| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080523135557.27fe4855@bluebox.local>
Date: Fri, 23 May 2008 13:55:57 +0200
From: "Hans J. Koch" <hjk@...utronix.de>
To: Uwe Kleine-König <Uwe.Kleine-Koenig@...i.com>
Cc: <linux-kernel@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...e.de>,
Jan Altenberg <jan.altenberg@...utronix.de>,
Thomas Gleixner <tglx@...utronix.de>,
Magnus Damm <magnus.damm@...il.com>
Subject: Re: [PATCH 1/1] UIO: Add a write() function to enable/disable
interrupts
Am Fri, 23 May 2008 12:56:04 +0200
schrieb Uwe Kleine-König <Uwe.Kleine-Koenig@...i.com>:
> Hello Hans,
>
> Hans J. Koch wrote:
> > Am Fri, 23 May 2008 11:10:09 +0200
> > schrieb Uwe Kleine-König <Uwe.Kleine-Koenig@...i.com>:
> >
> > > Hans J. Koch wrote:
> > > > Am Fri, 23 May 2008 07:55:27 +0200
> > > > schrieb Uwe Kleine-König <Uwe.Kleine-Koenig@...i.com>:
> > > >
> > > > > Hello Hans,
> > > > >
> > > > > > - Copyright (c) 2006 by Hans-JÃŒrgen Koch.</para>
> > > > > > + Copyright (c) 2006-2008 by Hans-JÃŒrgen Koch.</para>
> > > > > This looks wrong.
> > > >
> > > > DocBook XML is supposed to be UTF-8.
> > > Correct. But still the problem is real. The headers of your mail
> > > claim the content to be encoded in UTF-8, but actually it's
> > > latin1. So I cannot apply the patch you sent with git am without
> > > hand editing.
> >
> > Try the version below.
> This one is better---I can apply it.
OK. Was a problem with my mail client.
>
> > + if (copy_from_user(&irq_on, buf, count))
> > + return -EFAULT;
> > +
> > + if (!idev->info->irqcontrol)
> > + return -ENOSYS;
> I would swap these two. copy_from_user is more expensive than testing
> idev->info->irqcontrol. (Is it really?) Anyhow only fetching a value
> from userspace if you really need it looks more clean to me.
Agreed. See updated version below.
>
> Otherwise the patch looks fine.
Thanks for your review! Could you add your Signed-off-by?
Hans
From: Hans J. Koch <hjk@...utronix.de>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...e.de>,
Jan Altenberg <jan.altenberg@...utronix.de>,
Thomas Gleixner <tglx@...utronix.de>,
Uwe Kleine-König <Uwe.Kleine-Koenig@...i.com>,
Magnus Damm <magnus.damm@...il.com>
Subject: UIO: Add write function to allow irq masking
Date: Thu, Fri, 23 May 2008 13:50:14 +0200
Sometimes it is necessary to enable/disable the interrupt of a UIO device
from the userspace part of the driver. With this patch, the UIO kernel driver
can implement an "irqcontrol()" function that does this. Userspace can write
an s32 value to /dev/uioX (usually 0 or 1 to turn the irq off or on). The
UIO core will then call the driver's irqcontrol function.
Signed-off-by: Hans J. Koch <hjk@...utronix.de>
---
Documentation/DocBook/uio-howto.tmpl | 40 ++++++++++++++++++++++++++++++++++-
drivers/uio/uio.c | 26 ++++++++++++++++++++++
include/linux/uio_driver.h | 2 +
3 files changed, 67 insertions(+), 1 deletion(-)
Index: linux-2.6.26-rc/include/linux/uio_driver.h
===================================================================
--- linux-2.6.26-rc.orig/include/linux/uio_driver.h 2008-05-22 20:22:57.000000000 +0200
+++ linux-2.6.26-rc/include/linux/uio_driver.h 2008-05-22 20:23:12.000000000 +0200
@@ -53,6 +53,7 @@
* @mmap: mmap operation for this uio device
* @open: open operation for this uio device
* @release: release operation for this uio device
+ * @irqcontrol: disable/enable irqs when 0/1 is written to /dev/uioX
*/
struct uio_info {
struct uio_device *uio_dev;
@@ -66,6 +67,7 @@
int (*mmap)(struct uio_info *info, struct vm_area_struct *vma);
int (*open)(struct uio_info *info, struct inode *inode);
int (*release)(struct uio_info *info, struct inode *inode);
+ int (*irqcontrol)(struct uio_info *info, s32 irq_on);
};
extern int __must_check
Index: linux-2.6.26-rc/drivers/uio/uio.c
===================================================================
--- linux-2.6.26-rc.orig/drivers/uio/uio.c 2008-05-22 20:23:07.000000000 +0200
+++ linux-2.6.26-rc/drivers/uio/uio.c 2008-05-23 13:49:40.000000000 +0200
@@ -420,6 +420,31 @@
return retval;
}
+static ssize_t uio_write(struct file *filep, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct uio_listener *listener = filep->private_data;
+ struct uio_device *idev = listener->dev;
+ ssize_t retval;
+ s32 irq_on;
+
+ if (idev->info->irq == UIO_IRQ_NONE)
+ return -EIO;
+
+ if (count != sizeof(s32))
+ return -EINVAL;
+
+ if (!idev->info->irqcontrol)
+ return -ENOSYS;
+
+ if (copy_from_user(&irq_on, buf, count))
+ return -EFAULT;
+
+ retval = idev->info->irqcontrol(idev->info, irq_on);
+
+ return retval ? retval : sizeof(s32);
+}
+
static int uio_find_mem_index(struct vm_area_struct *vma)
{
int mi;
@@ -539,6 +564,7 @@
.open = uio_open,
.release = uio_release,
.read = uio_read,
+ .write = uio_write,
.mmap = uio_mmap,
.poll = uio_poll,
.fasync = uio_fasync,
Index: linux-2.6.26-rc/Documentation/DocBook/uio-howto.tmpl
===================================================================
--- linux-2.6.26-rc.orig/Documentation/DocBook/uio-howto.tmpl 2008-05-22 20:22:57.000000000 +0200
+++ linux-2.6.26-rc/Documentation/DocBook/uio-howto.tmpl 2008-05-23 11:57:23.000000000 +0200
@@ -30,6 +30,12 @@
<revhistory>
<revision>
+ <revnumber>0.5</revnumber>
+ <date>2008-05-22</date>
+ <authorinitials>hjk</authorinitials>
+ <revremark>Added description of write() function.</revremark>
+ </revision>
+ <revision>
<revnumber>0.4</revnumber>
<date>2007-11-26</date>
<authorinitials>hjk</authorinitials>
@@ -64,7 +70,7 @@
<?dbhtml filename="copyright.html"?>
<title>Copyright and License</title>
<para>
- Copyright (c) 2006 by Hans-Jürgen Koch.</para>
+ Copyright (c) 2006-2008 by Hans-Jürgen Koch.</para>
<para>
This documentation is Free Software licensed under the terms of the
GPL version 2.
@@ -189,6 +195,30 @@
represents the total interrupt count. You can use this number
to figure out if you missed some interrupts.
</para>
+ <para>
+ For some hardware that has more than one interrupt source internally,
+ but not seperate IRQ mask and status registers, there might be
+ situations where userspace cannot determine what the interrupt source
+ was if the kernel handler disables them by writing to the chip's IRQ
+ register. In such a case, the kernel has to disable the IRQ completely
+ to leave the chip's register untouched. Now the userspace part can
+ determine the cause of the interrupt, but it cannot re-enable
+ interrupts. Another cornercase are chips where re-enabling interrupts
+ is a read-modify-write operation to a combined IRQ status/acknowledge
+ register. This would be racy if a new interrupt occured
+ simultaneously.
+ </para>
+ <para>
+ To address these problems, UIO also implements a write() function. It
+ is normally not used and can be ignored for hardware that has only a
+ single interrupt source or has seperate IRQ mask and status registers.
+ If you need it, however, a write to <filename>/dev/uioX</filename>
+ will call the <function>irqcontrol()</function> function implemented
+ by the driver. You have to write a 32-bit value that is usually either
+ 0 or 1 do disable or enable interrupts. If a driver does not implement
+ <function>irqcontrol()</function>, <function>write()</function> will
+ return with <varname>-ENOSYS</varname>.
+ </para>
<para>
To handle interrupts properly, your custom kernel module can
@@ -362,6 +392,14 @@
<function>open()</function>, you will probably also want a custom
<function>release()</function> function.
</para></listitem>
+
+<listitem><para>
+<varname>int (*irqcontrol)(struct uio_info *info, s32 irq_on)
+</varname>: Optional. If you need to be able to enable or disable
+interrupts from userspace by writing to <filename>/dev/uioX</filename>,
+you can implement this function. The parameter <varname>irq_on</varname>
+will be 0 to disable interrupts and 1 to enable them.
+</para></listitem>
</itemizedlist>
<para>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists