Currently the per cpu subsystem is not able to use the atomic capabilities that are provided by many of the available processors. This patch adds new functionality that allows the optimizing of per cpu variable handling. In particular it provides a simple way to exploit atomic operations in order to avoid having to disable interrupts or performing address calculation to access per cpu data. F.e. Using our current methods we may do unsigned long flags; struct stat_struct *p; local_irq_save(flags); /* Calculate address of per processor area */ p = CPU_PTR(stat, smp_processor_id()); p->counter++; local_irq_restore(flags); The segment can be replaced by a single atomic CPU operation: CPU_INC(stat->counter); Most processors have instructions to perform the increment using a a single atomic instruction. Processors may have segment registers, global registers or per cpu mappings of per cpu areas that can be used to generate atomic instructions that combine the following in a single operation: 1. Adding of an offset / register to a base address 2. Read modify write operation on the address calculated by the instruction. If 1+2 are combined in an instruction then the instruction is atomic vs interrupts. This means that percpu atomic operations do not need to disable interrupts to increments counters etc. The existing methods in use in the kernel cannot utilize the power of these atomic instructions. local_t is not really addressing the issue since the offset calculation performed before the atomic operation. The operation is therefor not atomic. Disabling interrupt or preemption is required in order to use local_t. local_t is also very specific to the x86 processor. The solution here can utilize other methods than just those provided by the x86 instruction set. On x86 the above CPU_INC translated into a single instruction: inc %%gs:(&stat->counter) This instruction is interrupt safe since it can either be completed or not. Both adding of the offset and the read modify write are combined in one instruction. The determination of the correct per cpu area for the current processor does not require access to smp_processor_id() (expensive...). The gs register is used to provide a processor specific offset to the respective per cpu area where the per cpu variable resides. Note that the counter offset into the struct was added *before* the segment selector was added. This is necessary to avoid calculations. In the past we first determine the address of the stats structure on the respective processor and then added the field offset. However, the offset may as well be added earlier. The adding of the per cpu offset (here through the gs register) must be done by the instruction used for atomic per cpu access. If "stat" was declared via DECLARE_PER_CPU then this patchset is capable of convincing the linker to provide the proper base address. In that case no calculations are necessary. Should the stat structure be reachable via a register then the address calculation capabilities can be leveraged to avoid calculations. On IA64 we can get the same combination of operations in a single instruction by using the virtual address that always maps to the local per cpu area: fetchadd &stat->counter + (VCPU_BASE - __per_cpu_start) The access is forced into the per cpu address reachable via the virtualized address. IA64 allows the embedding of an offset into the instruction. So the fetchadd can perform both the relocation of the pointer into the per cpu area as well as the atomic read modify write cycle. In order to be able to exploit the atomicity of these instructions we introduce a series of new functions that take either: 1. A per cpu pointer as returned by cpu_alloc() or CPU_ALLOC(). 2. A per cpu variable address as returned by per_cpu_var(). CPU_READ() CPU_WRITE() CPU_INC CPU_DEC CPU_ADD CPU_SUB CPU_XCHG CPU_CMPXCHG Signed-off-by: Christoph Lameter --- include/linux/percpu.h | 135 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) Index: linux-2.6/include/linux/percpu.h =================================================================== --- linux-2.6.orig/include/linux/percpu.h 2008-05-28 22:31:43.000000000 -0700 +++ linux-2.6/include/linux/percpu.h 2008-05-28 23:38:17.000000000 -0700 @@ -179,4 +179,139 @@ void *cpu_alloc(unsigned long size, gfp_t flags, unsigned long align); void cpu_free(void *cpu_pointer, unsigned long size); +/* + * Fast atomic per cpu operations. + * + * The following operations can be overridden by arches to implement fast + * and efficient operations. The operations are atomic meaning that the + * determination of the processor, the calculation of the address and the + * operation on the data is an atomic operation. + * + * The parameter passed to the atomic per cpu operations is an lvalue not a + * pointer to the object. + */ +#ifndef CONFIG_HAVE_CPU_OPS + +/* + * Fallback in case the arch does not provide for atomic per cpu operations. + * + * The first group of macros is used when it is safe to update the per + * cpu variable because preemption is off (per cpu variables that are not + * updated from interrupt context) or because interrupts are already off. + */ +#define __CPU_READ(var) \ +({ \ + (*THIS_CPU(&(var))); \ +}) + +#define __CPU_WRITE(var, value) \ +({ \ + *THIS_CPU(&(var)) = (value); \ +}) + +#define __CPU_ADD(var, value) \ +({ \ + *THIS_CPU(&(var)) += (value); \ +}) + +#define __CPU_INC(var) __CPU_ADD((var), 1) +#define __CPU_DEC(var) __CPU_ADD((var), -1) +#define __CPU_SUB(var, value) __CPU_ADD((var), -(value)) + +#define __CPU_CMPXCHG(var, old, new) \ +({ \ + typeof(obj) x; \ + typeof(obj) *p = THIS_CPU(&(obj)); \ + x = *p; \ + if (x == (old)) \ + *p = (new); \ + (x); \ +}) + +#define __CPU_XCHG(obj, new) \ +({ \ + typeof(obj) x; \ + typeof(obj) *p = THIS_CPU(&(obj)); \ + x = *p; \ + *p = (new); \ + (x); \ +}) + +/* + * Second group used for per cpu variables that are not updated from an + * interrupt context. In that case we can simply disable preemption which + * may be free if the kernel is compiled without support for preemption. + */ +#define _CPU_READ __CPU_READ +#define _CPU_WRITE __CPU_WRITE + +#define _CPU_ADD(var, value) \ +({ \ + preempt_disable(); \ + __CPU_ADD((var), (value)); \ + preempt_enable(); \ +}) + +#define _CPU_INC(var) _CPU_ADD((var), 1) +#define _CPU_DEC(var) _CPU_ADD((var), -1) +#define _CPU_SUB(var, value) _CPU_ADD((var), -(value)) + +#define _CPU_CMPXCHG(var, old, new) \ +({ \ + typeof(addr) x; \ + preempt_disable(); \ + x = __CPU_CMPXCHG((var), (old), (new)); \ + preempt_enable(); \ + (x); \ +}) + +#define _CPU_XCHG(var, new) \ +({ \ + typeof(var) x; \ + preempt_disable(); \ + x = __CPU_XCHG((var), (new)); \ + preempt_enable(); \ + (x); \ +}) + +/* + * Third group: Interrupt safe CPU functions + */ +#define CPU_READ __CPU_READ +#define CPU_WRITE __CPU_WRITE + +#define CPU_ADD(var, value) \ +({ \ + unsigned long flags; \ + local_irq_save(flags); \ + __CPU_ADD((var), (value)); \ + local_irq_restore(flags); \ +}) + +#define CPU_INC(var) CPU_ADD((var), 1) +#define CPU_DEC(var) CPU_ADD((var), -1) +#define CPU_SUB(var, value) CPU_ADD((var), -(value)) + +#define CPU_CMPXCHG(var, old, new) \ +({ \ + unsigned long flags; \ + typeof(var) x; \ + local_irq_save(flags); \ + x = __CPU_CMPXCHG((var), (old), (new)); \ + local_irq_restore(flags); \ + (x); \ +}) + +#define CPU_XCHG(var, new) \ +({ \ + unsigned long flags; \ + typeof(var) x; \ + local_irq_save(flags); \ + x = __CPU_XCHG((var), (new)); \ + local_irq_restore(flags); \ + (x); \ +}) + +#endif /* CONFIG_HAVE_CPU_OPS */ + #endif /* __LINUX_PERCPU_H */ -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/