PAT disabled. Not yet verified on this CPU type. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI data) BIOS-e820: 00000000bfedf000 - 00000000bff00000 (ACPI NVS) BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 2174MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at [c00f6810] 000f6810 Entering add_active_range(0, 0, 786128) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 786128 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 786128 On node 0 totalpages: 786128 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 4350 pages used for memmap HighMem zone: 552402 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F67E0, 0024 (r2 LENOVO) ACPI: XSDT BFED14A0, 0084 (r1 LENOVO TP-79 2210 LTP 0) ACPI: FACP BFED1600, 00F4 (r3 LENOVO TP-79 2210 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080321] ACPI: DSDT BFED195E, D467 (r1 LENOVO TP-79 2210 MSFT 100000E) ACPI: FACS BFEF4000, 0040 ACPI: SSDT BFED17B4, 01AA (r1 LENOVO TP-79 2210 MSFT 100000E) ACPI: ECDT BFEDEDC5, 0052 (r1 LENOVO TP-79 2210 LNVO 1) ACPI: TCPA BFEDEE17, 0032 (r2 LENOVO TP-79 2210 LNVO 1) ACPI: APIC BFEDEE49, 0068 (r1 LENOVO TP-79 2210 LNVO 1) ACPI: MCFG BFEDEEB1, 003C (r1 LENOVO TP-79 2210 LNVO 1) ACPI: HPET BFEDEEED, 0038 (r1 LENOVO TP-79 2210 LNVO 1) ACPI: BOOT BFEDEFD8, 0028 (r1 LENOVO TP-79 2210 LTP 1) ACPI: SSDT BFEF2655, 025F (r1 LENOVO TP-79 2210 INTL 20050513) ACPI: SSDT BFEF28B4, 00A6 (r1 LENOVO TP-79 2210 INTL 20050513) ACPI: SSDT BFEF295A, 04F7 (r1 LENOVO TP-79 2210 INTL 20050513) ACPI: SSDT BFEF2E51, 01D8 (r1 LENOVO TP-79 2210 INTL 20050513) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1 already used, trying 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 41896 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 2 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779986 Kernel command line: root=/dev/mapper/sda3_crypt ro mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c059e000 soft=c0596000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Detected 1828.807 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3097948k/3144512k available (3129k kernel code, 45296k reserved, 1243k data, 288k init, 2227008k highmem) virtual kernel memory layout: fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc054b000 - 0xc0593000 ( 288 kB) .data : 0xc040e5f2 - 0xc0545288 (1243 kB) .text : 0xc0100000 - 0xc040e5f2 (3129 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3662.60 BogoMIPS (lpj=6101771) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080321 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU 1 irqstacks, hard=c059f000 soft=c0597000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3658.92 BogoMIPS (lpj=6095879) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 521334 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to: check_tsc_sync_source failed. Brought up 2 CPUs Total of 2 processors activated (7321.53 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 net_namespace: 652 bytes Booting paravirtualized kernel on bare hardware Time: 21:11:57 Date: 05/29/08 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) ACPI: WMI: Mapper loaded Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff could not be reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xd4000-0xd3fff could not be reserved system 00:00: iomem range 0xd8000-0xd7fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff has been reserved system 00:00: iomem range 0xe0000-0xe3fff has been reserved system 00:00: iomem range 0xe4000-0xe7fff has been reserved system 00:00: iomem range 0xe8000-0xebfff has been reserved system 00:00: iomem range 0xec000-0xeffff has been reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xbfffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: 0xee100000-0xee1fffff PREFETCH window: 0x00000000d8000000-0x00000000dfffffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: 0xee000000-0xee0fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 4000-5fff MEM window: 0xec000000-0xedffffff PREFETCH window: 0x00000000e4000000-0x00000000e40fffff PCI: Bridge: 0000:00:1c.2 IO window: 6000-7fff MEM window: 0xe8000000-0xe9ffffff PREFETCH window: 0x00000000e4100000-0x00000000e41fffff PCI: Bridge: 0000:00:1c.3 IO window: 8000-9fff MEM window: 0xea000000-0xebffffff PREFETCH window: 0x00000000e4200000-0x00000000e42fffff PCI: Bus 22, cardbus bridge: 0000:15:00.0 IO window: 0x0000a000-0x0000a0ff IO window: 0x0000a400-0x0000a4ff PREFETCH window: 0xe0000000-0xe3ffffff MEM window: 0xc4000000-0xc7ffffff PCI: Bridge: 0000:00:1e.0 IO window: a000-dfff MEM window: 0xe4300000-0xe7ffffff PREFETCH window: 0x00000000e0000000-0x00000000e3ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1c.3 to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 14504k freed Simple Boot Flag at 0x35 set to 0x1 IA-32 Microcode Update Driver: v1.14a audit: initializing netlink socket (disabled) type=2000 audit(1212095517.763:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 1731 for ipc namespace c0520760 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT BFEF1D36, 0240 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT BFEF1FFB, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BFEF1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT BFEF1F76, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM0] (64 C) ACPI: LNXTHERM:02 is registered as thermal_zone1 ACPI: Thermal Zone [THM1] (64 C) hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 218 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ATA-8: Hitachi HTS722020K9SA00, DC4OC54P, max UDMA/133 ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72202 DC4O PQ: 0 ANSI: 5 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 ata5.00: ATAPI: MATSHITADVD-RAM UJ-842 z, RC01, max UDMA/33 ata5.00: configured for UDMA/33 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 z RC01 PQ: 0 ANSI: 5 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 8:19:198 hash matches device ttypd BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. Freeing unused kernel memory: 288k freed Write protecting the kernel text: 3132k Write protecting the kernel read-only data: 1048k input: AT Translated Set 2 keyboard as /class/input/input3 fuse init (API version 7.9) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 4:0:0:0: Attached scsi generic sg1 type 5 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26-rc4 uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26-rc4 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26-rc4 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26-rc4 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 Clocksource tsc unstable (delta = -120506611 ns) ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.26-rc4 ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 hub 5-0:1.0: unable to enumerate USB device on port 8 usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usb 4-2: New USB device found, idVendor=0483, idProduct=2016 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Biometric Coprocessor usb 4-2: Manufacturer: STMicroelectronics padlock: VIA PadLock Hash Engine not detected. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Non-volatile memory driver v1.2 Linux agpgart interface v0.103 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: device:03 is registered as cooling_device2 input: Video Bus as /class/input/input4 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: device:08 is registered as cooling_device3 input: Video Bus as /class/input/input5 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:02:00.0: Disabling L1 ASPM ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 thinkpad_acpi: ThinkPad ACPI Extras v0.20 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 79ETE1WW (2.21 ), EC 79HT50WW-1.07 thinkpad_acpi: Lenovo ThinkPad T60, model 2007F4G thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:28:77:ad eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 2, PHY: 2, PBA No: 005301-003 thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode thinkpad_acpi: standard ACPI backlight interface available, not loading native one... input: ThinkPad Extra Buttons as /class/input/input6 irda_init() NET: Registered protocol family 23 iTCO_vendor_support: vendor-support=0 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input7 nsc-ircc 00:0a: activated nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x164e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Found dongle: No dongle connected nsc_ircc_init_dongle_interface(), No dongle connected iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 Yenta: ISA IRQ mask 0x0cf0, PCI irq 16 Socket status: 30000007 pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff intel_rng: FWH not detected warning: `ntpd' uses 32-bit capabilities (legacy support in use) iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' ACPI: PCI interrupt for device 0000:03:00.0 disabled input: PC Speaker as /class/input/input8 ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:2010 PCI: Setting latency timer of device 0000:00:1b.0 to 64 EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input9