| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1213006112-25965-5-git-send-email-jirislaby@gmail.com>
Date: Mon, 9 Jun 2008 12:08:30 +0200
From: Jiri Slaby <jirislaby@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Jiri Slaby <jirislaby@...il.com>
Subject: [PATCH] Char: mxser, prints cleanup
- use dev_* for printing in pci probe function
- move ISA p[rints directly into isa find function, do not postpone it.
Remove macros bound to it then.
- prepend some prints by "mxser: " to know what it belongs to
Signed-off-by: Jiri Slaby <jirislaby@...il.com>
---
drivers/char/mxser.c | 80 +++++++++++++++++++++++---------------------------
1 files changed, 37 insertions(+), 43 deletions(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 060fee9..800b609 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -55,11 +55,6 @@
#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
#define MXSER_ISR_PASS_LIMIT 100
-#define MXSER_ERR_IOADDR -1
-#define MXSER_ERR_IRQ -2
-#define MXSER_ERR_IRQ_CONFLIT -3
-#define MXSER_ERR_VECTOR -4
-
/*CheckIsMoxaMust return value*/
#define MOXA_OTHER_UART 0x00
#define MOXA_MUST_MU150_HWID 0x01
@@ -2490,7 +2485,8 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
unsigned int i;
int retval;
- printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud);
+ printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
+ brd->ports[0].max_baud);
for (i = 0; i < brd->info->nports; i++) {
info = &brd->ports[i];
@@ -2573,28 +2569,32 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
if (irq != (regs[9] & 0xFF00))
- return MXSER_ERR_IRQ_CONFLIT;
+ goto err_irqconflict;
} else if (brd->info->nports == 4) {
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
irq = irq | (irq >> 8);
if (irq != regs[9])
- return MXSER_ERR_IRQ_CONFLIT;
+ goto err_irqconflict;
} else if (brd->info->nports == 8) {
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
irq = irq | (irq >> 8);
if ((irq != regs[9]) || (irq != regs[10]))
- return MXSER_ERR_IRQ_CONFLIT;
+ goto err_irqconflict;
}
- if (!irq)
- return MXSER_ERR_IRQ;
+ if (!irq) {
+ printk(KERN_ERR "mxser: interrupt number unset\n");
+ return -EIO;
+ }
brd->irq = ((int)(irq & 0xF000) >> 12);
for (i = 0; i < 8; i++)
brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
- if ((regs[12] & 0x80) == 0)
- return MXSER_ERR_VECTOR;
+ if ((regs[12] & 0x80) == 0) {
+ printk(KERN_ERR "mxser: invalid interrupt vector\n");
+ return -EIO;
+ }
brd->vector = (int)regs[11]; /* interrupt vector */
if (id == 1)
brd->vector_mask = 0x00FF;
@@ -2621,13 +2621,26 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
else
brd->uart_type = PORT_16450;
if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
- "mxser(IO)"))
- return MXSER_ERR_IOADDR;
+ "mxser(IO)")) {
+ printk(KERN_ERR "mxser: can't request ports I/O region: "
+ "0x%.8lx-0x%.8lx\n",
+ brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+ 8 * brd->info->nports - 1);
+ return -EIO;
+ }
if (!request_region(brd->vector, 1, "mxser(vector)")) {
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- return MXSER_ERR_VECTOR;
+ printk(KERN_ERR "mxser: can't request interrupt vector region: "
+ "0x%.8lx-0x%.8lx\n",
+ brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+ 8 * brd->info->nports - 1);
+ return -EIO;
}
return brd->info->nports;
+
+err_irqconflict:
+ printk(KERN_ERR "mxser: invalid interrupt number\n");
+ return -EIO;
}
static int __devinit mxser_probe(struct pci_dev *pdev,
@@ -2644,20 +2657,20 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
break;
if (i >= MXSER_BOARDS) {
- printk(KERN_ERR "Too many Smartio/Industio family boards found "
- "(maximum %d), board not configured\n", MXSER_BOARDS);
+ dev_err(&pdev->dev, "too many boards found (maximum %d), board "
+ "not configured\n", MXSER_BOARDS);
goto err;
}
brd = &mxser_boards[i];
brd->idx = i * MXSER_PORTS_PER_BOARD;
- printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+ dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
mxser_cards[ent->driver_data].name,
pdev->bus->number, PCI_SLOT(pdev->devfn));
retval = pci_enable_device(pdev);
if (retval) {
- printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+ dev_err(&pdev->dev, "PCI enable failed\n");
goto err;
}
@@ -2807,33 +2820,14 @@ static int __init mxser_module_init(void)
brd = &mxser_boards[m];
retval = mxser_get_ISA_conf(cap, brd);
-
- if (retval != 0)
- printk(KERN_INFO "Found MOXA %s board "
- "(CAP=0x%x)\n",
- brd->info->name, ioaddr[b]);
-
if (retval <= 0) {
- if (retval == MXSER_ERR_IRQ)
- printk(KERN_ERR "Invalid interrupt "
- "number, board not "
- "configured\n");
- else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk(KERN_ERR "Invalid interrupt "
- "number, board not "
- "configured\n");
- else if (retval == MXSER_ERR_VECTOR)
- printk(KERN_ERR "Invalid interrupt "
- "vector, board not "
- "configured\n");
- else if (retval == MXSER_ERR_IOADDR)
- printk(KERN_ERR "Invalid I/O address, "
- "board not configured\n");
-
brd->info = NULL;
continue;
}
+ printk(KERN_INFO "mxser: found MOXA %s board "
+ "(CAP=0x%x)\n", brd->info->name, ioaddr[b]);
+
/* mxser_initbrd will hook ISR. */
if (mxser_initbrd(brd, NULL) < 0) {
brd->info = NULL;
@@ -2850,7 +2844,7 @@ static int __init mxser_module_init(void)
retval = pci_register_driver(&mxser_driver);
if (retval) {
- printk(KERN_ERR "Can't register pci driver\n");
+ printk(KERN_ERR "mxser: can't register pci driver\n");
if (!m) {
retval = -ENODEV;
goto err_unr;
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists