lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080522181821.GA6104@polina.dev.rtsoft.ru>
Date:	Thu, 22 May 2008 22:18:21 +0400
From:	Anton Vorontsov <avorontsov@...mvista.com>
To:	Kumar Gala <galak@...nel.crashing.org>,
	David Brownell <dbrownell@...rs.sourceforge.net>,
	Pierre Ossman <drzeus-mmc@...eus.cx>
Cc:	Jochen Friedrich <jochen@...am.de>,
	Timur Tabi <timur@...escale.com>, linuxppc-dev@...abs.org,
	linux-kernel@...r.kernel.org,
	spi-devel-general@...ts.sourceforge.net
Subject: [PATCH 1/3] mmc: add support for card-detection polling

Some hosts (and boards that use mmc_spi) do not use interrupts on the CD
line, so they can't trigger mmc_detect_change. We want to poll the card
and see if there was a change. 1 second poll interval seems resonable.

This patch also implements .get_cd() host operation, that could be used
by the hosts that are able to report card-detect status without need to
talk MMC.

Signed-off-by: Anton Vorontsov <avorontsov@...mvista.com>
---
 drivers/mmc/core/core.c  |   12 +++++++++---
 include/linux/mmc/host.h |    8 ++++++++
 2 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 01ced4c..ede5d1e 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -638,6 +638,9 @@ void mmc_rescan(struct work_struct *work)
 		 */
 		mmc_bus_put(host);
 
+		if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+			goto out;
+
 		mmc_claim_host(host);
 
 		mmc_power_up(host);
@@ -652,7 +655,7 @@ void mmc_rescan(struct work_struct *work)
 		if (!err) {
 			if (mmc_attach_sdio(host, ocr))
 				mmc_power_off(host);
-			return;
+			goto out;
 		}
 
 		/*
@@ -662,7 +665,7 @@ void mmc_rescan(struct work_struct *work)
 		if (!err) {
 			if (mmc_attach_sd(host, ocr))
 				mmc_power_off(host);
-			return;
+			goto out;
 		}
 
 		/*
@@ -672,7 +675,7 @@ void mmc_rescan(struct work_struct *work)
 		if (!err) {
 			if (mmc_attach_mmc(host, ocr))
 				mmc_power_off(host);
-			return;
+			goto out;
 		}
 
 		mmc_release_host(host);
@@ -683,6 +686,9 @@ void mmc_rescan(struct work_struct *work)
 
 		mmc_bus_put(host);
 	}
+out:
+	if (host->caps & MMC_CAP_NEEDS_POLL)
+		mmc_schedule_delayed_work(&host->detect, HZ);
 }
 
 void mmc_start_host(struct mmc_host *host)
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7ab962f..f2e9885 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -51,8 +51,15 @@ struct mmc_ios {
 
 struct mmc_host_ops {
 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	/*
+	 * Avoid calling these three functions too often or in a "fast path",
+	 * since underlaying controller might implement them in an expensive
+	 * and/or slow way.
+	 */
 	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
 	int	(*get_ro)(struct mmc_host *host);
+	int	(*get_cd)(struct mmc_host *host);
+
 	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
 };
 
@@ -94,6 +101,7 @@ struct mmc_host {
 #define MMC_CAP_SD_HIGHSPEED	(1 << 3)	/* Can do SD high-speed timing */
 #define MMC_CAP_SDIO_IRQ	(1 << 4)	/* Can signal pending SDIO IRQs */
 #define MMC_CAP_SPI		(1 << 5)	/* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL	(1 << 6)	/* Needs polling for card-detection */
 
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
-- 
1.5.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ