[ 0.000000] Linux version 2.6.26-rc4 (root@energy) (gcc version 4.2.4 (Gentoo 4.2.4 p1.0)) #1 SMP Thu May 29 04:02:44 CEST 2008 [ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=0ÿÿ¿ [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] max_pfn_mapped = 1245184 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98F0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 4000809 MSFT 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19201 201 INTL 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 4000809 MSFT 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 4000809 MSFT 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 4000809 MSFT 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 4000809 MSFT 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-59fa33] TEXT DATA BSS [ 0.000000] early res: 3 [9fc00-fffff] BIOS reserved [ 0.000000] early res: 4 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20002e00000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000d5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1032 pages reserved [ 0.000000] DMA zone: 2911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000 [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 33264 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2 [14315324.233334] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030343 [14315324.233334] Kernel command line: root=/dev/sda3 nmi_watchdog=0ÿÿ¿ [14315324.233334] Initializing CPU#0 [14315324.233334] PID hash table entries: 4096 (order: 12, 32768 bytes) [14315324.233334] TSC calibrated against PM_TIMER [14315324.233334] Marking TSC unstable due to TSCs unsynchronized [14315324.233334] time.c: Detected 3013.886 MHz processor. [14315324.233334] spurious 8259A interrupt: IRQ7. [14315324.233334] Console: colour VGA+ 80x25 [14315324.233334] console [tty0] enabled [14315324.233334] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [14315324.233334] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [14315324.233334] Checking aperture... [14315324.233334] Node 0: aperture @ ecca000000 size 32 MB [14315324.233334] Aperture beyond 4GB. Ignoring. [14315324.233334] No AGP bridge found [14315324.233334] Your BIOS doesn't leave a aperture memory hole [14315324.233334] Please enable the IOMMU option in the BIOS setup [14315324.233334] This costs you 64 MB of RAM [14315324.233334] Mapping aperture over 65536 KB of RAM @ 4000000 [14315324.233334] PM: Registered nosave memory: 0000000004000000 - 0000000008000000 [14315324.233334] Memory: 4047800k/4980736k available (2232k kernel code, 145356k reserved, 912k data, 204k init) [14315324.233334] CPA: page pool initialized 1 of 1 pages preallocated [14315324.233334] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [14315324.233334] hpet clockevent registered [14315324.316485] Calibrating delay using timer specific routine.. 6034.80 BogoMIPS (lpj=10054083) [14315324.316576] Mount-cache hash table entries: 256 [14315324.316662] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [14315324.316662] CPU: L2 Cache: 1024K (64 bytes/line) [14315324.316662] CPU: Physical Processor ID: 0 [14315324.316662] CPU: Processor Core ID: 0 [14315324.316662] ACPI: Core revision 20080321 [14315324.353326] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [14315324.353426] Using local APIC timer interrupts. [14315324.359992] APIC timer calibration result 12557862 [14315324.359992] Detected 12.557 MHz APIC timer. [14315324.360104] Booting processor 1/1 ip 6000 [14315324.360104] Initializing CPU#1 [14315324.360104] Calibrating delay using timer specific routine.. 6030.97 BogoMIPS (lpj=10046354) [14315324.360104] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [14315324.360104] CPU: L2 Cache: 1024K (64 bytes/line) [14315324.360104] CPU: Physical Processor ID: 0 [14315324.360104] CPU: Processor Core ID: 1 [14315324.360104] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [14315324.453718] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [14315324.454105] Brought up 2 CPUs [14315324.454142] Total of 2 processors activated (12065.77 BogoMIPS). [14315324.456653] net_namespace: 360 bytes [14315324.456653] NET: Registered protocol family 16 [14315324.456653] No dock devices found. [14315324.456653] node 0 link 0: io port [1000, ffffff] [14315324.456653] node 0 link 0: io port [2000, 2fff] [14315324.456653] TOM: 00000000d0000000 aka 3328M [14315324.456653] node 0 link 0: mmio [e0000000, efffffff] [14315324.456653] node 0 link 0: mmio [a0000, bffff] [14315324.456653] node 0 link 0: mmio [d0000000, fe0bffff] [14315324.456653] TOM2: 0000000130000000 aka 4864M [14315324.456653] bus: [00,07] on node 0 link 0 [14315324.456653] bus: 00 index 0 io port: [0, ffff] [14315324.456653] bus: 00 index 1 mmio: [d0000000, ffffffff] [14315324.456653] bus: 00 index 2 mmio: [a0000, bffff] [14315324.456653] bus: 00 index 3 mmio: [130000000, fcffffffff] [14315324.456653] ACPI: bus type pci registered [14315324.456653] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [14315324.456653] PCI: Not using MMCONFIG. [14315324.456653] PCI: Using configuration type 1 for base access [14315324.456653] ACPI: EC: Look up EC in DSDT [14315324.463319] ACPI: Interpreter enabled [14315324.463319] ACPI: (supports S0 S1 S3 S4 S5) [14315324.463319] ACPI: Using IOAPIC for interrupt routing [14315324.463319] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [14315324.467063] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [14315324.475560] PCI: Using MMCONFIG at e0000000 - efffffff [14315324.483318] ACPI: PCI Root Bridge [PCI0] (0000:00) [14315324.483318] PCI: Transparent bridge - 0000:00:08.0 [14315324.483318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [14315324.483318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [14315324.483318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [14315324.483394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [14315324.483469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [14315324.483543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [14315324.489984] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [14315324.489984] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [14315324.489984] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [14315324.489984] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [14315324.489984] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [14315324.490383] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [14315324.490746] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [14315324.491144] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [14315324.491507] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [14315324.491871] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [14315324.492268] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [14315324.492632] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [14315324.493034] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [14315324.493317] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [14315324.493683] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [14315324.494079] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [14315324.494443] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [14315324.494868] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [14315324.495265] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [14315324.495662] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [14315324.496621] Linux Plug and Play Support v0.97 (c) Adam Belay [14315324.496650] pnp: PnP ACPI init [14315324.496650] ACPI: bus type pnp registered [14315324.499983] pnp: PnP ACPI: found 13 devices [14315324.503316] ACPI: ACPI bus type pnp unregistered [14315324.503316] SCSI subsystem initialized [14315324.503316] libata version 3.00 loaded. [14315324.503316] usbcore: registered new interface driver usbfs [14315324.503316] usbcore: registered new interface driver hub [14315324.506649] usbcore: registered new device driver usb [14315324.506649] PCI: Using ACPI for IRQ routing [14315324.523315] PCI-DMA: Disabling AGP. [14315324.523315] PCI-DMA: aperture base @ 4000000 size 65536 KB [14315324.523315] PCI-DMA: using GART IOMMU. [14315324.523315] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [14315324.523315] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [14315324.523315] hpet0: 3 32-bit timers, 25000000 Hz [14315324.524232] Switched to high resolution mode on CPU 0 [14315324.524232] Switched to high resolution mode on CPU 1 [14315324.527599] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [14315324.527640] system 00:05: ioport range 0x800-0x80f has been reserved [14315324.527680] system 00:05: ioport range 0x2000-0x207f has been reserved [14315324.527720] system 00:05: ioport range 0x2080-0x20ff has been reserved [14315324.527760] system 00:05: ioport range 0x2400-0x247f has been reserved [14315324.527800] system 00:05: ioport range 0x2480-0x24ff has been reserved [14315324.527840] system 00:05: ioport range 0x2800-0x287f has been reserved [14315324.527880] system 00:05: ioport range 0x2880-0x28ff has been reserved [14315324.527920] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [14315324.527960] system 00:05: ioport range 0x2c80-0x2cff has been reserved [14315324.528001] system 00:05: iomem range 0x0-0xffffffffffffffff could not be reserved [14315324.528050] system 00:05: iomem range 0xfee01000-0xfeefffff could not be reserved [14315324.528103] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [14315324.528152] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved [14315324.528205] system 00:0a: ioport range 0x290-0x29f has been reserved [14315324.528249] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [14315324.528301] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [14315324.528341] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [14315324.528381] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [14315324.528430] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [14315324.528478] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved [14315324.530006] PCI: Bridge: 0000:00:08.0 [14315324.530006] IO window: d000-dfff [14315324.530006] MEM window: 0xf9f00000-0xf9ffffff [14315324.530006] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff [14315324.530006] PCI: Bridge: 0000:00:0b.0 [14315324.530006] IO window: c000-cfff [14315324.530006] MEM window: 0xf9e00000-0xf9efffff [14315324.530006] PREFETCH window: disabled. [14315324.530006] PCI: Bridge: 0000:00:0c.0 [14315324.530006] IO window: disabled. [14315324.530006] MEM window: disabled. [14315324.530006] PREFETCH window: disabled. [14315324.530006] PCI: Bridge: 0000:00:0d.0 [14315324.530006] IO window: e000-efff [14315324.530006] MEM window: 0xfa000000-0xfebfffff [14315324.530006] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [14315324.530006] PCI: Bridge: 0000:00:0e.0 [14315324.530006] IO window: disabled. [14315324.530006] MEM window: disabled. [14315324.530006] PREFETCH window: disabled. [14315324.530006] PCI: Setting latency timer of device 0000:00:08.0 to 64 [14315324.530006] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [14315324.530006] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [14315324.530006] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [14315324.530006] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [14315324.530006] NET: Registered protocol family 2 [14315324.557696] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [14315324.558289] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [14315324.559973] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [14315324.560006] TCP: Hash tables configured (established 262144 bind 65536) [14315324.560006] TCP reno registered [14315324.567096] NET: Registered protocol family 1 [14315324.570006] Loading Reiser4. See www.namesys.com for a description of Reiser4. [14315324.570006] msgmni has been set to 7906 for ipc namespace ffffffff804f9180 [14315324.570006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [14315324.570006] io scheduler noop registered [14315324.570006] io scheduler cfq registered (default) [14315324.570006] pci 0000:00:00.0: Enabling HT MSI Mapping [14315324.570006] pci 0000:00:08.0: Enabling HT MSI Mapping [14315324.570006] pci 0000:00:0a.0: Enabling HT MSI Mapping [14315324.570006] pci 0000:00:0b.0: Enabling HT MSI Mapping [14315324.570006] pci 0000:00:0c.0: Enabling HT MSI Mapping [14315324.570006] pci 0000:00:0d.0: Enabling HT MSI Mapping [14315324.570006] pci 0000:00:0e.0: Enabling HT MSI Mapping [14315324.570006] pci 0000:04:00.0: Boot video device [14315324.570006] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [14315324.570006] assign_interrupt_mode Found MSI capability [14315324.570006] Allocate Port Service[0000:00:0b.0:pcie00] [14315324.570006] Allocate Port Service[0000:00:0b.0:pcie03] [14315324.570006] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [14315324.570006] assign_interrupt_mode Found MSI capability [14315324.570006] Allocate Port Service[0000:00:0c.0:pcie00] [14315324.570006] Allocate Port Service[0000:00:0c.0:pcie03] [14315324.570006] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [14315324.570006] assign_interrupt_mode Found MSI capability [14315324.570006] Allocate Port Service[0000:00:0d.0:pcie00] [14315324.570006] Allocate Port Service[0000:00:0d.0:pcie03] [14315324.570006] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [14315324.570006] assign_interrupt_mode Found MSI capability [14315324.570006] Allocate Port Service[0000:00:0e.0:pcie00] [14315324.570006] Allocate Port Service[0000:00:0e.0:pcie03] [14315324.570006] input: Power Button (FF) as /class/input/input0 [14315324.570006] ACPI: Power Button (FF) [PWRF] [14315324.570006] input: Power Button (CM) as /class/input/input1 [14315324.570006] ACPI: Power Button (CM) [PWRB] [14315324.573340] ACPI: ACPI0007:00 is registered as cooling_device0 [14315324.573340] ACPI: ACPI0007:01 is registered as cooling_device1 [14315324.606671] Real Time Clock Driver v1.12ac [14315324.606671] hpet_resources: 0xfed00000 is busy [14315324.606671] Linux agpgart interface v0.103 [14315324.606671] Driver 'sd' needs updating - please use bus_type methods [14315324.606671] ahci 0000:00:0a.0: version 3.0 [14315324.606671] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [14315324.606671] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [14315325.606686] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [14315325.606735] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [14315325.606775] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [14315325.610007] scsi0 : ahci [14315325.610007] scsi1 : ahci [14315325.610007] scsi2 : ahci [14315325.610007] scsi3 : ahci [14315325.610007] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315 [14315325.610007] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315 [14315325.610007] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315 [14315325.610007] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315 [14315325.927280] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [14315325.933553] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [14315325.933553] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [14315325.937271] ata1.00: configured for UDMA/133 [14315326.258066] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [14315326.278501] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [14315326.278501] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [14315326.278501] ata2.00: configured for UDMA/133 [14315326.597278] ata3: SATA link down (SStatus 0 SControl 300) [14315326.917278] ata4: SATA link down (SStatus 0 SControl 300) [14315326.917278] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [14315326.917278] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [14315326.917278] sd 0:0:0:0: [sda] Write Protect is off [14315326.917278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [14315326.917278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [14315326.917278] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [14315326.917278] sd 0:0:0:0: [sda] Write Protect is off [14315326.917278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [14315326.917278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [14315326.917278] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [14315326.941437] sd 0:0:0:0: [sda] Attached SCSI disk [14315326.941437] sd 0:0:0:0: Attached scsi generic sg0 type 0 [14315326.941437] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [14315326.941437] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [14315326.941437] sd 1:0:0:0: [sdb] Write Protect is off [14315326.941437] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [14315326.941437] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [14315326.948122] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [14315326.948177] sd 1:0:0:0: [sdb] Write Protect is off [14315326.948215] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [14315326.948232] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [14315326.948282] sdb: sdb1 sdb2 [14315327.009488] sd 1:0:0:0: [sdb] Attached SCSI disk [14315327.009488] sd 1:0:0:0: Attached scsi generic sg1 type 0 [14315327.009488] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [14315327.012918] serio: i8042 KBD port at 0x60,0x64 irq 1 [14315327.012959] serio: i8042 AUX port at 0x60,0x64 irq 12 [14315327.041436] cpuidle: using governor ladder [14315327.041436] cpuidle: using governor menu [14315327.041436] usbcore: registered new interface driver usbhid [14315327.041436] usbhid: v2.6:USB HID core driver [14315327.041436] TCP cubic registered [14315327.041436] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [14315327.041436] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [14315327.041436] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [14315327.041436] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [14315327.041436] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [14315327.041436] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [14315327.041436] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [14315327.041436] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [14315327.041436] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [14315327.061436] input: AT Translated Set 2 keyboard as /class/input/input2 [14315327.158140] reiser4: sda3: found disk format 4.0.0. [14315328.731442] Clocksource tsc unstable (delta = -108742736 ns) [14315332.661436] VFS: Mounted root (reiser4 filesystem) readonly. [14315332.661436] Freeing unused kernel memory: 204k freed [14315335.108134] Mem-info: [14315335.108137] DMA per-cpu: [14315335.108138] CPU 0: hi: 0, btch: 1 usd: 0 [14315335.108140] CPU 1: hi: 0, btch: 1 usd: 0 [14315335.108141] DMA32 per-cpu: [14315335.108143] CPU 0: hi: 186, btch: 31 usd: 110 [14315335.108144] CPU 1: hi: 186, btch: 31 usd: 0 [14315335.108145] Normal per-cpu: [14315335.108147] CPU 0: hi: 186, btch: 31 usd: 82 [14315335.108148] CPU 1: hi: 186, btch: 31 usd: 86 [14315335.108151] Active:2710 inactive:2495 dirty:0 writeback:0 unstable:0 [14315335.108152] free:1002309 slab:1475 mapped:352 pagetables:443 bounce:0 [14315335.108154] DMA free:12420kB min:20kB low:24kB high:28kB active:0kB inactive:0kB present:11644kB pages_scanned:0 all_unreclaimable? no [14315335.108156] lowmem_reserve[]: 0 3255 4013 4013 [14315335.108160] DMA32 free:3249152kB min:6568kB low:8208kB high:9852kB active:0kB inactive:0kB present:3334048kB pages_scanned:0 all_unreclaimable? no [14315335.108162] lowmem_reserve[]: 0 0 757 757 [14315335.108165] Normal free:747664kB min:1528kB low:1908kB high:2292kB active:10840kB inactive:9980kB present:775680kB pages_scanned:0 all_unreclaimable? no [14315335.108167] lowmem_reserve[]: 0 0 0 0 [14315335.108169] DMA: 3*4kB 3*8kB 2*16kB 2*32kB 4*64kB 2*128kB 2*256kB 0*512kB 1*1024kB 1*2048kB 2*4096kB = 12420kB [14315335.108175] DMA32: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 2*256kB 3*512kB 1*1024kB 1*2048kB 792*4096kB = 3249152kB [14315335.108180] Normal: 1*4kB 4*8kB 3*16kB 3*32kB 1*64kB 1*128kB 1*256kB 3*512kB 2*1024kB 1*2048kB 181*4096kB = 747636kB [14315335.108186] 3403 total pagecache pages [14315335.108187] Swap cache: add 0, delete 0, find 0/0 [14315335.108188] Free swap = 0kB [14315335.108189] Total swap = 0kB [14315335.111437] 1245184 pages of RAM [14315335.111437] 233073 reserved pages [14315335.111437] 6494 pages shared [14315335.111437] 0 pages swap cached [14315335.478135] r8169 Gigabit Ethernet driver 2.2LK loaded [14315335.478388] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [14315335.478393] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19 [14315335.478401] PCI: Setting latency timer of device 0000:01:00.0 to 64 [14315335.478475] eth0: RTL8168b/8111b at 0xffffc2000005c000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314 [14315335.518375] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [14315335.518375] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [14315335.518375] PCI: Setting latency timer of device 0000:00:02.1 to 64 [14315335.518375] ehci_hcd 0000:00:02.1: EHCI Host Controller [14315335.518375] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [14315335.518375] ehci_hcd 0000:00:02.1: debug port 1 [14315335.518375] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [14315335.518375] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [14315335.528202] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [14315335.528285] usb usb1: configuration #1 chosen from 1 choice [14315335.528307] hub 1-0:1.0: USB hub found [14315335.528313] hub 1-0:1.0: 10 ports detected [14315335.861439] usb 1-4: new high speed USB device using ehci_hcd and address 2 [14315335.964771] reiser4: sdb2: found disk format 4.0.0. [14315335.988104] usb 1-4: configuration #1 chosen from 1 choice [14315335.988304] hub 1-4:1.0: USB hub found [14315335.988392] hub 1-4:1.0: 4 ports detected [14315336.278195] usb 1-4.1: new low speed USB device using ehci_hcd and address 3 [14315336.367560] usb 1-4.1: configuration #1 chosen from 1 choice [14315336.381887] input: Logitech USB Receiver as /class/input/input3 [14315336.404799] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-4.1 [14315336.414999] input: Logitech USB Receiver as /class/input/input4 [14315336.458131] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-4.1 [14315336.479020] mice: PS/2 mouse device common for all mice [14315336.647391] usb 1-4.2: new high speed USB device using ehci_hcd and address 4 [14315336.731414] usb 1-4.2: configuration #1 chosen from 1 choice [14315336.768104] Initializing USB Mass Storage driver... [14315336.770594] scsi4 : SCSI emulation for USB Mass Storage devices [14315336.771438] usb-storage: device found at 4 [14315336.771438] usb-storage: waiting for device to settle before scanning [14315336.771440] usbcore: registered new interface driver usb-storage [14315336.771440] USB Mass Storage support registered. [14315341.768103] scsi 4:0:0:0: Direct-Access Generic IC1210 CF 1.9C PQ: 0 ANSI: 0 CCS [14315341.774771] sd 4:0:0:0: [sdc] Attached SCSI removable disk [14315341.774771] sd 4:0:0:0: Attached scsi generic sg2 type 0 [14315341.778105] scsi 4:0:0:1: Direct-Access Generic IC1210 MS 1.9C PQ: 0 ANSI: 0 CCS [14315341.788927] sd 4:0:0:1: [sdd] Attached SCSI removable disk [14315341.791436] sd 4:0:0:1: Attached scsi generic sg3 type 0 [14315341.968103] scsi 4:0:0:2: Direct-Access Generic IC1210 MMC/SD 1.9C PQ: 0 ANSI: 0 CCS [14315341.986615] sd 4:0:0:2: [sde] 122624 512-byte hardware sectors (63 MB) [14315341.988689] sd 4:0:0:2: [sde] Write Protect is off [14315341.988692] sd 4:0:0:2: [sde] Mode Sense: 4b 00 00 08 [14315341.988693] sd 4:0:0:2: [sde] Assuming drive cache: write through [14315341.998729] sd 4:0:0:2: [sde] 122624 512-byte hardware sectors (63 MB) [14315342.001911] sd 4:0:0:2: [sde] Write Protect is off [14315342.001913] sd 4:0:0:2: [sde] Mode Sense: 4b 00 00 08 [14315342.001914] sd 4:0:0:2: [sde] Assuming drive cache: write through [14315342.001916] sde: sde1 [14315342.005017] sd 4:0:0:2: [sde] Attached SCSI removable disk [14315342.005044] sd 4:0:0:2: Attached scsi generic sg4 type 0 [14315342.011484] scsi 4:0:0:3: Direct-Access Generic IC1210 SM 1.9C PQ: 0 ANSI: 0 CCS [14315342.024769] sd 4:0:0:3: [sdf] Attached SCSI removable disk [14315342.024769] sd 4:0:0:3: Attached scsi generic sg5 type 0 [14315342.024769] usb-storage: device scan complete [14315361.064828] reiser4: sda5: found disk format 4.0.0. [14315363.724769] reiser4: sdb1: found disk format 4.0.0. [14315364.821826] Adding 4000176k swap on /dev/sda2. Priority:-1 extents:1 across:4000176k [14315365.571434] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [14315365.571434] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 [14315365.572531] Audigy2 value: Special config. [14315365.598378] r8169: eth0: link up [14315365.598378] r8169: eth0: link up [14315366.613262] i2c /dev entries driver [14315366.688376] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [14315366.688376] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [14315367.078375] w83627ehf: Found W83627EHG chip at 0x290