| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1212467165-26379-1-git-send-email-cooloney@kernel.org>
Date: Tue, 3 Jun 2008 12:26:05 +0800
From: Bryan Wu <cooloney@...nel.org>
To: dbrownell@...rs.sourceforge.net
Cc: linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
Michael Hennerich <michael.hennerich@...log.com>,
David Brownell <david-b@...bell.net>,
Bryan Wu <cooloney@...nel.org>
Subject: [PATCH 1/1] MTD DataFlash: fix bug - ATMEL AT45DF321D spi flash card fails to be copied to (v2)
From: Michael Hennerich <michael.hennerich@...log.com>
- Add support for binary page size DataFlashes.
- The driver now prints out pagesize and erasesize.
Printout valuable information for creating flash filesystems.
Signed-off-by: Michael Hennerich <michael.hennerich@...log.com>
Cc: David Brownell <david-b@...bell.net>
Signed-off-by: Bryan Wu <cooloney@...nel.org>
---
drivers/mtd/devices/mtd_dataflash.c | 117 +++++++++++++++++++++++++++++++++--
1 files changed, 112 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index b35e481..acc3728 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -487,7 +487,9 @@ add_dataflash(struct spi_device *spi, char *name,
device->write = dataflash_write;
device->priv = priv;
- dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024);
+ dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
+ "erasesize %d bytes\n", name, device->size/1024,
+ pagesize, pagesize * 8); /* 8 pages = 1 block */
dev_set_drvdata(&spi->dev, priv);
if (mtd_has_partitions()) {
@@ -521,7 +523,7 @@ add_dataflash(struct spi_device *spi, char *name,
*
* Device Density ID code #Pages PageSize Offset
* AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
- * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9
* AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
* AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
* AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
@@ -529,9 +531,114 @@ add_dataflash(struct spi_device *spi, char *name,
* AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11
* AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
*/
+
+struct flash_info {
+ char *name;
+
+ /* JEDEC id zero means "no ID" (most older chips); otherwise it has
+ * a high byte of zero plus three data bytes: the manufacturer id,
+ * then a two byte device id.
+ */
+ u32 jedec_id;
+
+ /* The size listed here is what works with OPCODE_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned nr_pages;
+ u16 pagesize;
+ u16 pageoffset;
+
+ u16 flags;
+#define SUP_POW2PS 0x02
+#define IS_POW2PS 0x01
+};
+
+static struct flash_info __devinitdata dataflash_data [] = {
+
+ { "at45db011d", 0x1f2200, 512, 264, 9, SUP_POW2PS},
+ { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "at45db021d", 0x1f2300, 1024, 264, 9, SUP_POW2PS},
+ { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "at45db041d", 0x1f2400, 2048, 264, 9, SUP_POW2PS},
+ { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "at45db081d", 0x1f2500, 4096, 264, 9, SUP_POW2PS},
+ { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "at45db161d", 0x1f2600, 4096, 528, 10, SUP_POW2PS},
+ { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+ { "at45db321c", 0x1f2700, 8192, 528, 10, },
+
+ { "at45db321d", 0x1f2701, 8192, 528, 10, SUP_POW2PS},
+ { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+ { "at45db641d", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+ { "at45db641d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+};
+
+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+{
+ int tmp;
+ u8 code = OP_READ_ID;
+ u8 id[3];
+ u32 jedec;
+ struct flash_info *info;
+ int status;
+
+
+ /* JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ */
+ tmp = spi_write_then_read(spi, &code, 1, id, 3);
+ if (tmp < 0) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+ spi->dev.bus_id, tmp);
+ return NULL;
+ }
+ jedec = id[0];
+ jedec = jedec << 8;
+ jedec |= id[1];
+ jedec = jedec << 8;
+ jedec |= id[2];
+
+ for (tmp = 0, info = dataflash_data;
+ tmp < ARRAY_SIZE(dataflash_data);
+ tmp++, info++) {
+ if (info->jedec_id == jedec) {
+ if (info->flags & SUP_POW2PS) {
+ status = dataflash_status(spi);
+ if (status & 0x1)
+ /* return power of 2 pagesize */
+ return ++info;
+ else
+ return info;
+ }
+ }
+ }
+ return NULL;
+}
+
static int __devinit dataflash_probe(struct spi_device *spi)
{
int status;
+ struct flash_info *info;
+
+ /*
+ * Try to detect dataflash by JEDEC ID.
+ * If it succeeds we know we have either a C or D part.
+ * D will support power of 2 pagesize option.
+ */
+
+ info = jedec_probe(spi);
+
+ if (info != NULL)
+ return add_dataflash(spi, info->name, info->nr_pages,
+ info->pagesize, info->pageoffset);
+
status = dataflash_status(spi);
if (status <= 0 || status == 0xff) {
@@ -551,16 +658,16 @@ static int __devinit dataflash_probe(struct spi_device *spi)
status = add_dataflash(spi, "AT45DB011B", 512, 264, 9);
break;
case 0x14: /* 0 1 0 1 x x */
- status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9);
+ status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
break;
case 0x1c: /* 0 1 1 1 x x */
- status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
+ status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9);
break;
case 0x24: /* 1 0 0 1 x x */
status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
break;
case 0x2c: /* 1 0 1 1 x x */
- status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
+ status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10);
break;
case 0x34: /* 1 1 0 1 x x */
status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
--
1.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists