| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080520151528.GA1596@elf.ucw.cz>
Date: Tue, 20 May 2008 17:15:45 +0200
From: Pavel Machek <pavel@...e.cz>
To: kernel list <linux-kernel@...r.kernel.org>,
Ingo Molnar <mingo@...e.hu>
Subject: Unify common parts of i8259.c
Merge common parts of i8259_{32,64} into i8259.c.
Signed-off-by: Pavel Machek <pavel@...e.cz>
---
commit 4544eda7dd9bc73061bc308130ed03e8b81f4f61
tree 6a4adc5a6661136352f6ff362d9574142ab0c246
parent 3576982b19d0fbd81f8d31d0475bf7b374010cb5
author Pavel <pavel@....ucw.cz> Tue, 20 May 2008 17:14:29 +0200
committer Pavel <pavel@....ucw.cz> Tue, 20 May 2008 17:14:29 +0200
arch/x86/kernel/Makefile | 2
arch/x86/kernel/i8259.c | 323 +++++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/i8259_32.c | 297 ----------------------------------------
arch/x86/kernel/i8259_64.c | 312 ------------------------------------------
include/asm-x86/hw_irq_32.h | 20 +++
include/asm-x86/i8259.h | 2
6 files changed, 347 insertions(+), 609 deletions(-)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5e618c3..f71a76e 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp)
obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
-obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o
+obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
new file mode 100644
index 0000000..8103646
--- /dev/null
+++ b/arch/x86/kernel/i8259.c
@@ -0,0 +1,323 @@
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/i8259.h>
+
+/*
+ * This is the 'legacy' 8259A Programmable Interrupt Controller,
+ * present in the majority of PC/AT boxes.
+ * plus some generic x86 specific things if generic specifics makes
+ * any sense at all.
+ * this file should become arch/i386/kernel/irq.c when the old irq.c
+ * moves to arch independent land
+ */
+
+static int i8259A_auto_eoi;
+DEFINE_SPINLOCK(i8259A_lock);
+static void mask_and_ack_8259A(unsigned int);
+
+struct irq_chip i8259A_chip = {
+ .name = "XT-PIC",
+ .mask = disable_8259A_irq,
+ .disable = disable_8259A_irq,
+ .unmask = enable_8259A_irq,
+ .mask_ack = mask_and_ack_8259A,
+};
+
+/*
+ * 8259A PIC functions to handle ISA devices:
+ */
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+unsigned int cached_irq_mask = 0xffff;
+
+/*
+ * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
+ * boards the timer interrupt is not really connected to any IO-APIC pin,
+ * it's fed to the master 8259A's IR0 line only.
+ *
+ * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
+ * this 'mixed mode' IRQ handling costs nothing because it's only used
+ * at IRQ setup time.
+ */
+unsigned long io_apic_irqs;
+
+void disable_8259A_irq(unsigned int irq)
+{
+ unsigned int mask = 1 << irq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ cached_irq_mask |= mask;
+ if (irq & 8)
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ else
+ outb(cached_master_mask, PIC_MASTER_IMR);
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void enable_8259A_irq(unsigned int irq)
+{
+ unsigned int mask = ~(1 << irq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ cached_irq_mask &= mask;
+ if (irq & 8)
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ else
+ outb(cached_master_mask, PIC_MASTER_IMR);
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+int i8259A_irq_pending(unsigned int irq)
+{
+ unsigned int mask = 1<<irq;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ if (irq < 8)
+ ret = inb(PIC_MASTER_CMD) & mask;
+ else
+ ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+
+ return ret;
+}
+
+void make_8259A_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ io_apic_irqs &= ~(1<<irq);
+ set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
+ "XT");
+ enable_irq(irq);
+}
+
+/*
+ * This function assumes to be called rarely. Switching between
+ * 8259A registers is slow.
+ * This has to be protected by the irq controller spinlock
+ * before being called.
+ */
+static inline int i8259A_irq_real(unsigned int irq)
+{
+ int value;
+ int irqmask = 1<<irq;
+
+ if (irq < 8) {
+ outb(0x0B,PIC_MASTER_CMD); /* ISR register */
+ value = inb(PIC_MASTER_CMD) & irqmask;
+ outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */
+ return value;
+ }
+ outb(0x0B,PIC_SLAVE_CMD); /* ISR register */
+ value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
+ outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */
+ return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+static void mask_and_ack_8259A(unsigned int irq)
+{
+ unsigned int irqmask = 1 << irq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+ /*
+ * Lightweight spurious IRQ detection. We do not want
+ * to overdo spurious IRQ handling - it's usually a sign
+ * of hardware problems, so we only do the checks we can
+ * do without slowing down good hardware unnecessarily.
+ *
+ * Note that IRQ7 and IRQ15 (the two spurious IRQs
+ * usually resulting from the 8259A-1|2 PICs) occur
+ * even if the IRQ is masked in the 8259A. Thus we
+ * can check spurious 8259A IRQs without doing the
+ * quite slow i8259A_irq_real() call for every IRQ.
+ * This does not cover 100% of spurious interrupts,
+ * but should be enough to warn the user that there
+ * is something bad going on ...
+ */
+ if (cached_irq_mask & irqmask)
+ goto spurious_8259A_irq;
+ cached_irq_mask |= irqmask;
+
+handle_real_irq:
+ if (irq & 8) {
+ inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
+ outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+ } else {
+ inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
+ outb(cached_master_mask, PIC_MASTER_IMR);
+ outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
+ }
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+ return;
+
+spurious_8259A_irq:
+ /*
+ * this is the slow path - should happen rarely.
+ */
+ if (i8259A_irq_real(irq))
+ /*
+ * oops, the IRQ _is_ in service according to the
+ * 8259A - not spurious, go handle it.
+ */
+ goto handle_real_irq;
+
+ {
+ static int spurious_irq_mask;
+ /*
+ * At this point we can be sure the IRQ is spurious,
+ * lets ACK and report it. [once per IRQ]
+ */
+ if (!(spurious_irq_mask & irqmask)) {
+ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+ spurious_irq_mask |= irqmask;
+ }
+ atomic_inc(&irq_err_count);
+ /*
+ * Theoretically we do not have to handle this IRQ,
+ * but in Linux this does not cause problems and is
+ * simpler for us.
+ */
+ goto handle_real_irq;
+ }
+}
+
+static char irq_trigger[2];
+/**
+ * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
+ */
+static void restore_ELCR(char *trigger)
+{
+ outb(trigger[0], 0x4d0);
+ outb(trigger[1], 0x4d1);
+}
+
+static void save_ELCR(char *trigger)
+{
+ /* IRQ 0,1,2,8,13 are marked as reserved */
+ trigger[0] = inb(0x4d0) & 0xF8;
+ trigger[1] = inb(0x4d1) & 0xDE;
+}
+
+static int i8259A_resume(struct sys_device *dev)
+{
+ init_8259A(i8259A_auto_eoi);
+ restore_ELCR(irq_trigger);
+ return 0;
+}
+
+static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
+{
+ save_ELCR(irq_trigger);
+ return 0;
+}
+
+static int i8259A_shutdown(struct sys_device *dev)
+{
+ /* Put the i8259A into a quiescent state that
+ * the kernel initialization code can get it
+ * out of.
+ */
+ outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
+ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
+ return 0;
+}
+
+static struct sysdev_class i8259_sysdev_class = {
+ .name = "i8259",
+ .suspend = i8259A_suspend,
+ .resume = i8259A_resume,
+ .shutdown = i8259A_shutdown,
+};
+
+static struct sys_device device_i8259A = {
+ .id = 0,
+ .cls = &i8259_sysdev_class,
+};
+
+static int __init i8259A_init_sysfs(void)
+{
+ int error = sysdev_class_register(&i8259_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_i8259A);
+ return error;
+}
+
+device_initcall(i8259A_init_sysfs);
+
+void init_8259A(int auto_eoi)
+{
+ unsigned long flags;
+
+ i8259A_auto_eoi = auto_eoi;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+
+ outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
+ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
+
+ /*
+ * outb_pic - this has to work on a wide range of PC hardware.
+ */
+ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
+ /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 or 32-bit and 0x30-0x37 on 64-bit */
+ outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
+ outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */
+ if (auto_eoi) /* master does Auto EOI */
+ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+ else /* master expects normal EOI */
+ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+
+ outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
+ /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f / 0x38-0x3f */
+ outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
+ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */
+ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+ if (auto_eoi)
+ /*
+ * In AEOI mode we just have to mask the interrupt
+ * when acking.
+ */
+ i8259A_chip.mask_ack = disable_8259A_irq;
+ else
+ i8259A_chip.mask_ack = mask_and_ack_8259A;
+
+ udelay(100); /* wait for 8259A to initialize */
+
+ outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+ outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
+
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c
index fe63196..8cdd9c3 100644
--- a/arch/x86/kernel/i8259_32.c
+++ b/arch/x86/kernel/i8259_32.c
@@ -21,302 +21,6 @@ #include <asm/apic.h>
#include <asm/arch_hooks.h>
#include <asm/i8259.h>
-/*
- * This is the 'legacy' 8259A Programmable Interrupt Controller,
- * present in the majority of PC/AT boxes.
- * plus some generic x86 specific things if generic specifics makes
- * any sense at all.
- */
-
-static int i8259A_auto_eoi;
-DEFINE_SPINLOCK(i8259A_lock);
-static void mask_and_ack_8259A(unsigned int);
-
-static struct irq_chip i8259A_chip = {
- .name = "XT-PIC",
- .mask = disable_8259A_irq,
- .disable = disable_8259A_irq,
- .unmask = enable_8259A_irq,
- .mask_ack = mask_and_ack_8259A,
-};
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-unsigned int cached_irq_mask = 0xffff;
-
-/*
- * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
- * boards the timer interrupt is not really connected to any IO-APIC pin,
- * it's fed to the master 8259A's IR0 line only.
- *
- * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
- * this 'mixed mode' IRQ handling costs nothing because it's only used
- * at IRQ setup time.
- */
-unsigned long io_apic_irqs;
-
-void disable_8259A_irq(unsigned int irq)
-{
- unsigned int mask = 1 << irq;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- cached_irq_mask |= mask;
- if (irq & 8)
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- else
- outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-void enable_8259A_irq(unsigned int irq)
-{
- unsigned int mask = ~(1 << irq);
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- cached_irq_mask &= mask;
- if (irq & 8)
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- else
- outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-int i8259A_irq_pending(unsigned int irq)
-{
- unsigned int mask = 1<<irq;
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- if (irq < 8)
- ret = inb(PIC_MASTER_CMD) & mask;
- else
- ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-
- return ret;
-}
-
-void make_8259A_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- io_apic_irqs &= ~(1<<irq);
- set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
- "XT");
- enable_irq(irq);
-}
-
-/*
- * This function assumes to be called rarely. Switching between
- * 8259A registers is slow.
- * This has to be protected by the irq controller spinlock
- * before being called.
- */
-static inline int i8259A_irq_real(unsigned int irq)
-{
- int value;
- int irqmask = 1<<irq;
-
- if (irq < 8) {
- outb(0x0B,PIC_MASTER_CMD); /* ISR register */
- value = inb(PIC_MASTER_CMD) & irqmask;
- outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */
- return value;
- }
- outb(0x0B,PIC_SLAVE_CMD); /* ISR register */
- value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
- outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */
- return value;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-static void mask_and_ack_8259A(unsigned int irq)
-{
- unsigned int irqmask = 1 << irq;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- /*
- * Lightweight spurious IRQ detection. We do not want
- * to overdo spurious IRQ handling - it's usually a sign
- * of hardware problems, so we only do the checks we can
- * do without slowing down good hardware unnecessarily.
- *
- * Note that IRQ7 and IRQ15 (the two spurious IRQs
- * usually resulting from the 8259A-1|2 PICs) occur
- * even if the IRQ is masked in the 8259A. Thus we
- * can check spurious 8259A IRQs without doing the
- * quite slow i8259A_irq_real() call for every IRQ.
- * This does not cover 100% of spurious interrupts,
- * but should be enough to warn the user that there
- * is something bad going on ...
- */
- if (cached_irq_mask & irqmask)
- goto spurious_8259A_irq;
- cached_irq_mask |= irqmask;
-
-handle_real_irq:
- if (irq & 8) {
- inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
- outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
- } else {
- inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
- outb(cached_master_mask, PIC_MASTER_IMR);
- outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
- }
- spin_unlock_irqrestore(&i8259A_lock, flags);
- return;
-
-spurious_8259A_irq:
- /*
- * this is the slow path - should happen rarely.
- */
- if (i8259A_irq_real(irq))
- /*
- * oops, the IRQ _is_ in service according to the
- * 8259A - not spurious, go handle it.
- */
- goto handle_real_irq;
-
- {
- static int spurious_irq_mask;
- /*
- * At this point we can be sure the IRQ is spurious,
- * lets ACK and report it. [once per IRQ]
- */
- if (!(spurious_irq_mask & irqmask)) {
- printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
- spurious_irq_mask |= irqmask;
- }
- atomic_inc(&irq_err_count);
- /*
- * Theoretically we do not have to handle this IRQ,
- * but in Linux this does not cause problems and is
- * simpler for us.
- */
- goto handle_real_irq;
- }
-}
-
-static char irq_trigger[2];
-/**
- * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
- */
-static void restore_ELCR(char *trigger)
-{
- outb(trigger[0], 0x4d0);
- outb(trigger[1], 0x4d1);
-}
-
-static void save_ELCR(char *trigger)
-{
- /* IRQ 0,1,2,8,13 are marked as reserved */
- trigger[0] = inb(0x4d0) & 0xF8;
- trigger[1] = inb(0x4d1) & 0xDE;
-}
-
-static int i8259A_resume(struct sys_device *dev)
-{
- init_8259A(i8259A_auto_eoi);
- restore_ELCR(irq_trigger);
- return 0;
-}
-
-static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
-{
- save_ELCR(irq_trigger);
- return 0;
-}
-
-static int i8259A_shutdown(struct sys_device *dev)
-{
- /* Put the i8259A into a quiescent state that
- * the kernel initialization code can get it
- * out of.
- */
- outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
- return 0;
-}
-
-static struct sysdev_class i8259_sysdev_class = {
- .name = "i8259",
- .suspend = i8259A_suspend,
- .resume = i8259A_resume,
- .shutdown = i8259A_shutdown,
-};
-
-static struct sys_device device_i8259A = {
- .id = 0,
- .cls = &i8259_sysdev_class,
-};
-
-static int __init i8259A_init_sysfs(void)
-{
- int error = sysdev_class_register(&i8259_sysdev_class);
- if (!error)
- error = sysdev_register(&device_i8259A);
- return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
-void init_8259A(int auto_eoi)
-{
- unsigned long flags;
-
- i8259A_auto_eoi = auto_eoi;
-
- spin_lock_irqsave(&i8259A_lock, flags);
-
- outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
-
- /*
- * outb_pic - this has to work on a wide range of PC hardware.
- */
- outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
- outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
- outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */
- if (auto_eoi) /* master does Auto EOI */
- outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
- else /* master expects normal EOI */
- outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
-
- outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
- outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
- outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */
- outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
- if (auto_eoi)
- /*
- * In AEOI mode we just have to mask the interrupt
- * when acking.
- */
- i8259A_chip.mask_ack = disable_8259A_irq;
- else
- i8259A_chip.mask_ack = mask_and_ack_8259A;
-
- udelay(100); /* wait for 8259A to initialize */
-
- outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
- outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
-
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
/*
* Note that on a 486, we don't want to do a SIGFPE on an irq13
@@ -351,6 +55,7 @@ static struct irqaction fpu_irq = {
.name = "fpu",
};
+
void __init init_ISA_irqs (void)
{
int i;
diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c
index fa57a15..8bb24b9 100644
--- a/arch/x86/kernel/i8259_64.c
+++ b/arch/x86/kernel/i8259_64.c
@@ -88,318 +88,6 @@ #undef IRQ
#undef IRQLIST_16
/*
- * This is the 'legacy' 8259A Programmable Interrupt Controller,
- * present in the majority of PC/AT boxes.
- * plus some generic x86 specific things if generic specifics makes
- * any sense at all.
- * this file should become arch/i386/kernel/irq.c when the old irq.c
- * moves to arch independent land
- */
-
-static int i8259A_auto_eoi;
-DEFINE_SPINLOCK(i8259A_lock);
-static void mask_and_ack_8259A(unsigned int);
-
-static struct irq_chip i8259A_chip = {
- .name = "XT-PIC",
- .mask = disable_8259A_irq,
- .disable = disable_8259A_irq,
- .unmask = enable_8259A_irq,
- .mask_ack = mask_and_ack_8259A,
-};
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-unsigned int cached_irq_mask = 0xffff;
-
-/*
- * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
- * boards the timer interrupt is not really connected to any IO-APIC pin,
- * it's fed to the master 8259A's IR0 line only.
- *
- * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
- * this 'mixed mode' IRQ handling costs nothing because it's only used
- * at IRQ setup time.
- */
-unsigned long io_apic_irqs;
-
-void disable_8259A_irq(unsigned int irq)
-{
- unsigned int mask = 1 << irq;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- cached_irq_mask |= mask;
- if (irq & 8)
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- else
- outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-void enable_8259A_irq(unsigned int irq)
-{
- unsigned int mask = ~(1 << irq);
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- cached_irq_mask &= mask;
- if (irq & 8)
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- else
- outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-int i8259A_irq_pending(unsigned int irq)
-{
- unsigned int mask = 1<<irq;
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- if (irq < 8)
- ret = inb(PIC_MASTER_CMD) & mask;
- else
- ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-
- return ret;
-}
-
-void make_8259A_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- io_apic_irqs &= ~(1<<irq);
- set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
- "XT");
- enable_irq(irq);
-}
-
-/*
- * This function assumes to be called rarely. Switching between
- * 8259A registers is slow.
- * This has to be protected by the irq controller spinlock
- * before being called.
- */
-static inline int i8259A_irq_real(unsigned int irq)
-{
- int value;
- int irqmask = 1<<irq;
-
- if (irq < 8) {
- outb(0x0B,PIC_MASTER_CMD); /* ISR register */
- value = inb(PIC_MASTER_CMD) & irqmask;
- outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */
- return value;
- }
- outb(0x0B,PIC_SLAVE_CMD); /* ISR register */
- value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
- outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */
- return value;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-static void mask_and_ack_8259A(unsigned int irq)
-{
- unsigned int irqmask = 1 << irq;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- /*
- * Lightweight spurious IRQ detection. We do not want
- * to overdo spurious IRQ handling - it's usually a sign
- * of hardware problems, so we only do the checks we can
- * do without slowing down good hardware unnecessarily.
- *
- * Note that IRQ7 and IRQ15 (the two spurious IRQs
- * usually resulting from the 8259A-1|2 PICs) occur
- * even if the IRQ is masked in the 8259A. Thus we
- * can check spurious 8259A IRQs without doing the
- * quite slow i8259A_irq_real() call for every IRQ.
- * This does not cover 100% of spurious interrupts,
- * but should be enough to warn the user that there
- * is something bad going on ...
- */
- if (cached_irq_mask & irqmask)
- goto spurious_8259A_irq;
- cached_irq_mask |= irqmask;
-
-handle_real_irq:
- if (irq & 8) {
- inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- /* 'Specific EOI' to slave */
- outb(0x60+(irq&7),PIC_SLAVE_CMD);
- /* 'Specific EOI' to master-IRQ2 */
- outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD);
- } else {
- inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
- outb(cached_master_mask, PIC_MASTER_IMR);
- /* 'Specific EOI' to master */
- outb(0x60+irq,PIC_MASTER_CMD);
- }
- spin_unlock_irqrestore(&i8259A_lock, flags);
- return;
-
-spurious_8259A_irq:
- /*
- * this is the slow path - should happen rarely.
- */
- if (i8259A_irq_real(irq))
- /*
- * oops, the IRQ _is_ in service according to the
- * 8259A - not spurious, go handle it.
- */
- goto handle_real_irq;
-
- {
- static int spurious_irq_mask;
- /*
- * At this point we can be sure the IRQ is spurious,
- * lets ACK and report it. [once per IRQ]
- */
- if (!(spurious_irq_mask & irqmask)) {
- printk(KERN_DEBUG
- "spurious 8259A interrupt: IRQ%d.\n", irq);
- spurious_irq_mask |= irqmask;
- }
- atomic_inc(&irq_err_count);
- /*
- * Theoretically we do not have to handle this IRQ,
- * but in Linux this does not cause problems and is
- * simpler for us.
- */
- goto handle_real_irq;
- }
-}
-
-static char irq_trigger[2];
-/**
- * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
- */
-static void restore_ELCR(char *trigger)
-{
- outb(trigger[0], 0x4d0);
- outb(trigger[1], 0x4d1);
-}
-
-static void save_ELCR(char *trigger)
-{
- /* IRQ 0,1,2,8,13 are marked as reserved */
- trigger[0] = inb(0x4d0) & 0xF8;
- trigger[1] = inb(0x4d1) & 0xDE;
-}
-
-static int i8259A_resume(struct sys_device *dev)
-{
- init_8259A(i8259A_auto_eoi);
- restore_ELCR(irq_trigger);
- return 0;
-}
-
-static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
-{
- save_ELCR(irq_trigger);
- return 0;
-}
-
-static int i8259A_shutdown(struct sys_device *dev)
-{
- /* Put the i8259A into a quiescent state that
- * the kernel initialization code can get it
- * out of.
- */
- outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
- return 0;
-}
-
-static struct sysdev_class i8259_sysdev_class = {
- .name = "i8259",
- .suspend = i8259A_suspend,
- .resume = i8259A_resume,
- .shutdown = i8259A_shutdown,
-};
-
-static struct sys_device device_i8259A = {
- .id = 0,
- .cls = &i8259_sysdev_class,
-};
-
-static int __init i8259A_init_sysfs(void)
-{
- int error = sysdev_class_register(&i8259_sysdev_class);
- if (!error)
- error = sysdev_register(&device_i8259A);
- return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
-void init_8259A(int auto_eoi)
-{
- unsigned long flags;
-
- i8259A_auto_eoi = auto_eoi;
-
- spin_lock_irqsave(&i8259A_lock, flags);
-
- outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
-
- /*
- * outb_pic - this has to work on a wide range of PC hardware.
- */
- outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
- /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
- outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
- /* 8259A-1 (the master) has a slave on IR2 */
- outb_pic(0x04, PIC_MASTER_IMR);
- if (auto_eoi) /* master does Auto EOI */
- outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
- else /* master expects normal EOI */
- outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
-
- outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
- /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
- outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
- /* 8259A-2 is a slave on master's IR2 */
- outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
- /* (slave's support for AEOI in flat mode is to be investigated) */
- outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
-
- if (auto_eoi)
- /*
- * In AEOI mode we just have to mask the interrupt
- * when acking.
- */
- i8259A_chip.mask_ack = disable_8259A_irq;
- else
- i8259A_chip.mask_ack = mask_and_ack_8259A;
-
- udelay(100); /* wait for 8259A to initialize */
-
- outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
- outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
-
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-
-
-
-/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
diff --git a/include/asm-x86/hw_irq_32.h b/include/asm-x86/hw_irq_32.h
index ea88054..91fdeb9 100644
--- a/include/asm-x86/hw_irq_32.h
+++ b/include/asm-x86/hw_irq_32.h
@@ -20,6 +20,26 @@ #include <asm/sections.h>
#define NMI_VECTOR 0x02
/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+#define IRQ0_VECTOR (0x20)
+#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
+#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
+#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
+#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
+#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
+#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
+#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
+#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
+#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
+#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
+
+/*
* Various low-level irq details needed by irq.c, process.c,
* time.c, io_apic.c and smp.c
*
diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h
index 45d4df3..2f98df9 100644
--- a/include/asm-x86/i8259.h
+++ b/include/asm-x86/i8259.h
@@ -55,4 +55,6 @@ static inline void outb_pic(unsigned cha
udelay(2);
}
+extern struct irq_chip i8259A_chip;
+
#endif /* __ASM_I8259_H__ */
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists