| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20080528214044.16327.44511.sendpatchset@localhost.localdomain>
Date: Wed, 28 May 2008 23:40:44 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/21] ide: convert ide-timing.h to ide-timings.c library
* Don't include ide-timing.h in cs5535 and sis5513 host drivers
(they don't need it currently).
* Convert ide-timing.h to ide-timings.c library and add CONFIG_IDE_TIMINGS
config option to be selected by host drivers using the library.
While at it:
- fix ide_timing_find_mode() placement
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ide/Kconfig | 7 +
drivers/ide/Makefile | 1
drivers/ide/arm/palm_bk3710.c | 2
drivers/ide/ide-timing.h | 183 ------------------------------------------
drivers/ide/ide-timings.c | 179 +++++++++++++++++++++++++++++++++++++++++
drivers/ide/pci/amd74xx.c | 2
drivers/ide/pci/cs5535.c | 2
drivers/ide/pci/sis5513.c | 3
drivers/ide/pci/via82cxxx.c | 2
drivers/ide/ppc/pmac.c | 2
include/linux/ide.h | 5 +
11 files changed, 192 insertions(+), 196 deletions(-)
Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -98,6 +98,9 @@ if BLK_DEV_IDE
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
+config IDE_TIMINGS
+ bool
+
config IDE_ATAPI
bool
@@ -469,6 +472,7 @@ config BLK_DEV_ALI15X3
config BLK_DEV_AMD74XX
tristate "AMD and nVidia IDE support"
depends on !ARM
+ select IDE_TIMINGS
select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for AMD-7xx and AMD-8111 chips
@@ -725,6 +729,7 @@ config BLK_DEV_TRM290
config BLK_DEV_VIA82CXXX
tristate "VIA82CXXX chipset support"
+ select IDE_TIMINGS
select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for VIA BusMastering IDE chips.
@@ -751,6 +756,7 @@ endif
config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
+ select IDE_TIMINGS
help
This driver provides support for the on-board IDE controller on
most of the recent Apple Power Macintoshes and PowerBooks.
@@ -919,6 +925,7 @@ config BLK_DEV_Q40IDE
config BLK_DEV_PALMCHIP_BK3710
tristate "Palmchip bk3710 IDE controller support"
depends on ARCH_DAVINCI
+ select IDE_TIMINGS
select BLK_DEV_IDEDMA_SFF
help
Say Y here if you want to support the onchip IDE controller on the
Index: b/drivers/ide/Makefile
===================================================================
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o
# core IDE code
+ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
Index: b/drivers/ide/arm/palm_bk3710.c
===================================================================
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -74,8 +74,6 @@ struct palm_bk3710_udmatiming {
#define BK3710_IORDYTMP 0x78
#define BK3710_IORDYTMS 0x7C
-#include "../ide-timing.h"
-
static long ide_palm_clk;
static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
Index: b/drivers/ide/ide-timing.h
===================================================================
--- a/drivers/ide/ide-timing.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef _IDE_TIMING_H
-#define _IDE_TIMING_H
-
-/*
- * Copyright (c) 1999-2001 Vojtech Pavlik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@....cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/hdreg.h>
-
-/*
- * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
- * These were taken from ATA/ATAPI-6 standard, rev 0a, except
- * for PIO 5, which is a nonstandard extension and UDMA6, which
- * is currently supported only by Maxtor drives.
- */
-
-static struct ide_timing ide_timing[] = {
-
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
-
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
-
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
-
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
-
- { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
-
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
-
- { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 },
-
- { 0xff }
-};
-
-#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1)
-#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0)
-
-static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q,
- int T, int UT)
-{
- q->setup = EZ(t->setup * 1000, T);
- q->act8b = EZ(t->act8b * 1000, T);
- q->rec8b = EZ(t->rec8b * 1000, T);
- q->cyc8b = EZ(t->cyc8b * 1000, T);
- q->active = EZ(t->active * 1000, T);
- q->recover = EZ(t->recover * 1000, T);
- q->cycle = EZ(t->cycle * 1000, T);
- q->udma = EZ(t->udma * 1000, UT);
-}
-
-static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b,
- struct ide_timing *m, unsigned int what)
-{
- if (what & IDE_TIMING_SETUP)
- m->setup = max(a->setup, b->setup);
- if (what & IDE_TIMING_ACT8B)
- m->act8b = max(a->act8b, b->act8b);
- if (what & IDE_TIMING_REC8B)
- m->rec8b = max(a->rec8b, b->rec8b);
- if (what & IDE_TIMING_CYC8B)
- m->cyc8b = max(a->cyc8b, b->cyc8b);
- if (what & IDE_TIMING_ACTIVE)
- m->active = max(a->active, b->active);
- if (what & IDE_TIMING_RECOVER)
- m->recover = max(a->recover, b->recover);
- if (what & IDE_TIMING_CYCLE)
- m->cycle = max(a->cycle, b->cycle);
- if (what & IDE_TIMING_UDMA)
- m->udma = max(a->udma, b->udma);
-}
-
-static struct ide_timing *ide_timing_find_mode(u8 speed)
-{
- struct ide_timing *t;
-
- for (t = ide_timing; t->mode != speed; t++)
- if (t->mode == 0xff)
- return NULL;
- return t;
-}
-
-static int ide_timing_compute(ide_drive_t *drive, u8 speed,
- struct ide_timing *t, int T, int UT)
-{
- struct hd_driveid *id = drive->id;
- struct ide_timing *s, p;
-
- /*
- * Find the mode.
- */
- s = ide_timing_find_mode(speed);
- if (s == NULL)
- return -EINVAL;
-
- /*
- * Copy the timing from the table.
- */
- *t = *s;
-
- /*
- * If the drive is an EIDE drive, it can tell us it needs extended
- * PIO/MWDMA cycle timing.
- */
- if (id && id->field_valid & 2) { /* EIDE drive */
-
- memset(&p, 0, sizeof(p));
-
- if (speed <= XFER_PIO_2)
- p.cycle = p.cyc8b = id->eide_pio;
- else if (speed <= XFER_PIO_5)
- p.cycle = p.cyc8b = id->eide_pio_iordy;
- else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- p.cycle = id->eide_dma_min;
-
- ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
- }
-
- /*
- * Convert the timing to bus clock counts.
- */
- ide_timing_quantize(t, t, T, UT);
-
- /*
- * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
- * S.M.A.R.T and some other commands. We have to ensure that the
- * DMA cycle timing is slower/equal than the fastest PIO timing.
- */
- if (speed >= XFER_SW_DMA_0) {
- u8 pio = ide_get_best_pio_mode(drive, 255, 5);
- ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT);
- ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
- }
-
- /*
- * Lengthen active & recovery time so that cycle time is correct.
- */
- if (t->act8b + t->rec8b < t->cyc8b) {
- t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
- t->rec8b = t->cyc8b - t->act8b;
- }
-
- if (t->active + t->recover < t->cycle) {
- t->active += (t->cycle - (t->active + t->recover)) / 2;
- t->recover = t->cycle - t->active;
- }
-
- return 0;
-}
-
-#endif
Index: b/drivers/ide/ide-timings.c
===================================================================
--- /dev/null
+++ b/drivers/ide/ide-timings.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 1999-2001 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@....cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/kernel.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+
+/*
+ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
+ * These were taken from ATA/ATAPI-6 standard, rev 0a, except
+ * for PIO 5, which is a nonstandard extension and UDMA6, which
+ * is currently supported only by Maxtor drives.
+ */
+
+static struct ide_timing ide_timing[] = {
+
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
+
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
+
+ { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 },
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
+
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
+
+ { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 },
+
+ { 0xff }
+};
+
+struct ide_timing *ide_timing_find_mode(u8 speed)
+{
+ struct ide_timing *t;
+
+ for (t = ide_timing; t->mode != speed; t++)
+ if (t->mode == 0xff)
+ return NULL;
+ return t;
+}
+
+#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1)
+#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0)
+
+static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q,
+ int T, int UT)
+{
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
+}
+
+void ide_timing_merge(struct ide_timing *a, struct ide_timing *b,
+ struct ide_timing *m, unsigned int what)
+{
+ if (what & IDE_TIMING_SETUP)
+ m->setup = max(a->setup, b->setup);
+ if (what & IDE_TIMING_ACT8B)
+ m->act8b = max(a->act8b, b->act8b);
+ if (what & IDE_TIMING_REC8B)
+ m->rec8b = max(a->rec8b, b->rec8b);
+ if (what & IDE_TIMING_CYC8B)
+ m->cyc8b = max(a->cyc8b, b->cyc8b);
+ if (what & IDE_TIMING_ACTIVE)
+ m->active = max(a->active, b->active);
+ if (what & IDE_TIMING_RECOVER)
+ m->recover = max(a->recover, b->recover);
+ if (what & IDE_TIMING_CYCLE)
+ m->cycle = max(a->cycle, b->cycle);
+ if (what & IDE_TIMING_UDMA)
+ m->udma = max(a->udma, b->udma);
+}
+
+int ide_timing_compute(ide_drive_t *drive, u8 speed,
+ struct ide_timing *t, int T, int UT)
+{
+ struct hd_driveid *id = drive->id;
+ struct ide_timing *s, p;
+
+ /*
+ * Find the mode.
+ */
+ s = ide_timing_find_mode(speed);
+ if (s == NULL)
+ return -EINVAL;
+
+ /*
+ * Copy the timing from the table.
+ */
+ *t = *s;
+
+ /*
+ * If the drive is an EIDE drive, it can tell us it needs extended
+ * PIO/MWDMA cycle timing.
+ */
+ if (id && id->field_valid & 2) { /* EIDE drive */
+
+ memset(&p, 0, sizeof(p));
+
+ if (speed <= XFER_PIO_2)
+ p.cycle = p.cyc8b = id->eide_pio;
+ else if (speed <= XFER_PIO_5)
+ p.cycle = p.cyc8b = id->eide_pio_iordy;
+ else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+ p.cycle = id->eide_dma_min;
+
+ ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
+ }
+
+ /*
+ * Convert the timing to bus clock counts.
+ */
+ ide_timing_quantize(t, t, T, UT);
+
+ /*
+ * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
+ * S.M.A.R.T and some other commands. We have to ensure that the
+ * DMA cycle timing is slower/equal than the fastest PIO timing.
+ */
+ if (speed >= XFER_SW_DMA_0) {
+ u8 pio = ide_get_best_pio_mode(drive, 255, 5);
+ ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT);
+ ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
+ }
+
+ /*
+ * Lengthen active & recovery time so that cycle time is correct.
+ */
+ if (t->act8b + t->rec8b < t->cyc8b) {
+ t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
+ t->rec8b = t->cyc8b - t->act8b;
+ }
+
+ if (t->active + t->recover < t->cycle) {
+ t->active += (t->cycle - (t->active + t->recover)) / 2;
+ t->recover = t->cycle - t->active;
+ }
+
+ return 0;
+}
Index: b/drivers/ide/pci/amd74xx.c
===================================================================
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -21,8 +21,6 @@
#include <linux/init.h>
#include <linux/ide.h>
-#include "ide-timing.h"
-
enum {
AMD_IDE_CONFIG = 0x41,
AMD_CABLE_DETECT = 0x42,
Index: b/drivers/ide/pci/cs5535.c
===================================================================
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -26,8 +26,6 @@
#include <linux/pci.h>
#include <linux/ide.h>
-#include "ide-timing.h"
-
#define MSR_ATAC_BASE 0x51300000
#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -52,8 +52,6 @@
#include <linux/init.h>
#include <linux/ide.h>
-#include "ide-timing.h"
-
/* registers layout and init values are chipset family dependant */
#define ATA_16 0x01
@@ -616,7 +614,6 @@ MODULE_LICENSE("GPL");
/*
* TODO:
* - CLEANUP
- * - Use drivers/ide/ide-timing.h !
* - More checks in the config registers (force values instead of
* relying on the BIOS setting them correctly).
* - Further optimisations ?
Index: b/drivers/ide/pci/via82cxxx.c
===================================================================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -35,8 +35,6 @@
#include <asm/processor.h>
#endif
-#include "ide-timing.h"
-
#define VIA_IDE_ENABLE 0x40
#define VIA_IDE_CONFIG 0x41
#define VIA_FIFO_CONFIG 0x43
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -48,8 +48,6 @@
#include <asm/mediabay.h>
#endif
-#include "../ide-timing.h"
-
#undef IDE_PMAC_DEBUG
#define DMA_WAIT_TIMEOUT 50
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1284,6 +1284,11 @@ enum {
IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
};
+struct ide_timing *ide_timing_find_mode(u8);
+void ide_timing_merge(struct ide_timing *, struct ide_timing *,
+ struct ide_timing *, unsigned int);
+int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
+
typedef struct ide_pio_timings_s {
int setup_time; /* Address setup (ns) minimum */
int active_time; /* Active pulse (ns) minimum */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists