Message-ID: <20080513135501.5c9b4650@ephemeral>
Date:	Tue, 13 May 2008 13:55:01 -0400
From:	Andres Salomon <dilinger@...ued.net>
To:	Andres Salomon <dilinger@...ued.net>
Cc:	Andrew Morton <akpm@...ux-foundation.org>,
	linux-fbdev-devel@...ts.sourceforge.net,
	linux-geode@...badil.infradead.org,
	Jens Rottmann <JRottmann@...PERT-AT.de>,
	linux-kernel@...r.kernel.org,
	Linus Torvalds <torvalds@...ux-foundation.org>
Subject: Re: lxfb driver regression

On Tue, 13 May 2008 13:50:15 -0400
Andres Salomon <dilinger@...ued.net> wrote:

> On Tue, 13 May 2008 09:35:54 -0700
> Andrew Morton <akpm@...ux-foundation.org> wrote:
> 
> > On Tue, 13 May 2008 08:48:02 -0700 (PDT) Linus Torvalds
> > <torvalds@...ux-foundation.org> wrote:
> > 
> > > 
> > > 
> > > On Mon, 12 May 2008, Andres Salomon wrote:
> > > > 
> > > > Sorry for the delay, I got around to testing this today.  It
> > > > works much better on an XO, so I've ack'd it.
> > > 
> > > If people expect me to apply that patch, I hope they'll re-send
> > > (with acks etc). Otherwise I just expect I'll get it through the
> > > normal fbdev queues (which is often Andrew, but shouldn't be).
> > > 
> > 
> > It got confusing.  Turns out that I had a speculative revert patch,
> > followed by a new patch with an identical changelog to the first
> > one.
> > 
> > I folded them together and below is what I presently have against
> > mainline, but I have no changelog describing what it fixes.
> > 
> > Can someone send some text please?
> > 
> 
> How's this?  Jordan and Jens, please correct me if I'm off.
> 
> 
> 

Oh, and of course:


From: Jens Rottmann <JRottmann@...PERT-AT.de>


> 
> [PATCH] lxfb: fix regression on OLPC caused by PLL table updates
> 
> The following patch caused a regression with OLPC panels:
> 
>  commit 3888d4639e78802c4ec1086127124e890461b9e4
>     lxfb: extend PLL table to support dotclocks below 25 MHz
> 
>     Extends the PLL frequency table of the AMD Geode-LX frame buffer
> driver to make use of the DIV4 bit, thus adding support for dotclocks
> between 6 and 25 MHz.  These are needed for small LCDs (e.g.
> 320x240).  Also inserts some intermediate steps between pre-existing
> frequencies.
> 
> The problem was the insertion of intermediate steps into the frequency
> table; they would cause the wrong frequency to be matched.  This patch
> drops those intermediate frequencies while keeping the sub-25MHz
> frequencies.
> 
> Signed-off-by: Andres Salomon <dilinger@...ian.org>
> 
> 
> > ---
> > a/drivers/video/geode/lxfb_ops.c~fix-lxfb-extend-pll-table-to-support-dotclocks-below-25-mhz
> > +++ a/drivers/video/geode/lxfb_ops.c @@ -63,54 +63,32 @@ static
> > const struct { { 0x00014284,  19688 },
> >    { 0x00011104,  20400 },
> >    { 0x00016363,  23625 },
> > -  { 0x00015303,  24380 },
> >    { 0x000031AC,  24923 },
> >    { 0x0000215D,  25175 },
> >    { 0x00001087,  27000 },
> >    { 0x0000216C,  28322 },
> >    { 0x0000218D,  28560 },
> > -  { 0x00010041,  29913 },
> >    { 0x000010C9,  31200 },
> >    { 0x00003147,  31500 },
> > -  { 0x000141A1,  32400 },
> >    { 0x000010A7,  33032 },
> > -  { 0x00012182,  33375 },
> > -  { 0x000141B1,  33750 },
> >    { 0x00002159,  35112 },
> >    { 0x00004249,  35500 },
> >    { 0x00000057,  36000 },
> > -  { 0x000141E1,  37125 },
> >    { 0x0000219A,  37889 },
> >    { 0x00002158,  39168 },
> >    { 0x00000045,  40000 },
> > -  { 0x000131A1,  40500 },
> > -  { 0x00010061,  42301 },
> >    { 0x00000089,  43163 },
> > -  { 0x00012151,  43875 },
> >    { 0x000010E7,  44900 },
> >    { 0x00002136,  45720 },
> > -  { 0x000152E1,  47250 },
> > -  { 0x00010071,  48000 },
> >    { 0x00003207,  49500 },
> >    { 0x00002187,  50000 },
> > -  { 0x00014291,  50625 },
> > -  { 0x00011101,  51188 },
> > -  { 0x00017481,  54563 },
> >    { 0x00004286,  56250 },
> > -  { 0x00014170,  57375 },
> > -  { 0x00016210,  58500 },
> >    { 0x000010E5,  60065 },
> > -  { 0x00013140,  62796 },
> >    { 0x00004214,  65000 },
> > -  { 0x00016250,  65250 },
> >    { 0x00001105,  68179 },
> > -  { 0x000141C0,  69600 },
> > -  { 0x00015220,  70160 },
> > -  { 0x00010050,  72000 },
> >    { 0x000031E4,  74250 },
> >    { 0x00003183,  75000 },
> >    { 0x00004284,  78750 },
> > -  { 0x00012130,  80052 },
> >    { 0x00001104,  81600 },
> >    { 0x00006363,  94500 },
> >    { 0x00005303,  97520 },
> > _
> > 
> 
> _______________________________________________
> Linux-geode mailing list
> Linux-geode@...badil.infradead.org
> http://bombadil.infradead.org/mailman/listinfo/linux-geode
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists