| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080528213831.GA3133@tuxdriver.com>
Date: Wed, 28 May 2008 17:38:31 -0400
From: "John W. Linville" <linville@...driver.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, linux-wireless@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: pull request: wireless-2.6 2008-05-28
David,
Another round of fixes for 2.6.26 follows...
Please let me know if there are problems!
Thanks,
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/
---
The following changes since commit 289c79a4bd350e8a25065102563ad1a183d1b402:
Patrick McHardy (1):
vlan: Use bitmask of feature flags instead of seperate feature bits
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master
Abhijeet Kolekar (1):
mac80211 : Fixes the status message for iwconfig
Andrea Merello (3):
rtl8180: fix wrong parameter in sa2400_rf_set_channel
rtl8180: fix wrong parameter in max2820_rf_set_channel
rtl8180: fix wrong parameter in grf5101_rf_set_channel
Guy Cohen (2):
iwlwifi: fix exit from stay_in_table state
iwlwifi: fix rate scale TLC column selection bug
Ivo van Doorn (4):
rt2x00: Fix memleak in tx() path
rt2x00: Don't count retries as failure
rt2x00: Reset antenna RSSI after switch
rt2x00: Use atomic interface iteration in irq context
John W. Linville (1):
rtl8180: avoid NULL dereference in max2820_rf_set_channel
Jussi Kivilinna (1):
rndis_wlan: add missing range check for power_output modparam
Michael Buesch (2):
b43: Upload both beacon templates on initial load
b43: Fix controller restart crash
Nicolas Kaiser (1):
net/mac80211: always true conditionals
Scott Ashcroft (1):
rndis_wlan: Make connections to TKIP PSK networks work
Senthil Balasubramanian (2):
mac80211: Fix for NULL pointer dereference in sta_info_get()
mac80211: fix alignment issue with compare_ether_addr()
Tomas Winkler (2):
mac80211: fix ieee80211_rx_bss_put/get imbalance
mac80211: reorder channel and freq reporting in wext scan report
Yi Zhu (1):
mac80211: fix a typo in ieee80211_handle_filtered_frame comment
drivers/net/wireless/b43/b43.h | 1 +
drivers/net/wireless/b43/main.c | 70 +++++++++++++++++++++------
drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 3 +-
drivers/net/wireless/rndis_wlan.c | 65 +++++++++++++++++++++++++-
drivers/net/wireless/rt2x00/rt2x00.h | 5 ++
drivers/net/wireless/rt2x00/rt2x00config.c | 1 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 8 ++--
drivers/net/wireless/rt2x00/rt2x00mac.c | 1 +
drivers/net/wireless/rtl8180_grf5101.c | 2 +-
drivers/net/wireless/rtl8180_max2820.c | 5 +-
drivers/net/wireless/rtl8180_sa2400.c | 2 +-
net/mac80211/cfg.c | 4 +-
net/mac80211/main.c | 2 +-
net/mac80211/mlme.c | 29 ++++++-----
net/mac80211/rx.c | 4 +-
net/mac80211/util.c | 4 +-
net/mac80211/wext.c | 11 +++-
17 files changed, 166 insertions(+), 51 deletions(-)
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 37783cd..dfa4bdd 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -737,6 +737,7 @@ struct b43_wl {
struct ieee80211_tx_control beacon_txctl;
bool beacon0_uploaded;
bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
/* The current QOS parameters for the 4 queues.
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 8fdba94..6c3d9ea 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1544,6 +1544,30 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev,
kfree(probe_resp_data);
}
+static void b43_upload_beacon0(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon0_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x68, 0x18);
+ /* FIXME: Probe resp upload doesn't really belong here,
+ * but we don't use that feature anyway. */
+ b43_write_probe_resp_template(dev, 0x268, 0x4A,
+ &__b43_ratetable[3]);
+ wl->beacon0_uploaded = 1;
+}
+
+static void b43_upload_beacon1(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon1_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x468, 0x1A);
+ wl->beacon1_uploaded = 1;
+}
+
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
@@ -1568,24 +1592,27 @@ static void handle_irq_beacon(struct b43_wldev *dev)
return;
}
- if (!beacon0_valid) {
- if (!wl->beacon0_uploaded) {
- b43_write_beacon_template(dev, 0x68, 0x18);
- b43_write_probe_resp_template(dev, 0x268, 0x4A,
- &__b43_ratetable[3]);
- wl->beacon0_uploaded = 1;
- }
+ if (unlikely(wl->beacon_templates_virgin)) {
+ /* We never uploaded a beacon before.
+ * Upload both templates now, but only mark one valid. */
+ wl->beacon_templates_virgin = 0;
+ b43_upload_beacon0(dev);
+ b43_upload_beacon1(dev);
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON0_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
- } else if (!beacon1_valid) {
- if (!wl->beacon1_uploaded) {
- b43_write_beacon_template(dev, 0x468, 0x1A);
- wl->beacon1_uploaded = 1;
+ } else {
+ if (!beacon0_valid) {
+ b43_upload_beacon0(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON0_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
+ } else if (!beacon1_valid) {
+ b43_upload_beacon1(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON1_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
- cmd = b43_read32(dev, B43_MMIO_MACCMD);
- cmd |= B43_MACCMD_BEACON1_VALID;
- b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
}
@@ -4073,6 +4100,9 @@ static int b43_op_start(struct ieee80211_hw *hw)
wl->filter_flags = 0;
wl->radiotap_enabled = 0;
b43_qos_clear(wl);
+ wl->beacon0_uploaded = 0;
+ wl->beacon1_uploaded = 0;
+ wl->beacon_templates_virgin = 1;
/* First register RFkill.
* LEDs that are registered later depend on it. */
@@ -4241,7 +4271,9 @@ static void b43_chip_reset(struct work_struct *work)
goto out;
}
}
- out:
+out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43err(wl, "Controller restart FAILED\n");
@@ -4382,9 +4414,11 @@ static void b43_one_core_detach(struct ssb_device *dev)
struct b43_wldev *wldev;
struct b43_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
@@ -4569,6 +4603,10 @@ static void b43_remove(struct ssb_device *dev)
struct b43_wl *wl = ssb_get_devtypedata(dev);
struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
index c9847b1..3a7f0cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
@@ -1162,7 +1162,6 @@ static s32 rs_get_best_rate(struct iwl_priv *priv,
/* Higher rate not available, use the original */
} else {
- new_rate = rate;
break;
}
}
@@ -2009,7 +2008,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
* 2) Not just finishing up a search
* 3) Allowing a new search
*/
- if (!update_lq && !done_search && !lq_sta->stay_in_tbl) {
+ if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
/* Save current throughput to compare with "search" throughput*/
lq_sta->last_tpt = current_tpt;
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index d0b1fb1..18c9931 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -116,6 +116,7 @@ MODULE_PARM_DESC(workaround_interval,
#define OID_802_11_ENCRYPTION_STATUS ccpu2(0x0d01011b)
#define OID_802_11_ADD_KEY ccpu2(0x0d01011d)
#define OID_802_11_REMOVE_KEY ccpu2(0x0d01011e)
+#define OID_802_11_ASSOCIATION_INFORMATION ccpu2(0x0d01011f)
#define OID_802_11_PMKID ccpu2(0x0d010123)
#define OID_802_11_NETWORK_TYPES_SUPPORTED ccpu2(0x0d010203)
#define OID_802_11_NETWORK_TYPE_IN_USE ccpu2(0x0d010204)
@@ -271,6 +272,26 @@ struct ndis_config_param {
__le32 value_length;
} __attribute__((packed));
+struct ndis_80211_assoc_info {
+ __le32 length;
+ __le16 req_ies;
+ struct req_ie {
+ __le16 capa;
+ __le16 listen_interval;
+ u8 cur_ap_address[6];
+ } req_ie;
+ __le32 req_ie_length;
+ __le32 offset_req_ies;
+ __le16 resp_ies;
+ struct resp_ie {
+ __le16 capa;
+ __le16 status_code;
+ __le16 assoc_id;
+ } resp_ie;
+ __le32 resp_ie_length;
+ __le32 offset_resp_ies;
+} __attribute__((packed));
+
/* these have to match what is in wpa_supplicant */
enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
@@ -674,6 +695,12 @@ static int get_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN])
return ret;
}
+static int get_association_info(struct usbnet *usbdev,
+ struct ndis_80211_assoc_info *info, int len)
+{
+ return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION,
+ info, &len);
+}
static int is_associated(struct usbnet *usbdev)
{
@@ -2182,11 +2209,40 @@ static void rndis_wext_worker(struct work_struct *work)
struct usbnet *usbdev = priv->usbdev;
union iwreq_data evt;
unsigned char bssid[ETH_ALEN];
- int ret;
+ struct ndis_80211_assoc_info *info;
+ int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32;
+ int ret, offset;
if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) {
- ret = get_bssid(usbdev, bssid);
+ info = kzalloc(assoc_size, GFP_KERNEL);
+ if (!info)
+ goto get_bssid;
+
+ /* Get association info IEs from device and send them back to
+ * userspace. */
+ ret = get_association_info(usbdev, info, assoc_size);
+ if (!ret) {
+ evt.data.length = le32_to_cpu(info->req_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_req_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCREQIE, &evt,
+ (char *)info + offset);
+ }
+
+ evt.data.length = le32_to_cpu(info->resp_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_resp_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCRESPIE, &evt,
+ (char *)info + offset);
+ }
+ }
+
+ kfree(info);
+get_bssid:
+ ret = get_bssid(usbdev, bssid);
if (!ret) {
evt.data.flags = 0;
evt.data.length = 0;
@@ -2414,6 +2470,11 @@ static int bcm4320_early_init(struct usbnet *dev)
else if (priv->param_power_save > 2)
priv->param_power_save = 2;
+ if (priv->param_power_output < 0)
+ priv->param_power_output = 0;
+ else if (priv->param_power_output > 3)
+ priv->param_power_output = 3;
+
if (priv->param_roamtrigger < -80)
priv->param_roamtrigger = -80;
else if (priv->param_roamtrigger > -60)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 57bdc15..611d983 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -328,6 +328,11 @@ static inline int rt2x00_get_link_ant_rssi(struct link *link)
return DEFAULT_RSSI;
}
+static inline void rt2x00_reset_link_ant_rssi(struct link *link)
+{
+ link->ant.rssi_ant = 0;
+}
+
static inline int rt2x00_get_link_ant_rssi_history(struct link *link,
enum antenna ant)
{
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index a9930a0..48608e8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -129,6 +129,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
*/
rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA);
rt2x00lib_reset_link_tuner(rt2x00dev);
+ rt2x00_reset_link_ant_rssi(&rt2x00dev->link);
rt2x00dev->link.ant.active.rx = libconf.ant.rx;
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b22c027..2673d56 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -483,9 +483,9 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- ieee80211_iterate_active_interfaces(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
- rt2x00dev);
+ ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
+ rt2x00lib_beacondone_iter,
+ rt2x00dev);
queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
}
@@ -507,7 +507,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
* Update TX statistics.
*/
rt2x00dev->link.qual.tx_success += success;
- rt2x00dev->link.qual.tx_failed += txdesc->retry + fail;
+ rt2x00dev->link.qual.tx_failed += fail;
/*
* Initialize TX status
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c206b50..87e280a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -93,6 +93,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
ieee80211_stop_queues(hw);
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c
index 5d47935..947ee55 100644
--- a/drivers/net/wireless/rtl8180_grf5101.c
+++ b/drivers/net/wireless/rtl8180_grf5101.c
@@ -88,7 +88,7 @@ static void grf5101_rf_set_channel(struct ieee80211_hw *dev,
write_grf5101(dev, 0x0B, chan);
write_grf5101(dev, 0x07, 0x1000);
- grf5101_write_phy_antenna(dev, chan);
+ grf5101_write_phy_antenna(dev, channel);
}
static void grf5101_rf_stop(struct ieee80211_hw *dev)
diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c
index a34dfd3..6c825fd 100644
--- a/drivers/net/wireless/rtl8180_max2820.c
+++ b/drivers/net/wireless/rtl8180_max2820.c
@@ -78,7 +78,8 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev,
struct ieee80211_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
- int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+ int channel = conf ?
+ ieee80211_frequency_to_channel(conf->channel->center_freq) : 1;
unsigned int chan_idx = channel - 1;
u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
u32 chan = max2820_chan[chan_idx];
@@ -87,7 +88,7 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev,
* sa2400, for MAXIM we do this directly from BB */
rtl8180_write_phy(dev, 3, txpw);
- max2820_write_phy_antenna(dev, chan);
+ max2820_write_phy_antenna(dev, channel);
write_max2820(dev, 3, chan);
}
diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c
index 0311b4e..cea4e0c 100644
--- a/drivers/net/wireless/rtl8180_sa2400.c
+++ b/drivers/net/wireless/rtl8180_sa2400.c
@@ -86,7 +86,7 @@ static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
write_sa2400(dev, 7, txpw);
- sa2400_write_phy_antenna(dev, chan);
+ sa2400_write_phy_antenna(dev, channel);
write_sa2400(dev, 0, chan);
write_sa2400(dev, 1, 0xbb50);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 699d97b..a9fce4a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -672,7 +672,7 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
} else
@@ -760,7 +760,7 @@ static int ieee80211_change_station(struct wiphy *wiphy,
if (params->vlan && params->vlan != sta->sdata->dev) {
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
vlansdata->vif.type != IEEE80211_IF_TYPE_AP) {
rcu_read_unlock();
return -EINVAL;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 915afad..5c87645 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1313,7 +1313,7 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
- * happen when it wakes up for the next time.
+ * when it wakes up for the next time.
*/
sta->flags |= WLAN_STA_CLEAR_PS_FILT;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 7cfd12e..841278f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1325,7 +1325,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
- kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+ kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
if (!tid_agg_rx->reorder_buf) {
if (net_ratelimit())
printk(KERN_ERR "can not allocate reordering buffer "
@@ -1334,7 +1334,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
- buf_size * sizeof(struct sk_buf *));
+ buf_size * sizeof(struct sk_buff *));
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
@@ -1614,7 +1614,7 @@ void sta_addba_resp_timer_expired(unsigned long data)
* only one argument, and both sta_info and TID are needed, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
- u16 tid = *(int *)data;
+ u16 tid = *(u8 *)data;
struct sta_info *temp_sta = container_of((void *)data,
struct sta_info, timer_to_tid[tid]);
@@ -1662,7 +1662,7 @@ timer_expired_exit:
void sta_rx_agg_session_timer_expired(unsigned long data)
{
/* not an elegant detour, but there is no choice as the timer passes
- * only one argument, and verious sta_info are needed here, so init
+ * only one argument, and various sta_info are needed here, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
u8 *ptid = (u8 *)data;
@@ -2479,8 +2479,6 @@ static int ieee80211_sta_join_ibss(struct net_device *dev,
ifsta->state = IEEE80211_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
- ieee80211_rx_bss_put(dev, bss);
-
return res;
}
@@ -3523,6 +3521,7 @@ static int ieee80211_sta_create_ibss(struct net_device *dev,
struct ieee80211_supported_band *sband;
u8 bssid[ETH_ALEN], *pos;
int i;
+ int ret;
DECLARE_MAC_BUF(mac);
#if 0
@@ -3567,7 +3566,9 @@ static int ieee80211_sta_create_ibss(struct net_device *dev,
*pos++ = (u8) (rate / 5);
}
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
@@ -3615,10 +3616,13 @@ static int ieee80211_sta_find_ibss(struct net_device *dev,
(bss = ieee80211_rx_bss_get(dev, bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len))) {
+ int ret;
printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
" based on configured SSID\n",
dev->name, print_mac(mac, bssid));
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " did not try to join ibss\n");
@@ -4095,18 +4099,17 @@ ieee80211_sta_scan_result(struct net_device *dev,
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = bss->freq;
- iwe.u.freq.e = 6;
+ iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
+ iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
- iwe.u.freq.e = 0;
+ iwe.u.freq.m = bss->freq;
+ iwe.u.freq.e = 6;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
-
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.qual = bss->signal;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 1958bfb..0941e5d 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1091,7 +1091,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
u16 fc, hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
- u8 src[ETH_ALEN];
+ u8 src[ETH_ALEN] __aligned(2);
struct sk_buff *skb = rx->skb;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
DECLARE_MAC_BUF(mac);
@@ -1234,7 +1234,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
*/
static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx)
{
- static const u8 pae_group_addr[ETH_ALEN]
+ static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 131e9e6..4e97b26 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -34,11 +34,11 @@ void *mac80211_wiphy_privid = &mac80211_wiphy_privid;
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-const unsigned char rfc1042_header[] =
+const unsigned char rfc1042_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-const unsigned char bridge_tunnel_header[] =
+const unsigned char bridge_tunnel_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 457ebf9..8311bb2 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -489,9 +489,14 @@ static int ieee80211_ioctl_giwap(struct net_device *dev,
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
- return 0;
+ if (sdata->u.sta.state == IEEE80211_ASSOCIATED) {
+ ap_addr->sa_family = ARPHRD_ETHER;
+ memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
+ return 0;
+ } else {
+ memset(&ap_addr->sa_data, 0, ETH_ALEN);
+ return 0;
+ }
} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
--
John W. Linville
linville@...driver.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists