| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 9 Jun 2008 13:31:24 +0200
From: Haavard Skinnemoen <haavard.skinnemoen@...el.com>
To: David Brownell <david-b@...bell.net>
Cc: lkml <linux-kernel@...r.kernel.org>, linux-mtd@...ts.infradead.org,
Nicolas Ferre <nicolas.ferre@....atmel.com>
Subject: Re: [patch 2.6.26-rc5-git] at91_nand speedup via
{read,write}s{b,w}()
David Brownell <david-b@...bell.net> wrote:
> This uses __raw_{read,write}s{b,w}() primitives to access data on NAND
> chips for more efficient I/O.
>
> On an arm926 with memory clocked at 100 MHz, this reduced the elapsed
> time for a 64 MByte read by 16%. ("dd" /dev/mtd0 to /dev/null, with
> an 8-bit NAND using hardware ECC and 128KB blocksize.)
Nice. Here are some numbers from my setup (256 MB, 8-bit, software ECC).
Before:
real 2m38.131s
user 0m0.228s
sys 2m37.740s
After:
real 2m27.404s
user 0m0.180s
sys 2m27.068s
which is a 6.8% speedup. I guess hardware ECC helps...though I can't
seem to get it to work properly. Is there anything I need to do besides
flash_eraseall when changing the ECC layout?
Also, I wonder if we can use the DMA engine framework to get rid of all
that "sys" time...?
> Also some minor section tweaks:
>
> - Use platform_driver_probe() so no pointer to probe() lingers
> after that code has been removed at run-time.
>
> - Use __exit and __exit_p so the remove() code will normally be
> removed by the linker.
>
> Since these buffer read/write calls are new, this increases the runtime
> code footprint (by 88 bytes on my build, after the section tweaks).
Yeah, I spotted a bug in __raw_readsb on avr32, so I guess those
functions haven't actually been used before...
> Signed-off-by: David Brownell <dbrownell@...rs.sourceforge.net>
> ---
> Yeah, this does may you wonder why the *default* nand r/w code isn't
> using these primitives; this speedup shouldn't be platform-specific.
>
> Posting this now since I think this should either be incorporated into
> the new atmel_nand.c code or into drivers/mtd/nand/nand_base.c ...
> both arm and avr32 support these calls, I'm not sure whether or not
> some platforms don't support them.
I'll leave it up to the MTD people to decide whether or not to update
nand_base.c. Below is your patch rebased onto my patchset. I'll include
it in my next series after I figure out where to send it.
Haavard
>From ad420ea11f9c8aa0fcad2ce1c3af69c02a2dc447 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@...bell.net>
Date: Mon, 9 Jun 2008 03:13:28 -0700
Subject: [PATCH] atmel_nand speedup via {read,write}s{b,w}()
This uses __raw_{read,write}s{b,w}() primitives to access data on NAND
chips for more efficient I/O.
On an arm926 with memory clocked at 100 MHz, this reduced the elapsed
time for a 64 MByte read by 16%. ("dd" /dev/mtd0 to /dev/null, with
an 8-bit NAND using hardware ECC and 128KB blocksize.)
Also some minor section tweaks:
- Use platform_driver_probe() so no pointer to probe() lingers
after that code has been removed at run-time.
- Use __exit and __exit_p so the remove() code will normally be
removed by the linker.
Since these buffer read/write calls are new, this increases the runtime
code footprint (by 88 bytes on my build, after the section tweaks).
Signed-off-by: David Brownell <dbrownell@...rs.sourceforge.net>
[haavard.skinnemoen@...el.com: rebase onto atmel_nand rename]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@...el.com>
---
drivers/mtd/nand/atmel_nand.c | 46 ++++++++++++++++++++++++++++++++++++----
1 files changed, 41 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 325ce29..d9f7a5d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -142,6 +142,37 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
}
/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
+/*
* write oob for small pages
*/
static int atmel_nand_write_oob_512(struct mtd_info *mtd,
@@ -436,8 +467,14 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 20; /* 20us command delay time */
- if (host->board->bus_width_16) /* 16-bit bus width */
+ if (host->board->bus_width_16) { /* 16-bit bus width */
nand_chip->options |= NAND_BUSWIDTH_16;
+ nand_chip->read_buf = atmel_read_buf16;
+ nand_chip->write_buf = atmel_write_buf16;
+ } else {
+ nand_chip->read_buf = atmel_read_buf;
+ nand_chip->write_buf = atmel_write_buf;
+ }
platform_set_drvdata(pdev, host);
atmel_nand_enable(host);
@@ -546,7 +583,7 @@ err_nand_ioremap:
/*
* Remove a NAND device.
*/
-static int __devexit atmel_nand_remove(struct platform_device *pdev)
+static int __exit atmel_nand_remove(struct platform_device *pdev)
{
struct atmel_nand_host *host = platform_get_drvdata(pdev);
struct mtd_info *mtd = &host->mtd;
@@ -564,8 +601,7 @@ static int __devexit atmel_nand_remove(struct platform_device *pdev)
}
static struct platform_driver atmel_nand_driver = {
- .probe = atmel_nand_probe,
- .remove = atmel_nand_remove,
+ .remove = __exit_p(atmel_nand_remove),
.driver = {
.name = "atmel_nand",
.owner = THIS_MODULE,
@@ -574,7 +610,7 @@ static struct platform_driver atmel_nand_driver = {
static int __init atmel_nand_init(void)
{
- return platform_driver_register(&atmel_nand_driver);
+ return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
}
--
1.5.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists