linux-kernel - Re: bug? acpi p-state + ondemand keeps dropping max freq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <alpine.LFD.1.10.0806062240410.3110@localhost.localdomain>
Date:	Fri, 06 Jun 2008 22:46:17 -0400 (EDT)
From:	Len Brown <lenb@...nel.org>
To:	"Kok, Auke" <auke-jan.h.kok@...el.com>
Cc:	linux-acpi@...r.kernel.org,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Dave Jones <davej@...emonkey.org.uk>,
	"Brown, Len" <len.brown@...el.com>, cpufreq@...ts.linux.org.uk
Subject: Re: bug? acpi p-state + ondemand keeps dropping max freq



On Thu, 5 Jun 2008, Kok, Auke wrote:

> 
> I've consistently experienced the following bizarre problem since 2.6.20, all the
> way up to 2.6.25.3 (regressed yesterday and each of these kernels exposes this
> behaviour):
> 
> /sys/devices/system/cpu/cpu0/cpufreq # grep . *
> affected_cpus:0
> cpuinfo_cur_freq:800000
> cpuinfo_max_freq:1866000
> cpuinfo_min_freq:800000
> scaling_available_frequencies:1866000 1600000 1333000 1066000 800000
> scaling_available_governors:ondemand performance
> scaling_cur_freq:800000
> scaling_driver:acpi-cpufreq
> scaling_governor:ondemand
> scaling_max_freq:800000
> scaling_min_freq:800000
> 
> 
> 
> Notice that scaling_mx_freq dropped down to the lowest possible value and as such
> my CPU is only working at 800MHz. At boot time this field properly displays
> 1866MHz and everything works OK. After a certain period (?) this value drops down
> and I cannot manually elevate it back to the normal level:
> 
> # echo 1866000 > scaling_max_freq ; cat scaling_max_freq
> 800000
> # echo 1866000 > scaling_max_freq ; cat scaling_max_freq
> 800000
> 
> 
> This renders my Dothan to utterly poor speeds. (standard T43)
> 
> performance cpufreq governor makes no difference - I still can't change the
> frequency upper/lower values.

could be two causes:
1. thermal
2. user space

for #1....

watch grep . /proc/acpi/thermal_zone/THM*/*
and see if anythign is climbing
you can build w/o CONFIG_ACPI_THERMAL
and see if they symptom goes away -- for that
is the module which would force cpufreq to Pn.


for #2...

see if it happens in single user mode without
hal or distro daemons running.

cheers,
-Len

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/