Linux version 2.6.25.3 (yoshikawatky@hal2) (gcc version 4.2.3 (Debian 4.2.3-3)) #2 SMP Mon May 12 19:43:32 JST 2008 Command line: root=/dev/sda2 ro console=ttyS0,38400 console=tty0 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009a400 (usable) BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff70000 (usable) BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data) BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS) BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) end_pfn_map = 2293760 DMI present. ACPI: RSDP 000F5E30, 0014 (r0 PTLTD ) ACPI: RSDT CFF73C77, 003C (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP CFF77E20, 0074 (r1 INTEL LINDHRST 6040000 PTL 3) ACPI: DSDT CFF7406D, 3DB3 (r1 Intel LINDHRST 6040000 MSFT 100000E) ACPI: FACS CFF78FC0, 0040 ACPI: APIC CFF77E94, 00B4 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT CFF77F48, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SPCR CFF77F70, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: MCFG CFF77FC0, 0040 (r1 PTLTD MCFG 6040000 LTP 0) ACPI: SSDT CFF73CB3, 03BA (r1 PmRef CpuPm 3000 INTL 20030224) No NUMA configuration found Faking a node at 0000000000000000-0000000230000000 Bootmem setup node 0 0000000000000000-0000000230000000 NODE_DATA [0000000000012000 - 0000000000018fff] bootmap [0000000000019000 - 000000000005efff] pages 46 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-601217] TEXT DATA BSS early res: 3 [37ad3000-37fef542] RAMDISK early res: 4 [9a400-9b3ff] EBDA early res: 5 [8000-11fff] PGTABLE Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2293760 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 154 0: 256 -> 851824 0: 1048576 -> 2293760 ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24]) IOAPIC[1]: apic_id 3, address 0xfec81000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48]) IOAPIC[2]: apic_id 4, address 0xfec81400, GSI 48-71 ACPI: IOAPIC (id[0x05] address[0xfec82000] gsi_base[72]) IOAPIC[3]: apic_id 5, address 0xfec82000, GSI 72-95 ACPI: IOAPIC (id[0x08] address[0xfec82400] gsi_base[96]) IOAPIC[4]: apic_id 8, address 0xfec82400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 34200 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064505 Policy zone: Normal Kernel command line: root=/dev/sda2 ro console=ttyS0,38400 console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER time.c: Detected 3200.101 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0xf433000 - 0x13433000 Memory: 8194880k/9175040k available (2116k kernel code, 192744k reserved, 1008k data, 324k init) Calibrating delay using timer specific routine.. 6405.17 BogoMIPS (lpj=12810357) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) ACPI: Core revision 20070126 Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6400.35 BogoMIPS (lpj=12800716) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6400.28 BogoMIPS (lpj=12800565) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6400.36 BogoMIPS (lpj=12800720) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs net_namespace: 1016 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x295-0x296 has been reserved system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1180-0x11bf has been reserved system 00:01: ioport range 0xca2-0xca3 has been reserved system 00:01: ioport range 0xca8-0xcaf has been reserved system 00:01: ioport range 0x900-0x90f has been reserved system 00:01: ioport range 0xfe00-0xfe00 has been reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: 2000-2fff MEM window: 0xd8200000-0xd82fffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.2 IO window: 3000-3fff MEM window: 0xd8300000-0xd83fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: 2000-3fff MEM window: 0xd8100000-0xd83fffff PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: 0x00000000dc000000-0x00000000dfffffff PCI: Bridge: 0000:05:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: 0xd8400000-0xd84fffff PREFETCH window: 0x00000000dc000000-0x00000000dfffffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: 0xd8500000-0xd9ffffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5233k freed Simple Boot Flag at 0x39 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1210610620.007:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /class/input/input0 Freeing unused kernel memory: 324k freed ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 SCSI subsystem initialized ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 32 (level, low) -> IRQ 32 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. Adaptec aacraid driver 1.1-5[2455]-ms Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Floppy drive(s): fd0 is 1.44M ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 FDC 0 is a post-1991 82077 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001440 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001460 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: over-current change on port 1 hub 4-0:1.0: over-current change on port 2 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 33 (level, low) -> IRQ 33 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs ACPI: PCI Interrupt 0000:04:02.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected GSI 54 (level, low) -> IRQ 54 hub 5-0:1.0: over-current change on port 7 hub 5-0:1.0: over-current change on port 8 e1000: 0000:04:02.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2c:f4:d0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:04:02.1[B] -> GSI 55 (level, low) -> IRQ 55 e1000: 0000:04:02.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2c:f4:d1 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ICH5: IDE controller (0x8086:0x24db rev 0x02) at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:PIO, hdb:PIO ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:DMA, hdd:PIO hdc: CD-224E, ATAPI CD/DVD-ROM drive hdc: UDMA/33 mode selected ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 72 (level, low) -> IRQ 72 AAC0: kernel 4.2-0[7349] Dec 11 2004 AAC0: monitor 4.2-0[7349] AAC0: bios 4.2-0[7349] AAC0: Non-DASD support enabled. AAC0: 64bit support enabled. AAC0: 64 Bit DAC enabled scsi2 : aacraid scsi 2:0:0:0: Direct-Access Adaptec 2120S Mirror V1.0 PQ: 0 ANSI: 2 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195 aac_srb: aac_fib_send failed with status: 8195