Linux version 2.6.26-rc3-sched-devel.git (yhlu@mpk12-office-77-136) (gcc version 4.2.1 (SUSE Linux)) #65 SMP PREEMPT Fri May 23 15:55:55 PDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffac00 (usable) BIOS-e820: 000000001fffac00 - 0000000020000000 (reserved) Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 0MB HIGHMEM available. 511MB LOWMEM available. low ram: 00622000 - 1fffa000 bootmap 00622000 - 00626000 early res: 0 [0-fff] BIOS data page early res: 1 [1000-1fff] EX TRAMPOLINE early res: 2 [6000-6fff] TRAMPOLINE early res: 3 [100000-619487] TEXT DATA BSS early res: 4 [1ea1f000-1ffe9e56] RAMDISK early res: 5 [619488-621fff] INIT_PG_TABLE early res: 6 [9fc00-fffff] BIOS reserved early res: 7 [622000-625fff] BOOTMAP Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00fccd0] 000fccd0 NX (Execute Disable) protection: active Entering add_active_range(0, 0, 131066) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131066 HighMem 131066 -> 131066 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131066 On node 0 totalpages: 131066 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125979 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.4 present. ACPI: RSDP 000EB0B0, 0024 (r2 Xen) ACPI: XSDT 000EB020, 0044 (r1 Xen HVM 0 HVML 0) ACPI: FACP 000EAE30, 00F4 (r4 Xen HVM 0 HVML 0) ACPI: DSDT 000EA040, 0D67 (r2 Xen HVM 0 INTL 20060707) ACPI: FACS 000EA000, 0040 ACPI: APIC 000EAF30, 0072 (r2 Xen HVM 0 HVML 0) ACPI: HPET 000EAFB0, 0038 (r1 Xen HVM 0 HVML 0) ACPI: SSDT 000EAFE8, 0038 (r2 Xen HVM 0 HVML 0) ACPI: DMI BIOS year==0, assuming ACPI-capable machine ACPI: PM-Timer IO Port: 0x1f48 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ5 used by override. ACPI: IRQ7 used by override. ACPI: IRQ9 used by override. ACPI: IRQ10 used by override. ACPI: IRQ11 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) SMP: Allowing 1 CPUs, 0 hotplug CPUs PERCPU: Allocating 37096 bytes of per cpu data NR_CPUS: 4, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130043 Kernel command line: rw root=/dev/ram0 console=tty0 console=uart8250,io,0x3f8,9600n8 apic=verbose pci=routeirq ip=dhcp ramdisk_size=131072 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 2493.395 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console handover: boot [uart0] -> real [ttyS0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 491344k/524264k available (3066k kernel code, 32304k reserved, 1436k data, 280k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff84000 - 0xfffff000 ( 492 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xe0800000 - 0xff9fe000 ( 497 MB) lowmem : 0xc0000000 - 0xdfffa000 ( 511 MB) .init : 0xc056c000 - 0xc05b2000 ( 280 kB) .data : 0xc03febff - 0xc0565ffc (1436 kB) .text : 0xc0100000 - 0xc03febff (3066 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 5014.51 BogoMIPS (lpj=10029037) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20080321 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0 not connected. IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23, 1-24, 1-25, 1-26, 1-27, 1-28, 1-29, 1-30, 1-31, 1-32, 1-33, 1-34, 1-35, 1-36, 1-37, 1-38, 1-39, 1-40, 1-41, 1-42, 1-43, 1-44, 1-45, 1-46, 1-47 not connected. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Quad-Core AMD Opteron(tm) Processor 8360 SE stepping 03 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 625666 ... PM timer delta = 358317 ... PM timer result ok ..... delta 625666 ..... mult: 26870470 ..... calibration result: 400426 ..... CPU clock speed is 2496.0229 MHz. ..... host bus clock speed is 100.0426 MHz. Brought up 1 CPUs Total of 1 processors activated (5014.51 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 632 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfa3b0, last bus=0 PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:01.1 reg 20 io port: [c000, c00f] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources pci 0000:00:01.2: quirk: region 1f40-1f7f claimed by PIIX4 ACPI PCI: 0000:00:01.3 reg 20 io port: [c020, c03f] PCI: 0000:00:02.0 reg 10 32bit mmio: [f0000000, f1ffffff] PCI: 0000:00:02.0 reg 14 32bit mmio: [f2000000, f2000fff] PCI: 0000:00:03.0 reg 10 io port: [c100, c1ff] PCI: 0000:00:03.0 reg 14 32bit mmio: [f3000000, f3ffffff] PCI: 0000:00:04.0 reg 10 io port: [c200, c2ff] PCI: 0000:00:04.0 reg 14 32bit mmio: [f4000000, f40000ff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt 0000:00:01.2[A] -> GSI 20 (level, low) -> IRQ 20 Int: type 0, pol 3, trig 3, bus 00, IRQ 04, APIC ID 1, APIC INT 14 ACPI: PCI Interrupt 0000:00:01.3[D] -> GSI 23 (level, low) -> IRQ 23 Int: type 0, pol 3, trig 3, bus 00, IRQ 07, APIC ID 1, APIC INT 17 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 28 (level, low) -> IRQ 28 Int: type 0, pol 3, trig 3, bus 00, IRQ 0c, APIC ID 1, APIC INT 1c ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 32 (level, low) -> IRQ 32 Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 1, APIC INT 20 number of MP IRQ sources: 19. number of IO-APIC #1 registers: 48. testing the IO APIC....................... IO APIC #1...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 002F0011 ....... : max redirection entries: 002F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 1 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 1 0 0 0 0 1 1 49 05 001 01 1 1 0 1 0 1 1 51 06 001 01 1 0 0 0 0 1 1 59 07 001 01 1 1 0 1 0 1 1 61 08 001 01 1 0 0 0 0 1 1 69 09 001 01 0 1 0 1 0 1 1 71 0a 001 01 1 1 0 1 0 1 1 79 0b 001 01 1 1 0 1 0 1 1 81 0c 001 01 1 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 001 01 1 1 0 1 0 1 1 A9 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 001 01 1 1 0 1 0 1 1 B1 18 000 00 1 0 0 0 0 0 0 00 19 000 00 1 0 0 0 0 0 0 00 1a 000 00 1 0 0 0 0 0 0 00 1b 000 00 1 0 0 0 0 0 0 00 1c 001 01 1 1 0 1 0 1 1 B9 1d 000 00 1 0 0 0 0 0 0 00 1e 000 00 1 0 0 0 0 0 0 00 1f 000 00 1 0 0 0 0 0 0 00 20 001 01 1 1 0 1 0 1 1 C1 21 000 00 1 0 0 0 0 0 0 00 22 000 00 1 0 0 0 0 0 0 00 23 000 00 1 0 0 0 0 0 0 00 24 000 00 1 0 0 0 0 0 0 00 25 000 00 1 0 0 0 0 0 0 00 26 000 00 1 0 0 0 0 0 0 00 27 000 00 1 0 0 0 0 0 0 00 28 000 00 1 0 0 0 0 0 0 00 29 000 00 1 0 0 0 0 0 0 00 2a 000 00 1 0 0 0 0 0 0 00 2b 000 00 1 0 0 0 0 0 0 00 2c 000 00 1 0 0 0 0 0 0 00 2d 000 00 1 0 0 0 0 0 0 00 2e 000 00 1 0 0 0 0 0 0 00 2f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ20 -> 0:20 IRQ23 -> 0:23 IRQ28 -> 0:28 IRQ32 -> 0:32 .................................... done. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 77918844 Hz system 00:00: iomem range 0x0-0x9ffff could not be reserved Switched to high resolution mode on CPU 0 system 00:03: ioport range 0x8a0-0x8a3 has been reserved system 00:03: ioport range 0xcc0-0xccf has been reserved system 00:03: ioport range 0x4d0-0x4d1 has been reserved bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 22315k freed kvm: no hardware support Machine check exception polling timer started. Total HugeTLB memory allocated, 0 SGI XFS with security attributes, no debug enabled msgmni has been set to 1003 for ipc namespace c053cec8 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds pci 0000:00:02.0: Boot video device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: ACPI0007:00 is registered as cooling_device0 hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 brd: module loaded pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered 8139too Fast Ethernet driver 0.9.28 8139too 0000:00:04.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip 8139too 0000:00:04.0: Use the "8139cp" driver for improved performance and stability. ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 32 (level, low) -> IRQ 32 Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 1, APIC INT 20 PCI: Setting latency timer of device 0000:00:04.0 to 64 8139too 0000:00:04.0: unknown chip version, assuming RTL-8139 8139too 0000:00:04.0: TxConfig = 0x74800000 eth0: RealTek RTL8139 at 0xc200, 00:16:3e:23:81:db, IRQ 32 eth0: Identified 8139 chip type 'RTL-8139' Driver 'sd' needs updating - please use bus_type methods usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:05: setting system clock to 2008-05-23 22:50:51 UTC (1211583051) input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 280k freed