This patch adds full support for ftrace for PowerPC (both 64 and 32 bit). This includes dynamic tracing and function filtering. Signed-off-by: Steven Rostedt --- arch/powerpc/Kconfig | 5 arch/powerpc/kernel/Makefile | 14 ++ arch/powerpc/kernel/entry_32.S | 130 ++++++++++++++++++++++++ arch/powerpc/kernel/entry_64.S | 62 +++++++++++ arch/powerpc/kernel/ftrace.c | 165 +++++++++++++++++++++++++++++++ arch/powerpc/kernel/io.c | 3 arch/powerpc/kernel/irq.c | 6 - arch/powerpc/kernel/setup_32.c | 11 +- arch/powerpc/kernel/setup_64.c | 5 arch/powerpc/platforms/powermac/Makefile | 5 kernel/trace/trace_selftest.c | 11 +- 11 files changed, 406 insertions(+), 11 deletions(-) Index: linux-sched-devel.git/arch/powerpc/kernel/io.c =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/kernel/io.c 2008-05-14 19:30:53.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/kernel/io.c 2008-05-14 19:31:48.000000000 -0700 @@ -120,7 +120,8 @@ EXPORT_SYMBOL(_outsl_ns); #define IO_CHECK_ALIGN(v,a) ((((unsigned long)(v)) & ((a) - 1)) == 0) -void _memset_io(volatile void __iomem *addr, int c, unsigned long n) +notrace void +_memset_io(volatile void __iomem *addr, int c, unsigned long n) { void *p = (void __force *)addr; u32 lc = c; Index: linux-sched-devel.git/arch/powerpc/kernel/Makefile =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/kernel/Makefile 2008-05-14 19:30:53.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/kernel/Makefile 2008-05-14 19:31:56.000000000 -0700 @@ -12,6 +12,18 @@ CFLAGS_prom_init.o += -fPIC CFLAGS_btext.o += -fPIC endif +ifdef CONFIG_FTRACE +# Do not trace early boot code +CFLAGS_REMOVE_cputable.o = -pg +CFLAGS_REMOVE_prom_init.o = -pg + +ifdef CONFIG_DYNAMIC_FTRACE +# dynamic ftrace setup. +CFLAGS_REMOVE_ftrace.o = -pg +endif + +endif + obj-y := cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ init_task.o process.o systbl.o idle.o \ @@ -79,6 +91,8 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o obj-$(CONFIG_AUDIT) += audit.o obj64-$(CONFIG_AUDIT) += compat_audit.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o + obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o ifneq ($(CONFIG_PPC_INDIRECT_IO),y) Index: linux-sched-devel.git/arch/powerpc/platforms/powermac/Makefile =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/platforms/powermac/Makefile 2008-05-14 19:30:53.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/platforms/powermac/Makefile 2008-05-14 19:31:48.000000000 -0700 @@ -1,5 +1,10 @@ CFLAGS_bootx_init.o += -fPIC +ifdef CONFIG_FTRACE +# Do not trace early boot code +CFLAGS_REMOVE_bootx_init.o = -pg +endif + obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o Index: linux-sched-devel.git/arch/powerpc/Kconfig =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/Kconfig 2008-05-14 19:30:50.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/Kconfig 2008-05-14 19:31:56.000000000 -0700 @@ -106,11 +106,12 @@ config PPC bool default y select HAVE_IDE - select HAVE_OPROFILE + select HAVE_IMMEDIATE + select HAVE_FTRACE select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_LMB - select HAVE_IMMEDIATE + select HAVE_OPROFILE config EARLY_PRINTK bool Index: linux-sched-devel.git/arch/powerpc/kernel/entry_32.S =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/kernel/entry_32.S 2008-05-14 19:30:50.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/kernel/entry_32.S 2008-05-14 19:31:56.000000000 -0700 @@ -1035,3 +1035,133 @@ machine_check_in_rtas: /* XXX load up BATs and panic */ #endif /* CONFIG_PPC_RTAS */ + +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +_GLOBAL(mcount) +_GLOBAL(_mcount) + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + stw r7, 28(r1) + mfcr r5 + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) + .globl mcount_call +mcount_call: + bl ftrace_stub + nop + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr + +_GLOBAL(ftrace_caller) + /* Based off of objdump optput from glibc */ + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr +#else +_GLOBAL(mcount) +_GLOBAL(_mcount) + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) + + LOAD_REG_ADDR(r5, ftrace_trace_function) +#if 0 + mtctr r3 + mr r1, r5 + bctrl +#endif + lwz r5,0(r5) +#if 1 + mtctr r5 + bctrl +#else + bl ftrace_stub +#endif + nop + + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr +#endif + +_GLOBAL(ftrace_stub) + blr + +#endif /* CONFIG_MCOUNT */ Index: linux-sched-devel.git/arch/powerpc/kernel/entry_64.S =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/kernel/entry_64.S 2008-05-14 19:30:50.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/kernel/entry_64.S 2008-05-14 19:31:56.000000000 -0700 @@ -870,3 +870,65 @@ _GLOBAL(enter_prom) ld r0,16(r1) mtlr r0 blr + +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +_GLOBAL(mcount) +_GLOBAL(_mcount) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + stdu r1, -112(r1) + std r3, 128(r1) + .globl mcount_call +mcount_call: + bl ftrace_stub + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 + blr + +_GLOBAL(ftrace_caller) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr +#else +_GLOBAL(mcount) + blr + +_GLOBAL(_mcount) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) + + + LOAD_REG_ADDR(r5,ftrace_trace_function) + ld r5,0(r5) + ld r5,0(r5) + mtctr r5 + bctrl + + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr + +#endif +#endif Index: linux-sched-devel.git/arch/powerpc/kernel/ftrace.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-sched-devel.git/arch/powerpc/kernel/ftrace.c 2008-05-14 19:31:56.000000000 -0700 @@ -0,0 +1,165 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt + * + * Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#define CALL_BACK 4 + +static unsigned int ftrace_nop = 0x60000000; + +#ifdef CONFIG_PPC32 +# define GET_ADDR(addr) addr +#else +/* PowerPC64's functions are data that points to the functions */ +# define GET_ADDR(addr) *(unsigned long *)addr +#endif + +notrace int ftrace_ip_converted(unsigned long ip) +{ + unsigned int save; + + ip -= CALL_BACK; + save = *(unsigned int *)ip; + + return save == ftrace_nop; +} + +static unsigned int notrace ftrace_calc_offset(long ip, long addr) +{ + return (int)((addr + CALL_BACK) - ip); +} + +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)&ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static unsigned int op; + + addr = GET_ADDR(addr); + + /* Set to "bl addr" */ + op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffe); + + /* + * No locking needed, this must be called via kstop_machine + * which in essence is like running on a uniprocessor machine. + */ + return (unsigned char *)&op; +} + +#ifdef CONFIG_PPC64 +# define _ASM_ALIGN " .align 3 " +# define _ASM_PTR " .llong " +#else +# define _ASM_ALIGN " .align 2 " +# define _ASM_PTR " .long " +#endif + +notrace int +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned replaced; + unsigned old = *(unsigned *)old_code; + unsigned new = *(unsigned *)new_code; + int faulted = 0; + + /* move the IP back to the start of the call */ + ip -= CALL_BACK; + + /* + * Note: Due to modules and __init, code can + * disappear and change, we need to protect against faulting + * as well as code changing. + * + * No real locking needed, this code is run through + * kstop_machine. + */ + asm volatile ( + "1: lwz %1, 0(%2)\n" + " cmpw %1, %5\n" + " bne 2f\n" + " stwu %3, 0(%2)\n" + "2:\n" + ".section .fixup, \"ax\"\n" + "3: li %0, 1\n" + " b 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + _ASM_ALIGN "\n" + _ASM_PTR "1b, 3b\n" + ".previous" + : "=r"(faulted), "=r"(replaced) + : "r"(ip), "r"(new), + "0"(faulted), "r"(old) + : "memory"); + + if (replaced != old && replaced != new) + faulted = 2; + + if (!faulted) + flush_icache_range(ip, ip + 8); + + return faulted; +} + +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[4], *new; + int ret; + + ip += CALL_BACK; + + memcpy(old, &ftrace_call, 4); + new = ftrace_call_replace(ip, (unsigned long)func); + ret = ftrace_modify_code(ip, old, new); + + return ret; +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[4], *new; + + /* ip is at the location, but modify code will subtact this */ + ip += CALL_BACK; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, 4); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* This is running in kstop_machine */ + + ftrace_mcount_set(data); + + return 0; +} + Index: linux-sched-devel.git/arch/powerpc/kernel/irq.c =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/kernel/irq.c 2008-05-14 19:30:50.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/kernel/irq.c 2008-05-14 19:31:56.000000000 -0700 @@ -98,7 +98,7 @@ EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -static inline unsigned long get_hard_enabled(void) +static inline notrace unsigned long get_hard_enabled(void) { unsigned long enabled; @@ -108,13 +108,13 @@ static inline unsigned long get_hard_ena return enabled; } -static inline void set_soft_enabled(unsigned long enable) +static inline notrace void set_soft_enabled(unsigned long enable) { __asm__ __volatile__("stb %0,%1(13)" : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } -void raw_local_irq_restore(unsigned long en) +notrace void raw_local_irq_restore(unsigned long en) { /* * get_paca()->soft_enabled = en; Index: linux-sched-devel.git/arch/powerpc/kernel/setup_32.c =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/kernel/setup_32.c 2008-05-14 19:30:50.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/kernel/setup_32.c 2008-05-14 19:31:56.000000000 -0700 @@ -47,6 +47,11 @@ #include #endif +#ifdef CONFIG_FTRACE +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif + extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid; @@ -81,7 +86,7 @@ int ucache_bsize; * from the address that it was linked at, so we must use RELOC/PTRRELOC * to access static data (including strings). -- paulus */ -unsigned long __init early_init(unsigned long dt_ptr) +notrace unsigned long __init early_init(unsigned long dt_ptr) { unsigned long offset = reloc_offset(); struct cpu_spec *spec; @@ -111,7 +116,7 @@ unsigned long __init early_init(unsigned * This is called very early on the boot process, after a minimal * MMU environment has been set up but before MMU_init is called. */ -void __init machine_init(unsigned long dt_ptr, unsigned long phys) +notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys) { /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); @@ -133,7 +138,7 @@ void __init machine_init(unsigned long d #ifdef CONFIG_BOOKE_WDT /* Checks wdt=x and wdt_period=xx command-line option */ -int __init early_parse_wdt(char *p) +notrace int __init early_parse_wdt(char *p) { if (p && strncmp(p, "0", 1) != 0) booke_wdt_enabled = 1; Index: linux-sched-devel.git/arch/powerpc/kernel/setup_64.c =================================================================== --- linux-sched-devel.git.orig/arch/powerpc/kernel/setup_64.c 2008-05-14 19:30:50.000000000 -0700 +++ linux-sched-devel.git/arch/powerpc/kernel/setup_64.c 2008-05-14 19:31:56.000000000 -0700 @@ -85,6 +85,11 @@ struct ppc64_caches ppc64_caches = { }; EXPORT_SYMBOL_GPL(ppc64_caches); +#ifdef CONFIG_FTRACE +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif + /* * These are used in binfmt_elf.c to put aux entries on the stack * for each elf executable being started. Index: linux-sched-devel.git/kernel/trace/trace_selftest.c =================================================================== --- linux-sched-devel.git.orig/kernel/trace/trace_selftest.c 2008-05-14 19:30:50.000000000 -0700 +++ linux-sched-devel.git/kernel/trace/trace_selftest.c 2008-05-14 19:31:56.000000000 -0700 @@ -123,6 +123,7 @@ int trace_selftest_startup_dynamic_traci int ret; int save_ftrace_enabled = ftrace_enabled; int save_tracer_enabled = tracer_enabled; + char *func_name; /* The ftrace test PASSED */ printk(KERN_CONT "PASSED\n"); @@ -142,9 +143,15 @@ int trace_selftest_startup_dynamic_traci return ret; } + /* + * Some archs *cough*PowerPC*cough* add charachters to the + * start of the function names. We simply put a '*' to + * accomodate them. + */ + func_name = "*" STR(DYN_FTRACE_TEST_NAME); + /* filter only on our function */ - ftrace_set_filter(STR(DYN_FTRACE_TEST_NAME), - sizeof(STR(DYN_FTRACE_TEST_NAME)), 1); + ftrace_set_filter(func_name, strlen(func_name), 1); /* enable tracing */ tr->ctrl = 1; -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/