| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6278d2220806091259t47c9b070v269da0f5855ef014@mail.gmail.com>
Date: Mon, 9 Jun 2008 20:59:00 +0100
From: "Daniel J Blueman" <daniel.blueman@...il.com>
To: "Takashi Iwai" <tiwai@...e.de>
Cc: "Linux Kernel" <linux-kernel@...r.kernel.org>
Subject: ALC883 recording troubles...
Hi Takashi-san,
I'm experiencing DC offset with the microphone on 2.6.24 (Ubuntu 8.04
LTS x86-64). I can see on Audacity that the DC offset that varies with
the recording capture level. Plus, the mixer playback->mic-boost
muting enables/disables mic-boost in recording.
It feels like the ALC883 pins aren't configured quite right. The mobo
is an Asus P5E-VM with current BIOS [1]
What's the routine to debug this? Would it help to install windows,
dump the register space and compare?
Thanks in advance,
Daniel
--- [1]
$ sudo lspci -vvvxxxs 0:1b.0
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 829f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe9f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00: 86 80 3e 29 06 00 10 00 02 00 03 04 08 00 00 00
10: 04 80 9f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 9f 82
30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 01 00 00
40: 01 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 91 00 00 00 00 10 00 08 10 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 04 00 01 00 00 00 00 31 00 a3 02 00 00 00 00
d0: 61 00 a3 02 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
daniel@...ron:~$ aplay -L
default:CARD=Intel
HDA Intel, ALC883 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC883 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=U0x46d0x990
USB Device 0x46d:0x990, USB Audio
Default Audio Device
front:CARD=U0x46d0x990,DEV=0
USB Device 0x46d:0x990, USB Audio
Front speakers
surround40:CARD=U0x46d0x990,DEV=0
USB Device 0x46d:0x990, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=U0x46d0x990,DEV=0
USB Device 0x46d:0x990, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=U0x46d0x990,DEV=0
USB Device 0x46d:0x990, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=U0x46d0x990,DEV=0
USB Device 0x46d:0x990, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=U0x46d0x990,DEV=0
USB Device 0x46d:0x990, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=U0x46d0x990,DEV=0
USB Device 0x46d:0x990, USB Audio
IEC958 (S/PDIF) Digital Audio Output
front:CARD=HDMI
HDA ATI HDMI
Front speakers
surround40:CARD=HDMI
HDA ATI HDMI
4.0 Surround output to Front and Rear speakers
surround41:CARD=HDMI
HDA ATI HDMI
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=HDMI
HDA ATI HDMI
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=HDMI
HDA ATI HDMI
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=HDMI
HDA ATI HDMI
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
--
Daniel J Blueman
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists