| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200806061441.59984.yhlu.kernel@gmail.com>
Date: Fri, 6 Jun 2008 14:41:59 -0700
From: Yinghai Lu <yhlu.kernel@...il.com>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Sam Ravnborg <sam@...nborg.org>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86: make generic arch support NUMAQ v3
so it could fallback to normal numa.
NUMAQ depends on GENERICARCH
also decouple genericarch numa with acpi.
also make it fallback to bigsmp if apicid > 8.
v3: return early if not found_numaq in pci_numa_init
remove xquad_portio in misc.c
Signed-off-by: Yinghai Lu <yhlu.kernel@...il.com>
Index: linux-2.6/arch/x86/Kconfig
===================================================================
--- linux-2.6.orig/arch/x86/Kconfig
+++ linux-2.6/arch/x86/Kconfig
@@ -264,17 +264,6 @@ config X86_VOYAGER
If you do not specifically know you have a Voyager based machine,
say N here, otherwise the kernel you build will not be bootable.
-config X86_NUMAQ
- bool "NUMAQ (IBM/Sequent)"
- depends on SMP && X86_32 && PCI
- select NUMA
- help
- This option is used for getting Linux to run on a (IBM/Sequent) NUMA
- multiquad box. This changes the way that processors are bootstrapped,
- and uses Clustered Logical APIC addressing mode instead of Flat Logical.
- You will need a new lynxer.elf file to flash your firmware with - send
- email to <Martin.Bligh@...ibm.com>.
-
config X86_SUMMIT
bool "Summit/EXA (IBM x440)"
depends on X86_32 && SMP
@@ -307,12 +296,12 @@ config X86_VISWS
and vice versa. See <file:Documentation/sgi-visws.txt> for details.
config X86_GENERICARCH
- bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+ bool "Generic architecture (NUMAQ, Summit, bigsmp, ES7000, default)"
depends on X86_32
help
- This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
- It is intended for a generic binary kernel.
- If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
+ This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+ subarchitectures. It is intended for a generic binary kernel.
+ You need enable NUMA, otherwise NUMAQ is skipped.
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
@@ -348,6 +337,17 @@ config X86_VSMP
endchoice
+config X86_NUMAQ
+ bool "NUMAQ (IBM/Sequent)"
+ depends on SMP && X86_32 && PCI && X86_GENERICARCH
+ select NUMA
+ help
+ This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+ NUMA multiquad box. This changes the way that processors are
+ bootstrapped, and uses Clustered Logical APIC addressing mode instead
+ of Flat Logical. You will need a new lynxer.elf file to flash your
+ firmware with - send email to <Martin.Bligh@...ibm.com>.
+
config SCHED_NO_NO_OMIT_FRAME_POINTER
def_bool y
prompt "Single-depth WCHAN output"
@@ -908,9 +908,9 @@ config X86_PAE
config NUMA
bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
- default y if (X86_NUMAQ || X86_SUMMIT)
+ default y if (X86_NUMAQ || X86_SUMMIT || X86_GENERICARCH)
help
Enable NUMA (Non Uniform Memory Access) support.
The kernel will try to allocate memory used by a CPU on the
Index: linux-2.6/arch/x86/kernel/io_apic_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/io_apic_32.c
+++ linux-2.6/arch/x86/kernel/io_apic_32.c
@@ -1715,7 +1715,6 @@ void disable_IO_APIC(void)
* by Matt Domsch <Matt_Domsch@...l.com> Tue Dec 21 12:25:05 CST 1999
*/
-#ifndef CONFIG_X86_NUMAQ
static void __init setup_ioapic_ids_from_mpc(void)
{
union IO_APIC_reg_00 reg_00;
@@ -1725,6 +1724,11 @@ static void __init setup_ioapic_ids_from
unsigned char old_id;
unsigned long flags;
+#ifdef CONFIG_X86_NUMAQ
+ if (found_numaq)
+ return;
+#endif
+
/*
* Don't check I/O APIC IDs for xAPIC systems. They have
* no meaning without the serial APIC bus.
@@ -1821,9 +1825,6 @@ static void __init setup_ioapic_ids_from
apic_printk(APIC_VERBOSE, " ok.\n");
}
}
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
int no_timer_check __initdata;
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -49,15 +49,73 @@ static int __init mpf_checksum(unsigned
}
#ifdef CONFIG_X86_NUMAQ
+int found_numaq;
/*
* Have to match translation table entries to main table entries by counter
* hence the mpc_record variable .... can't see a less disgusting way of
* doing this ....
*/
+struct mpc_config_translation {
+ unsigned char mpc_type;
+ unsigned char trans_len;
+ unsigned char trans_type;
+ unsigned char trans_quad;
+ unsigned char trans_global;
+ unsigned char trans_local;
+ unsigned short trans_reserved;
+};
+
static int mpc_record;
static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
__cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+ return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+
+static inline int mpc_apic_id(struct mpc_config_processor *m,
+ struct mpc_config_translation *translation_record)
+{
+ int quad = translation_record->trans_quad;
+ int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+ printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+ m->mpc_apicid,
+ (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+ m->mpc_apicver, quad, logical_apicid);
+ return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ mp_bus_id_to_node[m->mpc_busid] = quad;
+ mp_bus_id_to_local[m->mpc_busid] = local;
+ printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+ m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+static void mpc_oem_pci_bus(struct mpc_config_bus *m,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
#endif
static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
@@ -84,6 +142,9 @@ static void __cpuinit MP_processor_info(
printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
generic_processor_info(apicid, m->mpc_apicver);
+#ifdef CONFIG_X86_GENERICARCH
+ generic_bigsmp_probe();
+#endif
}
#ifdef CONFIG_X86_IO_APIC
@@ -321,11 +382,11 @@ static void __init smp_read_mpc_oem(stru
}
}
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
{
if (strncmp(oem, "IBM NUMA", 8))
- printk("Warning! May not be a NUMA-Q system!\n");
+ printk("Warning! Not a NUMA-Q system!\n");
else
found_numaq = 1;
@@ -388,7 +449,16 @@ static int __init smp_read_mpc(struct mp
return 0;
#ifdef CONFIG_X86_32
- mps_oem_check(mpc, oem, str);
+ /*
+ * need to make sure summit and es7000's mps_oem_check is safe to be
+ * called early via genericarch 's mps_oem_check
+ */
+ if (early) {
+#ifdef CONFIG_X86_NUMAQ
+ numaq_mps_oem_check(mpc, oem, str);
+#endif
+ } else
+ mps_oem_check(mpc, oem, str);
#endif
/* save the local APIC address, it might be non-default */
Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/numaq_32.c
+++ linux-2.6/arch/x86/kernel/numaq_32.c
@@ -36,8 +36,6 @@
#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
-int found_numaq;
-
/*
* Function: smp_dump_qct()
*
@@ -105,13 +103,3 @@ static int __init numaq_tsc_disable(void
}
arch_initcall(numaq_tsc_disable);
-#ifdef CONFIG_ACPI
-/*
- * Dummy implementation:
- */
-struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
-{
- return NULL;
-}
-#endif
Index: linux-2.6/arch/x86/mach-generic/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/Makefile
+++ linux-2.6/arch/x86/mach-generic/Makefile
@@ -2,7 +2,8 @@
# Makefile for the generic architecture
#
-EXTRA_CFLAGS := -Iarch/x86/kernel
+EXTRA_CFLAGS := -Iarch/x86/kernel
-obj-y := probe.o summit.o bigsmp.o es7000.o default.o
-obj-y += ../../x86/mach-es7000/
+obj-y := probe.o summit.o bigsmp.o es7000.o default.o
+obj-$(CONFIG_X86_NUMAQ) += numaq.o
+obj-y += ../../x86/mach-es7000/
Index: linux-2.6/arch/x86/mach-generic/probe.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/probe.c
+++ linux-2.6/arch/x86/mach-generic/probe.c
@@ -16,6 +16,7 @@
#include <asm/apicdef.h>
#include <asm/genapic.h>
+extern struct genapic apic_numaq;
extern struct genapic apic_summit;
extern struct genapic apic_bigsmp;
extern struct genapic apic_es7000;
@@ -24,6 +25,9 @@ extern struct genapic apic_default;
struct genapic *genapic = &apic_default;
static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+ &apic_numaq,
+#endif
&apic_summit,
&apic_bigsmp,
&apic_es7000,
@@ -88,7 +92,8 @@ void __init generic_apic_probe(void)
/* These functions can switch the APIC even after the initial ->probe() */
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
{
int i;
for (i = 0; apic_probe[i]; ++i) {
Index: linux-2.6/arch/x86/pci/Makefile_32
===================================================================
--- linux-2.6.orig/arch/x86/pci/Makefile_32
+++ linux-2.6/arch/x86/pci/Makefile_32
@@ -13,10 +13,11 @@ pci-y := fixup.o
pci-$(CONFIG_ACPI) += acpi.o
pci-y += legacy.o irq.o
-# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
+# Careful: VISWS overrule the pci-y above. The colons are
# therefor correct. This needs a proper fix by distangling the code.
pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
+
+pci-$(CONFIG_X86_NUMAQ) += numa.o
# Necessary for NUMAQ as well
pci-$(CONFIG_NUMA) += mp_bus_to_node.o
Index: linux-2.6/arch/x86/pci/numa.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/numa.c
+++ linux-2.6/arch/x86/pci/numa.c
@@ -6,45 +6,21 @@
#include <linux/init.h>
#include <linux/nodemask.h>
#include <mach_apic.h>
+#include <asm/mpspec.h>
#include "pci.h"
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
-int mp_bus_id_to_node[MAX_MP_BUSSES];
#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-int mp_bus_id_to_local[MAX_MP_BUSSES];
#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- mp_bus_id_to_node[m->mpc_busid] = quad;
- mp_bus_id_to_local[m->mpc_busid] = local;
- printk(KERN_INFO "Bus #%d is %s (node %d)\n",
- m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
EXPORT_SYMBOL(xquad_portio);
-#endif
#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
@@ -179,6 +155,9 @@ static int __init pci_numa_init(void)
{
int quad;
+ if (!found_numaq)
+ return 0;
+
raw_pci_ops = &pci_direct_conf1_mq;
if (pcibios_scanned++)
Index: linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-generic/mach_mpparse.h
+++ linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
@@ -1,7 +1,10 @@
#ifndef _MACH_MPPARSE_H
#define _MACH_MPPARSE_H 1
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid);
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
#endif
Index: linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-numaq/mach_apic.h
+++ linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
#define apicid_cluster(apicid) (apicid & 0xF0)
static inline int apic_id_registered(void)
@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(
return BAD_APICID;
}
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
- return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
static inline int apicid_to_node(int logical_apicid)
{
return logical_apicid >> 4;
@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cp
return physid_mask_of_physid(cpu + 4*node);
}
-struct mpc_config_translation {
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- int quad = translation_record->trans_quad;
- int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
- printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver, quad, logical_apicid);
- return logical_apicid;
-}
-
extern void *xquad_portio;
static inline void setup_portio_remap(void)
Index: linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-numaq/mach_mpparse.h
+++ linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
@@ -1,14 +1,7 @@
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
#endif /* __ASM_MACH_MPPARSE_H */
Index: linux-2.6/include/asm-x86/mmzone_32.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mmzone_32.h
+++ linux-2.6/include/asm-x86/mmzone_32.h
@@ -12,11 +12,9 @@
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
-#ifdef CONFIG_X86_NUMAQ
- #include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
- #include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
extern int get_memcfg_numa_flat(void);
/*
@@ -26,14 +24,11 @@ extern int get_memcfg_numa_flat(void);
*/
static inline void get_memcfg_numa(void)
{
-#ifdef CONFIG_X86_NUMAQ
+
if (get_memcfg_numaq())
return;
-#elif defined(CONFIG_ACPI_SRAT)
if (get_memcfg_from_srat())
return;
-#endif
-
get_memcfg_numa_flat();
}
@@ -42,7 +37,6 @@ extern int early_pfn_to_nid(unsigned lon
#else /* !CONFIG_NUMA */
#define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
#endif /* CONFIG_NUMA */
@@ -83,9 +77,6 @@ static inline int pfn_to_nid(unsigned lo
__pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
})
-#ifdef CONFIG_X86_NUMAQ /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn) ((pfn) < num_physpages)
-#else
static inline int pfn_valid(int pfn)
{
int nid = pfn_to_nid(pfn);
@@ -94,7 +85,6 @@ static inline int pfn_valid(int pfn)
return (pfn < node_end_pfn(nid));
return 0;
}
-#endif /* CONFIG_X86_NUMAQ */
#endif /* CONFIG_DISCONTIGMEM */
Index: linux-2.6/include/asm-x86/numaq.h
===================================================================
--- linux-2.6.orig/include/asm-x86/numaq.h
+++ linux-2.6/include/asm-x86/numaq.h
@@ -157,9 +157,10 @@ struct sys_cfg_data {
struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
};
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
{
- return NULL;
+ return 0;
}
#endif /* CONFIG_X86_NUMAQ */
#endif /* NUMAQ_H */
Index: linux-2.6/include/asm-x86/srat.h
===================================================================
--- linux-2.6.orig/include/asm-x86/srat.h
+++ linux-2.6/include/asm-x86/srat.h
@@ -27,11 +27,13 @@
#ifndef _ASM_SRAT_H_
#define _ASM_SRAT_H_
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+ return 0;
+}
+#endif
#endif /* _ASM_SRAT_H_ */
Index: linux-2.6/arch/x86/mach-generic/numaq.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/mach-generic/numaq.c
@@ -0,0 +1,41 @@
+/*
+ * APIC driver for the IBM NUMAQ chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/mach-numaq/mach_apic.h>
+#include <asm/mach-numaq/mach_apicdef.h>
+#include <asm/mach-numaq/mach_ipi.h>
+#include <asm/mach-numaq/mach_mpparse.h>
+#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq.h>
+
+static int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ numaq_mps_oem_check(mpc, oem, productid);
+ return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+ /* already know from get_memcfg_numaq() */
+ return found_numaq;
+}
+
+/* Hook from generic ACPI tables.c */
+static int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return 0;
+}
+
+struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);
Index: linux-2.6/arch/x86/kernel/apic_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic_32.c
+++ linux-2.6/arch/x86/kernel/apic_32.c
@@ -1528,7 +1528,7 @@ void __cpuinit generic_processor_info(in
* if (CPU_HOTPLUG_ENABLED || num_processors > 8)
* - Ashok Raj <ashok.raj@...el.com>
*/
- if (num_processors > 8) {
+ if (apicid > 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(version)) {
Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/bigsmp.c
+++ linux-2.6/arch/x86/mach-generic/bigsmp.c
@@ -48,7 +48,7 @@ static const struct dmi_system_id bigsmp
static int probe_bigsmp(void)
{
if (def_to_bigsmp)
- dmi_bigsmp = 1;
+ dmi_bigsmp = 1;
else
dmi_check_system(bigsmp_dmi_table);
return dmi_bigsmp;
Index: linux-2.6/drivers/acpi/Kconfig
===================================================================
--- linux-2.6.orig/drivers/acpi/Kconfig
+++ linux-2.6/drivers/acpi/Kconfig
@@ -4,7 +4,6 @@
menuconfig ACPI
bool "ACPI (Advanced Configuration and Power Interface) Support"
- depends on !X86_NUMAQ
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
Index: linux-2.6/include/asm-x86/mpspec.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mpspec.h
+++ linux-2.6/include/asm-x86/mpspec.h
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
extern u8 apicid_2_node[];
extern int pic_mode;
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
#define MAX_APICID 256
#else
Index: linux-2.6/arch/x86/kernel/summit_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/summit_32.c
+++ linux-2.6/arch/x86/kernel/summit_32.c
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_h
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
+#ifndef CONFIG_X86_NUMAQ
static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
{
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -217,10 +217,6 @@ static char *vidmem;
static int vidport;
static int lines, cols;
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
#include "../../../../lib/inflate.c"
static void *malloc(int size)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists