() returned 0 after 19 msecs
calling parkbd_init+0x0/0x188()
parport0: cannot grant exclusive access for device parkbd
initcall parkbd_init+0x0/0x188() returned -19 after 3 msecs
calling serport_init+0x0/0x34()
initcall serport_init+0x0/0x34() returned 0 after 0 msecs
calling ct82c710_init+0x0/0x196()
initcall ct82c710_init+0x0/0x196() returned -19 after 0 msecs
calling pcips2_init+0x0/0x1b()
PM: Adding info for serio:serio0
PM: Adding info for serio:serio1
initcall pcips2_init+0x0/0x1b() returned 0 after 6 msecs
calling ns558_init+0x0/0x327()
gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 891kHz
PM: Adding info for gameport:gameport0
initcall ns558_init+0x0/0x327() returned 0 after 28 msecs
calling mousedev_init+0x0/0x62()
PM: Adding info for No Bus:mice
PM: Adding info for No Bus:mouse0
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x62() returned 0 after 19 msecs
calling atkbd_init+0x0/0x1b()
initcall atkbd_init+0x0/0x1b() returned 0 after 0 msecs
calling xtkbd_init+0x0/0x1b()
initcall xtkbd_init+0x0/0x1b() returned 0 after 3 msecs
calling nkbd_init+0x0/0x1b()
PM: Adding info for No Bus:input3
input: AT Translated Set 2 keyboard as /class/input/input3
initcall nkbd_init+0x0/0x1b() returned 0 after 41 msecs
calling skbd_init+0x0/0x1b()
initcall skbd_init+0x0/0x1b() returned 0 after 0 msecs
calling atp_init+0x0/0x1b()
usbcore: registered new interface driver appletouch
initcall atp_init+0x0/0x1b() returned 0 after 3 msecs
calling sermouse_init+0x0/0x1b()
initcall sermouse_init+0x0/0x1b() returned 0 after 0 msecs
calling gtco_init+0x0/0x51()
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x51() returned 0 after 6 msecs
calling kbtab_init+0x0/0x38()
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
initcall kbtab_init+0x0/0x38() returned 0 after 6 msecs
calling pcspkr_init+0x0/0x12()
PM: Adding info for No Bus:input4
input: PC Speaker as /class/input/input4
initcall pcspkr_init+0x0/0x12() returned 0 after 15 msecs
calling ati_remote2_init+0x0/0x4a()
usbcore: registered new interface driver ati_remote2
ati_remote2: ATI/Philips USB RF remote driver 0.2
initcall ati_remote2_init+0x0/0x4a() returned 0 after 6 msecs
calling i2o_iop_init+0x0/0x48()
I2O subsystem v1.325
i2o: max drivers = 8
initcall i2o_iop_init+0x0/0x48() returned 0 after 6 msecs
calling i2o_block_init+0x0/0x122()
I2O Block Device OSM v1.325
initcall i2o_block_init+0x0/0x122() returned 0 after 3 msecs
calling i2o_proc_init+0x0/0x193()
I2O ProcFS OSM v1.316
initcall i2o_proc_init+0x0/0x193() returned 0 after 3 msecs
calling cmos_init+0x0/0x12()
PM: Adding info for No Bus:rtc0
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
initcall cmos_init+0x0/0x12() returned 0 after 9 msecs
calling ds1553_init+0x0/0x12()
initcall ds1553_init+0x0/0x12() returned 0 after 0 msecs
calling ds1742_init+0x0/0x12()
initcall ds1742_init+0x0/0x12() returned 0 after 0 msecs
calling m48t59_rtc_init+0x0/0x12()
initcall m48t59_rtc_init+0x0/0x12() returned 0 after 0 msecs
calling m48t86_rtc_init+0x0/0x12()
initcall m48t86_rtc_init+0x0/0x12() returned 0 after 0 msecs
calling r9701_init+0x0/0x12()
initcall r9701_init+0x0/0x12() returned 0 after 0 msecs
calling v3020_init+0x0/0x12()
initcall v3020_init+0x0/0x12() returned 0 after 0 msecs
calling abituguru_init+0x0/0x151()
abituguru: no Abit uGuru found, data = 0xFF, cmd = 0xFF
initcall abituguru_init+0x0/0x151() returned -19 after 3 msecs
calling abituguru3_init+0x0/0x152()
abituguru3: no Abit uGuru3 found, data = 0xFF, cmd = 0xFF
initcall abituguru3_init+0x0/0x152() returned -19 after 3 msecs
calling coretemp_init+0x0/0x1f7()
initcall coretemp_init+0x0/0x1f7() returned -19 after 0 msecs
calling f71805f_init+0x0/0x14d()
initcall f71805f_init+0x0/0x14d() returned -19 after 0 msecs
calling hdaps_init+0x0/0x2c()
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
initcall hdaps_init+0x0/0x2c() returned -19 after 6 msecs
calling pc87360_init+0x0/0x191()
pc87360: PC8736x not detected, module not inserted.
initcall pc87360_init+0x0/0x191() returned -19 after 3 msecs
calling smsc47b397_init+0x0/0x18a()
initcall smsc47b397_init+0x0/0x18a() returned -19 after 0 msecs
calling sm_smsc47m1_init+0x0/0x1f0()
initcall sm_smsc47m1_init+0x0/0x1f0() returned -19 after 0 msecs
calling vt1211_init+0x0/0x150()
initcall vt1211_init+0x0/0x150() returned -19 after 0 msecs
calling sm_vt8231_init+0x0/0x1b()
initcall sm_vt8231_init+0x0/0x1b() returned 0 after 0 msecs
calling usb_pcwd_init+0x0/0x4b()
usbcore: registered new interface driver pcwd_usb
pcwd_usb: Berkshire USB-PC Watchdog driver v1.02 (21 Jan 2007)
initcall usb_pcwd_init+0x0/0x4b() returned 0 after 6 msecs
calling advwdt_init+0x0/0x5f()
WDT driver for Advantech single board computer initialising.
PM: Adding info for platform:advantechwdt
PM: Adding info for No Bus:watchdog
advantechwdt: initialized. timeout=60 sec (nowayout=1)
initcall advwdt_init+0x0/0x5f() returned 0 after 12 msecs
calling watchdog_init+0x0/0x16a()
initcall watchdog_init+0x0/0x16a() returned -19 after 0 msecs
calling alim7101_wdt_init+0x0/0x194()
alim7101_wdt: Steve Hill <steve@...aho.co.uk>.
alim7101_wdt: ALi M7101 PMU not present - WDT not set
initcall alim7101_wdt_init+0x0/0x194() returned -16 after 6 msecs
initcall alim7101_wdt_init+0x0/0x194() returned with error code -16
calling sc520_wdt_init+0x0/0xe9()
sc520_wdt: cannot register miscdev on minor=130 (err=-16)
initcall sc520_wdt_init+0x0/0xe9() returned -16 after 3 msecs
initcall sc520_wdt_init+0x0/0xe9() returned with error code -16
calling ibwdt_init+0x0/0x5f()
ib700wdt: WDT driver for IB700 single board computer initialising.
PM: Adding info for platform:ib700wdt
ib700wdt: START method I/O 443 is not available.
ib700wdt: probe of ib700wdt failed with error -5
initcall ibwdt_init+0x0/0x5f() returned 0 after 12 msecs
calling watchdog_init+0x0/0x2b4()
ohci_hcd 0000:00:02.0: auto-stop root hub
initcall watchdog_init+0x0/0x2b4() returned -19 after 0 msecs
calling sc1200wdt_init+0x0/0x23f()
sc1200wdt: build 20020303
sc1200wdt: io parameter must be specified
initcall sc1200wdt_init+0x0/0x23f() returned -22 after 3 msecs
initcall sc1200wdt_init+0x0/0x23f() returned with error code -22
calling pc87413_init+0x0/0x91()
pc87413 WDT: Version 1.1 at io 0x2E
pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
initcall pc87413_init+0x0/0x91() returned -16 after 6 msecs
initcall pc87413_init+0x0/0x91() returned with error code -16
calling sbc60xxwdt_init+0x0/0x17d()
sbc60xxwdt: I/O address 0x0443 already in use
initcall sbc60xxwdt_init+0x0/0x17d() returned -5 after 3 msecs
initcall sbc60xxwdt_init+0x0/0x17d() returned with error code -5
calling sbc8360_init+0x0/0x19e()
sbc8360: failed to register misc device
initcall sbc8360_init+0x0/0x19e() returned -16 after 3 msecs
initcall sbc8360_init+0x0/0x19e() returned with error code -16
calling wdt_init+0x0/0x193()
w83697hf/hg WDT: WDT driver for W83697HF/HG initializing
w83697hf/hg WDT: Looking for watchdog at address 0x2e
w83697hf/hg WDT: watchdog not found at address 0x2e
w83697hf/hg WDT: No W83697HF/HG could be found
initcall wdt_init+0x0/0x193() returned -5 after 12 msecs
initcall wdt_init+0x0/0x193() returned with error code -5
calling watchdog_init+0x0/0xb5()
SoftDog: cannot register miscdev on minor=130 (err=-16)
initcall watchdog_init+0x0/0xb5() returned -16 after 3 msecs
initcall watchdog_init+0x0/0xb5() returned with error code -16
calling telephony_init+0x0/0x4c()
Linux telephony interface: v1.00
initcall telephony_init+0x0/0x4c() returned 0 after 3 msecs
calling cpufreq_stats_init+0x0/0x6e()
initcall cpufreq_stats_init+0x0/0x6e() returned 0 after 0 msecs
calling cpufreq_gov_userspace_init+0x0/0x12()
initcall cpufreq_gov_userspace_init+0x0/0x12() returned 0 after 0 msecs
calling cpufreq_gov_dbs_init+0x0/0x12()
initcall cpufreq_gov_dbs_init+0x0/0x12() returned 0 after 0 msecs
calling sdio_uart_init+0x0/0xf5()
initcall sdio_uart_init+0x0/0xf5() returned 0 after 0 msecs
calling mmc_spi_init+0x0/0x12()
initcall mmc_spi_init+0x0/0x12() returned 0 after 0 msecs
calling memstick_init+0x0/0x7c()
initcall memstick_init+0x0/0x7c() returned 0 after 0 msecs
calling tifm_ms_init+0x0/0x12()
initcall tifm_ms_init+0x0/0x12() returned 0 after 0 msecs
calling timer_trig_init+0x0/0x12()
initcall timer_trig_init+0x0/0x12() returned 0 after 0 msecs
calling hifn_init+0x0/0xae()
Driver for HIFN 795x crypto accelerator chip has been successfully registered.
initcall hifn_init+0x0/0xae() returned 0 after 3 msecs
calling ioat_init_module+0x0/0x1b()
initcall ioat_init_module+0x0/0x1b() returned 0 after 0 msecs
calling dca_init+0x0/0xb()
initcall dca_init+0x0/0xb() returned 0 after 0 msecs
calling hid_init+0x0/0x8()
initcall hid_init+0x0/0x8() returned 0 after 0 msecs
calling hid_init+0x0/0x51()
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0x51() returned 0 after 3 msecs
calling usb_mouse_init+0x0/0x38()
usbcore: registered new interface driver usbmouse
usbmouse: v1.6:USB HID Boot Protocol mouse driver
initcall usb_mouse_init+0x0/0x38() returned 0 after 6 msecs
calling flow_cache_init+0x0/0x10f()
initcall flow_cache_init+0x0/0x10f() returned 0 after 0 msecs
calling nf_conntrack_standalone_init+0x0/0x7d()
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
initcall nf_conntrack_standalone_init+0x0/0x7d() returned 0 after 3 msecs
calling nf_conntrack_proto_dccp_init+0x0/0x43()
initcall nf_conntrack_proto_dccp_init+0x0/0x43() returned 0 after 0 msecs
calling nf_conntrack_proto_sctp_init+0x0/0x5d()
initcall nf_conntrack_proto_sctp_init+0x0/0x5d() returned 0 after 0 msecs
calling nf_conntrack_proto_udplite_init+0x0/0x43()
initcall nf_conntrack_proto_udplite_init+0x0/0x43() returned 0 after 0 msecs
calling nf_conntrack_ftp_init+0x0/0x1a2()
initcall nf_conntrack_ftp_init+0x0/0x1a2() returned 0 after 0 msecs
calling nf_conntrack_h323_init+0x0/0xa1()
initcall nf_conntrack_h323_init+0x0/0xa1() returned 0 after 0 msecs
calling xt_init+0x0/0xe3()
initcall xt_init+0x0/0xe3() returned 0 after 0 msecs
calling tcpudp_mt_init+0x0/0x17()
initcall tcpudp_mt_init+0x0/0x17() returned 0 after 0 msecs
calling classify_tg_init+0x0/0x17()
initcall classify_tg_init+0x0/0x17() returned 0 after 0 msecs
calling mark_tg_init+0x0/0x17()
initcall mark_tg_init+0x0/0x17() returned 0 after 0 msecs
calling nfqueue_tg_init+0x0/0x17()
initcall nfqueue_tg_init+0x0/0x17() returned 0 after 0 msecs
calling xt_rateest_tg_init+0x0/0x3f()
initcall xt_rateest_tg_init+0x0/0x3f() returned 0 after 0 msecs
calling secmark_tg_init+0x0/0x17()
initcall secmark_tg_init+0x0/0x17() returned 0 after 0 msecs
calling tcpmss_tg_init+0x0/0x17()
initcall tcpmss_tg_init+0x0/0x17() returned 0 after 0 msecs
calling comment_mt_init+0x0/0x17()
initcall comment_mt_init+0x0/0x17() returned 0 after 0 msecs
calling conntrack_mt_init+0x0/0x17()
initcall conntrack_mt_init+0x0/0x17() returned 0 after 0 msecs
calling dccp_mt_init+0x0/0x54()
initcall dccp_mt_init+0x0/0x54() returned 0 after 0 msecs
calling dscp_mt_init+0x0/0x17()
initcall dscp_mt_init+0x0/0x17() returned 0 after 0 msecs
calling iprange_mt_init+0x0/0x17()
initcall iprange_mt_init+0x0/0x17() returned 0 after 0 msecs
calling limit_mt_init+0x0/0x17()
initcall limit_mt_init+0x0/0x17() returned 0 after 0 msecs
calling mac_mt_init+0x0/0x17()
initcall mac_mt_init+0x0/0x17() returned 0 after 0 msecs
calling quota_mt_init+0x0/0x17()
initcall quota_mt_init+0x0/0x17() returned 0 after 0 msecs
calling xt_rateest_mt_init+0x0/0x17()
initcall xt_rateest_mt_init+0x0/0x17() returned 0 after 0 msecs
calling statistic_mt_init+0x0/0x17()
initcall statistic_mt_init+0x0/0x17() returned 0 after 0 msecs
calling string_mt_init+0x0/0x17()
initcall string_mt_init+0x0/0x17() returned 0 after 0 msecs
calling time_mt_init+0x0/0x17()
initcall time_mt_init+0x0/0x17() returned 0 after 0 msecs
calling ipip_init+0x0/0x71()
IPv4 over IPv4 tunneling driver
PM: Adding info for No Bus:tunl0
initcall ipip_init+0x0/0x71() returned 0 after 6 msecs
calling init_syncookies+0x0/0x19()
initcall init_syncookies+0x0/0x19() returned 0 after 0 msecs
calling ah4_init+0x0/0x68()
initcall ah4_init+0x0/0x68() returned 0 after 0 msecs
calling esp4_init+0x0/0x68()
initcall esp4_init+0x0/0x68() returned 0 after 0 msecs
calling tunnel4_init+0x0/0x32()
initcall tunnel4_init+0x0/0x32() returned 0 after 0 msecs
calling xfrm4_mode_tunnel_init+0x0/0x17()
initcall xfrm4_mode_tunnel_init+0x0/0x17() returned 0 after 0 msecs
calling ipv4_netfilter_init+0x0/0x12()
initcall ipv4_netfilter_init+0x0/0x12() returned 0 after 0 msecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x146()
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x146() returned 0 after 0 msecs
calling ip_tables_init+0x0/0xaf()
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xaf() returned 0 after 3 msecs
calling recent_mt_init+0x0/0x8b()
initcall recent_mt_init+0x0/0x8b() returned 0 after 0 msecs
calling log_tg_init+0x0/0x29()
initcall log_tg_init+0x0/0x29() returned 0 after 0 msecs
calling arp_tables_init+0x0/0x8d()
arp_tables: (C) 2002 David S. Miller
initcall arp_tables_init+0x0/0x8d() returned 0 after 3 msecs
calling arptable_filter_init+0x0/0x44()
initcall arptable_filter_init+0x0/0x44() returned 0 after 0 msecs
calling ip_queue_init+0x0/0x116()
initcall ip_queue_init+0x0/0x116() returned 0 after 0 msecs
calling bictcp_register+0x0/0x12()
TCP bic registered
initcall bictcp_register+0x0/0x12() returned 0 after 0 msecs
calling tcp_westwood_register+0x0/0x12()
TCP westwood registered
initcall tcp_westwood_register+0x0/0x12() returned 0 after 3 msecs
calling hstcp_register+0x0/0x12()
TCP highspeed registered
initcall hstcp_register+0x0/0x12() returned 0 after 0 msecs
calling htcp_register+0x0/0x12()
TCP htcp registered
initcall htcp_register+0x0/0x12() returned 0 after 0 msecs
calling tcp_vegas_register+0x0/0x14()
TCP vegas registered
initcall tcp_vegas_register+0x0/0x14() returned 0 after 3 msecs
calling tcp_scalable_register+0x0/0x12()
TCP scalable registered
initcall tcp_scalable_register+0x0/0x12() returned 0 after 3 msecs
calling tcp_lp_register+0x0/0x12()
TCP lp registered
initcall tcp_lp_register+0x0/0x12() returned 0 after 0 msecs
calling tcp_yeah_register+0x0/0x14()
TCP yeah registered
initcall tcp_yeah_register+0x0/0x14() returned 0 after 3 msecs
calling xfrm_user_init+0x0/0x58()
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x58() returned 0 after 3 msecs
calling packet_init+0x0/0x47()
NET: Registered protocol family 17
initcall packet_init+0x0/0x47() returned 0 after 0 msecs
calling ipsec_pfkey_init+0x0/0x8c()
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x8c() returned 0 after 3 msecs
calling x25_init+0x0/0x5a()
NET: Registered protocol family 9
X.25 for Linux Version 0.2
initcall x25_init+0x0/0x5a() returned 0 after 6 msecs
calling lapb_init+0x0/0x8()
initcall lapb_init+0x0/0x8() returned 0 after 0 msecs
calling can_init+0x0/0x111()
can: controller area network core (rev 20071116 abi 8)
NET: Registered protocol family 29
initcall can_init+0x0/0x111() returned 0 after 6 msecs
calling bcm_module_init+0x0/0x68()
can: broadcast manager protocol (rev 20080415)
initcall bcm_module_init+0x0/0x68() returned 0 after 3 msecs
calling irlan_init+0x0/0x23d()
PM: Adding info for No Bus:irlan0
initcall irlan_init+0x0/0x23d() returned 0 after 3 msecs
calling ircomm_init+0x0/0x9a()
IrCOMM protocol (Dag Brattli)
initcall ircomm_init+0x0/0x9a() returned 0 after 0 msecs
calling ircomm_tty_init+0x0/0x137()
PM: Adding info for No Bus:ircomm0
PM: Adding info for No Bus:ircomm1
PM: Adding info for No Bus:ircomm2
PM: Adding info for No Bus:ircomm3
PM: Adding info for No Bus:ircomm4
PM: Adding info for No Bus:ircomm5
PM: Adding info for No Bus:ircomm6
PM: Adding info for No Bus:ircomm7
PM: Adding info for No Bus:ircomm8
PM: Adding info for No Bus:ircomm9
PM: Adding info for No Bus:ircomm10
PM: Adding info for No Bus:ircomm11
PM: Adding info for No Bus:ircomm12
PM: Adding info for No Bus:ircomm13
PM: Adding info for No Bus:ircomm14
PM: Adding info for No Bus:ircomm15
PM: Adding info for No Bus:ircomm16
PM: Adding info for No Bus:ircomm17
PM: Adding info for No Bus:ircomm18
PM: Adding info for No Bus:ircomm19
PM: Adding info for No Bus:ircomm20
PM: Adding info for No Bus:ircomm21
PM: Adding info for No Bus:ircomm22
PM: Adding info for No Bus:ircomm23
PM: Adding info for No Bus:ircomm24
PM: Adding info for No Bus:ircomm25
PM: Adding info for No Bus:ircomm26
PM: Adding info for No Bus:ircomm27
PM: Adding info for No Bus:ircomm28
PM: Adding info for No Bus:ircomm29
PM: Adding info for No Bus:ircomm30
PM: Adding info for No Bus:ircomm31
initcall ircomm_tty_init+0x0/0x137() returned 0 after 101 msecs
calling init_sunrpc+0x0/0x58()
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
initcall init_sunrpc+0x0/0x58() returned 0 after 6 msecs
calling init_rpcsec_gss+0x0/0x38()
initcall init_rpcsec_gss+0x0/0x38() returned 0 after 0 msecs
calling init_kerberos_module+0x0/0x2f()
initcall init_kerberos_module+0x0/0x2f() returned 0 after 0 msecs
calling init_spkm3_module+0x0/0x2f()
initcall init_spkm3_module+0x0/0x2f() returned 0 after 0 msecs
calling af_rxrpc_init+0x0/0x19c()
NET: Registered protocol family 33
initcall af_rxrpc_init+0x0/0x19c() returned 0 after 3 msecs
calling decnet_init+0x0/0x8b()
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 56Kbytes
NET: Registered protocol family 12
initcall decnet_init+0x0/0x8b() returned 0 after 9 msecs
calling vlan_proto_init+0x0/0xb7()
802.1Q VLAN Support v1.8 Ben Greear <greearb@...delatech.com>
All bugs added by David S. Miller <davem@...hat.com>
initcall vlan_proto_init+0x0/0xb7() returned 0 after 6 msecs
calling sctp_init+0x0/0x717()
SCTP: Hash tables configured (established 21845 bind 18724)
initcall sctp_init+0x0/0x717() returned 0 after 28 msecs
calling ieee80211_init+0x0/0xb3()
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@...ux.intel.com>
initcall ieee80211_init+0x0/0xb3() returned 0 after 6 msecs
calling ieee80211_crypto_init+0x0/0x12()
ieee80211_crypt: registered algorithm 'NULL'
initcall ieee80211_crypto_init+0x0/0x12() returned 0 after 3 msecs
calling ieee80211_crypto_wep_init+0x0/0x12()
ieee80211_crypt: registered algorithm 'WEP'
initcall ieee80211_crypto_wep_init+0x0/0x12() returned 0 after 3 msecs
calling ieee80211_crypto_tkip_init+0x0/0x12()
ieee80211_crypt: registered algorithm 'TKIP'
initcall ieee80211_crypto_tkip_init+0x0/0x12() returned 0 after 3 msecs
calling rfkill_handler_init+0x0/0x12()
initcall rfkill_handler_init+0x0/0x12() returned 0 after 0 msecs
calling init_p9+0x0/0x1b()
Installing 9P2000 support
initcall init_p9+0x0/0x1b() returned 0 after 0 msecs
calling p9_trans_fd_init+0x0/0x93()
initcall p9_trans_fd_init+0x0/0x93() returned 0 after 0 msecs
calling acpi_cpufreq_init+0x0/0x8a()
initcall acpi_cpufreq_init+0x0/0x8a() returned -19 after 3 msecs
calling hpet_insert_resource+0x0/0x23()
initcall hpet_insert_resource+0x0/0x23() returned 1 after 0 msecs
initcall hpet_insert_resource+0x0/0x23() returned with error code 1
calling lapic_insert_resource+0x0/0x40()
initcall lapic_insert_resource+0x0/0x40() returned 0 after 0 msecs
calling init_lapic_nmi_sysfs+0x0/0x38()
initcall init_lapic_nmi_sysfs+0x0/0x38() returned 0 after 0 msecs
calling ioapic_insert_resources+0x0/0x4f()
initcall ioapic_insert_resources+0x0/0x4f() returned 0 after 0 msecs
calling sched_init_debug+0x0/0x24()
initcall sched_init_debug+0x0/0x24() returned 0 after 0 msecs
calling __stack_chk_test+0x0/0x3e()
Testing -fstack-protector-all feature
No -fstack-protector-stack-frame!
-fstack-protector-all test failed
initcall __stack_chk_test+0x0/0x3e() returned 0 after 9 msecs
calling init_oops_id+0x0/0x23()
initcall init_oops_id+0x0/0x23() returned 0 after 0 msecs
calling disable_boot_consoles+0x0/0x3a()
initcall disable_boot_consoles+0x0/0x3a() returned 0 after 0 msecs
calling pm_qos_power_init+0x0/0x61()
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
initcall pm_qos_power_init+0x0/0x61() returned 0 after 9 msecs
calling software_resume+0x0/0x1b6()
initcall software_resume+0x0/0x1b6() returned -2 after 0 msecs
initcall software_resume+0x0/0x1b6() returned with error code -2
calling fail_page_alloc_debugfs+0x0/0xe4()
initcall fail_page_alloc_debugfs+0x0/0xe4() returned 0 after 0 msecs
calling failslab_debugfs+0x0/0x6c()
initcall failslab_debugfs+0x0/0x6c() returned 0 after 0 msecs
calling afs_init+0x0/0x115()
kAFS: Red Hat AFS client v0.1 registering.
initcall afs_init+0x0/0x115() returned 0 after 3 msecs
calling fail_make_request_debugfs+0x0/0x19()
initcall fail_make_request_debugfs+0x0/0x19() returned 0 after 0 msecs
calling random32_reseed+0x0/0x2a()
initcall random32_reseed+0x0/0x2a() returned 0 after 0 msecs
calling pci_sysfs_init+0x0/0x4c()
initcall pci_sysfs_init+0x0/0x4c() returned 0 after 0 msecs
calling acpi_wakeup_device_init+0x0/0xb1()
initcall acpi_wakeup_device_init+0x0/0xb1() returned 0 after 0 msecs
calling acpi_sleep_proc_init+0x0/0x33()
initcall acpi_sleep_proc_init+0x0/0x33() returned 0 after 0 msecs
calling seqgen_init+0x0/0xf()
initcall seqgen_init+0x0/0xf() returned 0 after 0 msecs
calling late_resume_init+0x0/0xda()
Magic number: 8:380:335
hash matches device eql
hash matches device tty56
initcall late_resume_init+0x0/0xda() returned 0 after 6 msecs
calling scsi_complete_async_scans+0x0/0x10e()
initcall scsi_complete_async_scans+0x0/0x10e() returned 0 after 0 msecs
calling edd_init+0x0/0x2eb()
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
initcall edd_init+0x0/0x2eb() returned 0 after 6 msecs
calling tcp_congestion_default+0x0/0x12()
initcall tcp_congestion_default+0x0/0x12() returned 0 after 0 msecs
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
debug: unmapping init memory ffffffff80c07000..ffffffff80c58000
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
usb usb2: uevent
usb 2-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
udev: renamed network interface eth1 to eth0
udev: renamed network interface eth0_rename to eth1
eth0: link down
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.26-rc1-sched-devel.git-x86-latest.git #76
-------------------------------------------------------
multipath.stati/2972 is trying to acquire lock:
(&ecryptfs_daemon_hash_mux){--..}, at: [<ffffffff80321745>] ecryptfs_miscdev_open+0x23/0x13b
but task is already holding lock:
(misc_mtx){--..}, at: [<ffffffff8043da31>] misc_open+0x22/0xf0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (misc_mtx){--..}:
[<ffffffff80249821>] __lock_acquire+0xa0d/0xb86
[<ffffffff80249a33>] lock_acquire+0x99/0xc6
[<ffffffff80825684>] mutex_lock_nested+0x9b/0x1f9
[<ffffffff8043db29>] misc_register+0x2a/0x129
[<ffffffff803215f7>] ecryptfs_init_ecryptfs_miscdev+0x2d/0x5c
[<ffffffff803211bf>] ecryptfs_init_messaging+0x250/0x26d
[<ffffffff80c1795c>] ecryptfs_init+0x1ac/0x1c5
[<ffffffff80c0788e>] kernel_init+0xa1/0x1de
[<ffffffff8020bff8>] child_rip+0xa/0x12
[<ffffffffffffffff>] 0xffffffffffffffff
-> #0 (&ecryptfs_daemon_hash_mux){--..}:
[<ffffffff80249713>] __lock_acquire+0x8ff/0xb86
[<ffffffff80249a33>] lock_acquire+0x99/0xc6
[<ffffffff80825684>] mutex_lock_nested+0x9b/0x1f9
[<ffffffff80321745>] ecryptfs_miscdev_open+0x23/0x13b
[<ffffffff8043dad6>] misc_open+0xc7/0xf0
[<ffffffff80284ada>] chrdev_open+0x124/0x145
[<ffffffff80280763>] __dentry_open+0x10b/0x210
[<ffffffff80280896>] nameidata_to_filp+0x2e/0x40
[<ffffffff8028ccf2>] do_filp_open+0x3e3/0x841
[<ffffffff80280567>] do_sys_open+0x55/0xfc
[<ffffffff80280637>] sys_open+0x1b/0x1d
[<ffffffff8020b36a>] system_call_after_swapgs+0x8a/0x8f
[<ffffffffffffffff>] 0xffffffffffffffff
other info that might help us debug this:
1 lock held by multipath.stati/2972:
#0: (misc_mtx){--..}, at: [<ffffffff8043da31>] misc_open+0x22/0xf0
stack backtrace:
Pid: 2972, comm: multipath.stati Not tainted 2.6.26-rc1-sched-devel.git-x86-latest.git #76
Call Trace:
[<ffffffff80247dec>] print_circular_bug_tail+0x70/0x7b
[<ffffffff80249713>] __lock_acquire+0x8ff/0xb86
[<ffffffff80321745>] ? ecryptfs_miscdev_open+0x23/0x13b
[<ffffffff80249a33>] lock_acquire+0x99/0xc6
[<ffffffff80321745>] ? ecryptfs_miscdev_open+0x23/0x13b
[<ffffffff80321745>] ? ecryptfs_miscdev_open+0x23/0x13b
[<ffffffff80825684>] mutex_lock_nested+0x9b/0x1f9
[<ffffffff80321745>] ecryptfs_miscdev_open+0x23/0x13b
[<ffffffff8043dad6>] misc_open+0xc7/0xf0
[<ffffffff80284ada>] chrdev_open+0x124/0x145
[<ffffffff80826caa>] ? _spin_unlock+0x26/0x2a
[<ffffffff802849b6>] ? chrdev_open+0x0/0x145
[<ffffffff80280763>] __dentry_open+0x10b/0x210
[<ffffffff80280896>] nameidata_to_filp+0x2e/0x40
[<ffffffff8028ccf2>] do_filp_open+0x3e3/0x841
[<ffffffff8028042f>] ? get_unused_fd_flags+0x2d/0x110
[<ffffffff80280503>] ? get_unused_fd_flags+0x101/0x110
[<ffffffff80826caa>] ? _spin_unlock+0x26/0x2a
[<ffffffff80280503>] ? get_unused_fd_flags+0x101/0x110
[<ffffffff80280567>] do_sys_open+0x55/0xfc
[<ffffffff80280637>] sys_open+0x1b/0x1d
[<ffffffff8020b36a>] system_call_after_swapgs+0x8a/0x8f
EXT3 FS on sda6, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs6
PM: Removing info for No Bus:vcs5
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcsa6
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcsa5
PM: Adding info for No Bus:vcs5
PM: Removing info for No Bus:vcs4
PM: Adding info for No Bus:vcsa5
PM: Removing info for No Bus:vcsa4
PM: Adding info for No Bus:vcs4
PM: Removing info for No Bus:vcs6
PM: Removing info for No Bus:vcsa6
PM: Adding info for No Bus:vcs6
PM: Removing info for No Bus:vcs3
PM: Adding info for No Bus:vcsa4
PM: Removing info for No Bus:vcsa3
PM: Adding info for No Bus:vcs3
PM: Removing info for No Bus:vcs1
PM: Adding info for No Bus:vcsa6
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
IOAPIC[0]: Set routing entry (2-18 -> 0x69 -> IRQ 18 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
eth1: too many iterations (6) in nv_nic_irq.
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists