| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1210389129-3868-3-git-send-email-jacliburn@bellsouth.net>
Date: Fri, 9 May 2008 22:12:07 -0500
From: Jay Cliburn <jacliburn@...lsouth.net>
To: jeff@...zik.org
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
csnook@...hat.com, pelle@....su.se,
Jay Cliburn <jacliburn@...lsouth.net>
Subject: [PATCH 2/4] atl1: fix broken suspend and resume
Fix atl1_suspend() and atl1_resume() so they actually work. We'll use
the suspend function for wake-on-lan in addition to just suspending.
Signed-off-by: Jay Cliburn <jacliburn@...lsouth.net>
---
drivers/net/atlx/atl1.c | 125 ++++++++++++++++++++++++++++++-----------------
1 files changed, 80 insertions(+), 45 deletions(-)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 3beb44e..12fb3e5 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2781,64 +2781,93 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
struct atl1_hw *hw = &adapter->hw;
u32 ctrl = 0;
u32 wufc = adapter->wol;
+ u32 val;
+ int retval;
+ u16 speed;
+ u16 duplex;
netif_device_detach(netdev);
if (netif_running(netdev))
atl1_down(adapter);
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
- if (ctrl & BMSR_LSTATUS)
+ val = ctrl & BMSR_LSTATUS;
+ if (val)
wufc &= ~ATLX_WUFC_LNKC;
- /* reduce speed to 10/100M */
- if (wufc) {
- atl1_phy_enter_power_saving(hw);
- /* if resume, let driver to re- setup link */
- hw->phy_configured = false;
- atl1_set_mac_addr(hw);
- atlx_set_multi(netdev);
+ if (val && wufc) {
+ val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
+ if (val) {
+ if (netif_msg_ifdown(adapter))
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "error getting speed/duplex\n");
+ goto disable_wol;
+ }
ctrl = 0;
- /* turn on magic packet wol */
- if (wufc & ATLX_WUFC_MAG)
- ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
- /* turn on Link change WOL */
- if (wufc & ATLX_WUFC_LNKC)
- ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
+ /* enable magic packet WOL */
+ if (wufc & ATLX_WUFC_MAG)
+ ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
-
- /* turn on all-multi mode if wake on multicast is enabled */
- ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL);
- ctrl &= ~MAC_CTRL_DBG;
- ctrl &= ~MAC_CTRL_PROMIS_EN;
- if (wufc & ATLX_WUFC_MC)
- ctrl |= MAC_CTRL_MC_ALL_EN;
- else
- ctrl &= ~MAC_CTRL_MC_ALL_EN;
-
- /* turn on broadcast mode if wake on-BC is enabled */
- if (wufc & ATLX_WUFC_BC)
+ ioread32(hw->hw_addr + REG_WOL_CTRL);
+
+ /* configure the mac */
+ ctrl = MAC_CTRL_RX_EN;
+ ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 :
+ MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT);
+ if (duplex == FULL_DUPLEX)
+ ctrl |= MAC_CTRL_DUPLX;
+ ctrl |= (((u32)adapter->hw.preamble_len &
+ MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
+ if (adapter->vlgrp)
+ ctrl |= MAC_CTRL_RMV_VLAN;
+ if (wufc & ATLX_WUFC_MAG)
ctrl |= MAC_CTRL_BC_EN;
- else
- ctrl &= ~MAC_CTRL_BC_EN;
-
- /* enable RX */
- ctrl |= MAC_CTRL_RX_EN;
iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- } else {
- iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
+ ioread32(hw->hw_addr + REG_MAC_CTRL);
+
+ /* poke the PHY */
+ ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
+ ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+ goto exit;
}
- pci_save_state(pdev);
+ if (!val && wufc) {
+ ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
+ iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
+ ioread32(hw->hw_addr + REG_WOL_CTRL);
+ iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
+ ioread32(hw->hw_addr + REG_MAC_CTRL);
+ hw->phy_configured = false;
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+ goto exit;
+ }
+
+disable_wol:
+ iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
+ ioread32(hw->hw_addr + REG_WOL_CTRL);
+ ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
+ ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+ atl1_phy_enter_power_saving(hw);
+ hw->phy_configured = false;
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+exit:
+ if (netif_running(netdev))
+ pci_disable_msi(adapter->pdev);
pci_disable_device(pdev);
-
- pci_set_power_state(pdev, PCI_D3hot);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
@@ -2852,20 +2881,26 @@ static int atl1_resume(struct pci_dev *pdev)
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- /* FIXME: check and handle */
err = pci_enable_device(pdev);
+ if (err) {
+ if (netif_msg_ifup(adapter))
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "error enabling pci device\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+ iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
- iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
- atl1_reset(adapter);
+ atl1_reset_hw(&adapter->hw);
+ adapter->cmb.cmb->int_stats = 0;
if (netif_running(netdev))
atl1_up(adapter);
netif_device_attach(netdev);
- atl1_via_workaround(adapter);
-
return 0;
}
#else
--
1.5.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists