[ 0.000000] Linux version 2.6.24 (root@lpsdm60) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Mon Apr 14 16:06:21 CEST 2008 [ 0.000000] Command line: ro root=/dev/sda3 rhgb quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffcb440 (usable) [ 0.000000] BIOS-e820: 00000000bffcb440 - 00000000bffceac0 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffceac0 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786379) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used [ 0.000000] end_pfn_map = 2359296 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FDFD0, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT BFFCE9C0, 004C (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: FACP BFFCE900, 0084 (r2 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: DSDT BFFCB440, 2C02 (r2 IBM SERVALNT 1000 INTL 20041203) [ 0.000000] ACPI: FACS BFFCE640, 0040 [ 0.000000] ACPI: APIC BFFCE840, 0084 (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: SRAT BFFCE700, 00E8 (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: HPET BFFCE6C0, 0038 (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: MCFG BFFCE680, 003C (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786379) 1 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-240000000 [ 0.000000] Entering add_active_range(0, 0, 154) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786379) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 2359296 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 154 [ 0.000000] 0: 256 -> 786379 [ 0.000000] 0: 1048576 -> 2359296 [ 0.000000] On node 0 totalpages: 2096997 [ 0.000000] DMA zone: 96 pages used for memmap [ 0.000000] DMA zone: 2877 pages reserved [ 0.000000] DMA zone: 1021 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 24480 pages used for memmap [ 0.000000] DMA32 zone: 757803 pages, LIFO batch:31 [ 0.000000] Normal zone: 30720 pages used for memmap [ 0.000000] Normal zone: 1280000 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x588 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 425712 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038824 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=/dev/sda3 rhgb quiet [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 150.233392] time.c: Detected 2327.502 MHz processor. [ 150.235525] Console: colour VGA+ 80x25 [ 150.235532] console [tty0] enabled [ 150.235546] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 150.235548] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 150.235549] ... MAX_LOCK_DEPTH: 30 [ 150.235550] ... MAX_LOCKDEP_KEYS: 2048 [ 150.235551] ... CLASSHASH_SIZE: 1024 [ 150.235552] ... MAX_LOCKDEP_ENTRIES: 8192 [ 150.235553] ... MAX_LOCKDEP_CHAINS: 16384 [ 150.235554] ... CHAINHASH_SIZE: 8192 [ 150.235556] memory used by lock dependency info: 1712 kB [ 150.235557] per task-struct memory footprint: 2160 bytes [ 150.235559] Checking aperture... [ 150.235568] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 150.267666] Placing software IO TLB between 0x123c000 - 0x523c000 [ 150.377395] Memory: 8086092k/9437184k available (2901k kernel code, 301896k reserved, 1534k data, 772k init) [ 150.454897] Calibrating delay using timer specific routine.. 4659.71 BogoMIPS (lpj=9319423) [ 150.454994] Security Framework initialized [ 150.454999] SELinux: Initializing. [ 150.455038] SELinux: Starting in permissive mode [ 150.455045] selinux_register_security: Registering secondary module capability [ 150.455047] Capability LSM initialized as secondary [ 150.455781] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 150.461466] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 150.464252] Mount-cache hash table entries: 256 [ 150.464666] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.464669] CPU: L2 cache: 4096K [ 150.464671] CPU 0/0 -> Node 0 [ 150.464672] using mwait in idle threads. [ 150.464674] CPU: Physical Processor ID: 0 [ 150.464675] CPU: Processor Core ID: 0 [ 150.464681] CPU0: Thermal monitoring enabled (TM2) [ 150.464693] Freeing SMP alternatives: 23k freed [ 150.466328] ACPI: Core revision 20070126 [ 150.508978] Using local APIC timer interrupts. [ 150.551854] APIC timer calibration result 20781273 [ 150.551856] Detected 20.781 MHz APIC timer. [ 150.552215] lockdep: not fixing up alternatives. [ 150.552248] Booting processor 1/4 APIC 0x1 [ 150.562605] Initializing CPU#1 [ 150.639671] Calibrating delay using timer specific routine.. 4655.06 BogoMIPS (lpj=9310136) [ 150.639678] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.639680] CPU: L2 cache: 4096K [ 150.639682] CPU 1/1 -> Node 0 [ 150.639684] CPU: Physical Processor ID: 0 [ 150.639685] CPU: Processor Core ID: 1 [ 150.639691] CPU1: Thermal monitoring enabled (TM2) [ 150.640173] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 150.640200] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 150.660474] lockdep: not fixing up alternatives. [ 150.660504] Booting processor 2/4 APIC 0x6 [ 150.670859] Initializing CPU#2 [ 150.747437] Calibrating delay using timer specific routine.. 4655.11 BogoMIPS (lpj=9310223) [ 150.747444] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.747445] CPU: L2 cache: 4096K [ 150.747448] CPU 2/6 -> Node 0 [ 150.747449] CPU: Physical Processor ID: 3 [ 150.747450] CPU: Processor Core ID: 0 [ 150.747456] CPU2: Thermal monitoring enabled (TM2) [ 150.747926] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 150.747958] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 150.768145] lockdep: not fixing up alternatives. [ 150.768173] Booting processor 3/4 APIC 0x7 [ 150.778528] Initializing CPU#3 [ 150.855202] Calibrating delay using timer specific routine.. 4655.13 BogoMIPS (lpj=9310263) [ 150.855209] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.855211] CPU: L2 cache: 4096K [ 150.855213] CPU 3/7 -> Node 0 [ 150.855215] CPU: Physical Processor ID: 3 [ 150.855216] CPU: Processor Core ID: 1 [ 150.855222] CPU3: Thermal monitoring enabled (TM2) [ 150.855691] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 150.855726] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 150.875704] Brought up 4 CPUs [ 150.875814] CPU0 attaching sched-domain: [ 150.875816] domain 0: span 03 [ 150.875818] groups: 01 02 [ 150.875820] domain 1: span 0f [ 150.875822] groups: 03 0c [ 150.875824] domain 2: span 0f [ 150.875825] groups: 0f [ 150.875827] CPU1 attaching sched-domain: [ 150.875829] domain 0: span 03 [ 150.875830] groups: 02 01 [ 150.875832] domain 1: span 0f [ 150.875833] groups: 03 0c [ 150.875836] domain 2: span 0f [ 150.875837] groups: 0f [ 150.875839] CPU2 attaching sched-domain: [ 150.875840] domain 0: span 0c [ 150.875841] groups: 04 08 [ 150.875844] domain 1: span 0f [ 150.875845] groups: 0c 03 [ 150.875847] domain 2: span 0f [ 150.875848] groups: 0f [ 150.875850] CPU3 attaching sched-domain: [ 150.875851] domain 0: span 0c [ 150.875853] groups: 08 04 [ 150.875855] domain 1: span 0f [ 150.875856] groups: 0c 03 [ 150.875859] domain 2: span 0f [ 150.875860] groups: 0f [ 150.876382] khelper used greatest stack depth: 6032 bytes left [ 150.876533] net_namespace: 152 bytes [ 150.877118] NET: Registered protocol family 16 [ 150.877534] ACPI: bus type pci registered [ 150.879062] PCI: Using MMCONFIG at e0000000 - e25fffff [ 150.882239] ACPI: EC: Look up EC in DSDT [ 150.884299] ACPI: Interpreter enabled [ 150.884301] ACPI: (supports S0 S5) [ 150.884309] ACPI: Using IOAPIC for interrupt routing [ 150.887955] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 150.902921] PCI: Transparent bridge - 0000:00:1e.0 [ 150.902956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 150.903204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI6._PRT] [ 150.903272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI7._PRT] [ 150.903364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT] [ 150.903415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 150.903479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC2B._PRT] [ 150.908995] ACPI: PCI Interrupt Link [LP00] (IRQs *3) [ 150.909121] ACPI: PCI Interrupt Link [LP01] (IRQs *10) [ 150.909243] ACPI: PCI Interrupt Link [LP02] (IRQs *3) [ 150.909365] ACPI: PCI Interrupt Link [LP03] (IRQs *7) [ 150.909487] ACPI: PCI Interrupt Link [LP04] (IRQs *7) [ 150.909571] ACPI: Blank IRQ resource [ 150.909572] ACPI: Resource is not an IRQ entry [ 150.909668] ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled. [ 150.909791] ACPI: PCI Interrupt Link [LP06] (IRQs *11) [ 150.909913] ACPI: PCI Interrupt Link [LP07] (IRQs *5) [ 150.910080] Linux Plug and Play Support v0.97 (c) Adam Belay [ 150.910136] pnp: PnP ACPI init [ 150.910154] ACPI: bus type pnp registered [ 150.921472] pnp: PnP ACPI: found 11 devices [ 150.921475] ACPI: ACPI bus type pnp unregistered [ 150.921753] usbcore: registered new interface driver usbfs [ 150.921860] usbcore: registered new interface driver hub [ 150.921945] usbcore: registered new device driver usb [ 150.922151] PCI: Using ACPI for IRQ routing [ 150.922153] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 150.931189] PCI-GART: No AMD northbridge found. [ 150.935141] Time: tsc clocksource has been installed. [ 150.935152] Switched to high resolution mode on CPU 0 [ 150.935713] Switched to high resolution mode on CPU 1 [ 150.935990] Switched to high resolution mode on CPU 3 [ 150.935997] Switched to high resolution mode on CPU 2 [ 150.947195] system 00:01: ioport range 0x520-0x53f has been reserved [ 150.947199] system 00:01: ioport range 0x540-0x547 has been reserved [ 150.947214] system 00:08: ioport range 0xca8-0xca8 has been reserved [ 150.947217] system 00:08: ioport range 0xcac-0xcac has been reserved [ 150.947226] system 00:09: ioport range 0x400-0x43f has been reserved [ 150.947229] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 150.947232] system 00:09: ioport range 0x540-0x55f could not be reserved [ 150.947235] system 00:09: ioport range 0x560-0x57f has been reserved [ 150.947237] system 00:09: ioport range 0x580-0x5ff has been reserved [ 150.947240] system 00:09: ioport range 0x800-0x80f has been reserved [ 150.947243] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved [ 150.947246] system 00:09: iomem range 0xfecc0000-0xfecc3fff has been reserved [ 150.947249] system 00:09: iomem range 0xfe000000-0xfe01ffff has been reserved [ 150.947251] system 00:09: iomem range 0xfe020000-0xfe6fffff has been reserved [ 150.947254] system 00:09: iomem range 0xfe700400-0xfebfffff has been reserved [ 150.947257] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 150.948298] PCI: Bridge: 0000:1b:00.0 [ 150.948300] IO window: disabled. [ 150.948372] MEM window: disabled. [ 150.948463] PREFETCH window: disabled. [ 150.948556] PCI: Bridge: 0000:1b:01.0 [ 150.948600] IO window: 6000-6fff [ 150.948693] MEM window: cc000000-cdefffff [ 150.948738] PREFETCH window: c2000000-c20fffff [ 150.948830] PCI: Bridge: 0000:1a:00.0 [ 150.948875] IO window: 6000-6fff [ 150.948967] MEM window: cc000000-cdefffff [ 150.949013] PREFETCH window: c2000000-c20fffff [ 150.949104] PCI: Bridge: 0000:1a:00.3 [ 150.949105] IO window: disabled. [ 150.949196] MEM window: disabled. [ 150.949242] PREFETCH window: disabled. [ 150.949333] PCI: Bridge: 0000:00:02.0 [ 150.949335] IO window: 6000-6fff [ 150.949337] MEM window: cc000000-cdefffff [ 150.949340] PREFETCH window: c2000000-c20fffff [ 150.949343] PCI: Bridge: 0000:00:03.0 [ 150.949345] IO window: 5000-5fff [ 150.949347] MEM window: ce000000-cfffffff [ 150.949350] PREFETCH window: cdf00000-cdffffff [ 150.949352] PCI: Bridge: 0000:00:04.0 [ 150.949354] IO window: 8000-ffff [ 150.949356] MEM window: disabled. [ 150.949358] PREFETCH window: disabled. [ 150.949361] PCI: Bridge: 0000:00:05.0 [ 150.949362] IO window: disabled. [ 150.949364] MEM window: disabled. [ 150.949366] PREFETCH window: disabled. [ 150.949370] PCI: Bridge: 0000:00:06.0 [ 150.949371] IO window: 7000-7fff [ 150.949374] MEM window: ca000000-cbffffff [ 150.949376] PREFETCH window: c2100000-c21fffff [ 150.949379] PCI: Bridge: 0000:00:07.0 [ 150.949380] IO window: disabled. [ 150.949383] MEM window: disabled. [ 150.949384] PREFETCH window: disabled. [ 150.949387] PCI: Bridge: 0000:00:1c.0 [ 150.949388] IO window: disabled. [ 150.949391] MEM window: disabled. [ 150.949394] PREFETCH window: disabled. [ 150.949397] PCI: Bridge: 0000:00:1c.1 [ 150.949398] IO window: disabled. [ 150.949402] MEM window: disabled. [ 150.949404] PREFETCH window: disabled. [ 150.949408] PCI: Bridge: 0000:00:1e.0 [ 150.949410] IO window: 3000-4fff [ 150.949414] MEM window: de000000-dfffffff [ 150.949416] PREFETCH window: d0000000-ddffffff [ 150.949429] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 150.949747] PCI: Setting latency timer of device 0000:1a:00.0 to 64 [ 150.950158] PCI: Setting latency timer of device 0000:1b:00.0 to 64 [ 150.950538] ACPI: PCI Interrupt 0000:1b:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 150.950616] PCI: Setting latency timer of device 0000:1b:01.0 to 64 [ 150.950983] PCI: Setting latency timer of device 0000:1a:00.3 to 64 [ 150.951034] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 150.951041] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 150.951048] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 150.951055] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 150.951063] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 150.951088] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 150.951092] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 150.951113] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 150.951117] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 150.951125] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 150.951209] NET: Registered protocol family 2 [ 150.995375] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 150.997224] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 151.002800] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 151.005753] TCP: Hash tables configured (established 524288 bind 65536) [ 151.005783] TCP reno registered [ 151.015289] checking if image is initramfs... it is [ 151.079962] Freeing initrd memory: 955k freed [ 151.081408] udev used greatest stack depth: 5424 bytes left [ 151.091737] VDSO: variable vdso_jiffies broken [ 151.091739] VDSO: variable vdso_vgetcpu_mode broken [ 151.091741] VDSO: variable vdso_vsyscall_gtod_data broken [ 151.092871] audit: initializing netlink socket (disabled) [ 151.092915] audit(1210180041.777:1): initialized [ 151.093856] Total HugeTLB memory allocated, 0 [ 151.094235] VFS: Disk quotas dquot_6.5.1 [ 151.094296] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 151.095044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 151.095054] io scheduler noop registered [ 151.095057] io scheduler anticipatory registered [ 151.095059] io scheduler deadline registered [ 151.095103] io scheduler cfq registered (default) [ 151.097696] Boot video device is 0000:01:06.0 [ 151.098186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 151.101701] ACPI: Processor [CPU0] (supports 8 throttling states) [ 151.101836] ACPI: Processor [CPU1] (supports 8 throttling states) [ 151.101932] ACPI: Processor [CPU2] (supports 8 throttling states) [ 151.102022] ACPI: Processor [CPU3] (supports 8 throttling states) [ 151.126018] Real Time Clock Driver v1.12ac [ 151.127800] intel_rng: FWH not detected [ 151.128747] Linux agpgart interface v0.102 [ 151.129792] [drm] Initialized drm 1.1.0 20060810 [ 151.129795] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 151.390541] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 151.392994] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 151.400368] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 151.400385] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 151.400389] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 151.408743] Probing IDE interface ide0... [ 151.972849] Probing IDE interface ide1... [ 153.166439] hdc: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, ATAPI CD/DVD-ROM drive [ 153.166527] ide1 at 0x170-0x177,0x376 on irq 15 [ 153.169765] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 153.169771] Uniform CD-ROM driver Revision: 3.20 [ 153.179298] ide-floppy driver 0.99.newide [ 153.182119] PNP: No PS/2 controller found. Probing ports directly. [ 153.433815] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 153.434069] mice: PS/2 mouse device common for all mice [ 153.833016] usbcore: registered new interface driver hiddev [ 153.833166] usbcore: registered new interface driver usbhid [ 153.833169] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 153.833960] oprofile: using NMI interrupt. [ 153.834032] TCP cubic registered [ 153.834034] Initializing XFRM netlink socket [ 153.834073] NET: Registered protocol family 1 [ 153.834098] NET: Registered protocol family 17 [ 153.836814] Freeing unused kernel memory: 772k freed [ 153.877163] udevstart used greatest stack depth: 5256 bytes left [ 153.883935] SCSI subsystem initialized [ 153.886558] Driver 'sd' needs updating - please use bus_type methods [ 153.888346] Adaptec aacraid driver 1.1-5[2449]-ms [ 153.889145] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 153.889152] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 154.117135] AAC0: kernel 5.2-0[11844] Mar 21 2007 [ 154.117137] AAC0: monitor 5.2-0[11844] [ 154.117139] AAC0: bios 5.2-0[11844] [ 154.117141] AAC0: serial 5889140 [ 154.117142] AAC0: 64bit support enabled. [ 154.117144] AAC0: 64 Bit DAC enabled [ 154.124394] scsi0 : ServeRAID [ 154.124987] scsi 0:0:0:0: Direct-Access ServeRA DISK1 V1.0 PQ: 0 ANSI: 2 [ 154.125977] sd 0:0:0:0: [sda] 1432576000 512-byte hardware sectors (733479 MB) [ 154.126004] sd 0:0:0:0: [sda] Write Protect is off [ 154.126006] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 [ 154.126054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 154.126248] sd 0:0:0:0: [sda] 1432576000 512-byte hardware sectors (733479 MB) [ 154.126272] sd 0:0:0:0: [sda] Write Protect is off [ 154.126274] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 [ 154.126333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 154.126337] sda: sda1 sda2 sda3 sda4 [ 154.131999] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 154.156308] scsi 0:1:0:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.161625] scsi 0:1:1:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.167318] scsi 0:1:2:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.173865] scsi 0:1:3:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.179265] scsi 0:1:4:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.185832] scsi 0:1:5:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.264049] scsi 0:3:0:0: Enclosure IBM-ESXS VSC7160 1.06 PQ: 0 ANSI: 3 [ 154.409459] insmod used greatest stack depth: 3384 bytes left [ 154.475181] kjournald starting. Commit interval 5 seconds [ 154.475327] EXT3-fs: mounted filesystem with ordered data mode. [ 154.636844] SELinux: Disabled at runtime. [ 154.636856] audit(1210180045.328:2): selinux=0 auid=4294967295 [ 157.670539] warning: process `kmodule' used the deprecated sysctl system call with 1.23. [ 161.120479] floppy0: no floppy controllers found [ 161.215515] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 161.215519] Copyright (c) 1999-2006 Intel Corporation. [ 161.216469] ACPI: PCI Interrupt 0000:24:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 161.216555] PCI: Setting latency timer of device 0000:24:00.0 to 64 [ 161.267109] e1000: 0000:24:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:52 [ 161.334936] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.335253] ACPI: PCI Interrupt 0000:24:00.1[B] -> GSI 18 (level, low) -> IRQ 18 [ 161.335335] PCI: Setting latency timer of device 0000:24:00.1 to 64 [ 161.411433] e1000: 0000:24:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:53 [ 161.482521] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.482572] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 161.482583] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 161.527299] e1000: 0000:07:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:d6 [ 161.598258] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.598293] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 161.598303] PCI: Setting latency timer of device 0000:07:00.1 to 64 [ 161.642907] e1000: 0000:07:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:d7 [ 161.710040] e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.797880] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 161.849023] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 20 [ 161.890166] USB Universal Host Controller Interface driver v3.0 [ 161.892838] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 161.892850] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 161.892853] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 161.899737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 161.899774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002200 [ 161.908075] usb usb1: configuration #1 chosen from 1 choice [ 161.911822] hub 1-0:1.0: USB hub found [ 161.911872] hub 1-0:1.0: 2 ports detected [ 162.014889] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 162.014900] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 162.014904] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 162.022513] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 162.022548] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002600 [ 162.035503] usb usb2: configuration #1 chosen from 1 choice [ 162.038899] hub 2-0:1.0: USB hub found [ 162.038922] hub 2-0:1.0: 2 ports detected [ 162.157972] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 162.157984] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 162.157988] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 162.165290] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 162.165319] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00002a00 [ 162.172820] usb usb3: configuration #1 chosen from 1 choice [ 162.177334] hub 3-0:1.0: USB hub found [ 162.177348] hub 3-0:1.0: 2 ports detected [ 162.299404] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 22 [ 162.299415] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 162.299418] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 162.309726] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 162.309758] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002e00 [ 162.345037] usb usb4: configuration #1 chosen from 1 choice [ 162.358555] hub 4-0:1.0: USB hub found [ 162.358575] hub 4-0:1.0: 2 ports detected [ 162.541203] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 162.626661] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 162.628631] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 162.628639] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 162.651412] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 162.655344] ehci_hcd 0000:00:1d.7: debug port 1 [ 162.655350] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 162.655360] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9000000 [ 162.672901] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 162.706045] usb usb5: configuration #1 chosen from 1 choice [ 162.717385] hub 5-0:1.0: USB hub found [ 162.717400] hub 5-0:1.0: 8 ports detected [ 162.905993] md: Autodetecting RAID arrays. [ 162.905996] md: Scanned 0 and added 0 devices. [ 162.905998] md: autorun ... [ 162.905999] md: ... autorun DONE. [ 163.075997] usb 3-1: device not accepting address 2, error -71 [ 163.607308] usb 3-1: new full speed USB device using uhci_hcd and address 4 [ 163.776740] usb 3-1: configuration #1 chosen from 1 choice [ 163.786503] input: IBM IBM RSA2 as /class/input/input0 [ 164.106338] input: USB HID v1.10 Keyboard [IBM IBM RSA2] on usb-0000:00:1d.2-1 [ 164.114799] input: IBM IBM RSA2 as /class/input/input1 [ 164.380806] input: USB HID v1.10 Mouse [IBM IBM RSA2] on usb-0000:00:1d.2-1 [ 164.649716] input: Power Button (FF) as /class/input/input2 [ 164.729052] ACPI: Power Button (FF) [PWRF] [ 207.609481] EXT3 FS on sda3, internal journal [ 207.646492] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 207.919236] kjournald starting. Commit interval 5 seconds [ 207.925411] EXT3 FS on sda1, internal journal [ 207.925424] EXT3-fs: mounted filesystem with ordered data mode. [ 208.103601] Adding 8008392k swap on /dev/sda2. Priority:-1 extents:1 across:8008392k [ 208.351081] IA-32 Microcode Update Driver: v1.14a [ 208.870594] e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 223.329382] RPC: Registered udp transport module. [ 223.329387] RPC: Registered tcp transport module. [ 223.470828] nfs: Unknown parameter `ra_factor' [ 223.544526] nfs: Unknown parameter `ra_factor' [ 223.594703] nfs: Unknown parameter `ra_factor' [ 223.638051] nfs: Unknown parameter `ra_factor' [ 223.703851] nfs: Unknown parameter `ra_factor' [ 223.763759] nfs: Unknown parameter `ra_factor' [ 223.823425] nfs: Unknown parameter `ra_factor' [ 223.883197] nfs: Unknown parameter `ra_factor' [ 223.943213] nfs: Unknown parameter `ra_factor' [ 224.002952] nfs: Unknown parameter `ra_factor' [ 224.062771] nfs: Unknown parameter `ra_factor' [ 224.122763] nfs: Unknown parameter `ra_factor' [ 224.182674] nfs: Unknown parameter `ra_factor' [ 224.232334] nfs: Unknown parameter `ra_factor' [ 224.274563] nfs: Unknown parameter `ra_factor' [ 224.332084] nfs: Unknown parameter `ra_factor' [ 234.021035] nfs: Unknown parameter `ra_factor' [ 234.062111] nfs: Unknown parameter `ra_factor' [ 234.076928] nfs: Unknown parameter `ra_factor' [ 234.088525] nfs: Unknown parameter `ra_factor' [ 234.100184] nfs: Unknown parameter `ra_factor' [ 234.111889] nfs: Unknown parameter `ra_factor' [ 234.123291] nfs: Unknown parameter `ra_factor' [ 234.134733] nfs: Unknown parameter `ra_factor' [ 234.147059] nfs: Unknown parameter `ra_factor' [ 235.067973] nfs: Unknown parameter `ra_factor' [ 235.079306] nfs: Unknown parameter `ra_factor' [ 235.089936] nfs: Unknown parameter `ra_factor' [ 235.102150] nfs: Unknown parameter `ra_factor' [ 235.113481] nfs: Unknown parameter `ra_factor' [ 235.124935] nfs: Unknown parameter `ra_factor' [ 235.136267] nfs: Unknown parameter `ra_factor' [ 235.147845] nfs: Unknown parameter `ra_factor' [ 235.159026] nfs: Unknown parameter `ra_factor'