linux-kernel - Re: [2.6.26-rc4] Problems with rt2x00 USB interface on powerpc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20080608001143.GB10775@ime.usp.br>
Date:	Sat, 7 Jun 2008 21:11:44 -0300
From:	Rogério Brito <rbrito@....usp.br>
To:	"John W. Linville" <linville@...driver.com>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: [2.6.26-rc4] Problems with rt2x00 USB interface on powerpc

Hi, again, John.

On Jun 07 2008, John W. Linville wrote:
> On Fri, Jun 06, 2008 at 09:52:27PM -0300, Rog?rio Brito wrote:
> > I have taken dmesg "snapshots" of my system together with many other
> > information regarding how it is configured and I put it at my
> > homepage, at <http://www.ime.usp.br/debug/>.
> 
> 404

I think that you should have received a later reply telling about the typo
in the address above. It should have been:
<http://www.ime.usp.br/~rbrito/debug/>.

> > >From what I am seeing, it looks like the bug mentioned in
> > <http://bugzilla.kernel.org/show_bug.cgi?id=9388>, but I don't get the
> > stack trace that is present there and I'm just trying to use WEP
> > instead of WPA or anything fancier.
> 
> Did you apply this patch?
> 
> 	http://bugzilla.kernel.org/attachment.cgi?id=14384

No, I did not. Is it still relevant with -rc4 or with -rc5? I still get the
same problem with -rc5 (but I will have to test it a bit more with -rc5).
Just as a refresher:

* I can set everything on the iBook with the wireless key plugged;
* The wireless key *sees* the AP, even with encryption (that is, it grabs
  the MAC address of the AP, it (sometimes) shows me the signal strength,
  and if I issue "iwconfig wlan0 ap any", I see both the led of the
  wireless key blink and an increase of amount of data transmitted and
  received with "ifconfig wlan0");
* With everything set this way, if I do "dhclient wlan0", it doesn't get a
  lease from the AP---actually, despite the fact that it is possible to see
  the other point, dhclient goes, after some attempts of getting a lease,
  to background, but no address is ever gotten;
* Just to rule out possible problems with something sent to the address
  255.255.255.255 (which is reported as being done by dhclient), I tried to
  configure the address by hand via ifconfig, but, for instance, I couldn't
  ping my AP (which I can from other computers with a rt61pci driver and a
  PCMCIA connection);
* As I mentioned above, I have no problems with the rt61pci driver, but the
  USB one doesn't seem to work (unfortunately, the iBook does not have a
  PCMCIA slot). With a notebook with an on-board Intel wireless card, I
  *also* don't have any problems.

Well, thanks, for the help so far. I hope that we can solve this issue
quite soon, as I need this iBook for work.

I am willing to help as much as I can and test anything (even something
that might be "experimental"). I think that this is as good a tester that
you can get, right? :-)

Thanks, Rogério Brito.

-- 
Rogério Brito : rbrito@...ckenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/