Message-ID: <20080608220934.GA22242@ime.usp.br>
Date:	Sun, 8 Jun 2008 19:09:34 -0300
From:	Rogério Brito <rbrito@....usp.br>
To:	Ivo van Doorn <ivdoorn@...il.com>
Cc:	"John W. Linville" <linville@...driver.com>,
	linux-kernel@...r.kernel.org
Subject: Re: [2.6.26-rc4] Problems with rt2x00 USB interface on powerpc

Hi, Ivo.

Thank you very much for your very kind reply.

On Jun 09 2008, Ivo van Doorn wrote:
> Hi,
> 
> > Nice to know that. I saw that the code has changed quite a good
> > amount...
> 
> Hehe, yes rt2x00 code is moving quit a lot per kernel release.

Granted. :-) You have been working quite a lot. :-)

> > Anyway, I don't know if you saw the various outputs that I put at my
> > homepage (lots of dmesgs with the 2.6.26-rc4 kernel):
> > http://www.ime.usp.br/~rbrito/debug/
> 
> Yeah, saw them.

Hope that they prove somewhat useful.

> > > > I don't know if the firmware is needed in my case or not, though (my USB
> > > > adaptor is a D-Link DWL-G122 H/W Ver. B1, F/W Ver.: 2.03---took that info
> > > > from the back of the stick).
> > > 
> > > Which driver is actually being used? rt2500usb or rt73usb?
> > 
> > The driver that actually gets loaded is rt2500usb. I tried rmmod'ing
> > rt2500usb and loading rt73usb, but a quick iwconfig doesn't even show
> > the interfaces.
> 
> That means it really is a rt2500usb device. ;)

Yes. :) I have firmware files installed under /lib/firmware also (taken
from Debian's unstable release---which is what I am using). Are they
needed?

> > > Also what was the last kernel version on which the driver worked for
> > > you?
> > 
> > Unfortunately, I don't have any kernel for which this has worked for
> > me. I just did an experiment: I plugged the adaptor on a ia32
> > notebook where a rt61pci works fine (it is running Ubuntu's
> > Hardy---well, actually, there are some problems, but I can get to
> > that latter), but the USB key was non working with the symptoms that
> > I described above.
> 
> That is most unfortunate, since register dumps are usually most usefull when
> I can compare the actual register values between a working and
> non-working setup.

Ok. I will try to compile an 2.6.18 kernel with the out-of-tree modules.
I hope that this can prove useful. I plan on getting register dumps (and
I also hope that it will work; perhaps getting the register values with
the legacy rt2500 drivers would help you, if they are available at all.
I don't even know if they will work here, but I guess that I will give
them a shot).

> However I just realized I had a D-Link stick myself, and apparently I have the exact
> same model/type. I'll compile a 2.6.26-rc5 kernel and see if that stick works for me,
> if so, I have the working register dump. And if not, then we can rule
> out endian problems.

Thank you so much.

I will compile other versions of the kernel just to see if I can see the
status of the driver with other versions of kernels/drivers. Since I
just installed a cross-compiler yesterday night on a *much* faster
machine, I don't have to wait more than 1 hour for each kernel
modification that I make (this iBook is slow).

As I said earlier, I plan on doing whatever test you want me to.


Thanks, Rogério Brito.

-- 
Rogério Brito : rbrito@...ckenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists