[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <482ADEB8.4030103@LiPPERT-AT.de>
Date: Wed, 14 May 2008 14:44:40 +0200
From: Jens Rottmann <JRottmann@...PERT-AT.de>
To: Andres Salomon <dilinger@...ued.net>,
Andrew Morton <akpm@...ux-foundation.org>
CC: Linus Torvalds <torvalds@...ux-foundation.org>,
jordan.crouse@....com, linux-kernel@...r.kernel.org,
linux-geode@...badil.infradead.org,
linux-fbdev-devel@...ts.sourceforge.net
Subject: Re: lxfb driver regression
Andres Salomon wrote:
> How's this? Jordan and Jens, please correct me if I'm off.
It's truly beautiful.
Summing up to avoid complaints.
[PATCH] lxfb: fix regression on OLPC caused by PLL table updates
The following patch caused a regression with OLPC panels:
commit 3888d4639e78802c4ec1086127124e890461b9e4
lxfb: extend PLL table to support dotclocks below 25 MHz
Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to
make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25
MHz. These are needed for small LCDs (e.g. 320x240). Also inserts some
intermediate steps between pre-existing frequencies.
The problem was the insertion of intermediate steps into the frequency
table; they would cause the wrong frequency to be matched. This patch
drops those intermediate frequencies while keeping the sub-25MHz
frequencies.
Signed-off-by: Andres Salomon <dilinger@...ian.org>
Acked-by: Jordan Crouse <jordan.crouse@....com>
Signed-off-by: Jens Rottmann <JRottmann@...PERT-AT.de>
---
--- a/drivers/video/geode/lxfb_ops.c~fix-lxfb-extend-pll-table-to-support-dotclocks-below-25-mhz
+++ a/drivers/video/geode/lxfb_ops.c
@@ -63,54 +63,32 @@ static const struct {
{ 0x00014284, 19688 },
{ 0x00011104, 20400 },
{ 0x00016363, 23625 },
- { 0x00015303, 24380 },
{ 0x000031AC, 24923 },
{ 0x0000215D, 25175 },
{ 0x00001087, 27000 },
{ 0x0000216C, 28322 },
{ 0x0000218D, 28560 },
- { 0x00010041, 29913 },
{ 0x000010C9, 31200 },
{ 0x00003147, 31500 },
- { 0x000141A1, 32400 },
{ 0x000010A7, 33032 },
- { 0x00012182, 33375 },
- { 0x000141B1, 33750 },
{ 0x00002159, 35112 },
{ 0x00004249, 35500 },
{ 0x00000057, 36000 },
- { 0x000141E1, 37125 },
{ 0x0000219A, 37889 },
{ 0x00002158, 39168 },
{ 0x00000045, 40000 },
- { 0x000131A1, 40500 },
- { 0x00010061, 42301 },
{ 0x00000089, 43163 },
- { 0x00012151, 43875 },
{ 0x000010E7, 44900 },
{ 0x00002136, 45720 },
- { 0x000152E1, 47250 },
- { 0x00010071, 48000 },
{ 0x00003207, 49500 },
{ 0x00002187, 50000 },
- { 0x00014291, 50625 },
- { 0x00011101, 51188 },
- { 0x00017481, 54563 },
{ 0x00004286, 56250 },
- { 0x00014170, 57375 },
- { 0x00016210, 58500 },
{ 0x000010E5, 60065 },
- { 0x00013140, 62796 },
{ 0x00004214, 65000 },
- { 0x00016250, 65250 },
{ 0x00001105, 68179 },
- { 0x000141C0, 69600 },
- { 0x00015220, 70160 },
- { 0x00010050, 72000 },
{ 0x000031E4, 74250 },
{ 0x00003183, 75000 },
{ 0x00004284, 78750 },
- { 0x00012130, 80052 },
{ 0x00001104, 81600 },
{ 0x00006363, 94500 },
{ 0x00005303, 97520 },
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists