| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 19 May 2008 11:10:31 +1000
From: NeilBrown <neilb@...e.de>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Dan Williams <dan.j.williams@...el.com>
Subject: [PATCH 004 of 10] md: md: raid5 rate limit error printk
From: Bernd Schubert <bernd-schubert@....de>
last night we had scsi problems and a hardware raid
unit was offlined during heavy i/o. While this happened we got for
about 3 minutes a huge number messages like these
Apr 12 03:36:07 pfs1n14 kernel: [197510.696595] raid5:md7: read error not correctable (sector 2993096568 on sdj2).
I guess the high error rate is responsible for not scheduling other
events - during this time the system was not pingable and in the end
also other devices run into scsi command timeouts causing problems on
these unrelated devices as well.
Signed-off-by: Bernd Schubert <bernd-schubert@....de>
Signed-off-by: Dan Williams <dan.j.williams@...el.com>
Signed-off-by: Neil Brown <neilb@...e.de>
### Diffstat output
./drivers/md/raid5.c | 34 ++++++++++++++++++++++------------
1 file changed, 22 insertions(+), 12 deletions(-)
diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2008-05-19 11:02:09.000000000 +1000
+++ ./drivers/md/raid5.c 2008-05-19 11:02:44.000000000 +1000
@@ -94,6 +94,8 @@
#define __inline__
#endif
+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
#if !RAID6_USE_EMPTY_ZERO_PAGE
/* In .bss so it's zeroed */
const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
@@ -1143,10 +1145,12 @@ static void raid5_end_read_request(struc
set_bit(R5_UPTODATE, &sh->dev[i].flags);
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
- printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
- mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdevname(rdev->bdev, b));
+ printk_rl(KERN_INFO "raid5:%s: read error corrected"
+ " (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
@@ -1160,16 +1164,22 @@ static void raid5_end_read_request(struc
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error not correctable "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error NOT corrected!! "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists