| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 May 2008 18:38:56 +0200
From: Miklos Vajna <vmiklos@...galware.org>
To: Ingo Molnar <mingo@...e.hu>
Cc: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>
Subject: [PATCH] x86: janitor work in irq.c
Wrapped long lines, removed trailing whitespaces, fixed case indentation
inside switch and so.
Signed-off-by: Miklos Vajna <vmiklos@...galware.org>
---
On Tue, May 13, 2008 at 02:46:53PM +0200, Ingo Molnar <mingo@...e.hu> wrote:
>
> * Miklos Vajna <vmiklos@...galware.org> wrote:
>
> > -static int pirq_amd756_get(struct pci_dev *router, struct pci_dev
> > *dev, int pirq)
> > +static int pirq_amd756_get(struct pci_dev *router, struct pci_dev
> > *dev,
> > + int pirq)
>
> it's nicer to break these lines the following way:
>
> static int
> pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
Ok, changed where that resulted in a short-enough line as well. I kept
write_config_nybble(), pirq_serverworks_set() and
serverworks_router_probe() as the way you recommend leaves the
declarations still too long.
Also fixed the string splits and the multiline comments.
arch/x86/pci/irq.c | 511 ++++++++++++++++++++++++++++++----------------------
1 files changed, 294 insertions(+), 217 deletions(-)
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 0908fca..b6f2b22 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -11,8 +11,8 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/smp.h>
+#include <linux/io.h>
+#include <linux/smp.h>
#include <asm/io_apic.h>
#include <linux/irq.h>
#include <linux/acpi.h>
@@ -45,7 +45,8 @@ struct irq_router {
char *name;
u16 vendor, device;
int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
- int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
+ int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
+ int new);
};
struct irq_router_handler {
@@ -61,7 +62,7 @@ void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
* and perform checksum verification.
*/
-static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
{
struct irq_routing_table *rt;
int i;
@@ -74,10 +75,11 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
rt->size < sizeof(struct irq_routing_table))
return NULL;
sum = 0;
- for (i=0; i < rt->size; i++)
+ for (i = 0; i < rt->size; i++)
sum += addr[i];
if (!sum) {
- DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
+ DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
+ rt);
return rt;
}
return NULL;
@@ -100,7 +102,8 @@ static struct irq_routing_table * __init pirq_find_routing_table(void)
return rt;
printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
}
- for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
+ for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000);
+ addr += 16) {
rt = pirq_check_routing_table(addr);
if (rt)
return rt;
@@ -122,20 +125,23 @@ static void __init pirq_peer_trick(void)
struct irq_info *e;
memset(busmap, 0, sizeof(busmap));
- for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
+ for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) /
+ sizeof(struct irq_info); i++) {
e = &rt->slots[i];
#ifdef DEBUG
{
int j;
- DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
- for(j=0; j<4; j++)
- DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
+ DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus,
+ e->devfn/8, e->slot);
+ for (j = 0; j < 4; j++)
+ DBG(" %d:%02x/%04x", j, e->irq[j].link,
+ e->irq[j].bitmap);
DBG("\n");
}
#endif
busmap[e->bus] = 1;
}
- for(i = 1; i < 256; i++) {
+ for (i = 1; i < 256; i++) {
int node;
if (!busmap[i] || pci_find_bus(0, i))
continue;
@@ -174,7 +180,8 @@ void eisa_set_level_irq(unsigned int irq)
* Common IRQ routing practice: nibbles in config space,
* offset by some magic constant.
*/
-static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr)
+static unsigned int
+read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr)
{
u8 x;
unsigned reg = offset + (nr >> 1);
@@ -183,7 +190,8 @@ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset,
return (nr & 1) ? (x >> 4) : (x & 0xf);
}
-static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
+static void write_config_nybble(struct pci_dev *router, unsigned offset,
+ unsigned nr, unsigned int val)
{
u8 x;
unsigned reg = offset + (nr >> 1);
@@ -200,15 +208,18 @@ static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigne
*/
static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
{
- static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 };
+ static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1,
+ 11, 0, 12, 0, 14, 0, 15 };
WARN_ON_ONCE(pirq > 16);
return irqmap[read_config_nybble(router, 0x48, pirq-1)];
}
-static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
- static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 };
+ static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1,
+ 3, 9, 11, 0, 13, 15 };
unsigned int val = irqmap[irq];
WARN_ON_ONCE(pirq > 16);
@@ -231,7 +242,8 @@ static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
return (x < 16) ? x : 0;
}
-static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
pci_write_config_byte(router, pirq, irq);
return 1;
@@ -247,7 +259,8 @@ static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq);
}
-static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq);
return 1;
@@ -258,7 +271,8 @@ static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i
* but without the ugly irq number munging.
* However, for 82C586, nibble map is different .
*/
-static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+static int
+pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
{
static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
@@ -266,7 +280,8 @@ static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq
return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
}
-static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
@@ -285,10 +300,11 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
WARN_ON_ONCE(pirq > 4);
- return read_config_nybble(router,0x43, pirqmap[pirq-1]);
+ return read_config_nybble(router, 0x43, pirqmap[pirq-1]);
}
-static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
@@ -306,7 +322,8 @@ static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
return read_config_nybble(router, 0xb8, pirq >> 4);
}
-static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
write_config_nybble(router, 0xb8, pirq >> 4, irq);
return 1;
@@ -314,7 +331,7 @@ static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
/*
* Cyrix: nibble offset 0x5C
- * 0x5C bits 7:4 is INTB bits 3:0 is INTA
+ * 0x5C bits 7:4 is INTB bits 3:0 is INTA
* 0x5D bits 7:4 is INTD bits 3:0 is INTC
*/
static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
@@ -322,7 +339,8 @@ static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
return read_config_nybble(router, 0x5C, (pirq-1)^1);
}
-static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
write_config_nybble(router, 0x5C, (pirq-1)^1, irq);
return 1;
@@ -350,7 +368,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
* Apparently there are systems implementing PCI routing table using
* link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
* We try our best to handle both link mappings.
- *
+ *
* Currently (2003-05-21) it appears most SiS chipsets follow the
* definition of routing registers from the SiS-5595 southbridge.
* According to the SiS 5595 datasheets the revision id's of the
@@ -370,7 +388,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
*
* 0x62: USBIRQ:
* bit 6 OHCI function disabled (0), enabled (1)
- *
+ *
* 0x6a: ACPI/SCI IRQ: bits 4-6 reserved
*
* 0x7e: Data Acq. Module IRQ - bits 4-6 reserved
@@ -405,7 +423,8 @@ static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK);
}
-static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
u8 x;
int reg;
@@ -439,7 +458,8 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
return read_config_nybble(router, 0x74, pirq-1);
}
-static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
WARN_ON_ONCE(pirq >= 9);
if (pirq > 8) {
@@ -461,13 +481,15 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
* 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1,
* and 0x03 for SMBus.
*/
-static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+static int
+pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
{
outb(pirq, 0xc00);
return inb(0xc01) & 0xf;
}
-static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
+ int pirq, int irq)
{
outb(pirq, 0xc00);
outb(irq, 0xc01);
@@ -482,27 +504,27 @@ static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int
* offset 0x56 0-3 PIRQA 4-7 PIRQB
* offset 0x57 0-3 PIRQC 4-7 PIRQD
*/
-static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+static int
+pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
{
u8 irq;
irq = 0;
if (pirq <= 4)
- {
irq = read_config_nybble(router, 0x56, pirq - 1);
- }
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
+ printk(KERN_INFO
+ "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
dev->vendor, dev->device, pirq, irq);
return irq;
}
-static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
+ printk(KERN_INFO
+ "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
dev->vendor, dev->device, pirq, irq);
if (pirq <= 4)
- {
write_config_nybble(router, 0x56, pirq - 1, irq);
- }
return 1;
}
@@ -528,7 +550,8 @@ static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
#ifdef CONFIG_PCI_BIOS
-static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int
+pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
struct pci_dev *bridge;
int pin = pci_get_interrupt_pin(dev, &bridge);
@@ -537,11 +560,14 @@ static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
#endif
-static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
static struct pci_device_id __initdata pirq_440gx[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82443GX_0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82443GX_2) },
{ },
};
@@ -549,50 +575,49 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
if (pci_dev_present(pirq_440gx))
return 0;
- switch(device)
- {
- case PCI_DEVICE_ID_INTEL_82371FB_0:
- case PCI_DEVICE_ID_INTEL_82371SB_0:
- case PCI_DEVICE_ID_INTEL_82371AB_0:
- case PCI_DEVICE_ID_INTEL_82371MX:
- case PCI_DEVICE_ID_INTEL_82443MX_0:
- case PCI_DEVICE_ID_INTEL_82801AA_0:
- case PCI_DEVICE_ID_INTEL_82801AB_0:
- case PCI_DEVICE_ID_INTEL_82801BA_0:
- case PCI_DEVICE_ID_INTEL_82801BA_10:
- case PCI_DEVICE_ID_INTEL_82801CA_0:
- case PCI_DEVICE_ID_INTEL_82801CA_12:
- case PCI_DEVICE_ID_INTEL_82801DB_0:
- case PCI_DEVICE_ID_INTEL_82801E_0:
- case PCI_DEVICE_ID_INTEL_82801EB_0:
- case PCI_DEVICE_ID_INTEL_ESB_1:
- case PCI_DEVICE_ID_INTEL_ICH6_0:
- case PCI_DEVICE_ID_INTEL_ICH6_1:
- case PCI_DEVICE_ID_INTEL_ICH7_0:
- case PCI_DEVICE_ID_INTEL_ICH7_1:
- case PCI_DEVICE_ID_INTEL_ICH7_30:
- case PCI_DEVICE_ID_INTEL_ICH7_31:
- case PCI_DEVICE_ID_INTEL_ESB2_0:
- case PCI_DEVICE_ID_INTEL_ICH8_0:
- case PCI_DEVICE_ID_INTEL_ICH8_1:
- case PCI_DEVICE_ID_INTEL_ICH8_2:
- case PCI_DEVICE_ID_INTEL_ICH8_3:
- case PCI_DEVICE_ID_INTEL_ICH8_4:
- case PCI_DEVICE_ID_INTEL_ICH9_0:
- case PCI_DEVICE_ID_INTEL_ICH9_1:
- case PCI_DEVICE_ID_INTEL_ICH9_2:
- case PCI_DEVICE_ID_INTEL_ICH9_3:
- case PCI_DEVICE_ID_INTEL_ICH9_4:
- case PCI_DEVICE_ID_INTEL_ICH9_5:
- case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
- case PCI_DEVICE_ID_INTEL_ICH10_0:
- case PCI_DEVICE_ID_INTEL_ICH10_1:
- case PCI_DEVICE_ID_INTEL_ICH10_2:
- case PCI_DEVICE_ID_INTEL_ICH10_3:
- r->name = "PIIX/ICH";
- r->get = pirq_piix_get;
- r->set = pirq_piix_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_INTEL_82371FB_0:
+ case PCI_DEVICE_ID_INTEL_82371SB_0:
+ case PCI_DEVICE_ID_INTEL_82371AB_0:
+ case PCI_DEVICE_ID_INTEL_82371MX:
+ case PCI_DEVICE_ID_INTEL_82443MX_0:
+ case PCI_DEVICE_ID_INTEL_82801AA_0:
+ case PCI_DEVICE_ID_INTEL_82801AB_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_10:
+ case PCI_DEVICE_ID_INTEL_82801CA_0:
+ case PCI_DEVICE_ID_INTEL_82801CA_12:
+ case PCI_DEVICE_ID_INTEL_82801DB_0:
+ case PCI_DEVICE_ID_INTEL_82801E_0:
+ case PCI_DEVICE_ID_INTEL_82801EB_0:
+ case PCI_DEVICE_ID_INTEL_ESB_1:
+ case PCI_DEVICE_ID_INTEL_ICH6_0:
+ case PCI_DEVICE_ID_INTEL_ICH6_1:
+ case PCI_DEVICE_ID_INTEL_ICH7_0:
+ case PCI_DEVICE_ID_INTEL_ICH7_1:
+ case PCI_DEVICE_ID_INTEL_ICH7_30:
+ case PCI_DEVICE_ID_INTEL_ICH7_31:
+ case PCI_DEVICE_ID_INTEL_ESB2_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_1:
+ case PCI_DEVICE_ID_INTEL_ICH8_2:
+ case PCI_DEVICE_ID_INTEL_ICH8_3:
+ case PCI_DEVICE_ID_INTEL_ICH8_4:
+ case PCI_DEVICE_ID_INTEL_ICH9_0:
+ case PCI_DEVICE_ID_INTEL_ICH9_1:
+ case PCI_DEVICE_ID_INTEL_ICH9_2:
+ case PCI_DEVICE_ID_INTEL_ICH9_3:
+ case PCI_DEVICE_ID_INTEL_ICH9_4:
+ case PCI_DEVICE_ID_INTEL_ICH9_5:
+ case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
+ case PCI_DEVICE_ID_INTEL_ICH10_0:
+ case PCI_DEVICE_ID_INTEL_ICH10_1:
+ case PCI_DEVICE_ID_INTEL_ICH10_2:
+ case PCI_DEVICE_ID_INTEL_ICH10_3:
+ r->name = "PIIX/ICH";
+ r->get = pirq_piix_get;
+ r->set = pirq_piix_set;
+ return 1;
}
return 0;
}
@@ -606,7 +631,7 @@ static __init int via_router_probe(struct irq_router *r,
* workarounds for some buggy BIOSes
*/
if (device == PCI_DEVICE_ID_VIA_82C586_0) {
- switch(router->device) {
+ switch (router->device) {
case PCI_DEVICE_ID_VIA_82C686:
/*
* Asus k7m bios wrongly reports 82C686A
@@ -624,7 +649,7 @@ static __init int via_router_probe(struct irq_router *r,
}
}
- switch(device) {
+ switch (device) {
case PCI_DEVICE_ID_VIA_82C586_0:
r->name = "VIA";
r->get = pirq_via586_get;
@@ -645,88 +670,89 @@ static __init int via_router_probe(struct irq_router *r,
return 0;
}
-static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_VLSI_82C534:
- r->name = "VLSI 82C534";
- r->get = pirq_vlsi_get;
- r->set = pirq_vlsi_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_VLSI_82C534:
+ r->name = "VLSI 82C534";
+ r->get = pirq_vlsi_get;
+ r->set = pirq_vlsi_set;
+ return 1;
}
return 0;
}
-static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int serverworks_router_probe(struct irq_router *r,
+ struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_SERVERWORKS_OSB4:
- case PCI_DEVICE_ID_SERVERWORKS_CSB5:
- r->name = "ServerWorks";
- r->get = pirq_serverworks_get;
- r->set = pirq_serverworks_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_SERVERWORKS_OSB4:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5:
+ r->name = "ServerWorks";
+ r->get = pirq_serverworks_get;
+ r->set = pirq_serverworks_set;
+ return 1;
}
return 0;
}
-static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
if (device != PCI_DEVICE_ID_SI_503)
return 0;
-
+
r->name = "SIS";
r->get = pirq_sis_get;
r->set = pirq_sis_set;
return 1;
}
-static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_CYRIX_5520:
- r->name = "NatSemi";
- r->get = pirq_cyrix_get;
- r->set = pirq_cyrix_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_CYRIX_5520:
+ r->name = "NatSemi";
+ r->get = pirq_cyrix_get;
+ r->set = pirq_cyrix_set;
+ return 1;
}
return 0;
}
-static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_OPTI_82C700:
- r->name = "OPTI";
- r->get = pirq_opti_get;
- r->set = pirq_opti_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_OPTI_82C700:
+ r->name = "OPTI";
+ r->get = pirq_opti_get;
+ r->set = pirq_opti_set;
+ return 1;
}
return 0;
}
-static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_ITE_IT8330G_0:
- r->name = "ITE";
- r->get = pirq_ite_get;
- r->set = pirq_ite_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_ITE_IT8330G_0:
+ r->name = "ITE";
+ r->get = pirq_ite_get;
+ r->set = pirq_ite_set;
+ return 1;
}
return 0;
}
-static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
+ switch (device) {
case PCI_DEVICE_ID_AL_M1533:
case PCI_DEVICE_ID_AL_M1563:
printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
@@ -738,28 +764,29 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
return 0;
}
-static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int
+amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_AMD_VIPER_740B:
- r->name = "AMD756";
- break;
- case PCI_DEVICE_ID_AMD_VIPER_7413:
- r->name = "AMD766";
- break;
- case PCI_DEVICE_ID_AMD_VIPER_7443:
- r->name = "AMD768";
- break;
- default:
- return 0;
+ switch (device) {
+ case PCI_DEVICE_ID_AMD_VIPER_740B:
+ r->name = "AMD756";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7413:
+ r->name = "AMD766";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7443:
+ r->name = "AMD768";
+ break;
+ default:
+ return 0;
}
r->get = pirq_amd756_get;
r->set = pirq_amd756_set;
return 1;
}
-
-static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+
+static __init int
+pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
switch (device) {
case PCI_DEVICE_ID_PICOPOWER_PT86C523:
@@ -800,7 +827,7 @@ static struct pci_dev *pirq_router_dev;
* FIXME: should we have an option to say "generic for
* chipset" ?
*/
-
+
static void __init pirq_find_router(struct irq_router *r)
{
struct irq_routing_table *rt = pirq_table;
@@ -819,7 +846,7 @@ static void __init pirq_find_router(struct irq_router *r)
r->name = "default";
r->get = NULL;
r->set = NULL;
-
+
DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
rt->rtr_vendor, rt->rtr_device);
@@ -830,12 +857,14 @@ static void __init pirq_find_router(struct irq_router *r)
return;
}
- for( h = pirq_routers; h->vendor; h++) {
+ for (h = pirq_routers; h->vendor; h++) {
/* First look for a router match */
- if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+ if (rt->rtr_vendor == h->vendor &&
+ h->probe(r, pirq_router_dev, rt->rtr_device))
break;
/* Fall back to a device match */
- if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
+ if (pirq_router_dev->vendor == h->vendor &&
+ h->probe(r, pirq_router_dev, pirq_router_dev->device))
break;
}
printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
@@ -850,11 +879,13 @@ static void __init pirq_find_router(struct irq_router *r)
static struct irq_info *pirq_get_info(struct pci_dev *dev)
{
struct irq_routing_table *rt = pirq_table;
- int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+ int entries = (rt->size - sizeof(struct irq_routing_table)) /
+ sizeof(struct irq_info);
struct irq_info *info;
for (info = rt->slots; entries--; info++)
- if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+ if (info->bus == dev->bus->number &&
+ PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
return info;
return NULL;
}
@@ -882,7 +913,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
if (!pirq_table)
return 0;
-
+
DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
info = pirq_get_info(dev);
if (!info) {
@@ -895,7 +926,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
DBG(" -> not routed\n" KERN_DEBUG);
return 0;
}
- DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+ DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
+ pirq_table->exclusive_irqs);
mask &= pcibios_irq_mask;
/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -908,7 +940,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
}
/* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
- if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
+ if (acer_tm360_irqrouting && dev->irq == 11 &&
+ dev->vendor == PCI_VENDOR_ID_O2) {
pirq = 0x68;
mask = 0x400;
dev->irq = r->get(pirq_router_dev, dev, pirq);
@@ -921,17 +954,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
*/
newirq = dev->irq;
if (newirq && !((1 << newirq) & mask)) {
- if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
- else printk("\n" KERN_WARNING
- "PCI: IRQ %i for device %s doesn't match PIRQ mask "
- "- try pci=usepirqmask\n" KERN_DEBUG, newirq,
- pci_name(dev));
+ if (pci_probe & PCI_USE_PIRQ_MASK)
+ newirq = 0;
+ else
+ printk("\n" KERN_WARNING
+ "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
+ KERN_DEBUG, newirq,
+ pci_name(dev));
}
if (!newirq && assign) {
for (i = 0; i < 16; i++) {
if (!(mask & (1 << i)))
continue;
- if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
+ if (pirq_penalty[i] < pirq_penalty[newirq] &&
+ can_request_irq(i, IRQF_SHARED))
newirq = i;
}
}
@@ -942,12 +978,13 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
irq = pirq & 0xf;
DBG(" -> hardcoded IRQ %d\n", irq);
msg = "Hardcoded";
- } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
- ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
+ } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
+ ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
DBG(" -> got IRQ %d\n", irq);
msg = "Found";
eisa_set_level_irq(irq);
- } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+ } else if (newirq && r->set &&
+ (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
DBG(" -> assigning IRQ %d", newirq);
if (r->set(pirq_router_dev, dev, pirq, newirq)) {
eisa_set_level_irq(newirq);
@@ -965,7 +1002,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
} else
return 0;
}
- printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+ printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
+ pci_name(dev));
/* Update IRQ for all devices with the same pirq value */
while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -977,20 +1015,26 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
if (!info)
continue;
if (info->irq[pin].link == pirq) {
- /* We refuse to override the dev->irq information. Give a warning! */
- if ( dev2->irq && dev2->irq != irq && \
+ /*
+ * We refuse to override the dev->irq
+ * information. Give a warning!
+ */
+ if (dev2->irq && dev2->irq != irq && \
(!(pci_probe & PCI_USE_PIRQ_MASK) || \
- ((1 << dev2->irq) & mask)) ) {
+ ((1 << dev2->irq) & mask))) {
#ifndef CONFIG_PCI_MSI
- printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
- pci_name(dev2), dev2->irq, irq);
+ printk(KERN_INFO
+ "IRQ routing conflict for %s, have irq %d, want irq %d\n",
+ pci_name(dev2), dev2->irq, irq);
#endif
- continue;
- }
+ continue;
+ }
dev2->irq = irq;
pirq_penalty[irq]++;
if (dev != dev2)
- printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+ printk(KERN_INFO
+ "PCI: Sharing IRQ %d with %s\n",
+ irq, pci_name(dev2));
}
}
return 1;
@@ -1004,15 +1048,21 @@ static void __init pcibios_fixup_irqs(void)
DBG(KERN_DEBUG "PCI: IRQ fixup\n");
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
/*
- * If the BIOS has set an out of range IRQ number, just ignore it.
- * Also keep track of which IRQ's are already in use.
+ * If the BIOS has set an out of range IRQ number, just
+ * ignore it. Also keep track of which IRQ's are
+ * already in use.
*/
if (dev->irq >= 16) {
- DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+ DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
+ pci_name(dev), dev->irq);
dev->irq = 0;
}
- /* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
- if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
+ /*
+ * If the IRQ is already assigned to a PCI device,
+ * ignore its ISA use penalty
+ */
+ if (pirq_penalty[dev->irq] >= 100 &&
+ pirq_penalty[dev->irq] < 100000)
pirq_penalty[dev->irq] = 0;
pirq_penalty[dev->irq]++;
}
@@ -1024,31 +1074,40 @@ static void __init pcibios_fixup_irqs(void)
/*
* Recalculate IRQ numbers if we use the I/O APIC.
*/
- if (io_apic_assign_pci_irqs)
- {
+ if (io_apic_assign_pci_irqs) {
int irq;
if (pin) {
- pin--; /* interrupt pins are numbered starting from 1 */
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+ /*
+ * interrupt pins are numbered starting
+ * from 1
+ */
+ pin--;
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn), pin);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
* parent slot, and pin number. The SMP code detects such bridged
* busses itself so we should get into this branch reliably.
*/
- if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
- struct pci_dev * bridge = dev->bus->self;
+ if (irq < 0 && dev->bus->parent) {
+ /* go back to the bridge */
+ struct pci_dev *bridge = dev->bus->self;
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin);
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ PCI_SLOT(bridge->devfn),
+ pin);
if (irq >= 0)
- printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge), 'A' + pin, irq);
+ printk(KERN_WARNING
+ "PCI: using PPB %s[%c] to get irq %d\n",
+ pci_name(bridge),
+ 'A' + pin, irq);
}
if (irq >= 0) {
- printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+ printk(KERN_INFO
+ "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
pci_name(dev), 'A' + pin, irq);
dev->irq = irq;
}
@@ -1071,7 +1130,8 @@ static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
{
if (!broken_hp_bios_irq9) {
broken_hp_bios_irq9 = 1;
- printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+ printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+ d->ident);
}
return 0;
}
@@ -1084,7 +1144,8 @@ static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
{
if (!acer_tm360_irqrouting) {
acer_tm360_irqrouting = 1;
- printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+ printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+ d->ident);
}
return 0;
}
@@ -1096,7 +1157,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
+ DMI_MATCH(DMI_PRODUCT_VERSION,
+ "HP Pavilion Notebook Model GE"),
DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
},
},
@@ -1131,11 +1193,14 @@ static int __init pcibios_irq_init(void)
pirq_find_router(&pirq_router);
if (pirq_table->exclusive_irqs) {
int i;
- for (i=0; i<16; i++)
+ for (i = 0; i < 16; i++)
if (!(pirq_table->exclusive_irqs & (1 << i)))
pirq_penalty[i] += 100;
}
- /* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+ /*
+ * If we're using the I/O APIC, avoid using the PCI IRQ
+ * routing table
+ */
if (io_apic_assign_pci_irqs)
pirq_table = NULL;
}
@@ -1182,33 +1247,40 @@ static int pirq_enable_irq(struct pci_dev *dev)
if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
char *msg = "";
- pin--; /* interrupt pins are numbered starting from 1 */
+ pin--; /* interrupt pins are numbered starting from 1 */
if (io_apic_assign_pci_irqs) {
int irq;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn), pin);
/*
- * Busses behind bridges are typically not listed in the MP-table.
- * In this case we have to look up the IRQ based on the parent bus,
- * parent slot, and pin number. The SMP code detects such bridged
- * busses itself so we should get into this branch reliably.
+ * Busses behind bridges are typically not
+ * listed in the MP-table. In this case we have
+ * to look up the IRQ based on the parent bus,
+ * parent slot, and pin number. The SMP code
+ * detects such bridged busses itself so we
+ * should get into this branch reliably.
*/
temp_dev = dev;
- while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
- struct pci_dev * bridge = dev->bus->self;
+ while (irq < 0 && dev->bus->parent) {
+ /* go back to the bridge */
+ struct pci_dev *bridge = dev->bus->self;
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
- printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge), 'A' + pin, irq);
+ printk(KERN_WARNING
+ "PCI: using PPB %s[%c] to get irq %d\n",
+ pci_name(bridge),
+ 'A' + pin, irq);
dev = bridge;
}
dev = temp_dev;
if (irq >= 0) {
- printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+ printk(KERN_INFO
+ "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
pci_name(dev), 'A' + pin, irq);
dev->irq = irq;
return 0;
@@ -1219,12 +1291,17 @@ static int pirq_enable_irq(struct pci_dev *dev)
else
msg = " Please try using pci=biosirq.";
- /* With IDE legacy devices the IRQ lookup failure is not a problem.. */
- if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
+ /*
+ * With IDE legacy devices the IRQ lookup failure is not
+ * a problem..
+ */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+ !(dev->class & 0x5))
return 0;
- printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
- 'A' + pin, pci_name(dev), msg);
+ printk(KERN_WARNING
+ "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
+ 'A' + pin, pci_name(dev), msg);
}
return 0;
}
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists