[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <DCEAAC0833DD314AB0B58112AD99B93B04690162@ismail.innsys.innovsys.com>
Date: Mon, 19 May 2008 14:41:10 -0500
From: "Rune Torgersen" <runet@...ovsys.com>
To: "Scott Wood" <scottwood@...escale.com>
Cc: <linux-kernel@...r.kernel.org>, <linuxppc-dev@...abs.org>,
<linux-ide@...r.kernel.org>
Subject: RE: Oops with PREEMPT-RT on 2.6.25.4
Scott Wood wrote:
> Rune Torgersen wrote:
>> Hi
>> I get the following oops when trying to boot a arch/powerpc kernel
>> with preempt-rt installed (v2.6.25.4-rt1)
>> The board is using a Freescale 8280 as the main CPU and a Silicon
>> Image SII3124 SATA controller. The oops seems to happen on
>> fileaccess right after init starts.
> [snip]
>> NIP [c0249618] rt_spin_lock_slowlock+0x9c/0x200
>> LR [c02495ec] rt_spin_lock_slowlock+0x70/0x200
>> Call Trace:
>> [ef29d600] [c02495ec] rt_spin_lock_slowlock+0x70/0x200 (unreliable)
>> [ef29d670] [c00277d0] lock_timer_base+0x2c/0x64
>> [ef29d690] [c00285e8] del_timer+0x2c/0x78
>> [ef29d6b0] [c019d108] scsi_delete_timer+0x1c/0x3c
>> [ef29d6d0] [c01992d0] scsi_done+0x18/0x4c
>> [ef29d6f0] [c01b19dc] ata_scsi_qc_complete+0x364/0x380
>> [ef29d720] [c01a8708] __ata_qc_complete+0xd8/0xec
>> [ef29d740] [c01b011c] ata_qc_complete_multiple+0xc4/0xec
>> [ef29d760] [c01bcaf4] sil24_interrupt+0x46c/0x52c
>> [ef29d7a0] [c0048954] handle_IRQ_event+0x64/0x100
>> [ef29d7d0] [c0048b30] __do_IRQ+0x140/0x1bc
>> [ef29d7f0] [c00166c4] apmax_int_irq_demux+0x8c/0xb0
>> [ef29d810] [c0006448] do_IRQ+0x68/0xa8
>> [ef29d820] [c0010388] ret_from_except+0x0/0x14
>> --- Exception: 501 at __spin_unlock_irqrestore+0x28/0x4c
>> LR = __spin_unlock_irqrestore+0x20/0x4c
>> [ef29d8f0] [c0249600] rt_spin_lock_slowlock+0x84/0x200
>> [ef29d960] [c00277d0] lock_timer_base+0x2c/0x64
>
> You're recursively entering lock_timer_base, which does a
> spin_lock_irqsave(). Either interrupts are enabled when they should
> not be, or an interrupt was supposed to be threaded that isn't.
Sort of figured. How do I figure out which one, and how to fix it?
I've never gotten any -rt patchsets to work on this CPU, and it always
seems to be related to the disk driver.
I've tried since 2.6.16 ppc.... (2.6.16, 2.6.18 on ppc, 2.6.24 and 25 on
powerpc)
Even though this is a custom board, I'm pretty sure I can get it to fail
on a pq2fads board with the same disk controller.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists