| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200805110030.15510.yhlu.kernel@gmail.com>
Date: Sun, 11 May 2008 00:30:15 -0700
From: Yinghai Lu <yhlu.kernel@...il.com>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86: make e820.c to have common functions
remove the duplicated copy of these functions.
Signed-off-by: Yinghai Lu <yhlu.kernel@...il.com>
arch/x86/kernel/Makefile | 2
arch/x86/kernel/e820.c | 475 +++++++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/e820_32.c | 411 --------------------------------------
arch/x86/kernel/e820_64.c | 444 ------------------------------------------
arch/x86/kernel/setup_32.c | 2
include/asm-x86/e820.h | 14 +
include/asm-x86/e820_32.h | 12 -
include/asm-x86/e820_64.h | 12 -
8 files changed, 496 insertions(+), 876 deletions(-)
Index: linux-2.6/arch/x86/kernel/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/kernel/Makefile
+++ linux-2.6/arch/x86/kernel/Makefile
@@ -31,7 +31,7 @@ obj-y += setup_$(BITS).o i8259_$(BITS)
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
-obj-y += bootflag.o e820_$(BITS).o
+obj-y += bootflag.o e820_$(BITS).o e820.o
obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
obj-y += alternative.o i8253.o pci-nommu.o
obj-$(CONFIG_X86_64) += bugs_64.o
Index: linux-2.6/arch/x86/kernel/e820_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/e820_32.c
+++ linux-2.6/arch/x86/kernel/e820_32.c
@@ -16,21 +16,6 @@
#include <asm/e820.h>
#include <asm/setup.h>
-struct e820map e820;
-struct change_member {
- struct e820entry *pbios; /* pointer to original bios entry */
- unsigned long long addr; /* address for this change point */
-};
-static struct change_member change_point_list[2*E820MAX] __initdata;
-static struct change_member *change_point[2*E820MAX] __initdata;
-static struct e820entry *overlap_list[E820MAX] __initdata;
-static struct e820entry new_bios[E820MAX] __initdata;
-/* For PCI or other memory-mapped resources */
-unsigned long pci_mem_start = 0x10000000;
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_mem_start);
-#endif
-
static struct resource system_rom_resource = {
.name = "System ROM",
.start = 0xf0000,
@@ -254,223 +239,6 @@ void __init e820_mark_nosave_regions(voi
}
#endif
-void __init add_memory_region(unsigned long long start,
- unsigned long long size, int type)
-{
- int x;
-
- x = e820.nr_map;
-
- if (x == E820MAX) {
- printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
- return;
- }
-
- e820.map[x].addr = start;
- e820.map[x].size = size;
- e820.map[x].type = type;
- e820.nr_map++;
-} /* add_memory_region */
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries. The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
-{
- struct change_member *change_tmp;
- unsigned long current_type, last_type;
- unsigned long long last_addr;
- int chgidx, still_changing;
- int overlap_entries;
- int new_bios_entry;
- int old_nr, new_nr, chg_nr;
- int i;
-
- /*
- Visually we're performing the following (1,2,3,4 = memory types)...
-
- Sample memory map (w/overlaps):
- ____22__________________
- ______________________4_
- ____1111________________
- _44_____________________
- 11111111________________
- ____________________33__
- ___________44___________
- __________33333_________
- ______________22________
- ___________________2222_
- _________111111111______
- _____________________11_
- _________________4______
-
- Sanitized equivalent (no overlap):
- 1_______________________
- _44_____________________
- ___1____________________
- ____22__________________
- ______11________________
- _________1______________
- __________3_____________
- ___________44___________
- _____________33_________
- _______________2________
- ________________1_______
- _________________4______
- ___________________2____
- ____________________33__
- ______________________4_
- */
- /* if there's only one memory region, don't bother */
- if (*pnr_map < 2) {
- return -1;
- }
-
- old_nr = *pnr_map;
-
- /* bail out if we find any unreasonable addresses in bios map */
- for (i=0; i<old_nr; i++)
- if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) {
- return -1;
- }
-
- /* create pointers for initial change-point information (for sorting) */
- for (i=0; i < 2*old_nr; i++)
- change_point[i] = &change_point_list[i];
-
- /* record all known change-points (starting and ending addresses),
- omitting those that are for empty memory regions */
- chgidx = 0;
- for (i=0; i < old_nr; i++) {
- if (biosmap[i].size != 0) {
- change_point[chgidx]->addr = biosmap[i].addr;
- change_point[chgidx++]->pbios = &biosmap[i];
- change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
- change_point[chgidx++]->pbios = &biosmap[i];
- }
- }
- chg_nr = chgidx; /* true number of change-points */
-
- /* sort change-point list by memory addresses (low -> high) */
- still_changing = 1;
- while (still_changing) {
- still_changing = 0;
- for (i=1; i < chg_nr; i++) {
- /* if <current_addr> > <last_addr>, swap */
- /* or, if current=<start_addr> & last=<end_addr>, swap */
- if ((change_point[i]->addr < change_point[i-1]->addr) ||
- ((change_point[i]->addr == change_point[i-1]->addr) &&
- (change_point[i]->addr == change_point[i]->pbios->addr) &&
- (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
- )
- {
- change_tmp = change_point[i];
- change_point[i] = change_point[i-1];
- change_point[i-1] = change_tmp;
- still_changing=1;
- }
- }
- }
-
- /* create a new bios memory map, removing overlaps */
- overlap_entries=0; /* number of entries in the overlap table */
- new_bios_entry=0; /* index for creating new bios map entries */
- last_type = 0; /* start with undefined memory type */
- last_addr = 0; /* start with 0 as last starting address */
- /* loop through change-points, determining affect on the new bios map */
- for (chgidx=0; chgidx < chg_nr; chgidx++)
- {
- /* keep track of all overlapping bios entries */
- if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
- {
- /* add map entry to overlap list (> 1 entry implies an overlap) */
- overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
- }
- else
- {
- /* remove entry from list (order independent, so swap with last) */
- for (i=0; i<overlap_entries; i++)
- {
- if (overlap_list[i] == change_point[chgidx]->pbios)
- overlap_list[i] = overlap_list[overlap_entries-1];
- }
- overlap_entries--;
- }
- /* if there are overlapping entries, decide which "type" to use */
- /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
- current_type = 0;
- for (i=0; i<overlap_entries; i++)
- if (overlap_list[i]->type > current_type)
- current_type = overlap_list[i]->type;
- /* continue building up new bios map based on this information */
- if (current_type != last_type) {
- if (last_type != 0) {
- new_bios[new_bios_entry].size =
- change_point[chgidx]->addr - last_addr;
- /* move forward only if the new size was non-zero */
- if (new_bios[new_bios_entry].size != 0)
- if (++new_bios_entry >= E820MAX)
- break; /* no more space left for new bios entries */
- }
- if (current_type != 0) {
- new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
- new_bios[new_bios_entry].type = current_type;
- last_addr=change_point[chgidx]->addr;
- }
- last_type = current_type;
- }
- }
- new_nr = new_bios_entry; /* retain count for new bios entries */
-
- /* copy new bios mapping into original location */
- memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
- *pnr_map = new_nr;
-
- return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory. If we aren't, we'll fake a memory map.
- *
- * We check to see that the memory map contains at least 2 elements
- * before we'll use it, because the detection code in setup.S may
- * not be perfect and most every PC known to man has two memory
- * regions: one from 0 to 640k, and one from 1mb up. (The IBM
- * thinkpad 560x, for example, does not cooperate with the memory
- * detection code.)
- */
-int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
- /* Only one memory region (or negative)? Ignore it */
- if (nr_map < 2)
- return -1;
-
- do {
- u64 start = biosmap->addr;
- u64 size = biosmap->size;
- u64 end = start + size;
- u32 type = biosmap->type;
-
- /* Overflow in 64 bits? Ignore the memory map. */
- if (start > end)
- return -1;
-
- add_memory_region(start, size, type);
- } while (biosmap++, --nr_map);
-
- return 0;
-}
-
/*
* Find the highest page frame number we have available
*/
@@ -535,86 +303,12 @@ void __init register_bootmem_low_pages(u
}
}
-void __init e820_register_memory(void)
-{
- unsigned long gapstart, gapsize, round;
- unsigned long long last;
- int i;
-
- /*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space.
- */
- last = 0x100000000ull;
- gapstart = 0x10000000;
- gapsize = 0x400000;
- i = e820.nr_map;
- while (--i >= 0) {
- unsigned long long start = e820.map[i].addr;
- unsigned long long end = start + e820.map[i].size;
-
- /*
- * Since "last" is at most 4GB, we know we'll
- * fit in 32 bits if this condition is true
- */
- if (last > end) {
- unsigned long gap = last - end;
-
- if (gap > gapsize) {
- gapsize = gap;
- gapstart = end;
- }
- }
- if (start < last)
- last = start;
- }
-
- /*
- * See how much we want to round up: start off with
- * rounding to the next 1MB area.
- */
- round = 0x100000;
- while ((gapsize >> 4) > round)
- round += round;
- /* Fun with two's complement */
- pci_mem_start = (gapstart + round) & -round;
-
- printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
- pci_mem_start, gapstart, gapsize);
-}
-
-static void __init print_memory_map(char *who)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- printk(" %s: %016Lx - %016Lx ", who,
- e820.map[i].addr,
- e820.map[i].addr + e820.map[i].size);
- switch (e820.map[i].type) {
- case E820_RAM: printk("(usable)\n");
- break;
- case E820_RESERVED:
- printk("(reserved)\n");
- break;
- case E820_ACPI:
- printk("(ACPI data)\n");
- break;
- case E820_NVS:
- printk("(ACPI NVS)\n");
- break;
- default: printk("type %u\n", e820.map[i].type);
- break;
- }
- }
-}
-
void __init limit_regions(unsigned long long size)
{
unsigned long long current_addr;
int i;
- print_memory_map("limit_regions start");
+ e820_print_map("limit_regions start");
for (i = 0; i < e820.nr_map; i++) {
current_addr = e820.map[i].addr + e820.map[i].size;
if (current_addr < size)
@@ -633,62 +327,10 @@ void __init limit_regions(unsigned long
e820.nr_map = i + 1;
e820.map[i].size -= current_addr - size;
}
- print_memory_map("limit_regions endfor");
+ e820_print_map("limit_regions endfor");
return;
}
- print_memory_map("limit_regions endfunc");
-}
-
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(u64 start, u64 end, unsigned type)
-{
- int i;
- for (i = 0; i < e820.nr_map; i++) {
- const struct e820entry *ei = &e820.map[i];
- if (type && ei->type != type)
- continue;
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
- return 1;
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
- /*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init
-e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
-{
- u64 start = s;
- u64 end = e;
- int i;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- if (type && ei->type != type)
- continue;
- /* is the region (part) in overlap with the current region ?*/
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
- /* if the region is at the beginning of <start,end> we move
- * start to the end of the region since it's ok until there
- */
- if (ei->addr <= start)
- start = ei->addr + ei->size;
- /* if start is now at or beyond end, we're done, full
- * coverage */
- if (start >= end)
- return 1; /* we're done */
- }
- return 0;
+ e820_print_map("limit_regions endfunc");
}
/* Overridden in paravirt.c if CONFIG_PARAVIRT */
@@ -700,7 +342,7 @@ char * __init __attribute__((weak)) memo
void __init setup_memory_map(void)
{
printk(KERN_INFO "BIOS-provided physical RAM map:\n");
- print_memory_map(memory_setup());
+ e820_print_map(memory_setup());
}
static int __initdata user_defined_memmap;
@@ -783,55 +425,12 @@ static int __init parse_memmap(char *arg
return 0;
}
early_param("memmap", parse_memmap);
-u64 __init update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type)
-{
- int i;
- u64 real_updated_size = 0;
-
- BUG_ON(old_type == new_type);
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- u64 final_start, final_end;
- if (ei->type != old_type)
- continue;
- /* totally covered? */
- if (ei->addr >= start &&
- (ei->addr + ei->size) <= (start + size)) {
- ei->type = new_type;
- real_updated_size += ei->size;
- continue;
- }
- /* partially covered */
- final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
- if (final_start >= final_end)
- continue;
- add_memory_region(final_start, final_end - final_start,
- new_type);
- real_updated_size += final_end - final_start;
- }
-
- return real_updated_size;
-}
void __init finish_e820_parsing(void)
{
if (user_defined_memmap) {
printk(KERN_INFO "user-defined physical RAM map:\n");
- print_memory_map("user");
+ e820_print_map("user");
}
}
-void __init update_e820(void)
-{
- u8 nr_map;
-
- nr_map = e820.nr_map;
- if (sanitize_e820_map(e820.map, &nr_map))
- return;
- e820.nr_map = nr_map;
- printk(KERN_INFO "modified physical RAM map:\n");
- print_memory_map("modified");
-}
Index: linux-2.6/arch/x86/kernel/e820_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/e820_64.c
+++ linux-2.6/arch/x86/kernel/e820_64.c
@@ -30,8 +30,6 @@
#include <asm/kdebug.h>
#include <asm/trampoline.h>
-struct e820map e820;
-
/*
* PFN of last memory page.
*/
@@ -177,62 +175,6 @@ again:
}
return changed;
}
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(unsigned long start, unsigned long end, unsigned type)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
-
- if (type && ei->type != type)
- continue;
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
- return 1;
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
-/*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
-
- if (type && ei->type != type)
- continue;
- /* is the region (part) in overlap with the current region ?*/
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
-
- /* if the region is at the beginning of <start,end> we move
- * start to the end of the region since it's ok until there
- */
- if (ei->addr <= start)
- start = ei->addr + ei->size;
- /*
- * if start is now at or beyond end, we're done, full
- * coverage
- */
- if (start >= end)
- return 1;
- }
- return 0;
-}
/*
* Find a free area with specified alignment in a specific range.
@@ -436,24 +378,6 @@ e820_register_active_regions(int nid, un
}
/*
- * Add a memory region to the kernel e820 map.
- */
-void __init add_memory_region(unsigned long start, unsigned long size, int type)
-{
- int x = e820.nr_map;
-
- if (x == E820MAX) {
- printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
- return;
- }
-
- e820.map[x].addr = start;
- e820.map[x].size = size;
- e820.map[x].type = type;
- e820.nr_map++;
-}
-
-/*
* Find the hole size (in bytes) in the memory range.
* @start: starting address of the memory range to scan
* @end: ending address of the memory range to scan
@@ -474,266 +398,6 @@ unsigned long __init e820_hole_size(unsi
return end - start - (ram << PAGE_SHIFT);
}
-static void __init e820_print_map(char *who)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
- (unsigned long long) e820.map[i].addr,
- (unsigned long long)
- (e820.map[i].addr + e820.map[i].size));
- switch (e820.map[i].type) {
- case E820_RAM:
- printk(KERN_CONT "(usable)\n");
- break;
- case E820_RESERVED:
- printk(KERN_CONT "(reserved)\n");
- break;
- case E820_ACPI:
- printk(KERN_CONT "(ACPI data)\n");
- break;
- case E820_NVS:
- printk(KERN_CONT "(ACPI NVS)\n");
- break;
- default:
- printk(KERN_CONT "type %u\n", e820.map[i].type);
- break;
- }
- }
-}
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries. The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map)
-{
- struct change_member {
- struct e820entry *pbios; /* pointer to original bios entry */
- unsigned long long addr; /* address for this change point */
- };
- static struct change_member change_point_list[2*E820MAX] __initdata;
- static struct change_member *change_point[2*E820MAX] __initdata;
- static struct e820entry *overlap_list[E820MAX] __initdata;
- static struct e820entry new_bios[E820MAX] __initdata;
- struct change_member *change_tmp;
- unsigned long current_type, last_type;
- unsigned long long last_addr;
- int chgidx, still_changing;
- int overlap_entries;
- int new_bios_entry;
- int old_nr, new_nr, chg_nr;
- int i;
-
- /*
- Visually we're performing the following
- (1,2,3,4 = memory types)...
-
- Sample memory map (w/overlaps):
- ____22__________________
- ______________________4_
- ____1111________________
- _44_____________________
- 11111111________________
- ____________________33__
- ___________44___________
- __________33333_________
- ______________22________
- ___________________2222_
- _________111111111______
- _____________________11_
- _________________4______
-
- Sanitized equivalent (no overlap):
- 1_______________________
- _44_____________________
- ___1____________________
- ____22__________________
- ______11________________
- _________1______________
- __________3_____________
- ___________44___________
- _____________33_________
- _______________2________
- ________________1_______
- _________________4______
- ___________________2____
- ____________________33__
- ______________________4_
- */
-
- /* if there's only one memory region, don't bother */
- if (*pnr_map < 2)
- return -1;
-
- old_nr = *pnr_map;
-
- /* bail out if we find any unreasonable addresses in bios map */
- for (i = 0; i < old_nr; i++)
- if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
- return -1;
-
- /* create pointers for initial change-point information (for sorting) */
- for (i = 0; i < 2 * old_nr; i++)
- change_point[i] = &change_point_list[i];
-
- /* record all known change-points (starting and ending addresses),
- omitting those that are for empty memory regions */
- chgidx = 0;
- for (i = 0; i < old_nr; i++) {
- if (biosmap[i].size != 0) {
- change_point[chgidx]->addr = biosmap[i].addr;
- change_point[chgidx++]->pbios = &biosmap[i];
- change_point[chgidx]->addr = biosmap[i].addr +
- biosmap[i].size;
- change_point[chgidx++]->pbios = &biosmap[i];
- }
- }
- chg_nr = chgidx;
-
- /* sort change-point list by memory addresses (low -> high) */
- still_changing = 1;
- while (still_changing) {
- still_changing = 0;
- for (i = 1; i < chg_nr; i++) {
- unsigned long long curaddr, lastaddr;
- unsigned long long curpbaddr, lastpbaddr;
-
- curaddr = change_point[i]->addr;
- lastaddr = change_point[i - 1]->addr;
- curpbaddr = change_point[i]->pbios->addr;
- lastpbaddr = change_point[i - 1]->pbios->addr;
-
- /*
- * swap entries, when:
- *
- * curaddr > lastaddr or
- * curaddr == lastaddr and curaddr == curpbaddr and
- * lastaddr != lastpbaddr
- */
- if (curaddr < lastaddr ||
- (curaddr == lastaddr && curaddr == curpbaddr &&
- lastaddr != lastpbaddr)) {
- change_tmp = change_point[i];
- change_point[i] = change_point[i-1];
- change_point[i-1] = change_tmp;
- still_changing = 1;
- }
- }
- }
-
- /* create a new bios memory map, removing overlaps */
- overlap_entries = 0; /* number of entries in the overlap table */
- new_bios_entry = 0; /* index for creating new bios map entries */
- last_type = 0; /* start with undefined memory type */
- last_addr = 0; /* start with 0 as last starting address */
-
- /* loop through change-points, determining affect on the new bios map */
- for (chgidx = 0; chgidx < chg_nr; chgidx++) {
- /* keep track of all overlapping bios entries */
- if (change_point[chgidx]->addr ==
- change_point[chgidx]->pbios->addr) {
- /*
- * add map entry to overlap list (> 1 entry
- * implies an overlap)
- */
- overlap_list[overlap_entries++] =
- change_point[chgidx]->pbios;
- } else {
- /*
- * remove entry from list (order independent,
- * so swap with last)
- */
- for (i = 0; i < overlap_entries; i++) {
- if (overlap_list[i] ==
- change_point[chgidx]->pbios)
- overlap_list[i] =
- overlap_list[overlap_entries-1];
- }
- overlap_entries--;
- }
- /*
- * if there are overlapping entries, decide which
- * "type" to use (larger value takes precedence --
- * 1=usable, 2,3,4,4+=unusable)
- */
- current_type = 0;
- for (i = 0; i < overlap_entries; i++)
- if (overlap_list[i]->type > current_type)
- current_type = overlap_list[i]->type;
- /*
- * continue building up new bios map based on this
- * information
- */
- if (current_type != last_type) {
- if (last_type != 0) {
- new_bios[new_bios_entry].size =
- change_point[chgidx]->addr - last_addr;
- /*
- * move forward only if the new size
- * was non-zero
- */
- if (new_bios[new_bios_entry].size != 0)
- /*
- * no more space left for new
- * bios entries ?
- */
- if (++new_bios_entry >= E820MAX)
- break;
- }
- if (current_type != 0) {
- new_bios[new_bios_entry].addr =
- change_point[chgidx]->addr;
- new_bios[new_bios_entry].type = current_type;
- last_addr = change_point[chgidx]->addr;
- }
- last_type = current_type;
- }
- }
- /* retain count for new bios entries */
- new_nr = new_bios_entry;
-
- /* copy new bios mapping into original location */
- memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
- *pnr_map = new_nr;
-
- return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory. If we aren't, we'll fake a memory map.
- */
-static int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
- /* Only one memory region (or negative)? Ignore it */
- if (nr_map < 2)
- return -1;
-
- do {
- u64 start = biosmap->addr;
- u64 size = biosmap->size;
- u64 end = start + size;
- u32 type = biosmap->type;
-
- /* Overflow in 64 bits? Ignore the memory map. */
- if (start > end)
- return -1;
-
- add_memory_region(start, size, type);
- } while (biosmap++, --nr_map);
- return 0;
-}
-
static void early_panic(char *msg)
{
early_printk(msg);
@@ -830,114 +494,6 @@ void __init finish_e820_parsing(void)
}
}
-u64 __init update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type)
-{
- int i;
- u64 real_updated_size = 0;
-
- BUG_ON(old_type == new_type);
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- u64 final_start, final_end;
- if (ei->type != old_type)
- continue;
- /* totally covered? */
- if (ei->addr >= start &&
- (ei->addr + ei->size) <= (start + size)) {
- ei->type = new_type;
- real_updated_size += ei->size;
- continue;
- }
- /* partially covered */
- final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
- if (final_start >= final_end)
- continue;
- add_memory_region(final_start, final_end - final_start,
- new_type);
- real_updated_size += final_end - final_start;
- }
- return real_updated_size;
-}
-
-void __init update_e820(void)
-{
- u8 nr_map;
-
- nr_map = e820.nr_map;
- if (sanitize_e820_map(e820.map, &nr_map))
- return;
- e820.nr_map = nr_map;
- printk(KERN_INFO "modified physical RAM map:\n");
- e820_print_map("modified");
-}
-
-unsigned long pci_mem_start = 0xaeedbabe;
-EXPORT_SYMBOL(pci_mem_start);
-
-/*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space. We pass this space to PCI to assign MMIO resources
- * for hotplug or unconfigured devices in.
- * Hopefully the BIOS let enough space left.
- */
-__init void e820_setup_gap(void)
-{
- unsigned long gapstart, gapsize, round;
- unsigned long last;
- int i;
- int found = 0;
-
- last = 0x100000000ull;
- gapstart = 0x10000000;
- gapsize = 0x400000;
- i = e820.nr_map;
- while (--i >= 0) {
- unsigned long long start = e820.map[i].addr;
- unsigned long long end = start + e820.map[i].size;
-
- /*
- * Since "last" is at most 4GB, we know we'll
- * fit in 32 bits if this condition is true
- */
- if (last > end) {
- unsigned long gap = last - end;
-
- if (gap > gapsize) {
- gapsize = gap;
- gapstart = end;
- found = 1;
- }
- }
- if (start < last)
- last = start;
- }
-
- if (!found) {
- gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
- }
-
- /*
- * See how much we want to round up: start off with
- * rounding to the next 1MB area.
- */
- round = 0x100000;
- while ((gapsize >> 4) > round)
- round += round;
- /* Fun with two's complement */
- pci_mem_start = (gapstart + round) & -round;
-
- printk(KERN_INFO
- "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
- pci_mem_start, gapstart, gapsize);
-}
-
int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
{
int i;
Index: linux-2.6/include/asm-x86/e820.h
===================================================================
--- linux-2.6.orig/include/asm-x86/e820.h
+++ linux-2.6/include/asm-x86/e820.h
@@ -20,6 +20,20 @@ struct e820map {
__u32 nr_map;
struct e820entry map[E820MAX];
};
+
+extern struct e820map e820;
+
+extern int e820_any_mapped(u64 start, u64 end, unsigned type);
+extern int e820_all_mapped(u64 start, u64 end, unsigned type);
+extern void add_memory_region(u64 start, u64 size, int type);
+extern void e820_print_map(char *who);
+extern int sanitize_e820_map(struct e820entry *biosmap, char *pnr_map);
+extern int copy_e820_map(struct e820entry *biosmap, int nr_map);
+extern u64 update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
+extern void update_e820(void);
+extern void e820_setup_gap(void);
+
#endif /* __ASSEMBLY__ */
#define ISA_START_ADDRESS 0xa0000
Index: linux-2.6/include/asm-x86/e820_32.h
===================================================================
--- linux-2.6.orig/include/asm-x86/e820_32.h
+++ linux-2.6/include/asm-x86/e820_32.h
@@ -21,19 +21,8 @@
extern void setup_memory_map(void);
extern void finish_e820_parsing(void);
-extern struct e820map e820;
-extern void update_e820(void);
-
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_any_mapped(u64 start, u64 end, unsigned type);
extern void propagate_e820_map(void);
extern void register_bootmem_low_pages(unsigned long max_low_pfn);
-extern void add_memory_region(unsigned long long start,
- unsigned long long size, int type);
-extern u64 update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
-extern void e820_register_memory(void);
extern void limit_regions(unsigned long long size);
extern void init_iomem_resources(struct resource *code_resource,
struct resource *data_resource,
@@ -47,6 +36,5 @@ static inline void e820_mark_nosave_regi
}
#endif
-
#endif/*!__ASSEMBLY__*/
#endif/*__E820_HEADER*/
Index: linux-2.6/include/asm-x86/e820_64.h
===================================================================
--- linux-2.6.orig/include/asm-x86/e820_64.h
+++ linux-2.6/include/asm-x86/e820_64.h
@@ -19,34 +19,22 @@ extern unsigned long find_e820_area(unsi
extern unsigned long find_e820_area_size(unsigned long start,
unsigned long *sizep,
unsigned long align);
-extern void add_memory_region(unsigned long start, unsigned long size,
- int type);
-extern u64 update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
extern void setup_memory_region(void);
extern void contig_e820_setup(void);
extern unsigned long e820_end_of_ram(void);
extern void e820_reserve_resources(void);
extern void e820_mark_nosave_regions(void);
-extern int e820_any_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
extern int e820_any_non_reserved(unsigned long start, unsigned long end);
extern int is_memory_any_valid(unsigned long start, unsigned long end);
extern int e820_all_non_reserved(unsigned long start, unsigned long end);
extern int is_memory_all_valid(unsigned long start, unsigned long end);
extern unsigned long e820_hole_size(unsigned long start, unsigned long end);
-extern void e820_setup_gap(void);
extern void e820_register_active_regions(int nid, unsigned long start_pfn,
unsigned long end_pfn);
extern void finish_e820_parsing(void);
-extern struct e820map e820;
-extern void update_e820(void);
-
extern void reserve_early(unsigned long start, unsigned long end, char *name);
extern void free_early(unsigned long start, unsigned long end);
extern void early_res_to_bootmem(unsigned long start, unsigned long end);
Index: linux-2.6/arch/x86/kernel/e820.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/kernel/e820.c
@@ -0,0 +1,475 @@
+/*
+ * Handle the memory map.
+ * The functions here do the job until bootmem takes over.
+ *
+ * Getting sanitize_e820_map() in sync with i386 version by applying change:
+ * - Provisions for empty E820 memory regions (reported by certain BIOSes).
+ * Alex Achenbach <xela@...t.de>, December 2002.
+ * Venkatesh Pallipadi <venkatesh.pallipadi@...el.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/kexec.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pfn.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+
+struct e820map e820;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0xaeedbabe;
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
+
+/*
+ * This function checks if any part of the range <start,end> is mapped
+ * with type.
+ */
+int
+e820_any_mapped(u64 start, u64 end, unsigned type)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ if (type && ei->type != type)
+ continue;
+ if (ei->addr >= end || ei->addr + ei->size <= start)
+ continue;
+ return 1;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(e820_any_mapped);
+
+/*
+ * This function checks if the entire range <start,end> is mapped with type.
+ *
+ * Note: this function only works correct if the e820 table is sorted and
+ * not-overlapping, which is the case
+ */
+int __init e820_all_mapped(u64 start, u64 end, unsigned type)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ if (type && ei->type != type)
+ continue;
+ /* is the region (part) in overlap with the current region ?*/
+ if (ei->addr >= end || ei->addr + ei->size <= start)
+ continue;
+
+ /* if the region is at the beginning of <start,end> we move
+ * start to the end of the region since it's ok until there
+ */
+ if (ei->addr <= start)
+ start = ei->addr + ei->size;
+ /*
+ * if start is now at or beyond end, we're done, full
+ * coverage
+ */
+ if (start >= end)
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Add a memory region to the kernel e820 map.
+ */
+void __init add_memory_region(u64 start, u64 size, int type)
+{
+ int x = e820.nr_map;
+
+ if (x == E820MAX) {
+ printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+ return;
+ }
+
+ e820.map[x].addr = start;
+ e820.map[x].size = size;
+ e820.map[x].type = type;
+ e820.nr_map++;
+}
+
+void __init e820_print_map(char *who)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
+ (unsigned long long) e820.map[i].addr,
+ (unsigned long long)
+ (e820.map[i].addr + e820.map[i].size));
+ switch (e820.map[i].type) {
+ case E820_RAM:
+ printk(KERN_CONT "(usable)\n");
+ break;
+ case E820_RESERVED:
+ printk(KERN_CONT "(reserved)\n");
+ break;
+ case E820_ACPI:
+ printk(KERN_CONT "(ACPI data)\n");
+ break;
+ case E820_NVS:
+ printk(KERN_CONT "(ACPI NVS)\n");
+ break;
+ default:
+ printk(KERN_CONT "type %u\n", e820.map[i].type);
+ break;
+ }
+ }
+}
+
+/*
+ * Sanitize the BIOS e820 map.
+ *
+ * Some e820 responses include overlapping entries. The following
+ * replaces the original e820 map with a new one, removing overlaps.
+ *
+ */
+int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map)
+{
+ struct change_member {
+ struct e820entry *pbios; /* pointer to original bios entry */
+ unsigned long long addr; /* address for this change point */
+ };
+ static struct change_member change_point_list[2*E820MAX] __initdata;
+ static struct change_member *change_point[2*E820MAX] __initdata;
+ static struct e820entry *overlap_list[E820MAX] __initdata;
+ static struct e820entry new_bios[E820MAX] __initdata;
+ struct change_member *change_tmp;
+ unsigned long current_type, last_type;
+ unsigned long long last_addr;
+ int chgidx, still_changing;
+ int overlap_entries;
+ int new_bios_entry;
+ int old_nr, new_nr, chg_nr;
+ int i;
+
+ /*
+ Visually we're performing the following
+ (1,2,3,4 = memory types)...
+
+ Sample memory map (w/overlaps):
+ ____22__________________
+ ______________________4_
+ ____1111________________
+ _44_____________________
+ 11111111________________
+ ____________________33__
+ ___________44___________
+ __________33333_________
+ ______________22________
+ ___________________2222_
+ _________111111111______
+ _____________________11_
+ _________________4______
+
+ Sanitized equivalent (no overlap):
+ 1_______________________
+ _44_____________________
+ ___1____________________
+ ____22__________________
+ ______11________________
+ _________1______________
+ __________3_____________
+ ___________44___________
+ _____________33_________
+ _______________2________
+ ________________1_______
+ _________________4______
+ ___________________2____
+ ____________________33__
+ ______________________4_
+ */
+
+ /* if there's only one memory region, don't bother */
+ if (*pnr_map < 2)
+ return -1;
+
+ old_nr = *pnr_map;
+
+ /* bail out if we find any unreasonable addresses in bios map */
+ for (i = 0; i < old_nr; i++)
+ if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
+ return -1;
+
+ /* create pointers for initial change-point information (for sorting) */
+ for (i = 0; i < 2 * old_nr; i++)
+ change_point[i] = &change_point_list[i];
+
+ /* record all known change-points (starting and ending addresses),
+ omitting those that are for empty memory regions */
+ chgidx = 0;
+ for (i = 0; i < old_nr; i++) {
+ if (biosmap[i].size != 0) {
+ change_point[chgidx]->addr = biosmap[i].addr;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ change_point[chgidx]->addr = biosmap[i].addr +
+ biosmap[i].size;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ }
+ }
+ chg_nr = chgidx;
+
+ /* sort change-point list by memory addresses (low -> high) */
+ still_changing = 1;
+ while (still_changing) {
+ still_changing = 0;
+ for (i = 1; i < chg_nr; i++) {
+ unsigned long long curaddr, lastaddr;
+ unsigned long long curpbaddr, lastpbaddr;
+
+ curaddr = change_point[i]->addr;
+ lastaddr = change_point[i - 1]->addr;
+ curpbaddr = change_point[i]->pbios->addr;
+ lastpbaddr = change_point[i - 1]->pbios->addr;
+
+ /*
+ * swap entries, when:
+ *
+ * curaddr > lastaddr or
+ * curaddr == lastaddr and curaddr == curpbaddr and
+ * lastaddr != lastpbaddr
+ */
+ if (curaddr < lastaddr ||
+ (curaddr == lastaddr && curaddr == curpbaddr &&
+ lastaddr != lastpbaddr)) {
+ change_tmp = change_point[i];
+ change_point[i] = change_point[i-1];
+ change_point[i-1] = change_tmp;
+ still_changing = 1;
+ }
+ }
+ }
+
+ /* create a new bios memory map, removing overlaps */
+ overlap_entries = 0; /* number of entries in the overlap table */
+ new_bios_entry = 0; /* index for creating new bios map entries */
+ last_type = 0; /* start with undefined memory type */
+ last_addr = 0; /* start with 0 as last starting address */
+
+ /* loop through change-points, determining affect on the new bios map */
+ for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+ /* keep track of all overlapping bios entries */
+ if (change_point[chgidx]->addr ==
+ change_point[chgidx]->pbios->addr) {
+ /*
+ * add map entry to overlap list (> 1 entry
+ * implies an overlap)
+ */
+ overlap_list[overlap_entries++] =
+ change_point[chgidx]->pbios;
+ } else {
+ /*
+ * remove entry from list (order independent,
+ * so swap with last)
+ */
+ for (i = 0; i < overlap_entries; i++) {
+ if (overlap_list[i] ==
+ change_point[chgidx]->pbios)
+ overlap_list[i] =
+ overlap_list[overlap_entries-1];
+ }
+ overlap_entries--;
+ }
+ /*
+ * if there are overlapping entries, decide which
+ * "type" to use (larger value takes precedence --
+ * 1=usable, 2,3,4,4+=unusable)
+ */
+ current_type = 0;
+ for (i = 0; i < overlap_entries; i++)
+ if (overlap_list[i]->type > current_type)
+ current_type = overlap_list[i]->type;
+ /*
+ * continue building up new bios map based on this
+ * information
+ */
+ if (current_type != last_type) {
+ if (last_type != 0) {
+ new_bios[new_bios_entry].size =
+ change_point[chgidx]->addr - last_addr;
+ /*
+ * move forward only if the new size
+ * was non-zero
+ */
+ if (new_bios[new_bios_entry].size != 0)
+ /*
+ * no more space left for new
+ * bios entries ?
+ */
+ if (++new_bios_entry >= E820MAX)
+ break;
+ }
+ if (current_type != 0) {
+ new_bios[new_bios_entry].addr =
+ change_point[chgidx]->addr;
+ new_bios[new_bios_entry].type = current_type;
+ last_addr = change_point[chgidx]->addr;
+ }
+ last_type = current_type;
+ }
+ }
+ /* retain count for new bios entries */
+ new_nr = new_bios_entry;
+
+ /* copy new bios mapping into original location */
+ memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
+ *pnr_map = new_nr;
+
+ return 0;
+}
+
+/*
+ * Copy the BIOS e820 map into a safe place.
+ *
+ * Sanity-check it while we're at it..
+ *
+ * If we're lucky and live on a modern system, the setup code
+ * will have given us a memory map that we can use to properly
+ * set up memory. If we aren't, we'll fake a memory map.
+ */
+int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
+{
+ /* Only one memory region (or negative)? Ignore it */
+ if (nr_map < 2)
+ return -1;
+
+ do {
+ u64 start = biosmap->addr;
+ u64 size = biosmap->size;
+ u64 end = start + size;
+ u32 type = biosmap->type;
+
+ /* Overflow in 64 bits? Ignore the memory map. */
+ if (start > end)
+ return -1;
+
+ add_memory_region(start, size, type);
+ } while (biosmap++, --nr_map);
+ return 0;
+}
+
+u64 __init update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type)
+{
+ int i;
+ u64 real_updated_size = 0;
+
+ BUG_ON(old_type == new_type);
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ u64 final_start, final_end;
+ if (ei->type != old_type)
+ continue;
+ /* totally covered? */
+ if (ei->addr >= start &&
+ (ei->addr + ei->size) <= (start + size)) {
+ ei->type = new_type;
+ real_updated_size += ei->size;
+ continue;
+ }
+ /* partially covered */
+ final_start = max(start, ei->addr);
+ final_end = min(start + size, ei->addr + ei->size);
+ if (final_start >= final_end)
+ continue;
+ add_memory_region(final_start, final_end - final_start,
+ new_type);
+ real_updated_size += final_end - final_start;
+ }
+ return real_updated_size;
+}
+
+void __init update_e820(void)
+{
+ u8 nr_map;
+
+ nr_map = e820.nr_map;
+ if (sanitize_e820_map(e820.map, &nr_map))
+ return;
+ e820.nr_map = nr_map;
+ printk(KERN_INFO "modified physical RAM map:\n");
+ e820_print_map("modified");
+}
+
+/*
+ * Search for the biggest gap in the low 32 bits of the e820
+ * memory space. We pass this space to PCI to assign MMIO resources
+ * for hotplug or unconfigured devices in.
+ * Hopefully the BIOS let enough space left.
+ */
+__init void e820_setup_gap(void)
+{
+ unsigned long gapstart, gapsize, round;
+ unsigned long long last;
+ int i;
+ int found = 0;
+
+ last = 0x100000000ull;
+ gapstart = 0x10000000;
+ gapsize = 0x400000;
+ i = e820.nr_map;
+ while (--i >= 0) {
+ unsigned long long start = e820.map[i].addr;
+ unsigned long long end = start + e820.map[i].size;
+
+ /*
+ * Since "last" is at most 4GB, we know we'll
+ * fit in 32 bits if this condition is true
+ */
+ if (last > end) {
+ unsigned long gap = last - end;
+
+ if (gap > gapsize) {
+ gapsize = gap;
+ gapstart = end;
+ found = 1;
+ }
+ }
+ if (start < last)
+ last = start;
+ }
+
+#ifdef CONFIG_X86_64
+ if (!found) {
+ gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
+ printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
+ "address range\n"
+ KERN_ERR "PCI: Unassigned devices with 32bit resource "
+ "registers may break!\n");
+ }
+#endif
+
+ /*
+ * See how much we want to round up: start off with
+ * rounding to the next 1MB area.
+ */
+ round = 0x100000;
+ while ((gapsize >> 4) > round)
+ round += round;
+ /* Fun with two's complement */
+ pci_mem_start = (gapstart + round) & -round;
+
+ printk(KERN_INFO
+ "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
+ pci_mem_start, gapstart, gapsize);
+}
+
Index: linux-2.6/arch/x86/kernel/setup_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_32.c
+++ linux-2.6/arch/x86/kernel/setup_32.c
@@ -851,7 +851,7 @@ void __init setup_arch(char **cmdline_p)
get_smp_config();
#endif
- e820_register_memory();
+ e820_setup_gap();
e820_mark_nosave_regions();
#ifdef CONFIG_VT
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists