| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1213006112-25965-1-git-send-email-jirislaby@gmail.com>
Date: Mon, 9 Jun 2008 12:08:26 +0200
From: Jiri Slaby <jirislaby@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Jiri Slaby <jirislaby@...il.com>
Subject: [PATCH] Char: mxser, ioctl cleanup
- remove break ctl from ioctl handler, it's never reached, since
tty_ops->break_ctl is defined (mxser break handling is done in software)
- mark MOXA_GET_MAJOR as deprecated
- fix TIOCGICOUNT (some retval non-checks of put_user). Use copy_to_user
to whole structure instead.
Signed-off-by: Jiri Slaby <jirislaby@...il.com>
---
drivers/char/mxser.c | 78 ++++++++++++-------------------------------------
1 files changed, 19 insertions(+), 59 deletions(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 4b81a85..644202c 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -16,7 +16,6 @@
* Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
* <alan@...hat.com>. The original 1.8 code is available on www.moxa.com.
* - Fixed x86_64 cleanness
- * - Fixed sleep with spinlock held in mxser_send_break
*/
#include <linux/module.h>
@@ -1473,27 +1472,6 @@ static int mxser_get_lsr_info(struct mxser_port *info,
return put_user(result, value);
}
-/*
- * This routine sends a break character out the serial port.
- */
-static void mxser_send_break(struct mxser_port *info, int duration)
-{
- unsigned long flags;
-
- if (!info->ioaddr)
- return;
- set_current_state(TASK_INTERRUPTIBLE);
- spin_lock_irqsave(&info->slock, flags);
- outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
- info->ioaddr + UART_LCR);
- spin_unlock_irqrestore(&info->slock, flags);
- schedule_timeout(duration);
- spin_lock_irqsave(&info->slock, flags);
- outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
- info->ioaddr + UART_LCR);
- spin_unlock_irqrestore(&info->slock, flags);
-}
-
static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
{
struct mxser_port *info = tty->driver_data;
@@ -1662,6 +1640,8 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
switch (cmd) {
case MOXA_GET_MAJOR:
+ printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix "
+ "your userspace\n", current->comm, cmd);
return put_user(ttymajor, (int __user *)argp);
case MOXA_CHKPORTENABLE:
@@ -1832,7 +1812,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
{
struct mxser_port *info = tty->driver_data;
struct async_icount cnow;
- struct serial_icounter_struct __user *p_cuser;
unsigned long flags;
void __user *argp = (void __user *)arg;
int retval;
@@ -1881,21 +1860,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return -EIO;
switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- mxser_send_break(info, HZ / 4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
- return 0;
case TIOCGSERIAL:
lock_kernel();
retval = mxser_get_serial_info(info, argp);
@@ -1927,30 +1891,26 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
- case TIOCGICOUNT:
+ case TIOCGICOUNT: {
+ struct serial_icounter_struct icnt = { 0 };
spin_lock_irqsave(&info->slock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->slock, flags);
- p_cuser = argp;
- if (put_user(cnow.frame, &p_cuser->frame))
- return -EFAULT;
- if (put_user(cnow.brk, &p_cuser->brk))
- return -EFAULT;
- if (put_user(cnow.overrun, &p_cuser->overrun))
- return -EFAULT;
- if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- return -EFAULT;
- if (put_user(cnow.parity, &p_cuser->parity))
- return -EFAULT;
- if (put_user(cnow.rx, &p_cuser->rx))
- return -EFAULT;
- if (put_user(cnow.tx, &p_cuser->tx))
- return -EFAULT;
- put_user(cnow.cts, &p_cuser->cts);
- put_user(cnow.dsr, &p_cuser->dsr);
- put_user(cnow.rng, &p_cuser->rng);
- put_user(cnow.dcd, &p_cuser->dcd);
- return 0;
+
+ icnt.frame = cnow.frame;
+ icnt.brk = cnow.brk;
+ icnt.overrun = cnow.overrun;
+ icnt.buf_overrun = cnow.buf_overrun;
+ icnt.parity = cnow.parity;
+ icnt.rx = cnow.rx;
+ icnt.tx = cnow.tx;
+ icnt.cts = cnow.cts;
+ icnt.dsr = cnow.dsr;
+ icnt.rng = cnow.rng;
+ icnt.dcd = cnow.dcd;
+
+ return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
+ }
case MOXA_HighSpeedOn:
return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
case MOXA_SDS_RSTICOUNTER:
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists