| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <386072610806070126n37cdd3c8w6c07cd091667e0e@mail.gmail.com>
Date: Sat, 7 Jun 2008 16:26:29 +0800
From: "Bryan Wu" <cooloney@...nel.org>
To: "Linus Torvalds" <torvalds@...ux-foundation.org>,
"Linux Kernel List" <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] Blackfin arch updates for 2.6.26-RC5
Hi Linus,
Please pull from 'for-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6.git for-linus
to receive the following updates:
arch/blackfin/kernel/traps.c | 8 ++---
arch/blackfin/mach-bf527/boards/ezkit.c | 9 +----
arch/blackfin/mach-bf533/boards/ezkit.c | 6 +---
arch/blackfin/mach-bf533/boards/stamp.c | 10 ++----
arch/blackfin/mach-bf537/boards/stamp.c | 9 +----
arch/blackfin/mach-bf548/boards/ezkit.c | 10 ++----
arch/blackfin/mach-bf561/boards/ezkit.c | 9 ++---
drivers/serial/bfin_5xx.c | 40 +++++---------------
include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 6 +++
include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 6 +++
include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 6 +++
include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 6 +++
include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 6 +++
13 files changed, 57 insertions(+), 74 deletions(-)
Graf Yang (1):
Blackfin serial driver: fix up tty core set_ldisc API change breakage bug
Mike Frysinger (2):
Blackfin arch: fixup warnings with the new cplb saved values
Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN
Sonic Zhang (1):
Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 7bfbd95..f061f51 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -67,7 +67,7 @@ void __init trap_init(void)
CSYNC();
}
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
int kstack_depth_to_print = 48;
@@ -366,7 +366,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
- if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START)
+ if (saved_dcplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "NULL pointer access\n");
else
#endif
@@ -421,7 +421,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
- if (saved_icplb_fault_addr < (void *)FIXED_CODE_START)
+ if (saved_icplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "Jump to NULL address\n");
else
#endif
@@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
oops_in_progress = 1;
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c
b/arch/blackfin/mach-bf527/boards/ezkit.c
index fa4f4e8..5958eec 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[]
__initdata = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -1018,10 +1016,7 @@ static int __init stamp_init(void)
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c
b/arch/blackfin/mach-bf533/boards/ezkit.c
index 9d28415..079389c 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -87,9 +87,6 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[]
__initdata = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -425,9 +423,7 @@ static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c
b/arch/blackfin/mach-bf533/boards/stamp.c
index ec05b23..13ae495 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -161,9 +161,6 @@ static struct platform_device stamp_flash_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -320,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[]
__initdata = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -626,10 +624,8 @@ static int __init stamp_init(void)
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c
b/arch/blackfin/mach-bf537/boards/stamp.c
index 9a756d1..671f9d6 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[]
__initdata = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -939,10 +937,7 @@ static int __init stamp_init(void)
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c
b/arch/blackfin/mach-bf548/boards/ezkit.c
index d1682bb..af7c211 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
@@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
};
#endif
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
@@ -527,6 +525,7 @@ static struct spi_board_info
bf54x_spi_board_info[] __initdata = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -800,10 +799,7 @@ static int __init ezkit_init(void)
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bf54x_spi_board_info,
- ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c
b/arch/blackfin/mach-bf561/boards/ezkit.c
index 61d8f76..bc6fede 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = {
};
#endif
-#ifdef CONFIG_SPI_BFIN
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
.bits_per_word = 8,
};
#endif
-#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = {
.platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
+#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
@@ -537,10 +537,7 @@ static int __init ezkit_init(void)
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead..f20952c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct
uart_port *port)
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
@@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct
uart_port *port, unsigned int mctrl)
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
@@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
@@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -833,15 +813,15 @@ bfin_serial_verify_port(struct uart_port *port,
struct serial_struct *ser)
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
@@ -866,6 +846,7 @@ static struct uart_ops bfin_serial_pops = {
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
@@ -1206,7 +1187,6 @@ static int __init bfin_serial_init(void)
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 26e3c80..96bd09e 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index d016603..e924569 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index f79d1a0..41d7b64 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 5eb46a7..59b4ad4 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -57,6 +57,12 @@
#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */
#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 7a96287..30d90b5 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart,
UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists